scripts/video.py runs the demo mesh headless in the terminal set of the screenshots, types a tour of less than two minutes, and records the screen 30 times a second. It paints each different screen in parallel, encodes the video with ffmpeg, and writes demo.mp4, its poster, and its play card into the website checkout's src/. The camera stops while the tour waits for something slow, so the video jumps over the wait.
screenshots.py gives the video its app runner, its environment, and an RGB painter. The terminal screenshots stay pixel-identical. The glossary gains "video frame".
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Measured against a real Montreal database: most messages arrive twice,
through the two repeaters a companion hears, on paths that share their
start and split near the end, with 3-byte hashes. The demo did five or
six short copies through five neighbours.
Our node now hears only two new rooftop repeaters, Villeray and
Rosemont (the terrain hides the big ones), companions lose 7 dB at street
level, and each sender has its own hash width (mostly 3 bytes). Now 91%
of messages arrive twice and 83% of paths use 3-byte hashes. Noor moves
to Côte-des-Neiges to stay in reach, and the traces leave through
Villeray or Rosemont.
The capture finds the Message paths message by its text (a key press
can be lost while the transcript draws) and selects the second path,
since the first is often a straight line.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
scripts/screenshots.py draws logo.71.ans and logo.53.ans, through the
splash's own loader and the emulator's Terminus raster, in the Campbell
colours, into docs/screenshots/splash/logo.<width>.png at one image
pixel per font pixel. The website takes its splash from there, so it
always shows the art that the app shows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The four captures in the README are now the terminal set from the demo
mesh: the main menu, the chat, the paths of a message, and the map. The
old dashboard, map, trace, and path images, which showed real nodes,
are gone. docs/README.md says where the set folders come from.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
scripts/screenshots.py runs MeshTerm --demo in the emulator's session,
with no window, and types its way to the main menu, the chat on Public,
the paths of a message, and the map. It saves each screen for the
terminal (80x24, drawn in Cascadia Mono with its own box, braille, and
Powerline shapes), the Cardputer Zero, and the PicoCalc (the emulator's
own raster, at 3x), into docs/screenshots/<set>/.
Two runs give the same pixels: the clock is pinned to 11:42 on Thursday
15 October 2026 in Montréal (time-machine and TZ), and the demo device
plays no background traffic during a capture (PLAY_BACKGROUND). Gabriel
in Beloeil joins the demo, so the message shown in Message paths
arrives on five paths through Mont-St-Hilaire, and the map opens at z10.
Pillow, fontTools, and time-machine join the dev extras.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
meshterm --demo runs the simulator in a synthetic Montréal mesh: 14
repeaters on the high points (Mont-Royal to Mont-St-Hilaire), rooms,
sensors, and about twenty companions, all invented. A log-distance
link model decides who hears whom, so floods arrive on several real
paths and traces walk real routes.
At each start the demo writes its own directory (<config>/demo) again:
300 days of adverts and a dense week of traffic, bilingual channel,
direct, and room conversations whose packets decrypt, traces with
their trophy-case records, neighbour tables, a joined room, admin
passwords, regions, and Watchtower alerts. Every value comes from a
fixed seed and an age before now, so each run gives the same data.
The device plays the live traffic from the same seeds.
The repository writers that stamp now take an optional time, and
record_observations stores a batch in one commit. The test world of
--mock is unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
"Section spacing" (section_spacing_min_rows, in the Display group)
replaces "Author spacing" and "Spacing from". It is the smallest
terminal that gets the line: any height, 20, 24, 30, or 40 rows, or
never (default 24). Each section heading of a list gets the line, and
the chat keeps it between authors and before a new day.
The frame records the terminal rows on the screen before the body
renders (note_terminal_rows), and Screen.section_spacing is the one
test. section_heading marks its row as spaced, and the select list
adds the line, never at the top, after a blank line, or under a
heading. The hand spacers before headings are gone, except the seam
between the region table and its actions, which is two lists.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
MeshTerm runs the same on the Cardputer Zero (C154) and the Cardputer Zero
Lite (C155): the Lite only leaves out a camera, motion sensors, and the
microSD card, none of which MeshTerm uses. The device manual, the README,
the manuals index, and the About page now say that both models are supported,
and the manual says that the Lite needs a card with M5Stack's system first.
