7764fe94e4
docs: progress: rev 2 draft case (not printed) and the measurements and fit check it waits on
main
rich2026-11-19 23:15:24 -05:00
26a8387a6e
hardware: SB-LoRa rev 2 draft case: a two-part OpenSCAD shell for FDM, the in-slot part from nkorth's CC0 Springboard slot cover, a bump for the radio boards, LiPo and an FPC antenna, split at the board's top face with two M2 screws; the connector height, J1 body and radio/LiPo heights are parameters to measure
rich2026-11-19 23:09:41 -05:00
1e32aea88c
docs: progress: rev 2 J1 laid out as a straddle with estimated row position, pad size and thickness; measuring the parts is next
rich2026-11-19 23:01:54 -05:00
1d43beeabf
hardware: SB-LoRa rev 2 J1 as a straddle for the MCS-068SMA1: pins 1-34 on F.Cu, 35-68 on B.Cu directly opposite at 1.27 mm (rev 1's split); row position, pad size and board thickness are estimates until a part is measured. Rerouted: DRC 0 unconnected, verify.py checks the straddle and passes; renders regenerated
rich2026-11-19 22:58:16 -05:00
f5653d9d2c
docs: SB-LoRa rev 2: show the top and bottom renders in REV2.md, noting they still have the placeholder J1
rich2026-11-19 22:50:06 -05:00
7b4e23ad64
docs: progress: SB-LoRa rev 2 milestones (planned, laid out, J1 chosen and ordered), the cancelled rev 1 J1, the release workflow, and the J1 supply and board-thickness questions
rich2026-11-19 22:43:43 -05:00
fdacc2daa8
docs: SB-LoRa rev 2 connector: the MCS-068SMA1 straddle parts are ordered (2026-11-19) and J1 is designed around them; no stock of the single-row MCS-068SSA1 turned up
rich2026-11-19 22:41:33 -05:00
f41ddf43bd
docs: SB-LoRa rev 2 connector: the MCS-068SMA1 is Robinson Nugent's MEMPAK straddle receptacle (.050" pitch, no tail offset) per the catalogue overview page; the row gap still needs a sample, and the single-row MCS-068SSA1 is noted as a single-sided alternative
rich2026-11-19 22:39:18 -05:00
ef1d245c73
docs: SB-LoRa rev 2 connector: 3M MCS-068SMA1-TR30 (female straddle receptacle, eBay surplus, rows not staggered) replaces the AliExpress part as the J1 candidate, which is dropped for $39 shipping and a 2+ week wait; the J1 pattern becomes opposed F.Cu/B.Cu rows and the board thickness follows the connector's row gap
rich2026-11-19 22:30:01 -05:00
fff912fb4d
docs: SB-LoRa rev 2 connector: the J1 listing photo shows an AMP-marked part with no part number but it's sold as Jiansu BST, so the land pattern comes from the parts that arrive and they're bought in one lot
rich2026-11-19 22:19:53 -05:00
e71f979dce
docs: SB-LoRa rev 2 connector: the AliExpress 68-pin female PCMCIA part is the J1 candidate (female side, both rows of tails flat on top per the listing photos); its land pattern waits on a measured sample, and the Hirose IC1K listing looks like a host-side socket
rich2026-11-19 22:18:32 -05:00
0e37755b66
docs: SB-LoRa rev 2 connector: drop the unconfirmed Amphenol 1C1K candidate and list the parts ruled out (out of production, host-side, or a SIM tray), so J1 has no stocked candidate yet
rich2026-11-19 22:10:04 -05:00
ecd9900ec1
hardware: SB-LoRa rev 2 layout: 4 layers (In1 GND plane), flash, UART and logic in the slot, XIAO and Wio side by side, LiPo pads underneath; routed with Freerouting 1.9.0, DRC 0 unconnected, verify.py passes. J1 is a parametric placeholder until a single-sided card-side receptacle is chosen, so it isn't ready to order; the UART footprint becomes NXP's SOT617-1 (EP 3.1 mm), and REV2.md drops TE 5535657, which is the host-side header
rich2026-11-17 20:35:15 -05:00
6d4cadadbc
docs: SB-LoRa temporary connector options for rev 1 now the Hirose IC1HA order is cancelled (harvested straddle, donor connector on wires, top-mounted SMT receptacle, PCMCIA card part), with the 17 pins rev 1 uses; rev 2 drops the straddle footprint
rich2026-11-17 19:20:57 -05:00
fec5a03358
palm-client: release workflow: a v* tag builds and tests the app and publishes visormesh-<tag>.prc with SHA256SUMS as a release; the toolchain install moves to tools/install_toolchain.sh so CI and the Dockerfile share the pinned versions
v0.1
rich2026-11-11 16:49:05 -05:00
00feaffca5
hardware: SB-LoRa rev 2 footprints for the XIAO (flat or by its header, bottom BAT/SWD pads through solder-filled holes), the Wio (14 holes) and the LiPo pads, generated from Seeed's own KiCad files
