hardware: SB-LoRa rev 2 J1 as a straddle for the MCS-068SMA1: pins 1-34 on F.Cu, 35-68 on B.Cu directly opposite at 1.27 mm (rev 1's split); row position, pad size and board thickness are estimates until a part is measured. Rerouted: DRC 0 unconnected, verify.py checks the straddle and passes; renders regenerated
This commit is contained in:
1 parent
f5653d9d2c
commit
1d43beeabf
8 files changed
+12683
-12773
No files matched your search
@@ -79,22 +79,22 @@ A 16550-style UART on csSlot1 replaces rev 1's SC16IS740 SPI bridge and its latc
|
||||
|
||||
## Netlist and layout
|
||||
|
||||
`rev2/netlist.py` has the parts and connections, in the same shape as rev 1's `source/netlist.py` (rev 1 stays as built under `hw-v0.1`). The board is laid out and routed. **Don't order it until J1 is settled** (below).
|
||||
`rev2/netlist.py` has the parts and connections, in the same shape as rev 1's `source/netlist.py` (rev 1 stays as built under `hw-v0.1`). The board is laid out and routed with J1 as a straddle. **Don't order it until J1's pattern is measured** (below).
|
||||
|
||||
- **Board:** 50.43 x 75.05 mm, the same outline as rev 1. 4 layers, 1.6 mm: In1.Cu is a solid GND plane, F.Cu, In2.Cu and B.Cu carry signals, with GND pours on In2 and B. Every part is on the top except the LiPo pads (BT1), which are on the bottom under the radio boards. Tracks are 0.15 mm with 0.15 mm gaps, and vias are 0.5/0.25 mm, all within JLCPCB's standard 4-layer rules.
|
||||
- **Board:** 50.43 x 75.05 mm, the same outline as rev 1. 4 layers, 1.6 mm: In1.Cu is a solid GND plane, F.Cu, In2.Cu and B.Cu carry signals, with GND pours on In2 and B. Every part is on the top except the LiPo pads (BT1), which are on the bottom under the radio boards, and J1's pins 35-68, which are on the bottom edge opposite pins 1-34. Tracks are 0.15 mm with 0.15 mm gaps, and vias are 0.5/0.25 mm, all within JLCPCB's standard 4-layer rules.
|
||||
- **Build:** `rev2/make.sh` runs the whole pipeline: `set_project.py`, then `build_board.py` (placement and GND vias), then Freerouting 1.9.0, then `finish_board.py` (pours), DRC and `verify.py`. It needs KiCad 10 (the Homebrew cask), Java 21 (`openjdk@21`) and `FREEROUTING=/path/to/freerouting-1.9.0.jar`; Freerouting 2.x ignores the pass limit and never finishes. `rev2/make_fab.py fab` writes the JLCPCB gerbers zip, BOM, CPL and the hand-fit list.
|
||||
- **Checks:** DRC reports 0 unconnected pads and no clearance errors. What's left is the XIAO footprint's outline silk being clipped at its pads, and warnings about the missing footprint-library table. `verify.py` checks every pad's net against the netlist, J1 against Table 5-1, the flash's word mode, the UART strobes and register select, the inverters, and that only U5 and U6 cross the two power domains.
|
||||
- **Renders:** `rev2/renders/`, below. They still show the placeholder J1 (two staggered rows on the top); they'll be regenerated after the straddle J1 rework.
|
||||
- **Checks:** DRC reports 0 unconnected pads and no clearance errors. What's left is the XIAO footprint's outline silk being clipped at its pads, and warnings about the missing footprint-library table. `verify.py` checks every pad's net against the netlist, J1 against Table 5-1, J1's straddle (pins 1-34 on F.Cu, 35-68 on B.Cu, each directly opposite its partner), the flash's word mode, the UART strobes and register select, the inverters, and that only U5 and U6 cross the two power domains.