M5Stack does not support hot-swapping a Cap on the Cardputer Zero, the Cap
LoRa-1262 included, and says that it may cause the device to malfunction.
The manual now puts that caution before its steps for the Cap, with M5Stack's
other caution (the antenna goes on before the power), and the steps turn the
handheld off first. It also says that MeshTerm switching the header off when
it quits does not make a Cap safe to remove. The About page says the same in
its own voice, and gains a section on the Cardputer Zero next to the uConsole
and the PicoCalc.
The README shows the Cardputer Zero's start screen (the store's capture,
three times its size) under the PicoCalc photo, and its quick start shows the
emulator command. The pip commands with the spi extra install from GitHub,
because mesh-term is not on PyPI yet. The platform comment and CLAUDE.md no
longer say that the hardware is not in hand: only a flag selects the platform
because the device-tree model is the CM0's generic string.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeshTerm is in M5Stack's app store since 0.11.0 (CardputerZero/packages#176).
The release skill now treats the store PR as part of the release: it is not
done until that PR merges, and the Discord announcement tells Cardputer Zero
owners to update from the store. The device guide no longer says that the
store may not have MeshTerm yet.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Two preferences in the Display group: "Author spacing" (auto, on, off;
default auto) and "Spacing from" (the smallest terminal, in rows, that gets
the blank line with auto; default 24). The test reads the real rows of the
terminal before each paint, so a small desktop window drops the line as the
Cardputer Zero does, and a change applies at the next paint. The transcript
cache stores the spacing, so a change draws the lines again. The CLI
manual's sample of `preferences show` is the real output again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The key parsers now return the key in the form that the user gave. Each
device takes the form that it keeps: a firmware companion expands a seed
to the 64 bytes that it accepts, and the node of an SPI radio saves the
seed as it is, the same form as a key that it makes itself. A seed is the
more complete form, and the radio library signs with it through PyNaCl.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Show private key drew its warning and no key in the menu since 0.10.0.
On the uConsole and the Cardputer Zero, MeshTerm now writes an imported
key into the node's identity.key and restarts the node. An import also
reads a file (hex text or raw bytes), expands a 32-byte seed, refuses a
key of the wrong length before the confirmation, and names a firmware
that has its import turned off. The run log no longer stores the key of
config import-key (a migration removes the stored ones), and an exported
key file is written with mode 0600. Refer to #26.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The page no longer warns that the handheld is not supported. It now gives
three ways to install MeshTerm: M5Stack's app store first, then the same
package from a GitHub release, then the source code for developers. The
README, the docs index, and the hardware guide say the same, and the
hardware guide says that the launcher selects the platform.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Greying every name that two keys ever used was too strict: a reflash with an
erase makes a new key, and 34 names on this mesh have one, JP's own among
them. Smog went grey this morning because of two keys silent since September.
The newest key now gets the name, and the name is grey only when another key
used it within name_overlap_days (a new Display preference, "Shared names",
default 7) of it: two live claimants. A contact that was never heard never
wins. On this machine's real data, LOG.IC 3R goes to its active key 47368a7c,
Smog to fa331c83, and 8 of 883 names stay grey.
The stored names come with their times from the one scan node_names() already
ran (node_names_with_times), so opening a chat costs no second scan.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
locate moves from ^Y to ^L, and the room's login from ^L to ^O, under the
chord rule of 3675226. On the map and in the mesh walk, ^L still goes to
our node. In a chat and on a room's board, ^L opens the map on the author
of the selected message (our own message: our node); on Contacts, on the
highlighted node. map_screen.Locator holds the markers that
gather_markers returns when the screen opens and answers find() at each
paint, so the "^L map" hint atom and the Shift+F1 Map chip show only
where the key acts. A room keeps Log in on Shift+F1, so ^L has no chip
on a room's board yet.
