Files
MeshCore/docs/firmware_picker.md
T

255 lines
12 KiB
Markdown

# Firmware picker
Pick the choices in any order. Every selection narrows all the other controls
to firmware combinations that were actually built in the current release set.
The picker reads public release metadata from GitHub. It does not upload device
information. Hardware names, target names, and download links come directly
from the published firmware assets.
<div class="firmware-picker" data-firmware-picker data-release-repo="mikecarper/MeshCore">
<div class="firmware-picker-intro" role="note">
<strong>Current release set</strong>
<p data-role="release-set">Loading release information...</p>
<p>
For a new installation, choose the exact board and role, prefer a
<strong>FULL / complete profile</strong> when it is available, and select
<strong>Erase &amp; fresh install (merged .bin)</strong>. Narrower profiles
remain available when their reduced transport or feature set is intentional.
</p>
</div>
<p class="firmware-picker-order-note">
Pick in any order. Use <strong>Any</strong> to clear one choice, or clear
everything with the button below.
</p>
<form class="firmware-picker-form" data-role="form">
<div class="firmware-picker-control firmware-picker-select-control">
<label for="firmware-picker-hardware-family">Hardware</label>
<select id="firmware-picker-hardware-family" data-field="hardwareFamily" disabled>
<option value="">Loading hardware...</option>
</select>
</div>
<div class="firmware-picker-control firmware-picker-select-control" data-role="hardware-variant-control" hidden>
<label for="firmware-picker-hardware">Hardware variant</label>
<select id="firmware-picker-hardware" data-field="hardware" disabled>
<option value="">Choose hardware first</option>
</select>
</div>
<fieldset class="firmware-picker-control firmware-picker-radio-control firmware-picker-wide" data-radio-field="install" disabled>
<legend>Install operation</legend>
<div class="firmware-picker-radio-options" data-field="install">
Loading install choices...
</div>
</fieldset>
<fieldset class="firmware-picker-control firmware-picker-radio-control" data-radio-field="role" disabled>
<legend>Firmware role</legend>
<div class="firmware-picker-radio-options" data-field="role">
Loading roles...
</div>
</fieldset>
<fieldset class="firmware-picker-control firmware-picker-radio-control" data-radio-field="logging" disabled>
<legend>Logging / MQTT</legend>
<div class="firmware-picker-radio-options" data-field="logging">
Loading logging choices...
</div>
</fieldset>
<fieldset class="firmware-picker-control firmware-picker-radio-control" data-radio-field="ota" disabled>
<legend>OTA capability</legend>
<div class="firmware-picker-radio-options" data-field="ota">
Loading OTA choices...
</div>
</fieldset>
<div class="firmware-picker-control firmware-picker-select-control">
<label for="firmware-picker-mode">Connection / bridge mode</label>
<select id="firmware-picker-mode" data-field="mode" disabled>
<option value="">Loading modes...</option>
</select>
</div>
<fieldset class="firmware-picker-control firmware-picker-radio-control" data-radio-field="feature" disabled>
<legend>Feature profile</legend>
<div class="firmware-picker-radio-options" data-field="feature">
Loading profiles...
</div>
</fieldset>
<div class="firmware-picker-control firmware-picker-select-control">
<label for="firmware-picker-variant">Firmware variant</label>
<select id="firmware-picker-variant" data-field="variant" disabled>
<option value="">Loading variants...</option>
</select>
</div>
<div class="firmware-picker-form-actions firmware-picker-wide">
<button type="reset" data-action="clear" disabled>Clear all choices</button>
</div>
</form>
<div class="firmware-picker-status" data-role="status" aria-live="polite">
Loading the current firmware catalog...
</div>
<section class="firmware-picker-result" data-role="result" aria-live="polite" hidden>
<p class="firmware-picker-eyebrow">Exact firmware match</p>
<h2>Recommended download</h2>
<div data-role="result-list"></div>
</section>
<section class="firmware-picker-missing" data-role="missing" aria-live="polite" hidden>
<h2>No exact firmware matched</h2>
<p data-role="missing-text"></p>
<a href="https://github.com/mikecarper/MeshCore/releases">Browse all firmware releases</a>
</section>
<details class="firmware-asset-browser">
<summary>Advanced: search current release filenames</summary>
<p>
Use this for uncommon board suffixes or expert recovery. A filename match
is not a board-identity check.
