rich/MeshTerm

0 Fork 0

Files

T

Jean-Pierre MartineauandClaude Opus 5.5 3333201df8 MeshTerm starts from the Cardputer Zero's launcher, on its own battery

Tried on a real Cardputer Zero for the first time. It draws on the
panel, takes the keyboard, and opens from M5's app launcher:
scripts/cardputer-zero/launcher-entry.sh puts a source checkout there
(and `remove` takes it off) until there is a store package.

Three things the hardware showed:

- The splash opened with the highlight on /dev/ttyS0, the Cap's GPS
  UART, because serial is listed first as found. Below the companions
  we've used, anything that looks like one now comes before a port
  nothing vouches for, across transports.
- The title bar's battery is the handheld's own BQ27220, as the
  PicoCalc's is. The host pack is now found by what it is (a Battery
  supply that isn't a peripheral's), not by the PicoCalc's name.
- While the Cap is powered, I2C bus 1 turns noisy: a quarter to three
  quarters of the gauge's reads fail with an I/O error (one in ten of
  the clock's), none with the header off. A failed read is asked again,
  a status that won't read keeps its last verdict, and a good reading
  stands through six failed polls instead of blinking out.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

2026-10-05 16:00:13 -04:00

cli

Rooms get their own page, and a room that doesn't answer is explained

2026-10-05 02:07:10 -04:00

development

The docs are in folders, and the Cardputer Zero has a page

2026-10-04 11:42:51 -04:00

devices

MeshTerm starts from the Cardputer Zero's launcher, on its own battery

2026-10-05 16:00:13 -04:00

guide

The Cardputer Zero's Cap LoRa-1262 works with no setup

2026-10-05 15:29:40 -04:00

screenshots

The README shows the five screenshots, the PicoCalc on its own under the four captures

2026-09-13 18:31:04 -04:00

README.md

meshterm emulate shows either handheld's display in a window

2026-10-04 14:19:22 -04:00

README.md

MeshTerm documentation

Everything that didn't belong on the front page. The README is the front door — what MeshTerm is, how to install it, and enough to get a first session running. This folder is the rest, in four parts:

Folder	What's in it
`guide/`	Using MeshTerm: what each screen does, configuring it, connecting a companion, terminals.
`cli/`	The command line manual, and a cookbook of one-liners.
`devices/`	Running MeshTerm on a handheld's own screen, one manual per device.
`development/`	How the code is laid out, and a historical survey.

Using MeshTerm

Read	For
What MeshTerm does	Every screen the menu offers, grouped the way the menu groups them, with the command that does the same job without it.
Configuring MeshTerm	Preferences versus config, device profiles, and everything kept under `~/.meshterm`.
When a companion won't connect	Bluetooth pairing on each system, finding the PIN, and every connection error MeshTerm reports, with what to do about it.
Terminals, icons, and the Windows console	Why the icons and charts draw on some terminals and not others, and what MeshTerm does about it on Windows.

The command line

Read	For
The command line	The manual. Every subcommand and option, what each prints on the plain and JSON faces, the exit statuses, and recipes built on `jq`.
The CLI cookbook	Common one-liners by task, for when you want the shape of a command rather than its specification.

Running it on a handheld

Only if you want MeshTerm running on a handheld's own screen. A MeshCore companion on USB, Bluetooth, or Wi-Fi needs none of this.

Read	For
MeshTerm on hardware	Start here — which manual below is yours, and what the device-side scripts do.
MeshTerm on the PicoCalc	A stock ClockworkPi PicoCalc to a Linux handheld with a LoRa radio soldered inside: the shopping list, the swap to a Luckfox Lyra core, Calculinux, and the radio.
MeshTerm on the uConsole	A uConsole (CM4 or CM5) with the hackergadgets AIO LoRa board, whose SX1262 sits on the computer's own SPI bus — MeshTerm drives it directly with `--spi`, or a small bridge fronts it as a companion for an always-on node.
MeshTerm on the Cardputer Zero	⚠️ Not supported yet. What exists for M5Stack's Linux Cardputer, and how to try it in the desktop emulator.

Reading the code

Read	For
How the code is laid out	The layering, and where a new feature goes.
CLAUDE.md	The actual style guide — terminology, UX standards, and the reusable building blocks. Written for AI assistants, and the house rules for everyone.
CONTRIBUTING.md	How to propose a change, the rules on AI use, the dev install, the three checks a change must pass, and what happens to your contribution's licensing.

Historical record

A survey of the code, kept because a project that writes down its own problems is easier to trust than one that doesn't — but it is a snapshot of a date, not a to-do list. Some of what it describes has been fixed since, and it does not mark which.

Read	For
UI consistency survey	Everything else in the CLAUDE.md UX standard — six sweeps found nothing, which is the useful part.

Also here

screenshots/ holds the captures the README shows and the ones meshterm.net builds its landing page from, so a file in there is referenced from more than one place.