The chat's hints for a selected message go through _fit_hint, which
drops ↑↓ and then ^P only when the line passes 72 cells; the room now
reuses them. LaneDeck.action_for returns None for a slot that has only
a Shift companion.
Right Ctrl with a letter chord still does nothing on the Canadian
Multilingual layout: JP chose not to repair that.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The XIAO stopped answering on 10-07 ("No response from meshcore
node" for many starts in a row). MeshCore's serial parser reads '<'
and a two-byte length, then waits for that many bytes with no time
limit, so one lost or damaged byte can make it swallow up to 65,535
bytes, and MeshTerm sends only 16 per start. Reproduced on the
PicoCalc: a half frame blocked two APP_STARTs until 600 filler bytes
arrived. meshcore-frame-timeout.patch drops a frame after 200 ms of
silence on the line (bytes queued while the loop was busy still
count), and build-firmware.sh applies it after meshcore-uart1.patch.
Upstream dev and main still have the old parser.
Flashing the XIAO with the new firmware, following the guide as
written, found these problems, now corrected:
- Step 11: `pip install platformio` failed (no pip outside a venv on
this PC), and it fails on externally managed Pythons or lands in an
active venv. The guide now uses the official installer only, and
build-firmware.sh and flash.py find pio in ~/.platformio/penv, so
nobody edits the PATH. uf2conv runs on PlatformIO's Python, because
a bare `python` is missing on many Linux systems.
- Step 12: the script's last line said to double-tap reset first;
flash.py touches the XIAO itself, and a wired XIAO's reset button is
inside the case.
- Step 13: this XIAO's bootloader has only a serial port, and flash.py
printed a pio command for the user to run "from your MeshCore
checkout", with pio not on the PATH. flash.py now does the serial
DFU upload itself (54 s here). Without pyserial, it runs itself
again with PlatformIO's Python instead of skipping the touch.
- A wired XIAO's USB power goes backward into the Lyra through the
3V3 wire (JP confirmed it on the bench). Step 13 now applies only
before wiring, and a new Day-to-day procedure updates the firmware
of a wired radio: poweroff, switch off, open, batteries out, flash.
After the flash, the radio kept its identity, MeshTerm's info command
connected, and an APP_START after a half frame and 0.5 s of silence
got its reply at once.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
scripts/cardputer-zero/build-deb.sh runs on arm64 Debian 13 (the
Cardputer itself) and makes meshterm_<version>-<revision>_arm64.deb.
MeshTerm and all its Python packages, the spi extra included, go in
/usr/lib/meshterm, compiled to bytecode. The package depends only on
python3: the store app installs a missing dependency with apt-get but
never runs apt-get update, so a Debian dependency can fail. For the
same reason the package carries Terminus beside its OFL, because an app
from the launcher has no terminal for --fetch-fonts.
packaging/notices.py gets a site-directory mode, because the walk of
the closure asks for no extras and so misses the spi packages.
scripts/cardputer-zero/store holds the listing that czdev publish reads
and a 256-pixel icon. The screenshots are still to make.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeshTerm already stores every channel packet it hears, including those
on channels the device doesn't have. A packet names its channel only by
a one-byte hash, but a public channel's key is derived from its name, so
a candidate name can be tested: derive the key and check the packet's
MAC with it, exactly as the firmware does before decoding. The guide
tries the device's channels, Public, every #name mentioned in a stored
message, and every known region. On one desktop history that names 25
public channels.
A guessed name has to match at least two messages before the guide
shows it. The check compares three bytes, and with thousands of names
against thousands of packets roughly one false match is expected. The
candidates are grouped by their hash byte, so each packet only checks
the ~1/256 that could match; the naive loop took 40 s, this takes 1 s
on 31,000 messages, in a worker thread under a busy card, and the result
is kept for the session while its inputs are unchanged.
"Channel guide…" is the first row of "Add a channel" on the Channels
page, and it stays there when every slot is full. Channels not on the
device come first, and Enter adds one to the next free slot. Channels
the device already has follow with a ✓ the highlight doesn't walk, and a
closing line counts the messages no name matched. Each row shows the
message count, the age of the last message and seven days of activity.
