docs: SB-LoRa rev 2 connector: drop the unconfirmed Amphenol 1C1K candidate and list the parts ruled out (out of production, host-side, or a SIM tray), so J1 has no stocked candidate yet
This commit is contained in:
1 parent
ecd9900ec1
commit
0e37755b66
1 file changed
+1
-1
@@ -68,7 +68,7 @@ A 16550-style UART on csSlot1 replaces rev 1's SC16IS740 SPI bridge and its latc
|
||||
|
||||
## Open
|
||||
|
||||
- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked (Amphenol 1C1K is a candidate. TE 5535657 is the host-side header, so it isn't; the stocked SMT card-side parts found so far, Hirose IC1F-68RD-1.27SF and IC9, are obsolete). The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line.
|
||||
- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked. No stocked candidate yet. Ruled out: TE 5535657 (the host-side header), Hirose IC1F-68RD-1.27SF and IC9 (obsolete), Amphenol 10014744-007T and 71299-050CALF (out of production), and Amphenol 7111S1615A01LF (a SIM card tray). "Amphenol 1C1K" never turned up as a real part number. The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line.
|
||||
- **Case.** The keying is in the module case, so rev 2 needs a case (printed, or a harvested Springboard shell) whose key and latch match the slot, with the board held at the connector's height. Dry-fit a bare harvested connector in the slot to check the contacts seat fully.
|
||||
- **Board thickness.** The straddle connector forces 1.6 mm; a top-mount one may allow 0.8-1.0 mm.
|
||||
- **LiPo size.** The aim is at least a few days per charge. Estimate, to be replaced by a measurement:
|
||||
|
||||
Reference in new issue
Block a user