rich2026-11-09 15:17:32 -05:00
bbfb334431
hardware: SB-LoRa rev 2 LCSC numbers for the flash (C914935), OR gate (C91874), inverters (C105251) and dual translator (C15741)
rich2026-11-09 15:12:25 -05:00
440845684c
hardware: SB-LoRa rev 2 flash pinout checked against the S29AL016J datasheet; it reads as an Am29LV160BB to Handspring's flash driver
rich2026-11-09 15:10:31 -05:00
de88c7a7a1
hardware: SB-LoRa rev 2 netlist draft: S29AL016J flash on CS0, SC16C650B UART on CS1 with OR-gated strobes (the slot can assert OE*/WE* with CS1*, the UART wants 10 ns after CS), XIAO and Wio side by side, battery and SWD pads. Plan: the flash's installer copies the app to RAM, since the transport's interrupt handler can't live on a removable module; battery sizing estimate
rich2026-11-09 13:46:56 -05:00
f33f5d18dc
docs: SB-LoRa rev 2 plan: keep the flash, and replace the SC16IS740 SPI bridge with a 16550-style UART on CS1*, since the flash already needs the full bus
rich2026-11-09 13:38:47 -05:00
4dd5e5893d
docs: SB-LoRa rev 2 plan: how the app gets onto the flash (make rom, an updater .prc run from RAM, Handspring's MakeROM and Flash Manager sources as the base)
rich2026-11-09 13:37:25 -05:00
99b66a2cf9
docs: SB-LoRa rev 2 plan: running from the module's flash leaves the app's features intact (all data is in RAM databases); note the copy-to-RAM alternative
rich2026-11-09 13:30:49 -05:00
62d22b59dc
docs: SB-LoRa rev 2 plan: the Wio's underside is bare, so it sits flush on the carrier
rich2026-11-09 13:18:52 -05:00
189091e462
docs: SB-LoRa rev 2 plan: the Wio's 8 mm top socket comes off; it was the tallest part once the XIAO moves alongside
rich2026-11-09 13:18:21 -05:00
460b82a214
docs: SB-LoRa rev 2 plan: the Wio mounts by its own male pins through the carrier; its unused top socket is the tallest part and may come off
rich2026-11-09 13:16:56 -05:00
41043065f2
docs: SB-LoRa rev 2 plan: correct the battery cut-out note (rev 1 has none)
rich2026-11-09 13:15:26 -05:00
14920abb52
docs: SB-LoRa rev 2 plan: reach the XIAO's bottom BAT and SWD pads through solder-filled plated holes in the carrier, so it can sit flat with no gap for battery wires
rich2026-11-09 13:15:21 -05:00
d1be438e63
docs: SB-LoRa rev 2 plan: the XIAO and Wio unplug from each other, so side by side needs only the XIAO's pin header dealt with; drop the stacked fallback
rich2026-11-09 13:13:08 -05:00
2fc4aa6203
docs: SB-LoRa rev 2 plan: connector change waits on the Hirose order; the XIAO and Wio come soldered together, so side by side means separating them, with a headerless stack as the fallback
rich2026-11-09 13:11:08 -05:00
a4a70fb3eb
docs: SB-LoRa rev 2 plan: XIAO and Wio side by side instead of stacked, a CS0 flash so the app loads on insertion, and a single-sided PC Card connector in place of the obsolete Hirose straddle part; lists what's still open
rich2026-11-09 13:08:29 -05:00
0136ed96ab
docs: layout fixes and New Key verified on the Neo
rich2026-11-08 19:42:55 -05:00
52f3f09a13
docs: AGENTS.md covers the try-once check and make replay
rich2026-11-08 19:39:02 -05:00
4b05bf25d5
palm-client: Add Channel's New Key (private channels) fills in a random key from a pool fed by what can't be predicted: the exact tick and position of every pen and key event, and the signal readings of every packet the radio reports. Samples are folded into a SHA-256 pool, a key is a hash of it, and the pool moves on after each; it's kept between launches in an unsaved preference (never in a backup). Until 256 samples have come in, New Key asks for a few seconds of stylus movement. Host-tested in tests/test_entropy.c
rich2026-11-08 19:38:55 -05:00
2c32033292
palm-client: check_ui.py fails the build when two drawn form objects overlap (a label running into its value or a button); it reads each object's usable bit so popup lists shown by the code don't count
rich2026-11-08 19:35:47 -05:00
18c55ef8aa
palm-client: three labels no longer run into what follows them: Node's 'Firmware:' is 'Version:', Preferences' Check when closed trigger moved right (its choices are '5 min' to '1 hour' so the longest still fits), and Flood Scopes' default moved right
