One USB-C cable on the shopping list, not two
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
This commit is contained in:
1 parent
92f6f20dd3
commit
4afb70378a
1 file changed
+1
-1
+1
-1
@@ -64,7 +64,7 @@ a radio in the meantime.
|
||||
| Soldering iron, fine tip, and solder | For the four radio wires. |
|
||||
| Hookup wire, 26–30 AWG, four short lengths | TX and RX get crossed — see [Step 14](#step-14--wire-the-radio). |
|
||||
| 2.5 mm hex key | Comes with the PicoCalc kit. |
|
||||
| USB-C data cable, ×2 | One is convenient for the serial console, a second for flashing the XIAO — you can get by with one and swap it. |
|
||||
| USB-C data cable | For the serial console, and later for flashing the XIAO. A charge-only cable won't do; it has to carry data. |
|
||||
| microSD card reader | For writing the Calculinux image from your PC. |
|
||||
| Small side cutters | For trimming wire ends. |
|
||||
| Kapton (polyimide) tape | Wraps the XIAO stack and the DIY USB lead so nothing bare touches the board or the shell. Heat-proof, thin, and it peels off cleanly. |
|
||||
|
||||
Reference in new issue
Block a user