`channels guide` lists the same channels on the command line.
Refs: #25
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A new device ships with Public and nothing else, so changing devices
meant adding every channel again by hand: each private key pasted, each
# name typed, each send scope and mute set again. The Channels page now
has an "Export and import" section. Export writes every channel to one
TOML file, in slot order, with its key, its send scope and its mute.
Import reads such a file and adds its channels to the device.
Import never removes a channel. The channels of the file go first, in
the file's order, and whatever else the device holds follows them. A
channel with no free slot is reported, not forced in. Before anything is
written, a dialog shows the plan (what is added into which slot, what
moves) and ends on "Nothing is removed from the device." The slots are
read again in full before the plan is made, because a probe cut short
makes an occupied slot look free.
The file uses the same [[channels]] table as config backup, so a config
backup imports too. A # channel carries no secret, since the device
derives its key from the name. A private channel carries its key, so the
file is written readable by its owner only, and the export says how many
private keys it holds.
On the command line, `channels export FILE` writes the file and prints
its path, and `channels import --file FILE [--dry-run]` prints the
device's layout after the import, one row per channel with add, move,
keep or skip. `channels import INDEX URL` still imports a single link.
Refs: #25
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The tool part of a tool comment stays exactly as it is, and the
explanation after it is prose in STE. A quoted UX label is in code font or
in quotation marks, not in italics.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Each option, field, unit, exit status, and example output stays exactly
as it was.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The four user guides and the manuals for the PicoCalc, the uConsole, and
the Cardputer Zero. Procedures are numbered steps, with a WARNING or a
CAUTION before each step that has a risk. The step headings use a colon,
and each link to them changed with them. Quoted error messages are in
quotation marks, and the menu question is quoted as the app shows it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The README, CONTRIBUTING, SECURITY, the docs index, the development
documents, the script READMEs, the comments of config.example.toml and
pyproject.toml, and the issue and pull request forms. The legal sections
of the README (attribution and licence) stay exactly as they were, between
ste: off and ste: on markers. The SignPath attribution line, the one-line
description of MeshTerm, every code block, and every URL do not change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Docstrings, comments, documents, guides, and the changelog are written in
ASD-STE100 Simplified Technical English, with Canadian spelling.
docs/development/writing-style.md has the rules, the six rules that we
bend, the conventions for docstrings and comments, and the glossary: one
word for each concept, an extension of the lexicon in CLAUDE.md. CLAUDE.md
now points to it and says which texts are not in STE. The release skill
writes the changelog in STE, under headings in the Keep a Changelog form.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Hold-to-quit was the Cardputer's alone. It is now MeshTerm's gesture
everywhere a key can be seen coming up, which a terminal never reports:
- The emulator's window, for either handheld, which reads its own keys
as the Cardputer's panel does.
- A terminal's Esc, where the keyboard can be asked whether it is still
down: GetAsyncKeyState on Windows, as the right-Ctrl rescue already
asks, and EVIOCGKEY on Linux wherever the keyboard's event device
opens (the PicoCalc, a uConsole, a user in `input`). It reads the key
state only, no events.
An Esc arriving while its key is still down is held back as a hold:
delivered as it comes up, a box after a second, gone at three. The
keyboard's repeats are part of the hold, a key typed during it goes in
behind the Esc, and on a VT stream the last repeat, which prompt_toolkit
can parse after the key is up, is dropped rather than going back a
screen behind a box the reader just let go of. On macOS and over SSH Esc
is unchanged.
SIGTERM is a quit for the interactive menu on every platform now, not
only under the Cardputer's launcher: a system shutting down gets the
same clean exit, terminal and console font restored.
EVIOCGKEY checked on the Cardputer's arm64 kernel; the Lyra was offline.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Cardputer Zero's launcher ends any app whose Esc is held: SIGTERM to
its process group at three seconds, SIGKILL three seconds after that
(cp0_esc_exit_policy.hpp in CardputerZero/launcher; M5's packaging guide
still describes an older Home-for-five-seconds rule). Its own hint never
reaches the panel while an app owns it, and MeshTerm took 3.4 s to exit,
so a held Esc ended in SIGKILL.