rich2026-11-08 19:35:47 -05:00
6c17e25a76
palm-client: the request retry rules are in request.c (session.c supplies the link), host-tested with a scripted link in tests/test_request.c: a frame that went out is sent again only while tries allows, one that didn't go is resent up to 4 times without using up tries, one cut off part way never is. check_source.py checks that the functions that send over the air or take a queued message (messages, reactions, adverts, syncs, logins, traces) only ever use tries 1
rich2026-11-08 19:34:16 -05:00
e068a51768
palm-client: plain make builds the app again (the replay target had become the default goal)
rich2026-11-08 19:34:16 -05:00
359908e927
palm-client: make replay runs the bridge's frame capture through the app's parsers and fails on any frame of a code the app parses that doesn't parse, to catch a firmware layout change before it reaches the Visor. The bridge captures every frame in full with --capture (bridge.sh writes $TMPDIR/visor_frames.txt); captures hold real messages and stay local
rich2026-11-08 19:32:00 -05:00
bb2fc014ab
palm-client: the module can't keep waking a Visor on failing batteries. A slot power handler (SbPwr, in the copied block) stops the chip interrupting on a low-voltage shutdown, as the Springboard guide asks of modules without LOWBAT*; since the Neo's OS never reports that reason, the wake's card event handler and BgArmWake also check the battery and turn the wake off at the OS's warning level. Host-tested; untested on hardware
rich2026-11-08 19:27:39 -05:00
6846d4d79b
docs: Slot restore with an empty slot verified on the Neo; wake and bring-up plan noted
rich2026-11-08 19:22:23 -05:00
db46a0806f
hardware: SB-LoRa bring-up plan (BRINGUP.md): bare-board and bench-power checks, what each SB-LoRa Test line means and what a failure points to (including the A0 mapping and the read values), moving the XIAO stack over, the Slot link, the message wake and standby current
rich2026-11-08 19:19:33 -05:00
e86b14e440
palm-client: a saved Slot link is restored at launch while the OS reports a module (checked without touching the bus), so the closed-app check and its wake use the module; with the slot empty it stays off, as before, so a launch can't reset the Visor
rich2026-11-08 19:18:31 -05:00
f53f851b0e
palm-client: with the Slot link, the radio's 'message waiting' push wakes the Visor. The slot interrupt handler (SbIrq) spots the frame as it drains the FIFO and, as the Springboard guide describes, holds IRQ* (THR empty) to have the system woken, then keeps it awake 10 s for the app to sync. With Check when closed on, the app leaves a copy of the handler in system-owned memory as it closes (SbWakeArm), with the module asleep between frames; it posts a card event whose handler sets the app's alarm for now, so the closed-app check runs at once. check_sections.py checks that the copied block (SbCoreStart..SbCoreEnd) is whole and refers only to itself. The Slot link no longer reconnects after sleep. Host-tested on the simulated module; untested on hardware
rich2026-11-08 19:17:30 -05:00
1354b6531a
docs: Trace result, command retry, empty-slot SB-LoRa Test and Add Contact note verified on the Neo
rich2026-11-08 19:03:57 -05:00
3ca184099c
docs: contact login status verified on the Neo
rich2026-11-08 19:01:04 -05:00
6056339ad8
palm-client: the contact screen's login status is 'Logging in over the mesh...' (it ran off the edge) and its status line is cut rather than running off; Serial Ports' lines too. check_ui.py now measures literals passed to a screen's own one-line helpers, and fails on a new helper that draws its text until its width is listed
rich2026-11-08 19:00:40 -05:00
9ae5decc84
docs: Node clock and Radio Stats layout verified on the Neo
rich2026-11-08 18:57:19 -05:00
5aa68d46ec
docs: AGENTS.md describes check_source.py and the screen line tests
rich2026-11-08 18:53:54 -05:00
19ba4b1cb2
palm-client: the screens' run-time lines are built in screen_fmt.c, and tests/test_screens.c checks them with their longest values in the large font. That found the Node clock lines running off the edge even in the small font (now 'Visor 11/8 14:02 (UTC-5:00)' and 'Radio 11/8 19:02 UTC, sys 300', a font row apart), Radio Stats lines too long for big counts (they wrap now, and the test checks they still fit above Done; errors get their own line, in hex that shows), and the contact summary and a Trace message too wide ('Room server' is 'Room'). Rows that could still be long are cut instead of running off
