A "Three ways to break it" chapter before Phase 1: the bare glass screen that
cracks when the mainboard flexes (do the Pico swap with the board out of the
case, on a padded surface, and tape the panel's edges with Kapton), the brass
screw posts that snap out of the shell when a screw is forced, and the charge
control that powering the core board's own USB-C bypasses (forum members
measured cells at 4.46 V and 4.74 V after powering the Pico's port). Steps 1
and 2 and the day-to-day section now follow it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
docs/picocalc.md starts from a stock PicoCalc with its Pico and ends with a
Linux handheld running MeshTerm with a LoRa radio soldered inside: a priced
shopping list, the Lyra swap, writing Calculinux, the serial console, Wi-Fi,
the setup script phase by phase, then PlatformIO, the firmware build with the
patch explained hunk by hunk and a by-hand route for when it stops applying,
flashing, the four wires, the Lyra setup, day-to-day use and troubleshooting.
The README gains a Documentation table and points the handheld paragraph at
the two manuals; the script indexes and the changelog follow. hardware.md
stays as the reference behind both.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
docs/uconsole.md walks a uConsole with the AIO LoRa board from requirements
to a running bridge and a connected MeshTerm: the system prep, the radio
runtime (and the bookworm/trixie split), the preflight, a foreground run,
the user service, the profile, updating, troubleshooting, and what has been
tested. Plain language, one step at a time; docs/hardware.md stays as the
reference behind it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Support page's text and QR code and the repository's funding file all pointed at a
tinyurl redirect, which a reader could not audit; they now carry the hosted-button address
itself. The page still renders on both platforms.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Two real contact names pulled the purge preview's reason lanes out of line, and the
Contacts list and chat picker would do the same, since all three pad names through one
measurement.
"Tech-Info 👨🏻💻" carries a skin tone. Rich measures the modifier zero, as the
terminal draws it; wcwidth gives it two, so prompt_toolkit reserved four cells for a
two-cell glyph. The cache now measures a modifier zero at either calibration, which lets
prompt_toolkit fold it into the cell before it the way it folds a variation selector,
and the cluster merge carries it inside a joined run.
"That's So Fetch 🏴" is a pirate flag cut at the name's byte limit, just past its
joiner. Both authorities folded whatever followed a joiner into the glyph, and here
that is the lane's padding space, so the name measured a cell short. A joiner now joins
only a pictograph. On the width-2 path Rich's own loop is wrapped for this one case; its
table is still left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The target ladder described every rung in a phrase, "keeps 45 · archives 12", so
comparing two rungs meant finding the numbers inside two sentences. The counts are
columns now, right-aligned under a pinned TARGET / KEEPS / ARCHIVES header like the
editors' lane header, one rung lane measured across both sections so the numbers run
straight down the whole ladder. Keeps still leads. A rung that archives nothing shows
a muted 0.
The preview joined its reasons with " · ", so the second and third began wherever the
first happened to end. They sit in three lanes measured against the victim list, and
remeasured when a spared row leaves, under the one WHY IT RANKS LOW header: a lane holds
a contact's n-th weakest reason, whose kind varies from row to row, so a word per lane
would claim a kind the column does not keep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rich draws a panel's corners rounded, and square only where it judges the console
legacy Windows, which a captured pytest run on Windows is. The credit tests looked for
the square corner, so they passed here and failed on every Linux and macOS runner.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Dashboard, map, trace and the Message paths dialog two by two, each with an alt text that
says what it shows, and the PicoCalc photo alone beneath them, downscaled to 1200 px wide so
the README does not load a 7 MB camera frame. The placeholder comment is gone with its job.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
github-release.yml gains a website job: once the release is published it rebuilds the meshterm.net site from the tagged tree and pushes it back with a deploy key scoped to that one repository. The release skill says what to do when only that job fails.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The macOS installers of 0.3.3 never built: the notices step refused pyobjc-core and
pyobjc-framework-libdispatch, whose wheels ship no licence text. Their MIT text is vendored
now, and a test checks every vendored path on every platform.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The three rules the licensing pass settled, pinned where the other binding standards live so
a new file, a new map surface or a new NOTICE paragraph is held to them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The five installers bundled Cascadia's font licence and nothing else --
not MeshTerm's own LICENSE and NOTICE, not the MIT/BSD/PSF notices
Apache-2.0 and those licences all want kept with a redistributed copy.
