diff --git a/docs/picocalc.md b/docs/picocalc.md index 8f7fe69..73a54e4 100644 --- a/docs/picocalc.md +++ b/docs/picocalc.md @@ -128,8 +128,9 @@ program built for exactly that. ## Three ways to break it The PicoCalc is a kit, and its forum has a well-worn list of the ways people have damaged -theirs. Three of them apply directly to this build. Read this section before you open the -shell. +theirs. Three of them apply directly to this build, and the first two are not theoretical: +the author of this guide **cracked a screen and snapped screw posts** building the very +machine it describes. Read this section before you open the shell. > ⚠ **The screen is extremely fragile.** It is a bare glass panel with no frame of its own, > and when the case is closed it sits directly against the mainboard. Anything that flexes @@ -138,7 +139,7 @@ shell. > while the halves are being screwed together. Forum members have cracked screens doing > each of those, and the swap in [Step 2](#step-2--swap-the-pico-for-the-lyra) is the > classic one — pressing a new board into the socket with the mainboard still in the case -> is enough on its own. +> is enough on its own. That is exactly how the screen in this guide's own PicoCalc broke. > ([Before replacing the Pico](https://forum.clockworkpi.com/t/before-replacing-the-pico-read-this-to-avoid-cracked-screen/16666), > [Avoid breaking your screen](https://forum.clockworkpi.com/t/avoid-breaking-your-screen/18805)) > @@ -161,6 +162,8 @@ shell. > into plastic, and forcing a screw snaps the post out of the shell — a repair that needs > epoxy and never quite comes back > ([Broken screw thread](https://forum.clockworkpi.com/t/broken-screw-thread/20726)). +> This guide's author snapped several on the first assembly; it takes less force than you +> would think. > Turn each screw until it just seats, then stop. If a screw won't go in easily, the halves > aren't aligned, or something inside is in the way; more force is never the answer.