19 tests covering the persistence layer: field round-trip for successful
and failed traces (hops, RTT, tx_power, timestamp), recent_traces
ordering/limit/target filtering, all_traces cross-target span,
traced_targets count-ordering, latest_trace success_only variants,
and full run lifecycle (start → finish, error without summary, limit,
ordering).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Introduces `route-map`, which turns stored traces into a directed mesh graph
with per-link traversal counts, median SNR, and route-churn metrics (stability
score, Shannon entropy, distinct-route count). Includes pyvis HTML renderer
and a refactored _hydrate_trace helper in repository.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Splits a target's persisted trace history into a recent window and an older
baseline and flags end-to-end (bottleneck SNR, success rate) and per-hop link
SNR metrics that dropped beyond a threshold, with warn/critical severity.
Adds Repository.recent_traces / traced_targets, a pure link_quality service,
and a `link-health` tool that can analyze stored history or take fresh traces
first. Also tidies the repository import ordering.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a Device.listen capability (real + mock), an Observation/HeardNode
domain model, an observations table with Repository.record_observation /
heard_nodes aggregation, and a `monitor` tool that listens for a window and
logs every overheard advert/telemetry (SNR, RSSI, shared location) to the
database. This is the longitudinal substrate later features read back.
The real-hardware event-payload mapping is best-effort and, like the trace
mapping, flagged for validation against the firmware's event schema; the mock
device synthesizes plausible adverts so the tool and tests run without a radio.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Predict time-on-air, receiver sensitivity, max path loss, range, and
duty-cycle/dwell headroom for a LoRa radio config with no radio attached.
Radio params default to the connected device's config but every value is
overridable; a fully specified invocation never opens the serial port.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two correctness fixes for remote-admin TX optimization:
1. Reverse/round-trip measurement path. The optimizer traced a one-way path
ending at the (possibly far) target and waited for the target itself to
originate the trace reply, which never returns when the target is only
reachable via other repeaters, so every trace timed out. Now we trace out
to the target and back (the MeshCore A,B,A convention) so a reachable
near node answers; the target only forwards. Its received SNR is read from
its hop by hash (the round trip turn-around) rather than by position.
2. Restore original TX on no result. If not one trace gets through at any
level there is no meaningful winner, so leave the node at its original
power (applied=False) and warn, instead of writing a bogus value.
Mock updated to model each hop SNR from the node that transmitted into it and
to drop traces on the bottleneck hop. Added round-trip / target-hash tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Remove unused utcnow / HopEdge imports (F401).
- Assert DeviceCommandError instead of bare Exception in the admin-login test (B017).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tune the TX power of a remote node we have admin rights on (the hop before
a chosen target) to maximize the SNR the target receives from it, instead of
tuning the local device against a path bottleneck.
- Device gains admin_login / get_remote_tx_power / set_remote_tx_power
(MeshCoreDevice via send_login_sync + `set tx <dbm>` send_cmd; MockDevice
models target SNR as an inverted-U in the admin node's TX with a reliability
dropoff at the band edges).
- tx_optimizer: forced-path sweep with a lexicographic objective (reliability
first, then SNR), median-based levels, coarse+refine search, and a verify
pass; near-SNR ties break toward lower power. Outlier-robust by construction.
- AdminStore remembers per-node admin passwords in <config_dir>/admin.json
(owner-only perms), cleared automatically when a login is rejected.
- Configurable 12-28 dBi default range (tx_opt_min/tx_opt_max).
- tx-optimize tool: path/password prompts, live progress, persistence, applies
the winner on finish, and renders an interactive HTML chart.
- Rewrote TX result models, widgets, plot, repository.record_tx_sample, and the
TX tests for the new flow.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Annotate our own device with its hash on the route line, the per-trace
From→To table, and the per-hop medians table, truncated to the command's
path-hash width like every other hop. Unify link rendering on
_route_node_text so all three reads consistently as name (hash).
In the info panel, replace the standalone node-hash line with a Nodes
table: our node listed first with its name highlighted, and every node's
full public key shown with its path-hash prefix highlighted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Trace:
- Auto-path now ends every route at the target's own hash (verified on
hardware: a trace only replies when its destination is the final hop), so
direct neighbors and learned multi-hop routes both resolve correctly.
- Retry the transient "no event received during contacts retrieval" blip and
surface a clean DeviceCommandError instead of a raw traceback.
- Route summary annotates each node with its hash at the command's path-hash
width, wrapping after an arrow when the line is too long.
- Default trace count changed from 5 to 3.
Also includes the in-progress device-config feature (config_io, device_config,
config tool, config editor UI, tests) and related supporting edits.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MeshTools is a Rich+Questionary interactive / Typer-scriptable toolkit for
tuning a MeshCore mesh over a serial companion device, with SQLite-logged runs
and Plotly visualizations. Includes the skeleton (trace, info, history),
TX-power optimization, and a MockDevice simulator (--mock).
Device discovery & selection:
- core/discovery.py: enumerate serial ports (pyserial), flag/sort likely LoRa
hardware by USB vendor id, stable_id for replug-safe identity.
- core/device_store.py: remember the last successfully connected device in
<config_dir>/devices.json (independent of --db).
- core/selection.py: non-interactive resolver (--port > profile > remembered >
sole device > guidance error) for the CLI.
- ui/device_picker.py + menu startup: interactive picker preselecting the
remembered default; banner reflects the choice.
- tools/devices.py: `meshtools devices` lists/marks attached devices.
- AppContext resolves the port and records last-known-good on connect success.
Fixes:
- theme.py: force UTF-8 on stdout/stderr so glyphs don't crash legacy consoles.
- connection.py: friendly message when meshcore is missing; pin meshcore>=2.3.
- trace/tx-optimize: fall back to free-text target entry when the device
reports no contacts (autocomplete requires non-empty choices).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>