packaging/notices.py walks the mesh-term distribution's actual runtime
dependency closure through importlib.metadata (markers evaluated for
this platform, the dev extra excluded), gathers each package's licence
text, and fails the build loudly if one is missing rather than shipping
a silent gap -- which is exactly what it found: pyserial and the nine
winrt-* packages bleak's Windows backend pulls in all declare a licence
but ship no licence file in their wheel at all. Their real text, pulled
from each project's own repository, is vendored under
packaging/vendored-licenses/ for those two documented, verified gaps;
anything else missing still stops the build.
The spec generates THIRD-PARTY-NOTICES.txt fresh into the build
directory on every run and bundles it at the archive root alongside
LICENSE and NOTICE. installers.yml uploads the same three files once,
from the linux-x64 leg, so they land beside the downloads on the
release page too, without extracting an installer just to read them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A silent skip would let an unmarked file through, which is the one thing the test exists to
catch. The two new changelog lines now read in the file's own voice, and a docstring in the
logging tests is wrapped under the line limit.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The relicensing grant binds by conduct only if the contributor had a fair chance to see it, and the template mentioned CONTRIBUTING only inside an HTML comment the rendered PR never shows. One visible checkbox at the top of the checklist.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Apache-2.0 does not require per-file headers, but a file lifted out of the tree carried no marking at all. One comment line, first (or right after a shebang), on every .py under meshterm/, tests/, packaging/ and scripts/, plus the extensionless SPI bridge; tests/test_spdx.py keeps a new file from landing without one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The GPL-2.0-only 6x8 script executes the generator block out of the Apache-2.0 6x12 script, and GPLv2 and Apache-2.0 do not mix inside one program. Both files are the author's, so the block between the BEGIN/END markers is additionally available under GPL-2.0-only for that use; both headers and the hardware manual say so. No code changes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
meshcore-uart1.patch quotes upstream lines and build-firmware.sh produces a MeshCore binary, so the licence those copies travel under now sits beside them as scripts/xiao-radio/LICENSE.MeshCore, verbatim from upstream, and is named from the bench card and the hardware manual.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
preferences.yaml becomes preferences.toml: config.toml and the device-config
backups were already TOML, and tomli/tomli-w already dependencies, so PyYAML
existed for this one file and is dropped. The file keeps its shape - flat
keys, only the overrides, grouped under comment headings with each entry's
help and default - and one name, PREFERENCES_FILENAME, for both call sites.
TOML refuses a whole document over one bad line, so a refused file is read
again a line at a time: a valid line keeps its typed value, a refused one
hands its right-hand side to parse_value as text. One broken hand edit still
costs only its line, and a word left unquoted (log_level = DEBUG) still reads.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
pymc_core was renamed openhop_core in 2026 and the current meshcore-uconsole
package depends on the new name, so a bridge that only knew the old one failed
its own preflight on a fresh install. It now finds either runtime, newest first
(an interpreter with openhop_core beats an earlier candidate with pymc_core;
MESHTERM_PYMC_PYTHON still overrides), imports through the name it found, and
lets two of its three compat shims stand down under openhop_core, which accepts
long ACK payloads and pushes completed trace replies itself; pushing a trace
twice was the alternative. The raw RX-log push is still the bridge's.
What the port found on the device shaped the rest. The 1.12.0 .deb is built for
trixie against Python 3.13 and cannot run on a bookworm uConsole, so the bridge
looks first in a venv of its own (~/.local/share/meshterm-spi-bridge/venv, made
with openhop-core[hardware]) and, without the GUI's helpers there, configures
the radio itself with the uConsole AIO preset rather than the runtime's
Waveshare defaults (TX-enable on pin 6, no DIO2 switch, no TCXO -- deaf on the
AIO), every MESHCORE_* knob the GUI reads honoured and passed only where the
constructor accepts it. It also loads the GUI's identity key first, so a bridge
in its own venv is still the same node. Verified on the uConsole: openhop-core
1.1.3, radio up, 159 contacts restored, info and contacts answered over TCP,
and the boot service now runs from that venv. The manual and the index say all
of this instead of the rename warning.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
--mock promises a session with no real hardware, and a scan was the one thing
the devices tool did regardless: it walked the serial ports and switched the
Bluetooth radio on, which broke the promise on the first command a stranger
without a radio would try, and which the test sweep had to work around with
--no-ble. Now the simulator is the inventory under --mock: one row with the
flag itself as its target, since that is how this device is selected, and a
stable id of its own. The sweep's workaround is gone and a contract test
replaces both discovery entry points with ones that fail if reached.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A leading underscore says "internal to this file, don't import me", and the
column-age formatter and the node glyph table wore one while seventeen modules
imported them and CLAUDE.md named them as the one place each concept lives.