rich2026-11-08 18:53:49 -05:00
a79349eb76
palm-client: tools/check_source.py runs on every build and fails it on a static const inside a function in an extra code segment (garbage on the Visor), a menu item no code handles, a shortcut letter used twice on a menu bar or taken from the Edit menu, a form with no event handler, and an ID used twice in one form, menu bar or resource type
rich2026-11-08 18:53:49 -05:00
0aaf4d9b42
docs: wrapped messages and the Add Channel note verified on the Neo
rich2026-11-08 18:45:43 -05:00
ff00ac1577
palm-client: tools/check_ui.py runs on every build and fails it when a form object or label goes past its form, an alert's buttons don't fit across it (Palm OS's layout, calibrated on the Stale Contacts alert), or a literal drawn with DrawCut would be cut. It flags the old Contact button row and Stale alert
rich2026-11-08 18:40:31 -05:00
0357b2f838
palm-client: Add Channel's and Add Contact's notes are three lines each (both ran past the right edge), and a Font Preview line fits in the large font
rich2026-11-08 18:40:31 -05:00
eaf792faf3
palm-client: Radio Stats' and SB-LoRa Test's messages wrap onto the next line instead of being cut off at the screen's edge (new DrawWrap)
rich2026-11-08 18:35:53 -05:00
bd9d9ce951
palm-client: SB-LoRa Test (Options menu) for board bring-up: the slot's chip selects, which address mapping reaches the SC16IS740 (connector A0 = CPU A1 or A0, with what each read back), its registers after a reset, a 64-byte internal UART loopback, the slot interrupt (the same loopback through the handler) and a DEVICE_QUERY to the radio. Nothing goes over the air; the bus is only touched once the OS reports a module. Host tests cover the mapping and loopback
rich2026-11-08 18:18:54 -05:00
8fa23f94f9
palm-client: radio commands are sent again when the frame didn't go at all (the USB host re-attaching), up to 4 times, for every command; the transports now tell nothing-sent from part-sent. Commands that are safe to repeat (clock, flood scopes, add contact, reset path) also get a second try when no reply came. Before, most commands tried once and a USB drop took the app offline
rich2026-11-08 18:18:54 -05:00
597c5ac080
palm-client: Map Picker (tools/map_picker.py): pick any area for the Map on a world map in the browser, see each zoom's tiles and the file's estimated size, and build VisorMeshMap.pdb. OpenStreetMap data is fetched per 0.25-degree cell (retrying a busy Overpass server) and cached. Runs on macOS, Windows and Linux with only Python 3; make_map.py is split into reusable steps (its output is unchanged)
rich2026-11-06 12:26:41 -05:00
aaac4db08b
docs: wider street-level map verified on the Neo
rich2026-11-06 12:05:57 -05:00
ce700f1a17
palm-client: the Map's street-level zoom covers about 40 x 31 km (the Main Line to Cherry Hill, Chester to Cheltenham; the map is now 2.0 MB), and outside it the zoom below is shown enlarged instead of blank tiles (Ardmore was blank)
rich2026-11-06 12:02:26 -05:00
f1f2c13ca3
docs: Map layer toggles verified on the Neo
rich2026-11-06 11:56:05 -05:00
c04cfc8dbf
docs: repeater neighbours on the Map verified on the Neo
rich2026-11-06 11:28:28 -05:00
585ef5a6f8
palm-client: the Map gets its own Map menu: Basemap On/Off (M) leaves the nodes on plain white, Neighbour Lines On/Off (L) hides a repeater's neighbour lines. Both are remembered with the view
rich2026-11-06 11:28:28 -05:00
dd72f956d4
docs: multi-hop Trace Path verified on the Neo
rich2026-11-06 11:24:25 -05:00
512b2b7008
docs: repeater ping verified on the Neo
rich2026-11-06 11:23:15 -05:00
3757015668
docs: Remove Stale Contacts verified on the Neo
rich2026-11-06 11:21:33 -05:00
254eb5e96a
palm-client: Remove Stale Contacts' buttons are 2 wk / 1 mo / 3 mo / Cancel, so all four fit (Cancel was off the screen); the message spells the periods out
rich2026-11-06 11:19:48 -05:00
71306a063f
docs: blocking verified on the Neo
rich2026-11-06 11:18:24 -05:00