|
||||
- **Renders:** `rev2/renders/`, below, made with `kicad-cli pcb render --side top|bottom -w 784 -h 1096 --background opaque`. J1's pads are the estimated straddle pattern.
|
||||
|
||||
| Top | Bottom |
|
||||
|---|---|
|
||||
|  |  |
|
||||
|
||||
Before ordering:
|
||||
1. **J1.** When the MCS-068SMA1 parts arrive (ordered 2026-11-19), measure one with calipers. The straddle needs a new pattern in `build_board.py`: one row of pads on F.Cu and one on B.Cu, directly opposite each other, in place of the current two staggered rows on top. Set the `J1_*` constants from the sample: pitch, each row's distance from the edge, and pad size. Keep the 5.5 mm strip along the edge free (`J1_KEEP`) on both sides, and check whether the connector body needs the board edge moved. Then run `make.sh` and `make_fab.py` again. The current pattern is a placeholder: two staggered rows of 0.5 x 1.6 mm pads on the top, 1.3 and 3.5 mm in from the edge.
|
||||
1. **J1.** The straddle pattern is in `build_board.py`: pins 1-34 on F.Cu and 35-68 on B.Cu directly opposite, at 1.27 mm (the same split as rev 1). The rest is estimated: 0.6 x 1.6 mm pads centred 1.3 mm from the edge. When the MCS-068SMA1 parts arrive (ordered 2026-11-19), measure one with calipers and set `J1_ROW`, `J1_PAD` and `BOARD_T` from it. Keep the 5.5 mm strip along the edge free (`J1_KEEP`) on both sides, and check whether the connector body needs the board edge moved. Then run `make.sh` and `make_fab.py` again, and regenerate the renders.
|
||||
2. **XIAO and Wio footprints.** Check them against the real boards with calipers (print the top copper at 1:1).
|
||||
3. **Assembly.** In JLC's placement preview, check the rotation of U1 (pin 1 at the top left, beside the triangle), U2, U3, U5 and Y1.
|
||||
4. **Board thickness.** Match it to the 3M part's gap between the rows. If that's thinner than 1.6 mm, change `SetBoardThickness` in `build_board.py` and the thickness in the JLC order to suit.
|
||||
4. **Board thickness.** Match it to the 3M part's gap between the rows. If that's thinner than 1.6 mm, change `BOARD_T` in `build_board.py` and the thickness in the JLC order to suit.
|
||||
5. Tag the commit you order from as `hw-v0.2`.
|
||||
|
||||
## Carried over from rev 1
|
||||
|
||||
@@ -5,9 +5,11 @@ Same frame as rev 1 (../source/build_board.py): springSD's in-slot outline, conn
|
||||
bottom, the extension for the radio boards at the top. 4 layers: F.Cu, In2.Cu and B.Cu carry
|
||||
signals; In1.Cu is a solid GND plane.
|
||||
|
||||
J1 is a placeholder. No single-sided card-side receptacle has been chosen, so its land pattern
|
||||
comes from the J1_* constants below. Replace them from the part's drawing before ordering, and
|
||||
keep the J1 zone (J1_KEEP from the edge) free of other parts so the real pattern fits.
|
||||
J1 is a Robinson Nugent / 3M MCS-068SMA1-TR30 straddle receptacle: pins 1-34 on F.Cu, 35-68 on
|
||||
B.Cu directly opposite, 1.27 mm pitch. There's no drawing, so the row's distance from the edge,
|
||||
the pad size and the board thickness are estimates in the J1_* constants below. Set them from a
|
||||
measured part before ordering, and keep the J1 zone (J1_KEEP from the edge, both sides) free of
|
||||
other parts so the real pattern fits.
