sb-lora: correct U1-U7 rotations in CPL for JLC part models
Checked in JLC's placement preview: U1, U2, U4 needed a 90 deg clockwise turn (270) and U3, U5-U7 a 180 deg turn for pin 1 to land on the pin-1 pad. Y1 and D1 were already correct.
This commit is contained in:
1 parent
cf22b6dbde
commit
a9980648bf
2 files changed
+8
-8
No files matched your search
@@ -23,7 +23,7 @@ A Springboard module for the Handspring Visor that carries a Seeed XIAO nRF52840
|
||||
|
||||
- PCB: 2 layers, **1.6 mm**, 1 oz, any color. **ENIG recommended** (flat pads for the 0.65 mm TSSOP, SC-70 parts and the straddle connector); lead-free HASL works too.
|
||||
- Board is 50.43 x 75.15 mm. The bottom 50.47 mm is the in-slot section, using springSD's exact outline. The top 24.6 mm sticks out of the Visor and carries the XIAO stack.
|
||||
- Assembly: top side, Economic PCBA is fine. Upload BOM + CPL. **Check part rotations in JLC's placement preview** before paying, especially U1-U7, Y1 and D1; KiCad and JLC disagree on rotation for some SOT/SC-70 footprints. Pin 1 of each IC is marked on the silkscreen and assembly drawing.
|
||||
- Assembly: top side, Economic PCBA is fine. Upload BOM + CPL. **Check part rotations in JLC's placement preview** before paying, especially U1-U7, Y1 and D1; KiCad and JLC disagree on rotation for some SOT/SC-70 footprints. Pin 1 of each IC is marked on the silkscreen and assembly drawing. The CPL already includes the corrections found in the first order's preview (U1, U2, U4 at 270; U3, U5-U7 at 180), so the dots should land on the pin-1 triangles without adjustment. Still glance at the preview: JLC can change its part models.
|
||||
- Extended parts: SC16IS740 (C407851), 74LVC1G80 (C353857), crystal (C2901666) and probably the SN74LVC1T45 (C9382) and 74LVC1G04 (C10237). Expect extended-part loading fees.
|
||||
|
||||
## Parts you fit by hand
|
||||
|
||||
@@ -18,11 +18,11 @@ R1,89.000000mm,-112.000000mm,Top,90.000000
|
||||
R2,89.000000mm,-70.500000mm,Top,90.000000
|
||||
R3,100.000000mm,-89.000000mm,Top,90.000000
|
||||
R4,85.000000mm,-52.500000mm,Top,90.000000
|
||||
U1,107.000000mm,-113.500000mm,Top,0.000000
|
||||
U2,112.000000mm,-113.500000mm,Top,0.000000
|
||||
U3,117.000000mm,-113.500000mm,Top,0.000000
|
||||
U4,100.000000mm,-101.000000mm,Top,0.000000
|
||||
U5,93.000000mm,-83.000000mm,Top,0.000000
|
||||
U6,100.000000mm,-83.000000mm,Top,0.000000
|
||||
U7,107.000000mm,-83.000000mm,Top,0.000000
|
||||
U1,107.000000mm,-113.500000mm,Top,270.000000
|
||||
U2,112.000000mm,-113.500000mm,Top,270.000000
|
||||
U3,117.000000mm,-113.500000mm,Top,180.000000
|
||||
U4,100.000000mm,-101.000000mm,Top,270.000000
|
||||
U5,93.000000mm,-83.000000mm,Top,180.000000
|
||||
U6,100.000000mm,-83.000000mm,Top,180.000000
|
||||
U7,107.000000mm,-83.000000mm,Top,180.000000
|
||||
Y1,108.000000mm,-101.500000mm,Top,90.000000
|
||||
|
Reference in new issue
Block a user