format_age sits beside format_ago now (prose age, column age), NODE_GLYPHS and
DEFAULT_GLYPH beside them, age_seconds with the ages. A mechanical rename, 140
references across 24 files, CLAUDE.md's three lines with them so the guide and
the code move as one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Four image links under docs/screenshots/ (dashboard, map, trace, picocalc)
with a comment above them saying what to capture, so taking the pictures is
the only step left. They render as soon as the files exist.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Preferences page loads the font the moment its value is picked, rather than
after Apply: a VT has one font for the whole screen, so the only honest way to
show what the 6x8 build looks like is to load it, and the page is the preview,
repainting at the new row count on the kernel's SIGWINCH. The page tracks what
the console is drawn in right now; staging the saved value again reloads it at
once, Apply keeps whatever is showing (the tool's re-apply after the write then
finds nothing to change), and leaving with a discard reloads the saved font.
Off the handheld the service says no once at page open and is asked nothing
more. Four tests drive the page through each path with the service stubbed.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A Linux VT loads one font for the whole console, so asking for the 6x8 build
(53x40, fourteen rows more) changes what the shell is drawn in too. The new
console_font preference (6x12 default, 6x8 the alternative, offered on the
PicoCalc only, round-tripping through preferences.yaml on every platform)
therefore comes with services/consolefont.py: remember the font the shell had
with `setfont -O`, apply the one the preference names, and restore it on every
way out -- the menu's finally and an atexit hook, since ^Q and an unhandled
error leave by other doors. Verified on the device that setfont -O captures
the current font with its unicode table and that feeding it back reproduces it
exactly, with no sudo, because the VT is the process's own controlling
terminal. Only the interactive menu switches; a scripted run never touches the
console it was invited into. Changing the preference on its page applies live.
Shipping both fonts needed the licence untangled: the 6x8 base is the Linux
kernel's font_6x8 bitmap, GPL-2.0, so its build moves into
calculinux-console-font-6x8.sh under that licence with the GPLv2 text beside it
in scripts/LICENSE.GPL-2.0. The shared generator stays in the 6x12 script
between BEGIN/END markers and the 6x8 script executes that block, so the marks,
donors and aliases the font contract pins exist in one place. The produced PSF
is a data file the kernel console reads; MeshTerm never links or bundles it, and
NOTICE and the hardware manual say so. PrefSpec gains a platforms gate for the
page; the labels use an ASCII x because U+00D7 is not in the console font.
The 6x8 base has no Cyrillic; the manual says so and the owner accepts it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A pre-release architecture and QA pass, applied as one change because the moves
share files and only the whole set was gate-tested (2480 passed, ruff clean).
Three new modules pull logic down out of layers that should not own it:
core/channel_probe.py (ChannelSlot, read_channel_slots, probe_channel_slots)
so services/device_state.py no longer imports a screen; services/markers.py
(gather_markers, with MapMarker a core/models dataclass) so two screens stop
importing a tool; core/tracing.py (trace_timeout, path_hash_flags) so
core/connection.py no longer imports services. The routing-prefix width is
DeviceState.routing_prefix_bytes(), replacing five private cross-module imports.
One definition per thing: is_path_hash, the NodeResolver/NameKeyResolver
aliases, TILE_RETRY_SECONDS, haversine_km, marks.SELF_MARK, MENTION; nine
private names that crossed module boundaries got public ones and menus.__all__
lists what other modules import. A preference's default is written once
(ALERT_CAP, DONE_CAP, DEFAULT_VIEW_FRACTION read the registry), the stranded
PREFERENCES doc comment sits on its subject, and three docstrings stop naming
questionary, a library dropped long ago.