Now a tap of Esc is typed on its release, and a hold of one second
floats a "Hold Esc to quit" box whose bar fills over the two seconds
left. While it is up the app holds the device's transmit lock: nothing
new goes on the air, and a scoped channel send under way closes its
window first. Letting go gives the lock back and types nothing. Held to
the end, MeshTerm leaves the way Quit does, and the launcher's SIGTERM
joins that exit instead of interrupting it wherever the main thread
happened to be.
The exit itself fits: openhop-core's cleanup joined the radio's IRQ
thread, parked in an uninterruptible 30 s poll, for its full 2 s
timeout. The node drops that daemon thread from the books first. On the
device, under the real launcher, the process group now drains 1.3 s
after the SIGTERM, with no SIGKILL.
The emulator's window does the same on a held Esc, debounced for an X
server's release-press repeats.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Naming the AIO rested on the uConsole's panel alone. It now takes every
mark, from two independent sources: ClockworkPi's uConsole overlay
describing the hardware in the device tree -- the cwu50 screen, the
AXP228 power chip, the OCP8178 backlight -- and the hardware answering
for itself on USB, the built-in keyboard (1eaf:0024, made by
ClockworkPI, named uConsole; the ids alone are any LeafLabs Maple). An
overlay on the wrong machine has no uConsole keyboard, and the keyboard
on another machine has no uConsole overlay. Any one missing, and the
radio is listed unnamed on the AIO's wiring, as before.
`BuiltinRadio.compatible` gives way to `board`, a test only its machine
passes (`is_uconsole`).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The radio on spidev1.0 was listed as a bare "SPI radio" and reported
"MeshTerm SPI node", because spidev1.0 alone could be any Pi. A
uConsole now proves itself by its own screen: ClockworkPi's uConsole
overlay declares the panel `cw,cwu50`, which no other machine carries
(the DevTerm's is cw,cwd686; the CM's model string and the AXP228 and
backlight are shared). Seen on JP's CM5 uConsole.
`BuiltinRadio` takes a device-tree `compatible` beside its marker path,
read once a run from /sys/firmware/devicetree/base. The named AIO comes
first in BUILTIN_RADIOS; without the panel, the unnamed entry still
lists spidev1.0 on the AIO's wiring as before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Cardputer Zero's Cap carries a GPS on the header's UART, which the
device screen listed as "~ n/a" (pyserial's name for a port with no USB
identity): a companion to connect to, and with nothing remembered, the
lone port a command-line connect would pick. A wiring now names its
board's GPS (`gps_port`, `gps_baud`; the Cap's is /dev/serial0 at
115200), and wherever that radio is listed, its GPS port is not: the
device screen, `meshterm devices`, and autodetect.
The radio node reads it the way MeshCore companion firmware reads a
board's GPS: `gps` (off until switched on, remembered in prefs.json)
and `gps_interval` (0, every fix, once a second), reported and set as
custom variables, which is where Device config already shows them. A
valid RMC or GGA fix becomes the node's position, the one its
self-info reports and, with Share location on, its adverts carry. The
last fix is saved as the node shuts down. Standard library only, as
the node's contract asks; NMEA checksums are checked.
On MeshTerm's side, our own self-info is now refreshed behind the
answer after a minute, like the contacts, so screens opened after the
node moves show where it is; and the connect-time settings offer no
longer flags a position the running GPS moved.
Checked on the Cardputer: the ttyS0 row is gone from `meshterm
devices`; `config custom gps 1` opens the port, is saved, and reads
back on; the real-terminal test passes there.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On the device MeshTerm ran, drew every frame, and stayed invisible: the
panel kept the launcher's last frame while a splash nobody could see
waited for a key. The panel is a DRM driver whose /dev/fb0 is fbdev
emulation, and the kernel copies to the glass only what it sees change
through the *mapping*. pwrite() put the pixels in the buffer, where
reading /dev/fb0 back showed them, and never on the panel. The frame
now goes through an mmap, as M5's own LVGL apps write theirs. Checked
on the panel.
