The screen and screw-post warnings say the author broke both
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
This commit is contained in:
1 parent
06fbe0313b
commit
92f6f20dd3
1 file changed
+6
-3
+6
-3
@@ -128,8 +128,9 @@ program built for exactly that.
|
||||
## Three ways to break it
|
||||
|
||||
The PicoCalc is a kit, and its forum has a well-worn list of the ways people have damaged
|
||||
theirs. Three of them apply directly to this build. Read this section before you open the
|
||||
shell.
|
||||
theirs. Three of them apply directly to this build, and the first two are not theoretical:
|
||||
the author of this guide **cracked a screen and snapped screw posts** building the very
|
||||
machine it describes. Read this section before you open the shell.
|
||||
|
||||
> ⚠ **The screen is extremely fragile.** It is a bare glass panel with no frame of its own,
|
||||
> and when the case is closed it sits directly against the mainboard. Anything that flexes
|
||||
@@ -138,7 +139,7 @@ shell.
|
||||
> while the halves are being screwed together. Forum members have cracked screens doing
|
||||
> each of those, and the swap in [Step 2](#step-2--swap-the-pico-for-the-lyra) is the
|
||||
> classic one — pressing a new board into the socket with the mainboard still in the case
|
||||
> is enough on its own.
|
||||
> is enough on its own. That is exactly how the screen in this guide's own PicoCalc broke.
|
||||
> ([Before replacing the Pico](https://forum.clockworkpi.com/t/before-replacing-the-pico-read-this-to-avoid-cracked-screen/16666),
|
||||
> [Avoid breaking your screen](https://forum.clockworkpi.com/t/avoid-breaking-your-screen/18805))
|
||||
>
|
||||
@@ -161,6 +162,8 @@ shell.
|
||||
> into plastic, and forcing a screw snaps the post out of the shell — a repair that needs
|
||||
> epoxy and never quite comes back
|
||||
> ([Broken screw thread](https://forum.clockworkpi.com/t/broken-screw-thread/20726)).
|
||||
> This guide's author snapped several on the first assembly; it takes less force than you
|
||||
> would think.
|
||||
> Turn each screw until it just seats, then stop. If a screw won't go in easily, the halves
|
||||
> aren't aligned, or something inside is in the way; more force is never the answer.
|
||||
|
||||
|
||||
Reference in new issue
Block a user