101b7e2dba
docs: @ mention picker verified on the Neo
rich2026-11-06 11:16:30 -05:00
8f60e81349
docs: Heard Packets verified on the Neo
rich2026-11-06 11:15:54 -05:00
7846307450
docs: contact More list verified on the Neo
rich2026-11-06 11:15:32 -05:00
f033057283
palm-client: the contact screen's buttons get fixed widths, so More no longer runs past the right edge
rich2026-11-06 11:13:49 -05:00
f4379970ee
docs: Radio Stats verified on the Neo
rich2026-11-06 11:08:19 -05:00
08d7b20a16
palm-client: Radio Stats lines fit the screen: battery, storage, noise floor and last heard each get their own line, any line too long is cut, and the noise graph takes the height the lines leave
rich2026-11-06 10:58:53 -05:00
6e6adf780b
palm-client: a contact's More lists what suits its type (Admin Console, Trace / Route, Ping, Reset Path, Block, Beam, Remove); main.c wires the new screens, menus, the beam launch codes and the inbox; Makefile builds the new modules
rich2026-11-05 15:02:22 -05:00
e47a54d189
palm-client: in a conversation, tap a #hashtag to open that channel, or join it after asking (lowercased, as MeshCore One joins them). Typing @ (or Options > Insert Mention) lists recent senders here and then the companions in the contacts, and inserts @[Name]
rich2026-11-05 15:02:22 -05:00
f3be31bd76
palm-client: beam a contact (More > Beam), yourself (Contacts > Beam My Contact) or a channel (Channel > Beam Channel) to another VisorMesh over IR, as the meshcore:// links MeshCore One shares as QR codes. A beam is received in segment 1 without globals and saved to an inbox; the app then asks to add the contact or join the channel (now, later or discard). ChannelJoin, from Add Channel, joins or opens a channel by key
rich2026-11-05 15:02:22 -05:00
7f982b872b
palm-client: Contacts > Remove Stale Contacts: removes from the radio the contacts it hasn't heard an advert from in 2 weeks, a month or 3 months, after saying how many. Kept: ones with messages on the Visor, ones never heard (added by key) and ones we're logged into
rich2026-11-05 15:02:22 -05:00
34c99d8b0a
palm-client: block a sender (a contact's More, or hold their message > Block Sender): their new messages and reactions are dropped as they sync, also in the closed-app check. A contact is blocked by key and by name (channels name senders only by name). Contacts > Blocked Senders lists them to unblock
rich2026-11-05 15:02:22 -05:00
80f2d2781b
palm-client: a repeater's "neighbors" reply in its admin console also goes on the Map for 30 minutes: a line from it to each neighbour with a position, solid for SNR 0 dB or better, grey below. Cmds lists the region commands (region, get, allowf, denyf, save)
rich2026-11-05 15:02:22 -05:00
1fe0d00fae
palm-client: Trace Path (Go menu, or a contact's More > Trace / Route): a trace through the repeaters typed as hop codes or picked with Add, out and back the same way, listing the SNR each hop heard it at and the time it took. For a contact it starts from its route, and Set Route makes the hops its route (ADD_UPDATE_CONTACT from its own record, so nothing else changes). Ping: a trace to a repeater one hop away and back
rich2026-11-05 15:02:22 -05:00
493e2b98f2
palm-client: a DM with no ack is tried again by itself, as MeshCore One does: 4 tries on the contact's route, then the route is reset and one more goes as a flood (which brings a new route); 2 tries for a contact with no route. Only DMs sent this session; after that it stays failed for Retry. Path Details shows the try number
rich2026-11-05 15:01:55 -05:00
7801272830
palm-client: Radio Stats (Go menu, or Stats on Node): the radio's battery, storage, uptime, queue, last signal, airtime and packet counts, read every 5 s, with a graph of its noise floor. Heard Packets (Go menu): the last 40 packets from the RX log, filtered to chat or adverts, a tap showing one in full with its repeaters. info_fmt.c shares the path text with Path Details. The resources also hold the forms and alerts for the features that follow
rich2026-11-05 14:50:04 -05:00
50a5a486db
palm-client: a fifth code segment, and Node, Settings, Font Preview and Add Channel move from vmcode2 (31.1 KB) to vmcode4, leaving vmcode2 room for the hooks the next features need. protocol2.c (vmcode5, host-tested) has the newer companion commands: trace path, stats, battery, a contact's route, plus meshcore:// share links and #hashtags in text