|
||||
"""
|
||||
import sys, os
|
||||
import pcbnew
|
||||
@@ -29,19 +31,18 @@ LOCAL = os.path.join(HERE, "visormesh.pretty")
|
||||
OUT = sys.argv[1] if len(sys.argv) > 1 else os.path.join(HERE, "visormesh.kicad_pcb")
|
||||
REV = "v0.2"
|
||||
|
||||
# ---- J1 placeholder land pattern (replace from the chosen part's drawing) ----
|
||||
J1_PITCH = 1.27 # contact pitch within a row (PC Card standard)
|
||||
J1_STAGGER = 0.635 # row B tails offset from row A along the edge
|
||||
J1_ROW_A = 1.3 # pins 1-34: pad centre distance from the board edge
|
||||
J1_ROW_B = 3.5 # pins 35-68
|
||||
J1_PAD = (0.5, 1.6) # pad width along the edge, length into the board
|
||||
J1_KEEP = 5.5 # no other parts within this distance of the edge
|
||||
# ---- J1 straddle land pattern: pitch from the catalogue, the rest estimated until a part is measured ----
|
||||
J1_PITCH = 1.27 # contact pitch within a row (catalogue: .050")
|
||||
J1_ROW = 1.3 # pad centre distance from the board edge, both rows (estimate)
|
||||
J1_PAD = (0.6, 1.6) # pad width along the edge, length into the board (estimate)
|
||||
J1_KEEP = 5.5 # no other parts within this distance of the edge, top or bottom
|
||||
BOARD_T = 1.6 # set by the connector's gap between the rows (not yet measured)
|
||||
|
||||
board = pcbnew.BOARD()
|
||||
board.SetCopperLayerCount(4)
|
||||
board.SetLayerType(pcbnew.In1_Cu, pcbnew.LT_POWER)
|
||||
ds = board.GetDesignSettings()
|
||||
ds.SetBoardThickness(MM(1.6))
|
||||
ds.SetBoardThickness(MM(BOARD_T))
|
||||
ds.m_TrackMinWidth = MM(0.15)
|
||||
ds.m_MinClearance = MM(0.15)
|
||||
ds.m_ViasMinSize = MM(0.45)
|
||||
@@ -66,10 +67,11 @@ for lyr in (pcbnew.F_Fab, pcbnew.B_Fab, pcbnew.F_SilkS):
|
||||
s = pcbnew.PCB_SHAPE(board); s.SetShape(pcbnew.SHAPE_T_SEGMENT)
|
||||
s.SetStart(V(X0 + 1, Y_SLOT)); s.SetEnd(V(X1 - 1, Y_SLOT)); s.SetLayer(lyr); s.SetWidth(MM(0.12))
|
||||
board.Add(s)
|
||||
# J1 zone on the fab layer, so the placeholder's extent shows on the assembly drawing
|
||||
s = pcbnew.PCB_SHAPE(board); s.SetShape(pcbnew.SHAPE_T_RECT)
|
||||
s.SetStart(V(X0 + 0.5, Y_EDGE - J1_KEEP)); s.SetEnd(V(X1 - 0.5, Y_EDGE - 0.2))
|
||||
s.SetLayer(pcbnew.F_Fab); s.SetWidth(MM(0.1)); board.Add(s)
|
||||
# J1 zone on both fab layers, so the connector's extent shows on the assembly drawings
|
||||
for lyr in (pcbnew.F_Fab, pcbnew.B_Fab):
|
||||
s = pcbnew.PCB_SHAPE(board); s.SetShape(pcbnew.SHAPE_T_RECT)
|
||||
s.SetStart(V(X0 + 0.5, Y_EDGE - J1_KEEP)); s.SetEnd(V(X1 - 0.5, Y_EDGE - 0.2))
|
||||
s.SetLayer(lyr); s.SetWidth(MM(0.1)); board.Add(s)
|
||||
|
||||
# ---------------- nets ----------------
|
||||
netinfo = {}
|
||||
@@ -78,17 +80,19 @@ for n in NETS:
|
||||
|
||||
def springboard_fp():
|
||||
fp = pcbnew.FOOTPRINT(board)
|
||||
fp.SetFPID(pcbnew.LIB_ID("visormesh", "SPRINGBOARD_68_SMT"))
|
||||
fp.SetReference("J1"); fp.SetValue("Springboard 68p SMT (placeholder)")
|
||||
fp.SetFPID(pcbnew.LIB_ID("visormesh", "SPRINGBOARD_68_STRADDLE"))
|
||||
fp.SetReference("J1"); fp.SetValue("MCS-068SMA1 straddle (pattern estimated)")
|
||||
for n in range(1, 69):
|
||||
a = n <= 34
|
||||
k = (n - 1) if a else (n - 35)
|
||||
x = 0.8 * IN - k * J1_PITCH - (0 if a else J1_STAGGER)
|
||||
y = -(J1_ROW_A if a else J1_ROW_B)
|
||||
top = n <= 34 # same split as rev 1: pin n on F.Cu, pin n + 34 opposite it on B.Cu
|
||||
k = (n - 1) if top else (n - 35)
|
||||
x = 0.8 * IN - k * J1_PITCH
|
||||
y = -J1_ROW
|
||||
p = pcbnew.PAD(fp)
