records --width now refuses anything but 1, 2, or 4 with a usage error, the
way --category already refused an unknown discipline. A width that doesn't
exist used to come back as exit 5, indistinguishable from an empty database,
and --width 0 was falsy and so listed every width. (#15)
A device with no port is labelled by its name alone. The simulator fell
through to the serial branch and came out as "… (nothing transmits) ()". (#14)
platform and specimen pass their own one-line help, so Typer stops printing
their docstrings — notes for whoever reads cli.py, Sphinx roles and source
paths included — and their summaries fit in meshterm --help. A new test runs
--help on every registered command and refuses those markers anywhere. (#16)
Built from the issues alone; the pull requests filed against them were
closed unreviewed and their code was never read.
Closes#14, closes#15, closes#16.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every list of three or more takes the serial comma: the one-liner in
pyproject.toml, meshterm/__init__.py, and --help ("USB, Bluetooth, or TCP",
"Windows, macOS, and Linux"), the README, the changelog, the manuals, the
issue and PR templates, and six strings the app shows (the region-name
rule, a repeater setting's help, the diagnostics tool's description, and
the archive confirms). The Windows-console notice is rewrapped so its
comma keeps it inside 72 columns.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A new page, docs/connecting.md, collects every connection failure MeshTerm
reports, with its cause and remedy: who pairs a Bluetooth companion on each
system (MeshTerm on Windows and Linux, macOS's own dialog there, where
--ble-pin does nothing), the terminal's Bluetooth permission on macOS and
its refusal over SSH, reading a screenless companion's PIN over USB,
forgetting a pairing on each system, and the dialout group and ModemManager
for USB on Linux. The README, the docs index, hardware.md, and the CLI
manual's failure section link to it, and --ble-pin says it has no effect
on macOS. The CLI manual's no-radio example shows today's message.
The changelog covers the Linux Bluetooth pairing and link fixes and the
per-step failure messages. configuration.md shows db_path, and a few lists
gain their Oxford comma, WiFi becomes Wi-Fi, and "never-before-seen"
becomes "heard for the first time".
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeshCore firmware sets its clock only forward: CMD_SET_DEVICE_TIME with an earlier time is answered ERR_CODE_ILLEGAL_ARG, which read as 'the device rejected the request as malformed'. Since 2026-09-24 the companion's clock has been ahead of this computer's (itself within 0.7 s of NTP), so every connect's sync was refused. set_clock now reads the radio's clock first: within a minute ahead is in sync and nothing is written; further ahead raises ClockAheadError, which says by how much and that a reboot resets it. The device layer also maps the firmware's refusal to that error, and the simulator's clock now only moves forward, like the firmware's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Measured against a T1000-E from a uConsole (BlueZ 5.66, btmon on the side).
A connect that BlueZ had to retry stranded its link. bleak retries a link
attempt that failed to synchronise (le-connection-abort-by-local, 3-7 per
connect on a Pi radio) inside connect(), and each one fired meshcore's
disconnect handler, which resets BLEConnection.client to None. bleak's
next retry then connected a client nobody held, meshcore gave up as "not
established", and the live link kept the companion from advertising, so
the retry scanned for 30 s and reported it out of range. Three runs out of
three. While connect() runs, a disconnect is now only recorded, and the
teardown keeps the last live client if meshcore let go of it anyway.
A companion given a PIN after it was paired unauthenticated answers the
subscribe with ATT 0x0E, Unlikely Error (bond Authenticated=0). That is now
read as a pairing refusal, so the stale-bond message and the PIN repair
reach it; with the PIN it re-paired and connected.
BlueZ's Pair left its link up (the companion then stopped advertising to
the connect), and failed at once on the same link flake bleak retries. It
now puts the link down after pairing and retries a flake a bounded 4 times.
And BlueZ starts a pairing of its own when the subscribe is refused, asking
the default agent; with none (any headless machine) it waited on a yes/no
until the companion's 30 s SMP timeout. For the length of a connect
MeshTerm is now the default agent for that one device, KeyboardOnly: with a
PIN it answers, without one it refuses at once, and it never approves a
pairing without the passkey, which is how a bond ends up weak.
Unpaired, no PIN: 33 s -> 4 s to "requires a PIN". Unpaired with the PIN:
paired and connected in 11 s. Paired: connects in 7 s, where it failed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On Linux the PIN never reached the radio: bleak's BlueZ pair() calls
Device1.Pair and nothing else, BlueZ asks a pairing agent for the passkey,
and bleak registers none. Without a desktop agent BlueZ falls back to Just
Works, the firmware refuses a bond without MITM, and the picker looped on
"That PIN was rejected" for a correct PIN. MeshTerm now registers its own
Agent1 for the length of one pairing (core/bluez.py) and calls Pair from
the same bus connection, so BlueZ routes the passkey request to it and
never to the desktop's agent. The Windows repair contract carries over:
an existing bond is reused, force removes it and pairs afresh, and the
outcome is recorded so a refusal names it. Unpair & quit and the stale-
bond message work on Linux too, and the remedies there name Linux and
`bluetoothctl remove` instead of Windows' Settings. bleak no longer gets
the PIN on Linux, where it could only start a second pairing.
A serial port that refuses to open was reported as "didn't answer as a
MeshCore device", with nothing logged. Permission denied now names the
dialout group, a held port names the other program (and ModemManager on
Linux, also named when the port opens but never answers), and a vanished
port says so. A failed startup probe is logged at warning.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
One "requires a PIN" sentence covered every GATT refusal, and a link that
never opened read as "didn't answer as a MeshCore device". A Heltec V4 user
whose Windows bond had gone stale was told to pair a device Settings showed
as paired. Each failure point now has its own message and remedy: link never
opened, stale Windows bond, wrong PIN, device refused to pair (with the
WinRT status), paired but still refused, a BLE probe timeout by stage, and
link up but no identity reply. The PIN dialog shows the diagnosis instead of
calling every refusal a rejected PIN, and each case is logged at warning so
a log sent in from another machine names it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Both labels were right-aligned over their numbers, so each ended
mid-value with the unit trailing past it; every other label on the row
starts at its lane's left edge. RSSI also borrowed the SNR's five-cell
field for a reading never wider than four (-120), which set the two
readings three or four cells apart instead of the row's usual two.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
dir messg, chan text, chan data and anon req replace direct message, channel text, channel data and anon request, so the longest class (telemetry, chan text, multipart) is 9 cells and the live feed's class lane gives 5 of its 14 back to the row. The dashboard's traffic tallies and the viewer's headline read the same names from the same table.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The class name was dropped below the width the whole row needed, leaving only its icon. It is now drawn at every width, like the scope; a row wider than the screen is read by scrolling the highlighted one with ←→. The class icon beside the name is a family cue once the name is always there, so it follows Platform.menu_icons: on the PicoCalc, where it could only be a one-glyph stand-in, the lane is gone.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
reset_flood_scope and force_unscoped arrived late in meshcore 2.3.x. The uConsole's 2.3.7 satisfies meshcore>=2.3 without them, so every scoped channel send would have crashed on restoring the scope. set_flood_scope now sends the firmware's command 54 itself ([54][0][key], [54][0], [54][1]), as the default scope's command 63 already was. Every other library call MeshTerm makes exists in 2.3.7.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The radio hands a message over as text, not as the frame it rode in, so a 💬 row opened from the live feed had no scope to show. Its card now finds the message's flooded copies in the packet log, the way the message paths dialog does, and reads the scope off them into a scope row. The copies found are kept per row; the region is resolved on every paint, so a name learned while the card is open names it. Direct messages get no row: their copies are encrypted end to end, and a routed one has no scope.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The firmware parks its home mark on the wildcard when no region is home, so *^ means no home region set. The wildcard row's note now reads 'unscoped · no home' then, and 'unscoped floods' once a region is home.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With a message picked, ^R (the Resend chip on the PicoCalc) offers that one: a scoped message of ours is resent unscoped, and a pick that isn't one offers nothing rather than reaching past it to another. With nothing picked it is still the newest. The pick clears once the resend lands at the tail, and the picked-row hint names ^R when it would act.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
It came and went with the terminal's width: hidden between 70 and 83 columns, where the class label won, and always on the PicoCalc. It is now drawn at every width, and the class label is what gives way on a narrow screen, the icon still saying what the packet is. Beside the subject, the lane is on screen even at 53 columns; there it is the readings after it that scroll off.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The region rode the route row as a trailing atom (flood · scope harbour), easy to miss on a card opened from the feed's SCOPE lane to see it. Route now says how the packet was routed (flood, direct) and a labelled scope row underneath says where: the region, 'unknown region · code 3fa1', or 'unscoped'. A direct packet has no scope row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The chat title reads "#devtest · onqc" rather than "#devtest · scope onqc". `channels scope N` on a channel with no scope prints - (null in --json) and exits 0: sending under the device default is an answer. Only an empty slot still exits 5.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
SCOPE moves ahead of the SNR and RSSI readings, since where a flood was allowed to go is a fact about the packet like its subject; the readings are about how it reached us. A plain flood draws a muted dash instead of the word, so the lane is quiet until a row is scoped, and the lane narrows to 10 cells. The Channels list's column test rides along.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The menu's This node / Other nodes / This app sections were called scopes; they now name whose a setting is, and scope is left to a flood's region alone. CLAUDE.md's lexicon says so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The meshcore library does not serialize commands, and every command
waiting for "OK or ERROR" takes the first ERROR to arrive. At connect the
channel prewarm runs beside the clock sync, which this companion refuses
as malformed; a slot read handed that refusal took it for "no such slot",
ended the probe there, and cached a list missing every channel after it
for the rest of the session.
Only the firmware's NOT_FOUND (or a code-less refusal from old firmware)
now ends the list. Any other refusal is asked again once, and a second
one, or no answer at all, is a failed read the probe reports as
unfinished and does not cache.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The region each channel's messages are flooded into, blank for one that
sends under the device default. The lane is only as wide as the longest
scope, and shares a budget with the name lane so that at 72 columns it
never cuts the activity sparkline: with a name at its ceiling it gets
eight cells, what the row had spare. On the PicoCalc the row was already
cut inside the activity lane, so there it costs the LAST ages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On Windows, Click expands any argument holding `*` into the files it
matches, quoted or not, so `chat send --scope '*'` arrived as the working
directory's file names. The entry point turns the expansion off; nothing
MeshTerm takes is a glob.
`channels scope N REGION` on an empty slot did nothing and exited 5, which
tells a script the scope was set and read back empty. A write there is
now a usage error; a read still exits 5, as `share` does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
"scoped · 3fa1" put a `·` inside the reading, so in the message paths
title it chained as two status atoms. It is now "unknown scope 3fa1",
and "? 3fa1" in the live feed's SCOPE lane, whose heading already says
what the column holds.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The node page of a repeater shows the regions it was last heard to relay
floods for, whether it relays unscoped floods too, and when it said so, and
asks it once on request. The region store keeps that unscoped flag and the
answer's time beside the regions.
Repeater admin gains a Regions page: the region tree read over the remote
CLI (core/region_admin.py parses the dump, drops a line the 160-byte reply
cut in half, and recovers the rest from the flat lists), flood allowed or
denied per region and for the wildcard, home, default scope, add, remove
and save. Each edit is one command applied at once; the title counts what
a reboot would undo. meshterm regions NODE asks from the command line.
The simulator transcribes the firmware's region CLI, reply cap included.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The firmware has no per-channel scope, so a channel send is now a window
on the companion's session scope: set it, send, restore it, under a
transmit lock every flood-capable send also takes (DMs, adverts, admin
commands, logins, regions/neighbour requests), so nothing interleaves.
Ack waits stay outside the lock. A scope the radio can't take stops the
message (FloodScopeError naming the firmware it needs) rather than sending
it unscoped or under the default; * checks the firmware version, since
before 1.16 the override would quietly fall back to the default scope.
A failed restore is repaired by the next transmission.
Channel scopes are set from the channel page's Send scope picker (known
regions with their carriers, or a typed name) and from the CLI (channels
scope, chat send --scope). The chat's title carries the scope as a status
atom, ^R/Resend sends the newest scoped message again unscoped after an
amber confirm, and the scope each sent message went under is recorded
(messages.scope, schema v17) so the paths dialog can say what it went
under and when no known repeater carries that region. Device config now
teaches the region store the default scope it reads or sets.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The packet viewer's route row reads "flood · scope harbour" (or
"scoped · 3fa1" for a region nobody here has named, or "unscoped")
instead of the library's bare "tc flood"; a direct frame keeps its
route word and states no scope. The live feed gains a SCOPE lane where
the width holds it, 72 columns included (the subject lends it one
cell); the PicoCalc's row already scrolls at 53 and leaves the scope to
the viewer. The message paths dialog states a message's scope once, as
a title atom, read off its arrivals' frames. monitor streams a SCOPE
lane before NAME, and the scope object (or null) under --json.
The viewer and the feed take the region store's scope_of by injection,
falling back to reading the frame alone, and the viewer's card cache
keys on the scope so a region learned while it is open renames it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The groundwork for region scopes. core/regions.py holds the firmware's
maths (key = SHA-256("#"+name)[:16] over UTF-8, code = HMAC over type byte
+ payload with the reserved values stepped off) and the Scope reading of a
received frame. core/region_store.py keeps the regions known by name,
which repeaters carry them, and each channel's send scope, and memoizes
resolution. Observations gain transport_code and scope_body (schema v16)
so a scoped frame resolves against a name learned after it was heard.
Device gains set_flood_scope (the session override, * forcing unscoped)
and request_regions (the anonymous REGIONS request). The default scope
is now framed by MeshTerm: the library stored it with a # the firmware
and apps leave off, and padded by characters rather than bytes.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
--spi used to take whichever SPI profile config.toml listed first, a
coin toss that transmits once two radios are configured. It now counts
the radios actually attached: exactly one is used whether or not a
profile names it, which keeps the common single-radio case to a bare
--spi. Two attached, or two SPI profiles with nothing attached to count,
is a selection error (exit 3) that lists them and asks for -p, the same
way several serial devices with no default already are.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The device screen listed an SPI radio but the CLI inventory didn't, so
the one command for "what is attached?" was silent about it. The listing
moves into spiradio.spi_radios, which both now use, so the two can never
disagree; the row is marked active under --spi or an SPI profile.
resolve_spi becomes public for that.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeshCore transmits a 32-symbol preamble up to SF8 (16 above), but the
node and the bridge configured the SX1262 for the library's fixed 12.
The chip waits for the sync word only about as long as the preamble it
expects, so it locked onto each packet, gave up, and locked on again
further along the same preamble - decoding a packet only when it
happened to catch the tail. On the uConsole that meant 0 of 5 detected
packets decoded after a send; with 32 symbols, 4 of 4.
The node now derives the preamble from the spreading factor as MeshCore
does, and re-sends it to the listening chip when Device config changes
the SF. preamble_length leaves the SPI wiring table (it was protocol,
never wiring) and is retired; the bridge defaults to the same rule.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A LoRa chip on the host's own SPI bus (the uConsole AIO) is now a
transport like serial, BLE, and TCP: --spi, an SPI profile, or the
picker's row for /dev/spidev1.0. MeshTerm starts a software node as a
child process under whichever Python has openhop-core, talks to it over
a loopback port, and ends it on disconnect; the node also exits with its
parent, so the pins are free whenever MeshTerm is not running.
The node keeps identity, prefs, channels, and contacts under
~/.meshterm/radio/<spidev>/, and on first use copies the bridge's
identity, contacts, and radio settings so it stays the same node.
Board wiring lives in a profile's spi table; radio settings are the
node's own, edited on Device config. Closes#21.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A muted line under the Weekly advert row on the Preferences page, set in
the value lane: "next advert in 4d" while the week runs, "due — waiting
for a packet" and then "due — after 30 s of quiet" once it is due, "no
device connected", and "the week starts on Apply" while it is only staged
on. The line is a width-aware separator that reads the scheduler's new
status() on every paint, from state the loop already keeps, so it follows
the wait live without touching the file. It is drawn, even blank, for as
long as the preference is on, so the rows below never shift; every message
fits the PicoCalc's 53 columns, and a gallery specimen holds it there.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The admin and remote stores round-tripped the raw JSON they read, so any
field a past version wrote survived forever. Both now read into typed
records (AdminCredential; _RemoteNode holding CachedValue settings) and
write out of them, keeping the file's existing spelling. The settings store
keeps only keys device_config still registers: it offers remembered values
back to the radio, so an unregistered key must not reach a restore.
Every persisted record now declares a RETIRED set (all empty: the history
holds no removed fields), device_config gains its own RETIRED registry, and
test_retired pins each store's records so the sweep cannot go vacuous.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A value can outlive its key in a file nobody saved since; if the name came
back with a new meaning, an old value that passes the new spec would load
cleanly and mean something else. So every name that leaves is recorded as
retired: preference keys in preferences.RETIRED (the two old advert cadence
keys), stored fields in their record dataclass's own RETIRED set. A test
walks meshterm.core for such records and fails any live name found retired.
Loading preferences refuses retired keys and records every drop (retired,
unknown, invalid); report_dropped logs them once logging exists, INFO for a
retired key and WARNING naming a typo. adverts.json now reads into typed
records and writes out of them, so unknown fields die at the next write.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A MeshCore companion never advertises by itself, so the hourly zero-hop and
daily flood adverts MeshTerm sent by default were the only automatic adverts
on the air, and more than a companion needs. The Background adverts rows leave
Device config and `config advert-cadence` goes with them.
In their place, two preferences under Sending: weekly_flood_advert (off by
default) and advert_quiet_s (5/15/30/60 s, default 30). Each device keeps its
own real-time week, running from the latest of the switch-on, its last flood
advert (automatic or by hand), and its first connection; a due advert survives
a restart. Before sending, each connection must hear a packet, then the air
must stay quiet (nothing heard, nothing of ours sent) for the spell plus a
random 0-5 s, drawn afresh at every break so two waiting radios part.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
0.9.0 called the same advert type three things: `companion` in info, `client` in
diagnostics, and `node` in contacts and every other screen that names a node's type.
Room servers were `room server` in two places and `room` in the rest. JP picked
companion. It is the ecosystem's word -- companion firmware, companion apps -- and the
one MeshTerm's own docs already used most. "client" now belongs to MeshTerm itself, which
the one-liner calls a MeshCore client, and "node" is the lexicon's umbrella for every type,
so a TYPE column that says "node" for one of them tells a reader nothing.
There is now one table, NODE_TYPE_LABELS, and one helper, node_type_label(), which gives
"type N" for an advert type MeshTerm does not know. info and diagnostics lose the two
role tables that had drifted apart, and the packet viewer its own copy of the fallback.
The longer names made the node-type legend 59 cells wide, which the PicoCalc's 53 would
have cropped, cutting "sensor" off. node_type_legend() now takes the width it has and
breaks between entries, never inside one, so it stays on one line on a desktop and takes
two on the PicoCalc. The four screens that draw it pass their width and take its lines.
This changes --json output, so it goes under [Unreleased] for 0.9.1. docs/cli.md's samples,
the value lists and CLAUDE.md's lexicon say companion and room server. Two tests pin the
names and the PicoCalc legend.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four different one-liners were in circulation: the repository's "interactive, scriptable
CLI toolkit", the README's "full-screen terminal companion", the About page's "client that
lives in your terminal", and the package summary's "TUI-based client ... companion
connection". JP picked one:
A full-featured TUI MeshCore client for your terminal
It now opens the README, the About page, the package summary, meshterm.__doc__ and the
`meshterm --help` header, which cli.py already says must stay the same as the summary.
The summary's second sentence loses its grammar slip on the way: "Connects to a companion
over USB, Bluetooth or TCP." CLAUDE.md opens with the same line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
About, Author and Support are drawn in the app and copied onto meshterm.net word for word,
so a typo in them is published twice. Fixed: through, knows, built, spent, software,
mentioned, "want to pitch in", "more than welcome", a doubled "the", PayPal's capital P,
3.3 V and Wi-Fi.
A few sentences said something untrue. The radio is recorded while MeshTerm runs and is
connected, not from the moment the radio is switched on. One 18650 runs a PicoCalc and a
second roughly doubles it, as docs/picocalc.md says, where "two batteries, all day" had no
source. The maker is ClockworkPi, and the uConsole bridge serves the AIO v1 and v2. The
support page says repeaters, the mesh's own word, and names the Author page rather than
"the about pages". The AI sentence on the Author page had lost its object; it reads as
one sentence again.
Support opens with a whole sentence, because its first line becomes the page's meta
description on the site, and "MeshTerm is free." unfurled as three words. The licence URL
on About is printed once rather than twice.
The binary that shipped as 0.9.0 keeps the old text until 0.9.1; the site picks this up on
its next build.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The first public release. The version goes to 0.9.0 and the changelog carries one
entry, which the release job lifts verbatim as the release notes.
[Unreleased] had refilled since the last fold with one change -- --mock keeping its
invented mesh out of your real history. On a first release there is no previous
behaviour for it to have changed from, so it is folded into the entry's existing --mock
sentence, in that entry's voice, and [Unreleased] is empty again.
Reading the notes as a newcomer would, three claims were not true, and each was checked
against the running app rather than argued:
- `meshterm map` is not a command. It was the first example a stranger would type, and
it answers "No such command". The map is a picture, so it lives in the menu; the
example is `meshterm info` now.
- The Time Machine does not wind the map back. It is braille charts of recorded history
over a day, a week, a month or all of it -- no map in it at all.
- Only the PicoCalc gets the handheld layout. It is chosen solely by the device tree
reading "Luckfox Lyra"; the uConsole has no detection and runs the desktop layout on
its 1280x720 screen, which has the room for it.
The manual's three sample outputs move from 0.3.7 to 0.9.0 with it, so the version a
reader sees in docs/cli.md matches the one they downloaded.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2dbae7a went red on lint, and it was never ruff check -- that passed. It was
ruff format --check, on two files from the last few commits: a nested def with no blank
line above it in the session, and a sum() in test_logo that fits on one line once
joined. Both pure layout; neither touches a hand-aligned table, and ruff check stays
clean after, which is the thing this repository has been bitten by before.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The device rows pinned their fixed lanes and slid only the hardware model
underneath them. The reasoning was borrowed from the Trophy case, where the
rank, date and score always fit and only the walk overflows -- there the lanes
really are the reader's place in a long list, and sliding them off would cost
the row its identity to read something the columns already told you.
This list inverts that. On a narrow terminal it is the device name and the
address that get cut, so pinning them pinned the truncation in place: the one
thing the arrow keys could not reach was the text somebody most wanted to
finish reading. A name is not a landmark when it is the thing being elided.
So no lane is pinned, and the row slides whole. That needed the scroll to be
asked for outright, because what normally turns it on is a row pinning a head
block, and none of these do any more -- `hscroll` travels from the picker
through the splash surface to the list, the same path `live` took.
The test that covered the old behaviour is rewritten rather than removed. It
was a fair test of a decision that has changed, and the argument for the new
one belongs where the old one was.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`live` went onto `TuiSession.select_startup` and nowhere else, but the picker
calls the *surface* -- `ui.select_startup`, which delegates. So MeshTerm crashed
on the startup path with a `TypeError` about an unexpected keyword, on the first
screen, every time.
The whole test suite passed through it. Every fake Ui in `test_tui.py` takes
`**kwargs`, which is the reasonable thing for a double to do and is exactly what
hid this: the picker's new argument was absorbed by a stand-in that would accept
anything, while the real surface would accept nothing of the sort. Five tests
written specifically for the rescan ran green against code that could not start.
So the double stops being infinitely accommodating. The test added here binds
what the picker sends against the real `Ui.select_startup` signature, which
raises on an unknown keyword exactly where a running MeshTerm does. It fails
against this commit's parent and passes against this one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It scanned on the way in and never again, so a radio plugged in ten seconds
late was invisible until MeshTerm was restarted. The worst version of that is
the first run: the screen says no companion devices detected and offers a
network address typed by hand, or quitting. Going to fetch the cable is the
obvious thing to do and it was the one thing that did not work.
The three transports want three different answers, and the reason is cost.
Enumerating serial ports is a SetupAPI walk -- not free, but cheap enough to
repeat every couple of seconds off the event loop without anyone noticing, and
it covers the case this is really about. Bluetooth is a bounded listen, so
"keep scanning" there means keeping the radio listening for as long as the
splash is open, on the handhelds this program exists for, on a battery, on the
screen somebody leaves up while they walk away. It gets a window every fifteen
seconds instead, eight of them, and the count is ignored while the list is
still empty -- an empty splash is precisely where somebody is waiting, and
another listen is the cost of being useful. TCP is not scanned at all, because
it never was: a network companion does not advertise, and its rows are read
from the registry and the profiles, which change only when the reader changes
them.
Only a change redraws. A poll that finds the same ports says nothing, which
matters for somebody part-way through arrowing down the list: a redraw they did
not ask for, on a list that has not moved, is the screen shifting under their
hands for no reason. When it does redraw, `replace_items` keeps their place by
value rather than by index, so a device appearing above the highlight does not
carry the selection with it.
`select_startup` grew a `live` argument to make this possible -- work to do
while the list is on screen, handed a `redraw(items)` rather than the screen
itself, since a caller holding a screen could not repaint it anyway. It is
cancelled when the screen resolves, so nothing outlives the list it was
redrawing and no repaint lands on the PIN prompt or the smoke test that opens
over it.
Fixes: #13
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Moving brightness out of bold and into the `9N` bank settled what a span says
when it names a colour. It left unsettled what happens when a sequence changes
the intensity and names no colour at all -- which is exactly how the art
announces a bright run. `ESC[1m` had its `1` stripped, the brightness was
remembered for whichever later sequence happened to name a foreground, and the
colour already in force was never restated. The run carried on in the dim bank
wearing the `22` that had been forced in front of it.
The wide mark does this twenty times, and five more as `ESC[1;4Nm`, where the
background survived and the brightness did not. On screen it reads as pairs of
half-blocks that should fade dark into light both coming out dark, most visibly
in the run beside the copyright line.
So the standing foreground is tracked, and restated in whichever bank now
applies whenever the intensity changes without one being named. A reset takes
the standing colour with it, because it takes the terminal's too.
There were no tests over the art loader at all -- `test_theme16.py` covers the
theme's own bold-brightness rules, which is a different question -- so this adds
some. The per-sequence invariant is the one that matters: counting bright
emissions across a file proves nothing, because one `1m` brightens every later
sequence and the totals stay high while individual runs go missing (149 emitted
against 64 requested, in a file that was drawing the bug). Every `1m` that fires
with a colour standing has to leave a bright foreground behind, and now each one
is checked.
Fixes: #11
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`--mock` is a fake radio, not a fake MeshTerm: what it adverted was recorded to
`meshterm.db` like anything a real companion said, so its four invented contacts
turned up in the mesh walk, the dashboard and the map of the mesh actually being
run. A `--mock` run that names no database now records to
`<config_dir>/meshterm-mock.db`, created on first use.
`--db` still wins — where a run records and which radio it talks to are different
questions, so an explicit path is a precedence rule and not the usage error
`--mock --port` is. `$MESHTERM_HOME` remains the only thing that isolates a run
whole: the contact and channel caches, the outbox and the remembered devices are
untouched by this, and the docs say so where they used to warn that `--mock`
recorded into the real history.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
message_dialog draws the message it is handed and reads its spans to pick
a border tone, so a markup string reaches it unparsed: the reader saw a
literal [ok] and [/ok] around the checkmark, and a failed write would have
been framed in the success colour, since a plain string has no spans to
read a tone from. It is a styled Text now, the way every other caller
writes one.
Only the mark is styled. That is enough for the border to read the tone,
and it leaves the path in body ink where it stays legible -- which is what
the mark is for. The reason for the failure follows it muted, on its own
line.
The test asserts on the spans rather than on the words, because the bug
was invisible to anything reading the text: the tags were *in* the string
either way.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The block is a title, a standfirst, sections and a list under each. That
is a page of writing, not a screenful of rows, and the app already knows
how to draw one: the About pages' markdown renderer. So the tool states
its report as before and a third projection turns it into markdown, which
is exactly what the report seam was built for -- no tool touched, no
report changed, one new function beside the other two faces.
Being a written page buys the two things a long block most needs and that
a hand-built screen had neither of. Its ## headings are landmarks, so each
pins to the top row while its own section scrolls under it and ^PgUp/^PgDn
step section by section; and the PicoCalc lane picks up Sect up / Sect
down for the same reason a grouped list does. AboutPage already does all
of it, so the page is that page with one verb added.
The frame comes back with it. The bare frame was there to keep a border
off every line a mouse would drag through, which mattered while copying
off the screen was the only way out; saving is the way out now, so the
page can be a normal screen and the save can be advertised where this app
advertises verbs -- the footer hint on a desktop, the lane's one free F3
slot on the console -- instead of in the page's own body, which belongs to
the report. The answer moves to a popup with it: a path is worth reading
carefully, a write can fail, and the page underneath is unchanged and
still there when the popup goes.
Saving markdown is the same decision as drawing it. One source is what the
page renders and what the file holds, and an issue tracker renders it as
written, with no fence and no apology. Every value is a code span, which
is correctness and not taste: a Windows path is full of backslashes that
markdown reads as escapes, and an error a stranger's firmware wrote can
hold an asterisk. A value already holding a backtick gets a longer fence.
Rows are a list and not a table, measured rather than assumed -- a
markdown table's cells are cropped with an ellipsis at 53 columns, and a
bug report whose one long value is cut is missing the half that mattered.
A list item wraps and hangs under its own text at any width.
Two smaller things fell out. A block may carry a caption, the heading a
format that has headings draws above it -- plain and JSON have no use for
one and ignore it. And the host block splits in two, because a "it looks
wrong" report is about the terminal and its reader should not have to pass
the processor architecture on the way to it.
The command line is untouched: aligned records, because that face is a
stream to grep and headings are furniture on it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Verified on the Mac, and three of the four things it taught were the
opposite of what the code assumed.
RunCommandAsShell is false. Under *true* Terminal takes the whole command
string as the name of a program and the window reads "Command not found:
MESHTERM_REOPENED=1 / Could not create a new process and open a
pseudo-tty". The key's name says otherwise; the measurement wins.
The environment rides on /usr/bin/env rather than on a VAR=value prefix,
for the same reason. env is a real executable, so the line is valid as a
bare argv and as a shell command both, and the window cannot land on that
message however Terminal decides to read the string.
Terminal names an imported settings set after the FILE, not the name key
inside it -- and re-importing the same bytes reuses that profile, while
different bytes under the same filename add "MeshTerm 1", then
"MeshTerm 2". Opening one file four times, three identical and one a word
apart, left exactly two profiles. So the command cannot live in the
profile: it carries argv and the reader's MESHTERM_* variables, and a
profile per command line would fill their settings list with junk only
they can remove. The variable part moved behind a fixed path instead --
the profile says ~/.meshterm/launch.sh and never changes, and the script
underneath says whatever this launch needs.
Three launches with three different command lines now leave one profile
named MeshTerm, the window drawing CascadiaMonoPL-Regular at 13pt on
opaque black at 80x30, with the app running in it. The reader's default
profile is still theirs, blur and all.
shellExitAction 1 while here: tidy the window away on a clean exit, keep
it on a crash, because a crash nobody sees is a bug report nobody writes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>