Also scripts/cardputer-zero/type-text.py: paste a long string (an API
key, a Wi-Fi password) on another computer and it is typed on the
Cardputer's keyboard over SSH, into whatever app has the screen. Input
is hidden and travels on stdin, never on a command line.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tried on a real Cardputer Zero for the first time. It draws on the
panel, takes the keyboard, and opens from M5's app launcher:
scripts/cardputer-zero/launcher-entry.sh puts a source checkout there
(and `remove` takes it off) until there is a store package.
Three things the hardware showed:
- The splash opened with the highlight on /dev/ttyS0, the Cap's GPS
UART, because serial is listed first as found. Below the companions
we've used, anything that looks like one now comes before a port
nothing vouches for, across transports.
- The title bar's battery is the handheld's own BQ27220, as the
PicoCalc's is. The host pack is now found by what it is (a Battery
supply that isn't a peripheral's), not by the PicoCalc's name.
- While the Cap is powered, I2C bus 1 turns noisy: a quarter to three
quarters of the gauge's reads fail with an I/O error (one in ten of
the clock's), none with the header off. A failed read is asked again,
a status that won't read keeps its last verdict, and a good reading
stands through six failed polls instead of blinking out.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On a Cardputer Zero the device screen lists the Cap as "Cap LoRa-1262",
and --spi reaches it, with no profile: its wiring ships beside the
AIO's, listed when the board's own ext_5v_out switch says this is a
Cardputer Zero (spidev0.1 alone would claim every Pi with SPI on).
The Cap needs two things before the chip answers, and the wiring can
now say both. `leds` sets the switches the device tree hands to
gpio-leds — ext_5v_out powers the header, ext_usb_gpio_fun=0 keeps
the reset and interrupt pins on GPIO rather than USB — and puts them
back when the node ends, so the header is unpowered again after
MeshTerm quits. `pi4io_*` drives the Cap's PI4IOE5V6408 at 0x43, which
enables the RF path; a silent expander is reported as the Cap not
being attached.
Checked on the hardware: reset 26, busy 22, irq 23 on spidev0.1 (the
lines M5's factory test drives), the node comes up from a cold
header, and it hears the mesh at +12 dB.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Joining a room moves out of Chat into a Rooms page beside Channels. It
lists every room server the radio knows, joined ones first, with each
room's access, unread count, last post and last-heard time. Each room
has a page: join, log in again, change password, open the board, forget
it, or delete its stored posts. Chat now lists only joined rooms, the way
it lists only channels on a slot, and only a joined room raises the
unread badge. chat join becomes rooms join, alongside rooms list and
rooms forget.
"No reply" told the reader nothing, because a room is just as silent for
a wrong password as for a login that never reached it. Testing on
hardware showed the commonest cause is neither: a login sent along the
route the radio had learned met silence, and the same login by flood was
accepted in eleven seconds. A silent login is now explained from what is
known: how it went out, when the room was last heard, and whether this
password has worked before. It offers the one next step that evidence
points at:
- Try by flood, after a learned route met silence. The radio forgets
the route (local, nothing transmitted), then sends the login once.
- Try again…, after a flood met silence. The prompt reopens with the
password filled in, so Enter resends it and typing replaces it.
- Add it & try again, when the radio doesn't hold the room as a contact.
Every retry is a button press, and none is ever sent on its own. A
password over 15 bytes is refused at the prompt, since MeshCore sends
only the first 15.
On the board, a failed or unfinished login used to leave the compose
line taking posts the room would drop. It now opens only while we are in
and may post, and otherwise says why and what to press. Opening a joined
room that has gone quiet logs in in the background. ^L runs the
explained flow.
Underneath, the login exchange listens for the radio's own confirmation,
matched to the login by its expected ack. It records whether the login
went by flood or along a route, or the radio's reason for not sending it
at all. This also corrects the debug log: "send unacknowledged" read the
library's wait for the *answer* as the send. On hardware the radio
confirms in under 0.1 s. Device.reset_route is new. The simulator learns
routes, can be given a stale one, and refloods.