The command line gains --version (eager, exit 0, documented, tested) and drops
the -p short form on trace, trace-path and tx-optimize: the root lifts -p as
--profile before a leaf ever sees it, so the leaf's could never work, and a
derived test now checks every leaf against every root short option.
tx-optimize with a one-hop --path is a usage error, exit 2, because nothing
transmitted is not a device failure. Log handlers are closed before they are
cleared (197 unclosed-file warnings gone), chat's fire-and-forget tasks keep a
reference, coroutines use get_running_loop(), the never-awaited MapScreen._load
in a test is awaited, and the CLI sweep passes --no-ble to devices so a test
run stops turning on the Bluetooth radio three times (the suite is 40 % faster).
The about page lists every dependency, and the release skill bumps the README's
download names, which still said 0.2.8.
apply_ops stays in tools/: it and its helpers build report blocks and open two
screens, so moving it to core/ would invert core over ui. The widgets CLAUDE.md
names by their private spellings (_format_age, _NODE_GLYPHS) keep them until
CLAUDE.md is edited alongside.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Hatchling's default sdist is everything git does not ignore, which packed the
Claude skills, the GitHub configuration, the PyInstaller spec, the device-side
scripts and the developer environment template into an archive whose only job
is to build and test the wheel. An exclude list keeps the package, the tests
and their fixture, the manual and the files a build reads. The build backend
floor is hatchling 1.26, the first to write the PEP 639 licence fields into the
metadata; an older one built a wheel that said nothing about the licence.
Workflow comments that reasoned from a private repo's metered minutes are
reworded for the public one, a skill's usage line stops naming one machine's
venv, and the scheduler's lock file is ignored in the tree rather than only in
one clone's info/exclude.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
docs/hardware.md is the single place a reader goes to put MeshTerm on a
PicoCalc or a uConsole, written in the shape of the command-line manual: what
the three targets are and which exclude each other, why the console font is
built on the device, every phase of the Calculinux bring-up and its knobs, the
XIAO UART radio from parts to a verified link, the SPI bridge with an honest
note that it was written against pymc_core 1.0.x while today's uConsole stack
depends on the renamed openhop-core, and a closing list of what has only ever
been proven on one bench. scripts/README.md and xiao-radio/README.md become
short indexes pointing at it; the old ones were stale in four places (trace
through the bridge works, the firmware env is _serial, two scripts were
unlisted). README links the manual, gains the two dependency rows it lacked
(markdown-it-py, PyYAML) and a fixed fonts anchor.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A read-through of scripts/ ahead of the public release, applying only what could
be verified from the code. The setup script clones over public HTTPS when no
deploy key sits at KEY_PATH and keeps the SSH path when one does, and its
timezone is a TIMEZONE knob rather than a hardcoded city. The flasher recognises
the plain XIAO nRF52840's bootloader (PID 0x0044) as well as the Sense's
(0x0045), both from Adafruit's board.h. The mux unit was After= the very target
that WantedBy= pulls it into, an ordering cycle; it now orders on basic.target,
which still wants a check on the device. The console-font header stopped
claiming a default run installs /etc/vtrgb (it removes the custom remap), and
states that the font it builds is an OFL-1.1 Terminus derivative that must not
be called Terminus and that the optional 6x8 candidate embeds a GPL-2.0 kernel
bitmap. The radio-bridge header describes the four phases the script actually
runs instead of a pin-routing phase it never contained. Personal remarks in
comments are reworded impersonally.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
"🛣 Longest distance — 5th place: 112.0 km": the discipline written the way its board
heading writes it — discipline_label, the mark padded to the measured lane so a
one-cell 🛣 and a two-cell 🎯 start their titles in the same cell — then the standing
and the metric. The bare mark-and-number it replaces was dry, and it had to lean on the
title bar for the discipline; now the header names the record and the bar names the
kind of page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The node page's identity header, for a record: one line above the strip carrying the
discipline's own mark (the one its board heading wears) and the score in the
discipline's unit, which is the one thing the record is — the title bar already names
the discipline and the standing. The score lane that repeated it on Info is gone, and
the metric's spelling is one function, record_score, shared with the board's score
lane so a partial Longest-distance walk reads ≥ in both.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Info is the record's stats with the page's actions at its foot, the cursor opening on
Trace; Route is the walk two ways — THE route graph, its key, the route line — with
Trace this path as its one row, so Enter there walks the route on show, the node page's
rule for its Routes tab; Area is the ground drawing, unchanged. Each tab's stage is
composed once per width and cached, and the footer names only what the tab answers: a
lone action row earns no ↑↓ atom. The gallery gains the Route tab as a specimen.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The node page's shape (widgets.tab_strip, Tab/Shift+Tab, the next tab on F3): Stats is
the record read — its stats, identity first, then the route two ways — with the action
rows at its foot; Area is the ground drawing across the whole stage the viewport leaves
under the strip, so the shape gets every row and column the page has rather than the
block a stacked layout could spare it. The Area tab is offered only for a walk with a
drawable shape; a record without one keeps a lone-tab heading and nothing to switch. A
page too narrow to draw on says so instead of squeezing.
