This is R0b3's Discord Bot. It's creation was basically a challenge posed a coworker who said "Hey, you can write Discord Bots in Python... Make one to display your 3D printer status!".

Features

Query & Monitor OctoPrint 3D Printer Status using the $printstat command (Requires that your printer is connected to Octoprint)
Query & Monitor Bambu Lab Printer Status using the $bambustat command (Requires a Bambu Lab printer accessible on the local network via MQTT)
- Displays print state, progress percentage, time remaining, current layer, bed temp, nozzle temp, and chamber temp
- Optionally captures and attaches a camera snapshot from the printer's RTSPS stream (requires ffmpeg on the host)
- Updates the bot's Discord status to show live Bambu print progress while a print is running
Play a selection of sound clips to voice channel members using the various commands ($torololo, $oops, $promoted, etc)

Commands

Requirements

Install all Python dependencies using the provided requirements.txt:

pip install -r requirements.txt

Dependencies:

discord.py[voice] >= 2.6.4 — Discord bot framework (voice support included)
requests >= 2.32.3 — HTTP client for HomeAssistant REST API calls
bambu-connect >= 0.3.1 — Bambu Lab printer integration via local MQTT
paho-mqtt >= 2.0 — MQTT client library (required by bambu-connect)

Optional: Camera snapshot support

To enable camera snapshots with $bambustat, ffmpeg must be installed on the host running the bot. Set bambu_camera_enable = true in bot_config.conf once ffmpeg is available.

Configuration

Create a Discord Bot via the Discord Developer Portal
Copy bot_config.conf.example to bot_config.conf and fill in your values (see below)
Rename octoapi.conf.example to octoapi.conf and configure OctoPrint settings (if using OctoPrint)

bot_config.conf Keys

Key	Description
`discord_auth_token`	Bot token from the Discord Developer Console
`bot_command_prefix`	Command prefix (e.g. `$`, `!`, `/`)
`hass_url`	URL to your Home Assistant instance
`hass_token`	Long-lived access token for Home Assistant REST API
`hass_light`	Entity ID of the light at your printer
`octoprint_ip_address`	IP address of your OctoPrint/OctoPi host
`bambu_ip_address`	IP address of your Bambu Lab printer on the local network
`bambu_access_code`	Access code shown on the printer screen (Settings > WLAN)
`bambu_serial_number`	Serial number of your Bambu Lab printer
`bambu_camera_enable`	Set to `true` to capture camera snapshots with `$bambustat` (requires ffmpeg)
`statping_enable`	Set to `true` to enable StatPing service status integration
`statping_url`	URL of your StatPing instance
`statping_api_key`	API key for StatPing
`mmr_checker_enable`	Set to `true` to enable MMR checker
`mmr_checker_interval`	Seconds between MMR checks
`mmr_api_url`	MMR API URL