Refs: #24
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
chat join logs in to a room server and prints what it allowed: member,
admin or read-only. It uses --password, or the password MeshTerm
remembers for the room. A room says nothing to a wrong password, so a
join that hears nothing fails (exit 4) and names both possible reasons.
send --to a room posts to it, and its receipt says kind "room". A room's
history names each post's author where a direct transcript names the
peer, drawn the way a route draws a hop: "Alice (d4e5f6a7)", or the bare
hash when nothing names the key. The document carries the author on
every row, null outside a room, so history answers in one shape for
every kind of conversation; listen streams it too. chat list calls a
room a room.
The CLI manual, the features guide and the README describe rooms, and
CLAUDE.md adds room and post to the lexicon, 📌 to the icons, and ^L to
the chord list.
Refs: #24
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A click on one of the Cardputer Zero's keys drawn under the panel, or on a
chip of the lane along the panel's bottom row, types that slot's key. The
PicoCalc has no keys drawn, so its chips are where you click. Shift held
through the click types the slot's Shift companion. The app reads the bank
off the key that arrives, not off the Shift it saw, so the window spells the
shifted key itself, the way the desktop's Shift+F-key already was: F6 to F10
on the PicoCalc, xterm's shifted F4 to F8 on the Cardputer.
The drawn keys take the lane's own fills, resolved from the deck's styles
through the panel's palette, so a key and the chip above it are one colour.
They turn blue with the lane while Shift is down, and fill solid while
pressed. Losing focus lets go of Shift, which a release in another window
never would.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The September messages reached the device picker and the command line, but
three other places still lost them. The reconnect dialog retried every
failure in silence, so a device that came back and refused (its port taken
by the MeshCore app, a stale pairing) kept the spinner up forever; from the
second failure in a row it now shows the reason under the spinner, and goes
back to waiting if the device is unplugged again. A device named on the
command line skipped the picker, and a failed start was dropped unlogged; it
is now shown before the menu opens. And a failed open left the dead device
behind, so is_connected said yes and every later tool failed with "not
connected": it is dropped, and the next tool tries again and says why.
TCP failures are named one by one (host not found, nothing on the port, no
route, no answer, hung up) instead of all reading "no response from a
MeshCore companion". A failure MeshTerm has no name for is no longer called
"not a MeshCore device": it is said in its own words, its traceback is
logged once, and the dialog says where the log file is. The tool-failure
dialog stops reading an error's brackets as markup, which had silently
deleted "[org.bluez.Error.Failed]" from Linux Bluetooth errors.
docs/guide/connecting.md lists the TCP messages and where each message
appears.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`meshterm emulate cardputer-zero --mock` and `meshterm emulate picocalc-lyra --mock`
open a desktop window drawing MeshTerm as that device's own screen draws it. An
EmulatedDevice (emulator/devices.py) holds what differs per handheld: the panel, a
Linux console's top-left grid and bold-as-bright 4-bit palette for the PicoCalc, the
lane keys drawn under the Cardputer's panel, and how each keyboard spells Shift with
an F-key (the PicoCalc's F6-F10, the Cardputer's xterm-shifted F4-F8).
It is not a strict emulator, and the docs say so wherever they offer it: MeshTerm runs
on the desktop as itself, and the window mimics the display's and keyboard's
constraints, never the CPU or the OS. Inside it the platform resolves with own_display
(platforms.drawn_by_meshterm), so nothing offers to move to another terminal.
Global options typed anywhere (--mock, --port, --db...) reach the emulated MeshTerm.
