The on/off switch never made sense for a pure listener: recording is now unconditional, so the toggle submenu, the persisted preference (MonitorStore/monitor.json), and the header's ON/OFF framing are gone. The monitor registers its hub subscription at startup — a device-free step that cannot fail — and its run row opens lazily on the first observation, so recording follows the hub wherever it opens (eagerly, or deferred by connect_on_start) and silent sessions leave no empty runs. The menu entry is now just the read side, "Heard nodes", and the header shows live heard counters instead of a switch state. meshterm monitor on the CLI drops --on/--off for a bounded foreground capture (--seconds N, 0 = until Ctrl-C, mirroring chat listen): it tails each overheard packet live and summarizes the window's heard nodes when it ends, while persisting history exactly like a session. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
93 lines
5.2 KiB
Markdown
93 lines
5.2 KiB
Markdown
# MeshTerm
|
|
|
|
A modern, extensible command-line toolkit for tuning and exploring a
|
|
[MeshCore](https://meshcore.co.uk/) mesh through a serial- or Bluetooth-connected companion
|
|
device.
|
|
|
|
MeshTerm is interactive by default (a Rich + Questionary menu) and fully scriptable
|
|
(every menu option is also a Typer subcommand). Every run is logged to SQLite and can be
|
|
turned into interactive HTML visualizations.
|
|
|
|
## Features
|
|
|
|
| Feature | Status | What it does |
|
|
| --- | --- | --- |
|
|
| **Trace** | ✅ skeleton | Run repeated path traces to a target and aggregate per-hop SNR. |
|
|
| **Device info** | ✅ skeleton | Show the connected companion device's identity and radio config. |
|
|
| **Node list** | ✅ working | List this node and its known contacts — full public keys with the path-hash prefix highlighted. |
|
|
| **Device config** | ✅ working | View and change every setting (name, radio, behavior, experimental), with TOML backup/restore, channels, and gated destructive ops. |
|
|
| **Device discovery** | ✅ working | Enumerate serial *and* Bluetooth LE companions, pick one interactively, and remember the last good default. A dropped link (unplug, power-off, or BLE out-of-range) is detected live and offers to reconnect. |
|
|
| **History / DB** | ✅ skeleton | Every tool execution and measurement is persisted and queryable. |
|
|
| **TX-power optimization** | ✅ working | Sweep transmit power (coarse + refine), converge on the best signal, optionally apply, render an interactive chart. |
|
|
| **Link budget** | ✅ working | Predict time-on-air, receiver sensitivity, range, and duty-cycle/dwell headroom for a radio config — offline, no radio needed. |
|
|
| **Chat** | ✅ working | Live full-screen channel and direct messaging — a scrolling transcript with a pinned input line where sent and received messages stream together. Every message is logged to SQLite, unread counts show in the menu header, and `chat send/history/list` script the same from the CLI. Channels are picked here; edit them in `config`. |
|
|
| **Passive monitor** | ✅ working | Always-on background logger that records every overheard advert/telemetry (SNR, RSSI, location) to a longitudinal history while you use the app; live packet counts show in the menu header, the heard-node summary is a menu item, and `meshterm monitor --seconds 60` captures a bounded window from the CLI. |
|
|
| **Link health** | ✅ working | Compare a target's recent traces to its rolling baseline and flag SNR/reliability regressions, end-to-end and per hop. |
|
|
| **Route map** | ✅ working | Aggregate trace history into an interactive route-stability graph — which links are stable, which the mesh flaps between, with churn metrics. |
|
|
| **Path optimization** | 🚧 planned | Discover and score mesh paths from neighbors outward. |
|
|
| **Visualizations** | 🟡 partial | Plotly TX-sweep chart (HTML) done; pyvis mesh graph + time-series planned. |
|
|
|
|
## Install
|
|
|
|
```bash
|
|
pip install -e ".[dev]"
|
|
```
|
|
|
|
Python 3.10+ is required (matching the `meshcore` library).
|
|
|
|
## Usage
|
|
|
|
```bash
|
|
# Interactive menu (default)
|
|
meshterm
|
|
|
|
# Connect over Bluetooth instead of USB (address from `meshterm devices`)
|
|
meshterm --ble AA:BB:CC:DD:EE:FF info
|
|
|
|
# Scripted: every menu option is also a subcommand
|
|
meshterm trace --target Alice --samples 10 --profile yagi
|
|
|
|
# Force a route through specific repeaters (MeshCore-app style): comma-separated
|
|
# contact names and/or hex key prefixes, mixed freely. Blank lets the device route.
|
|
meshterm trace --target Alice --path "3d,f2,3d"
|
|
meshterm trace --target Alice --path "3d,Bravo-Repeater,f2"
|
|
meshterm tx-optimize --target Alice --samples 6 --step 3 --apply
|
|
meshterm info
|
|
meshterm history
|
|
|
|
# Messaging: live chat in the menu, or scripted from the CLI
|
|
meshterm chat # interactive: pick a conversation, chat live
|
|
meshterm chat send --to Alice "on my way" # direct message
|
|
meshterm chat send --channel 0 "net in 5" # channel broadcast
|
|
meshterm chat history --to Alice
|
|
meshterm chat list
|
|
|
|
# Device configuration: view, set, back up, restore
|
|
meshterm config # show all current settings
|
|
meshterm config set radio_sf 9 # change one setting
|
|
meshterm config backup node.toml # archive every setting to TOML
|
|
meshterm config restore node.toml --dry-run
|
|
|
|
# No radio attached? Use the built-in simulator for development.
|
|
meshterm --mock trace --target Alice
|
|
```
|
|
|
|
## Architecture
|
|
|
|
MeshTerm is layered so features are added by dropping a single file in `meshterm/tools/`:
|
|
|
|
```
|
|
cli.py Typer app; no subcommand -> interactive menu
|
|
context.py AppContext (console, config, repository, device) dependency container
|
|
core/ Domain: models, config + device profiles, connection abstraction (+ mock)
|
|
tools/ Pluggable "menu options"; each self-registers and gets logging for free
|
|
services/ Algorithms (trace aggregation, tx search, path exploration) — no UI
|
|
persistence/ SQLite schema, repository, structured logging
|
|
ui/ Rich theme/widgets + Questionary menu
|
|
viz/ Plotly / pyvis renderers -> HTML & PNG
|
|
```
|
|
|
|
Adding a feature means subclassing `Tool`, decorating it with `@register`, and
|
|
implementing `run()`. The same registry builds both the CLI and the menu, and the base
|
|
class wraps every execution in a logged `runs` row automatically.
|