Change radio parameter format in documentation
Updated radio parameter format from space-separated to comma-separated in the MQTT implementation documentation.
This commit is contained in:
1 parent
cfec3a5b58
commit
9cfaaeba82
1 file changed
+3
-3
@@ -15,11 +15,11 @@ Use one of the observer build targets (e.g., `heltec_v4_repeater_observer_mqtt`)
|
||||
If this is a fresh flash or full erase, configure your radio parameters first. These must match other nodes in your mesh:
|
||||
|
||||
```bash
|
||||
set radio 910.525 62.5 7 5
|
||||
set radio 910.525,62.5,7,5
|
||||
set tx 22
|
||||
```
|
||||
|
||||
Format: `set radio <freq_MHz> <bw_kHz> <sf> <cr>`
|
||||
Format: `set radio <freq_MHz>,<bw_kHz>,<sf>,<cr>`
|
||||
|
||||
**3. Configure device identity**
|
||||
|
||||
@@ -558,7 +558,7 @@ The migration happens automatically on first boot after firmware update. No manu
|
||||
|
||||
If this is a fresh flash, radio parameters must be set to match your mesh network:
|
||||
```
|
||||
set radio 910.525 62.5 7 5
|
||||
set radio 910.525,62.5,7,5
|
||||
set tx 22
|
||||
```
|
||||
|
||||
|
||||
Reference in new issue
Block a user