|
||||
p.SetNumber(str(n)); p.SetShape(pcbnew.PAD_SHAPE_RECT); p.SetAttribute(pcbnew.PAD_ATTRIB_SMD)
|
||||
p.SetSize(V(*J1_PAD))
|
||||
ls = pcbnew.LSET(); ls.AddLayer(pcbnew.F_Cu); ls.AddLayer(pcbnew.F_Mask); ls.AddLayer(pcbnew.F_Paste)
|
||||
ls = pcbnew.LSET()
|
||||
for l in ((pcbnew.F_Cu, pcbnew.F_Mask, pcbnew.F_Paste) if top else (pcbnew.B_Cu, pcbnew.B_Mask, pcbnew.B_Paste)):
|
||||
ls.AddLayer(l)
|
||||
p.SetLayerSet(ls)
|
||||
fp.Add(p)
|
||||
p.SetPosition(V(OX + x, Y_EDGE + y))
|
||||
@@ -213,7 +217,7 @@ for ref, fp in placed.items():
|
||||
n = p.GetNumber()
|
||||
if ref == "J1":
|
||||
row_a = int(n) <= 34
|
||||
dx = (1 if int(n) == 1 else -1) if row_a else 0 # row A ends go sideways, row B inward
|
||||
dx = (1 if int(n) == 1 else -1) if row_a else 0 # top row's ends go sideways, bottom row inward
|
||||
fanout(p, dx, 0 if row_a else -1)
|
||||
continue
|
||||
if ref in ("U2", "BT1"):
|
||||
@@ -261,7 +265,7 @@ ka.SetLayerSet(ls)
|
||||
ka.SetDoNotAllowTracks(True); ka.SetDoNotAllowVias(True); ka.SetDoNotAllowPads(False)
|
||||
ka.SetDoNotAllowFootprints(False); ka.SetDoNotAllowZoneFills(False)
|
||||
ol = ka.Outline(); ol.NewOutline()
|
||||
ky = Y_EDGE - J1_ROW_A + J1_PAD[1] / 2 - 0.1 # just inside row A's pad tips
|
||||
ky = Y_EDGE - J1_ROW + J1_PAD[1] / 2 - 0.1 # just inside the pad tips
|
||||
for x, y in ((X0, ky), (X1, ky), (X1, Y_EDGE), (X0, Y_EDGE)):
|
||||
ol.Append(MM(x), MM(y))
|
||||
board.Add(ka)
|
||||
@@ -280,6 +284,8 @@ silk("^ SLOT OPENING ^", 84.0, Y_SLOT + 1.3, 0.8)
|
||||
silk("USB-C this edge", 87.0, Y_TOP + 1.0, 0.8, pcbnew.B_SilkS, True)
|
||||
silk("1", OX + 0.8 * IN, Y_EDGE - J1_KEEP - 0.8, 0.8)
|
||||
silk("34", OX - 0.85 * IN, Y_EDGE - J1_KEEP - 0.8, 0.8)
|
||||
silk("35", OX + 0.8 * IN, Y_EDGE - J1_KEEP - 0.8, 0.8, pcbnew.B_SilkS, True)
|
||||
silk("68", OX - 0.85 * IN, Y_EDGE - J1_KEEP - 0.8, 0.8, pcbnew.B_SilkS, True)
|
||||
silk("LiPo", 100.25, YX + 4.3, 0.8, pcbnew.B_SilkS, True)
|
||||
for i, lab in enumerate(("IO", "CK", "RS", "G")): # SWDIO, SWCLK, NRST, GND
|
||||
silk(lab, 102.5, Y_TOP + 2.5 + 2.8 * i, 0.8)
|
||||
|
||||
@@ -1,53 +1,26 @@
|
||||
** Drc report for visormesh.kicad_pcb **
|
||||
** Created on 2026-11-17T20:34:25 **
|
||||
** Created on 2026-11-19T22:57:51 **
|
||||
** Report includes: Errors, Warnings **
|
||||
|
||||
** Found 54 DRC violations **
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 53.7682 mm): Footprint TP2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_TO_SOT_SMD'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 78.5000 mm): Footprint U6
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(114.5000 mm, 89.0000 mm): Footprint C4
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(113.5000 mm, 104.5000 mm): Footprint C2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
Local override; warning
|
||||
@(112.5000 mm, 59.4682 mm): Footprint X2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(95.0000 mm, 81.5000 mm): Footprint C8
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Jumper'
|
||||
Local override; warning
|
||||
@(116.5000 mm, 78.5000 mm): Footprint JP1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Diode_SMD'
|
||||
Local override; warning
|
||||
@(112.0000 mm, 78.5000 mm): Footprint D1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(87.0000 mm, 98.0000 mm): Footprint C7
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
Local override; warning
|
||||