rich2026-11-05 14:43:50 -05:00
ee6e4d7a7b
palm-client: tap and hold a message for React, Reply, Send DM and Path Details (also Options > Message Actions for the newest). Reactions use MeshCore One's format (@[Name]<emoji>\n<hash>, hash = Base32 of SHA-256(text || LE timestamp)), so MC1 and MeshMonitor show ours and we show theirs: kept in their own store, shown under the message, never chat or unread. Received messages keep their hash and, matched from the RX log push, the repeaters they came through. The emoji glyphs now go out as the emoji they show, not cp1252 quotes
rich2026-11-05 09:11:29 -05:00
14fc4ffe0c
docs: progress: connection state in conversations, reconnecting in the background, the USB send block
rich2026-11-05 07:16:09 -05:00
52c4101796
palm-client: over USB, don't send while CTS is off: it's off while nothing on the host reads (bridge stopped), and then SrmSend blocks 10 s whatever the CTS timeout (measured on the Neo: that was the slow reconnect). Reconnect steps skip the send; other sends wait up to 1 s for the host. Drops the CTS-timeout setting, which the USB driver ignores
rich2026-11-05 07:14:07 -05:00
453559cd5c
palm-client: a reconnect in steps is lighter on the app: reads that can't wait check what's buffered first (SrmReceiveCheck), steps 4 times a second instead of 10, its DEVICE_QUERY send waits 100 ms instead of 250
rich2026-11-04 09:45:55 -05:00
b5ce1098b3
palm-client: reconnects after a wake or a lost link run in steps on idle events (open, attach wait, DEVICE_QUERY with the reply checked without waiting), so the app stays usable while it looks for the radio; titles show "connecting"; Options > Connect and a tap on "offline" still connect in one go
rich2026-11-04 09:36:19 -05:00
f9aa7a1e93
palm-client: serial sends wait 250 ms at a time (8 tries, 2 s) instead of the 5 s CTS default, so a connect with nothing reading at the other end (bridge stopped) can't freeze the app for over a minute
rich2026-11-04 09:31:52 -05:00
ce1626410f
palm-client: a command the radio doesn't answer closes the session (offline, not "online" with every command failing), with retries as after a wake; after a quiet minute a time query checks the link is still there
rich2026-11-04 09:24:51 -05:00
d2f992eafc
palm-client: connection state in conversations' title too (the title is cut to make room); tapping "offline" or Options > Connect connects; a reconnect after wake that fails or is stopped is retried 2, 4 ... 256 s later (it often ran before the USB link was back and was never tried again)
rich2026-11-04 08:56:02 -05:00
87a6a7e1a1
docs: progress: the rest of the review, verified on the Neo
rich2026-11-04 08:51:39 -05:00
acf4544f24
palm-client: Options > About VisorMesh: app version, and the radio's firmware when connected
rich2026-11-04 07:39:45 -05:00
f37f0f61c4
palm-client: conversations: an SNR that doesn't fit after a wrapped message goes in its last line's time column instead of a line of its own; "tap for earlier messages" at the top shows 40 more at a time
rich2026-11-04 07:39:45 -05:00
03bd0e7625
palm-client: Contacts shows the route only when known (not "flood" on nearly every row), so names get the room
rich2026-11-04 07:39:45 -05:00
2643a2b40e
palm-client: wrapping doesn't split a @[Name] mention across lines (it stays one chip) unless the mention alone is longer than the line
rich2026-11-04 07:39:45 -05:00
aa3a5da9fe
palm-client: one DbOpen for the three stores (in vmcode4: frees 420 bytes of vmcode2; the channel cache is now backed up too); notes on why session.c stays in segment 1 and on AppLoadPrefs loading every module's prefs
rich2026-11-04 07:36:27 -05:00
14c18b95ee
docs: progress for the interruptible connect
rich2026-11-04 07:35:43 -05:00
003860fa46
docs: progress for incremental contacts, ack expiry and check backoff
rich2026-11-04 07:23:39 -05:00
aedf6eb4c7
palm-client: a connect gives way to the user: a tap or key press stops it (before the radio answers) or skips the refresh steps left (after), instead of locking the app for up to 7 s
rich2026-11-04 07:23:36 -05:00