The command refuses --json like specimen. The Terminus fetch moved into the package as
`meshterm emulate --fetch-fonts` (with --archive for a copy fetched another way),
replacing scripts/cardputer-zero/fetch-terminus.py. A build without Tk says to install
with pip or pipx instead of failing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
"Host" already meant two things here: a TCP companion's network host,
and battery="host" for this machine itself. And with a PicoCalc preview
coming, the package is less a console host than an emulator of a
handheld's display: its panel, grid, font, colours and keys. So it is
meshterm.emulator, Platform.console_host is own_display, its desktop
window is window.py (EmulatorWindow) and its device front end
framebuffer.py, since "sim" and "device" now mean the radio simulator and
the device being emulated. MESHTERM_HOST_FONTS is MESHTERM_EMULATOR_FONTS.
The package's own description opens on what it is not: nothing runs the
handheld's processor or operating system; it mimics the display's
constraints so the window obeys the device's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
M5Stack makes three Cardputers and only the Zero runs Linux; the PicoCalc
takes several cores and only the Luckfox Lyra runs MeshTerm. So the bare
names were ambiguous, and every reference to the two devices now carries
the variant: the --platform values and MESHTERM_PLATFORM, the Platform
constants (PICOCALC_LYRA, CARDPUTER_ZERO), their lane decks and every
screen's picocalc_lyra_lane / cardputer_zero_lane, the font inventories,
the lane chips' theme styles, the scripts/ folders, the two chrome test
files, and the docs and CLAUDE.md that name them.
There is no alias: --platform picocalc is refused with the three real
choices listed, rather than falling back to the desktop layout. The
PicoCalc is auto-detected from its device tree, so it needs nothing.
What names hardware or a user's data keeps its name: the PicoCalc
keyboard's input-device name, its battery's sysfs supply, and the serial
profile the Lyra setup script writes. .gitignore follows the firmware's
folder, and the changelog keeps the words each release used.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/ was one flat folder: the user guides, the CLI manual, the device
manuals, the code notes and an old survey side by side. It is now
guide/ (features, configuration, connecting, terminals), cli/ (the
manual as its README, the cookbook), devices/ (which manual is yours
as its README, then one per device) and development/ (architecture,
the survey); screenshots/ stays put. The index follows the folders.
The device manuals are named for the device they are about: the
PicoCalc's is picocalc-lyra.md, since MeshTerm runs on the PicoCalc's
Luckfox Lyra core and on none of the others, and the uConsole's stays
uconsole.md, since its CM4 and CM5 run it alike. A new cardputer-zero.md
opens on a warning that the device is not supported yet, says what has
been built and tested only in the simulator, and how to try it there.
Every relative link was resolved from where it was written and rewritten
from where it now lives, and the repo-root spellings in code, config and
the release skill moved with them; the changelog's GitHub URLs too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The AIO's pins sit on whichever /dev/gpiochip carries the Raspberry Pi's
40-pin header, and that number is no fact about the board: chip 0 on a
uConsole's CM4, chip 4 on a CM5 under its early kernels, chip 0 once
Raspberry Pi aliased the RP1 there, and another number again on some
later kernels. gpio_chip now defaults to -1, which asks each chip for its
label and takes the one called pinctrl-rp1, pinctrl-bcm2711 or
pinctrl-bcm2835, falling back to chip 0 where none is; a number in the
profile still pins it. The chip is settled once before the node starts,
so the node, every error and the lsof hint all name the same one.
The uConsole guide says CM4 and CM5 both work, that ClockworkPi's own
A-04, A-06 and R-01 cores are not supported, and explains which chip and
why; config.example.toml and the configuration guide say the same, and
the guide's test record now names the CM5 it has run on since 09-24.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Three pull requests against toy issues arrived from agents that farm open
issues for contribution stats. None had said a word to the project, and
none disclosed that AI wrote them.
CONTRIBUTING.md now says, in plain words, how MeshTerm was made and who
it wants: people who use it, AI-assisted or not. Before writing code, a
contributor says hello in the new #contributing channel on Discord and
waits for a yes; the pull request carries their Discord username and a
link to that yes. AI use has to be disclosed in the commits and the pull
request; undisclosed or unattended agent output is closed without review.
The PR template, the README's two notes on pull requests, and the docs
index all said small fixes could skip the conversation, and now match.
The release skill's commit carries the AI trailer its seven release
commits went out without.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