@(114.5000 mm, 92.5000 mm): Footprint U3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Crystal'
|
||||
Local override; warning
|
||||
@(83.0000 mm, 98.0000 mm): Footprint Y1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(83.0000 mm, 84.0000 mm): Footprint C3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Jumper'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 95.5000 mm): Footprint JP2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
Local override; warning
|
||||
@(95.0000 mm, 78.5000 mm): Footprint U5
|
||||
@(101.0000 mm, 81.5000 mm): Footprint C10
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(79.0000 mm, 98.0000 mm): Footprint C6
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(87.0000 mm, 59.4682 mm): Footprint X1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(105.5000 mm, 95.5000 mm): Footprint R4
|
||||
@(100.2500 mm, 56.5682 mm): Footprint TP3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 75.5000 mm): Footprint C11
|
||||
@@ -56,55 +29,86 @@
|
||||
@(93.0000 mm, 89.0000 mm): Footprint C5
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(105.0000 mm, 78.5000 mm): Footprint R2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
@(88.0000 mm, 78.5000 mm): Footprint R3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Diode_SMD'
|
||||
Local override; warning
|
||||
@(92.0000 mm, 114.0000 mm): Footprint C1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_TO_SOT_SMD'
|
||||
@(112.0000 mm, 78.5000 mm): Footprint D1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
Local override; warning
|
||||
@(93.0000 mm, 92.5000 mm): Footprint U4
|
||||
@(114.5000 mm, 92.5000 mm): Footprint U3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Jumper'
|
||||
Local override; warning
|
||||
@(116.5000 mm, 78.5000 mm): Footprint JP1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
Local override; warning
|
||||
@(0.0000 mm, 0.0000 mm): Footprint J1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 50.9682 mm): Footprint TP1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Jumper'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 81.5000 mm): Footprint C10
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 56.5682 mm): Footprint TP3
|
||||
@(101.0000 mm, 95.5000 mm): Footprint JP2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_DFN_QFN'
|
||||
Local override; warning
|
||||
@(83.0000 mm, 89.0000 mm): Footprint U2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 104.5000 mm): Footprint U1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(88.0000 mm, 78.5000 mm): Footprint R3
|
||||
@(113.5000 mm, 104.5000 mm): Footprint C2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(95.0000 mm, 75.5000 mm): Footprint C9
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
Local override; warning
|
||||
@(0.0000 mm, 0.0000 mm): Footprint J1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
@(112.5000 mm, 59.4682 mm): Footprint X2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
Local override; warning
|
||||
@(90.5000 mm, 78.5000 mm): Footprint R1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 59.3682 mm): Footprint TP4
|
||||
@(87.0000 mm, 59.4682 mm): Footprint X1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_TO_SOT_SMD'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 78.5000 mm): Footprint U6
|
||||
@(93.0000 mm, 92.5000 mm): Footprint U4
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
Local override; warning
|
||||
