From 0e37755b669feb48e4f56cee6bfe35901b7e563d Mon Sep 17 00:00:00 2001 From: "Rich O." Date: Thu, 19 Nov 2026 22:10:04 -0500 Subject: [PATCH] docs: SB-LoRa rev 2 connector: drop the unconfirmed Amphenol 1C1K candidate and list the parts ruled out (out of production, host-side, or a SIM tray), so J1 has no stocked candidate yet --- hardware/sb-lora/REV2.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hardware/sb-lora/REV2.md b/hardware/sb-lora/REV2.md index 4355c2a..d137951 100644 --- a/hardware/sb-lora/REV2.md +++ b/hardware/sb-lora/REV2.md @@ -68,7 +68,7 @@ A 16550-style UART on csSlot1 replaces rev 1's SC16IS740 SPI bridge and its latc ## Open -- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked (Amphenol 1C1K is a candidate. TE 5535657 is the host-side header, so it isn't; the stocked SMT card-side parts found so far, Hirose IC1F-68RD-1.27SF and IC9, are obsolete). The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line. +- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked. No stocked candidate yet. Ruled out: TE 5535657 (the host-side header), Hirose IC1F-68RD-1.27SF and IC9 (obsolete), Amphenol 10014744-007T and 71299-050CALF (out of production), and Amphenol 7111S1615A01LF (a SIM card tray). "Amphenol 1C1K" never turned up as a real part number. The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line. - **Case.** The keying is in the module case, so rev 2 needs a case (printed, or a harvested Springboard shell) whose key and latch match the slot, with the board held at the connector's height. Dry-fit a bare harvested connector in the slot to check the contacts seat fully. - **Board thickness.** The straddle connector forces 1.6 mm; a top-mount one may allow 0.8-1.0 mm. - **LiPo size.** The aim is at least a few days per charge. Estimate, to be replaced by a measurement: