From 9cfaaeba82695f648688b342a863f08f970b40c7 Mon Sep 17 00:00:00 2001 From: Adam Gessaman Date: Thu, 23 Apr 2026 20:40:22 -0700 Subject: [PATCH] Change radio parameter format in documentation Updated radio parameter format from space-separated to comma-separated in the MQTT implementation documentation. --- MQTT_IMPLEMENTATION.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MQTT_IMPLEMENTATION.md b/MQTT_IMPLEMENTATION.md index 2516e2605..bb7c31290 100644 --- a/MQTT_IMPLEMENTATION.md +++ b/MQTT_IMPLEMENTATION.md @@ -15,11 +15,11 @@ Use one of the observer build targets (e.g., `heltec_v4_repeater_observer_mqtt`) If this is a fresh flash or full erase, configure your radio parameters first. These must match other nodes in your mesh: ```bash -set radio 910.525 62.5 7 5 +set radio 910.525,62.5,7,5 set tx 22 ``` -Format: `set radio ` +Format: `set radio ,,,` **3. Configure device identity** @@ -558,7 +558,7 @@ The migration happens automatically on first boot after firmware update. No manu If this is a fresh flash, radio parameters must be set to match your mesh network: ``` -set radio 910.525 62.5 7 5 +set radio 910.525,62.5,7,5 set tx 22 ```