@(95.0000 mm, 78.5000 mm): Footprint U5
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(95.0000 mm, 81.5000 mm): Footprint C8
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(87.0000 mm, 98.0000 mm): Footprint C7
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Crystal'
|
||||
Local override; warning
|
||||
@(83.0000 mm, 98.0000 mm): Footprint Y1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 66.9682 mm): Footprint C12
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'TestPoint'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 53.7682 mm): Footprint TP2
|
||||
@(100.2500 mm, 59.3682 mm): Footprint TP4
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(83.0000 mm, 84.0000 mm): Footprint C3
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Capacitor_SMD'
|
||||
Local override; warning
|
||||
@(92.0000 mm, 114.0000 mm): Footprint C1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(105.5000 mm, 95.5000 mm): Footprint R4
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Package_SO'
|
||||
Local override; warning
|
||||
@(101.0000 mm, 104.5000 mm): Footprint U1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(105.0000 mm, 78.5000 mm): Footprint R2
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'Resistor_SMD'
|
||||
Local override; warning
|
||||
@(90.5000 mm, 78.5000 mm): Footprint R1
|
||||
[lib_footprint_issues]: The current configuration does not include the footprint library 'visormesh'
|
||||
Local override; warning
|
||||
@(100.2500 mm, 59.9682 mm): Footprint BT1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(87.0000 mm, 50.1182 mm): Footprint text of X1 (USB)
|
||||
@(85.7300 mm, 50.8992 mm): PTH pad SWDIO [SWDIO] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(80.6000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@@ -141,6 +145,14 @@
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 64.5482 mm): PTH pad 9 [LORA_SCK] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 51.8482 mm): PTH pad 14 [XIAO_VBUS] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 54.3882 mm): PTH pad 13 [GND] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@@ -153,18 +165,6 @@
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 56.9282 mm): PTH pad 12 [3V3X] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 54.3882 mm): PTH pad 13 [GND] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(93.4000 mm, 48.9182 mm): Segment of X1 on F.Silkscreen
|
||||
@(95.0800 mm, 51.8482 mm): PTH pad 14 [XIAO_VBUS] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(87.0000 mm, 50.1182 mm): Footprint text of X1 (USB)
|
||||
@(85.7300 mm, 50.8992 mm): PTH pad SWDIO [SWDIO] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(87.0000 mm, 50.1182 mm): Footprint text of X1 (USB)
|
||||
@@ -172,11 +172,11 @@
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(80.1550 mm, 57.2492 mm): Footprint text of X1 (BAT-)
|
||||
@(82.5550 mm, 57.2492 mm): PTH pad BAT- [GND] of X1
|
||||
@(78.9200 mm, 56.9282 mm): PTH pad 3 [LORA_RESET] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(80.1550 mm, 57.2492 mm): Footprint text of X1 (BAT-)
|
||||
@(78.9200 mm, 56.9282 mm): PTH pad 3 [LORA_RESET] of X1
|
||||
@(82.5550 mm, 57.2492 mm): PTH pad BAT- [GND] of X1
|
||||
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||
Local override; warning
|
||||
@(80.1550 mm, 59.1542 mm): Footprint text of X1 (BAT+)
|
||||
|
||||
+12563
-12666
File diff suppressed because it is too large.
