docs: progress: rev 2 J1 laid out as a straddle with estimated row position, pad size and thickness; measuring the parts is next

This commit is contained in:
rich committed 2026-11-19 23:01:54 -05:00
1 parent 1d43beeabf
commit 1e32aea88c
1 file changed
+3 -2
+3 -2
View File
@@ -19,7 +19,8 @@
- [x] Plan (hardware/sb-lora/REV2.md): S29AL016J flash on CS0 so the app loads on insertion, SC16C650B UART on CS1 in place of the SC16IS740, XIAO and Wio side by side, LiPo pads
- [x] Netlist, footprints and LCSC numbers; 4-layer layout routed, DRC 0 unconnected, verify.py passes
- [x] Choose J1: Robinson Nugent / 3M MCS-068SMA1-TR30, female straddle receptacle; ordered from eBay 2026-11-19
- [ ] Measure J1 (row gap, tail positions, body), then the straddle J1 pattern in build_board.py and the board thickness
- [x] J1 laid out as a straddle (pins 1-34 on F.Cu, 35-68 on B.Cu opposite, 1.27 mm); rerouted, DRC 0 unconnected, verify.py passes; row position, pad size and thickness estimated
- [ ] Measure J1 (row gap, tail positions, pad size, body), set `J1_ROW`, `J1_PAD` and `BOARD_T` in build_board.py, rebuild
- [ ] Check the XIAO and Wio footprints against the boards at 1:1; check rotations in JLC's preview
- [ ] Order; tag `hw-v0.2`
- [ ] Case with the slot's key and latch
@@ -131,4 +132,4 @@
- 2026-11-09: SB-LoRa rev 2 planned in hardware/sb-lora/REV2.md: a flash on CS0 so the app loads when the module goes in (the installer copies it to RAM, since the transport's interrupt handler can't live on a removable module), a 16550-style UART on CS1 in place of the SC16IS740 SPI bridge, and the XIAO and Wio side by side to make the module flat. Netlist, footprints and LCSC numbers done.
- 2026-11-11: Release workflow: a v* tag builds and tests the app and publishes visormesh-<tag>.prc with SHA256SUMS. The toolchain install is shared with the Dockerfile (tools/install_toolchain.sh).
- 2026-11-17: The Hirose IC1HA order for rev 1's J1 was cancelled. README.md lists the stopgaps for rev 1 (harvested straddle part, donor connector on wires). Rev 2 laid out: 4 layers, routed with Freerouting 1.9.0, DRC 0 unconnected, verify.py passes; J1 left as a placeholder.
- 2026-11-19: Rev 2 J1 chosen: Robinson Nugent / 3M MCS-068SMA1-TR30, a female MEMPAK straddle receptacle at 1.27 mm with the rows directly opposite each other, ordered as eBay surplus. Ruled out as obsolete, host-side or the wrong part: Amphenol 10014744-007T, 71299-050CALF and 7111S1615A01LF (a SIM tray), Hirose IC1F, IC9 and IC1K, TE 5535657, Assmann A-PCMCIA-68 (male THT), and an AliExpress female part (photo and listing brands disagree; $39 shipping). The single-row MCS-068SSA1 would suit a single-sided board but no stock turned up. Next: measure the parts, then the straddle J1 pattern and board thickness.
- 2026-11-19: Rev 2 J1 chosen: Robinson Nugent / 3M MCS-068SMA1-TR30, a female MEMPAK straddle receptacle at 1.27 mm with the rows directly opposite each other, ordered as eBay surplus. Ruled out as obsolete, host-side or the wrong part: Amphenol 10014744-007T, 71299-050CALF and 7111S1615A01LF (a SIM tray), Hirose IC1F, IC9 and IC1K, TE 5535657, Assmann A-PCMCIA-68 (male THT), and an AliExpress female part (photo and listing brands disagree; $39 shipping). The single-row MCS-068SSA1 would suit a single-sided board but no stock turned up. J1 laid out as a straddle the same day (rev 1's top/bottom split, rows directly opposite) and the board rerouted: DRC 0 unconnected, verify.py passes and now checks the straddle; renders regenerated. The row's distance from the edge, the pad size and the 1.6 mm thickness are estimates. Next: measure the parts and set `J1_ROW`, `J1_PAD` and `BOARD_T`.