widgets.tab_air is the strip's platform-bound air, hoisted from the node page so both
tabbed screens spend it the same way. The gallery gains the Area tab as a specimen on
both platforms.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Rich's centre justify strips each row's trailing spaces before it pads it, so a
code row whose right edge was light modules lost cells and landed a column off
its neighbours; the bottom-left finder square came out one cell skewed, and a
camera could not lock on. The About pages' codes were never centred, which is
why only the full-screen share codes broke.
A code is now moved across a line one way only: the same indent in front of
every row, computed once from the fitted code's width. The test pins that all
rows share a width and every finder starts in the same column.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three body headings — Stats, Area walked, Route — each with the note that used to be a
faint caption under its block, so a page this tall can be skimmed by its landmarks. The
record's identity leads its stats: the spec walked and when it was set, then what the
walk measured. The area drawing takes the page's whole width and rows in step with it,
a quarter of the columns (half as tall as wide in braille dots), so a wider page is a
bigger shape rather than a padded one; rows a flat shape leaves blank are still
trimmed, so a tall box costs it nothing.
widgets.body_heading is THE form for a heading inside a page's body — accent title,
muted note — hoisted from the Time Machine's private copy.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A camera reads contrast, and a light-on-dark code is what a scanner expects
of a screen, so every code MeshTerm draws is now pure white ink on a pure
black field (the theme's `qr` style, both ends named on both themes), never
black on white.
The share views — a channel's share link, a contact card, the CLI's share
commands run in the menu — are no longer a titled popup with an instruction
over the code. They are `QrScreen`, a **bare frame**: `Screen.bare` and
`frame.compose_bare` draw the body alone on blank rows, with no header, no
footer, no title bar, no box, no hint and no F-key lane, and nothing on it
but the code and the URL it encodes, sat a little above centre. Esc leaves.
The code fits itself to the frame every paint, width and rows both: the
standard fit first, then a lighter error level, then a narrower quiet zone,
before it would ever be cut — a contact card is 57 cells and 29 rows at the
standard fit, the PicoCalc is 53 across and a regular terminal 24 tall. When
code and URL can't share the frame the code is whole at the top and the URL
a page down. The frame states its height before it asks for the body, which
is what lets the screen size to it.
A `qr` fence in a written page is the one exception and keeps its place in
the prose — the About pages' codes flip to white on black like the rest.
Found on the way: the PicoCalc's SGR quantizer matched a colour only when it
was a whole sequence, and Rich writes a style's foreground and background as
one sequence (`ESC[38;2;…;48;2;…m`), so a white-on-black module reached the
console in truecolor. It now walks every sequence's parameter list.
The standard is written into CLAUDE.md under Screens and lists; the gallery
carries the share screen as a specimen on both platforms.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The area drawing rode beside the stats in a third of the width, which squeezed the
shape and left no cell for a label on any pin. It is a block of its own now, between
the stat lanes and the route graph — page-wide up to a cap, a fixed eight rows, north
up, the shape against the left edge under the left-aligned stats — and every hop's pin
carries its first hash byte, placed the way the map places a name (beside the pin,
clear of the drawn lines where it can, dropped rather than overprinting), so a pin and
the graph node under it match by eye. The star stays bare: it already says who that is.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>