Load diff
@@ -1,5 +1,5 @@
|
||||
"""
|
||||
VisorMesh Springboard module, rev 2: parts and connectivity. Laid out (build_board.py), not built; J1 is a placeholder.
|
||||
VisorMesh Springboard module, rev 2: parts and connectivity. Laid out (build_board.py), not built; J1's land pattern is estimated until a part is measured.
|
||||
Same shape as ../source/netlist.py (rev 1, hw-v0.1), so its board and schematic scripts can be adapted.
|
||||
See ../REV2.md for the reasons behind each choice.
|
||||
|
||||
@@ -24,8 +24,8 @@ Pin tables that still need checking against a datasheet are marked VERIFY.
|
||||
# ref: (value, footprint_lib, footprint_name, lcsc, description, dnp)
|
||||
# An empty LCSC number is still to be looked up.
|
||||
PARTS = {
|
||||
"J1": ("Springboard 68p SMT", None, "SPRINGBOARD_68_SMT", "",
|
||||
"Single-sided SMT PC Card receptacle, card side; part not chosen, land pattern is a placeholder (REV2.md). Hand-solder", True),
|
||||
"J1": ("MCS-068SMA1-TR30", None, "SPRINGBOARD_68_STRADDLE", "",
|
||||
"Robinson Nugent / 3M PC Card receptacle, card side, straddle mount; land pattern estimated until a part is measured (REV2.md). Hand-solder", True),
|
||||
"U1": ("S29AL016J70TFI020", "Package_SO", "TSOP-I-48_18.4x12mm_P0.5mm", "C914935",
|
||||
"2 MB NOR flash, x16, 70 ns, csSlot0", False),
|
||||
"U2": ("SC16C650BIBS", "Package_DFN_QFN", "HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm", "C729132",
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 51 KiB After Width: | Height: | Size: 51 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 75 KiB After Width: | Height: | Size: 71 KiB |
@@ -33,6 +33,13 @@ def want(name):
|
||||
return ""
|
||||
jbad = [(p, SB_NAMES[p], pad_net[("J1", str(p))]) for p in range(1, 69) if pad_net[("J1", str(p))] != want(SB_NAMES[p])]
|
||||
check(not jbad, f"J1 pins 1-68 agree with Table 5-1 {jbad[:4]}")
|
||||
j1 = {p.GetNumber(): p for fp in b.GetFootprints() if fp.GetReference() == "J1" for p in fp.Pads()}
|
||||
def side(p):
|
||||
return {(True, False): "F", (False, True): "B"}.get((p.IsOnLayer(pcbnew.F_Cu), p.IsOnLayer(pcbnew.B_Cu)), "?")
|
||||
sbad = [n for n in range(1, 69) if side(j1[str(n)]) != ("F" if n <= 34 else "B")]
|
||||
check(not sbad, f"J1 straddle: pins 1-34 on F.Cu only, 35-68 on B.Cu only {sbad[:4]}")
|
||||
obad = [n for n in range(1, 35) if j1[str(n)].GetPosition() != j1[str(n + 34)].GetPosition()]
|
||||
check(not obad, f"J1 straddle: pin n + 34 directly opposite pin n {obad[:4]}")
|
||||
|
||||
# 3. flash in word mode on the slot bus: flash A0 = slot A1, all 16 data lines, CS0*
|
||||
check(pad_net[("U1", "25")] == "A1" and pad_net[("U1", "9")] == "A20" and pad_net[("U1", "26")] == "CS0_N"
|
||||
|
||||
Reference in new issue
Block a user