</p>
<label>
Filename contains
<input data-field="asset-search" placeholder="Station_G2, heltec_v4, RAK_4631, ...">
</label>
<div data-role="asset-results"></div>
</details>
</div>
## What the choices mean
| Choice | Use |
| --- | --- |
| Companion | A phone, computer, or host application controls the radio |
| Repeater | Standalone mesh relay |
| Room Server | Hosts room conversations and history |
| Sensor / telemetry | Publishes supported sensor data |
| Terminal Chat | Standalone serial-terminal interface |
| USB logging / USB-connected MQTT | Node remains attached to a computer over a data-capable USB cable |
| Wi-Fi MQTT observer | Firmware connects directly to MQTT over Wi-Fi; this is not USB logging |
| USB logging + Wi-Fi MQTT | Unified FULL image sends to both paths; avoid two publishers aimed at the same broker unless messages are deduplicated |
| No logging | Normal standalone operation without the dedicated logging/MQTT profile |
| LoRa OTA enabled / receiver | Install-capable profile that can stage an exact matching update received over LoRa |
| LoRa OTA source only | Full Companion serving a host-supplied update to another node without self-installing it |
Connection and bridge choices depend on the selected role. Companion firmware
may offer Full, combined USB + Bluetooth, Bluetooth, USB, Wi-Fi, serial, or
Ethernet transports.
Normal repeater firmware includes runtime-controlled RS-232 support where the
board has room; use `set bridge.enabled on` after configuring `bridge.uart` and
`bridge.baud`. The Wio-E5 remains the capacity exception and offers a separate
RS-232 image. Repeaters may also offer separate ESP-NOW, Ethernet, or MQTT
observer modes.
## FULL versus standard
For a new installation, use the FULL / complete profile when it exists and the
board has enough flash. FULL profiles keep the complete supported feature set
and CLI. Standard profiles remain useful for boards without a FULL build, for
an intentionally narrower transport, or when retaining an existing compatible
partition layout.
Changing between standard and FULL ESP32 layouts requires the exact-board
merged image over USB. A running application cannot safely move its own active
and inactive partitions.
Current `full-usb-wifi` profiles use one binary for no external output, USB
packet logging/USB-connected MQTT, direct WiFi MQTT, or both. The picker shows
that same exact binary for each compatible logging choice; select the saved
runtime mode with `set logging.output off|usb|wifi|both`. A FULL logging-fallback
profile is listed only when no WiFi MQTT sibling exists; it appears for both
the no-output and USB choices because `set usb.logging off|on` is persistent.
On a fresh unified FULL install with no saved SSID, the setup AP and WiFi radio
remain available for 30 minutes per boot, then turn off automatically until the
next reboot or power cycle. An explicit administrator `start webconfig` remains
available as an override. A saved SSID switches to the normal indefinite
reconnect behavior instead.
Full Companion profiles use one binary for USB, BLE, ordinary Wi-Fi on ESP32,
source-only LoRa OTA, Terminal Chat, optional USB packet logging, and any
board-qualified serial or Ethernet Companion transport. Bulk builds therefore
omit separate attached-transport, Terminal Chat, and USB-logging artifacts
whenever the exact Full recipe exists. RAK4631 repeater and room-server
Ethernet images remain separate roles. Fresh installs default to logging off.
When Full Companion does not fit but a matching USB Companion does, that USB
artifact also supplies Terminal Chat and replaces its standalone release image.
Heltec E290 and T190 publish a combined USB + BLE Companion. SSD1306 Full
Companion builds use `set display.rotation 90|180|270`; `0` restores the board
default, so a separate rotated release image is not recommended.
Ordinary non-OTA roles also use one artifact for normal operation and USB
logging. Select the saved mode with `set usb.logging off|on`; no `-logging-`
artifact is emitted. KISS, BLE-only Companion, and constrained LoRa-OTA
receiver images retain their protocol/partition contracts and do not inherit
plaintext USB logging.
Dual-CDC nRF52 and qualified native-USB ESP32-S3 builds keep the multi-role
primary interface on `00`; it starts as an ASCII terminal and automatically
hands a complete `<` frame to Binary Companion. `set usb.logging on reboot`
adds plaintext interface `02`.
Single-TTY ESP32 builds instead use `set usb.logging on` to switch that TTY to
an input-capable plaintext logging terminal. `set usb.logging off` stops the
logs and returns the TTY to Binary Companion after its reply. BLE and Wi-Fi
remain usable while the USB TTY is logging.
The dual-CDC ESP32-S3 subset includes Heltec V4, T-Beam 1W, Station G2/G3,
XIAO S3 WIO, Heltec Tracker V2, Meshnology W12, and Nibble Screen/Zero Connect
layouts. Existing single-TTY Full recipes include RAK3112, Heltec RC32,
Heltec V3/WSL3, ThinkNode M2/M5/M7/M9, Heltec V2, LilyGo T-LoRa V2.1.1.6,
and XIAO C3. Additional qualified single-TTY ESP32 profiles include M5Stack
Unit C6L, Heltec Wireless Tracker/Paper/E213/CT62, LilyGo T3S3
SX1262/SX1276, T-Deck, TETH Elite, classic T-Beam SX1262/SX1276, T-Beam S3
Supreme, Ebyte EoRa-S3, Meshadventurer SX1262/SX1268, and XIAO S3.
## Installation methods
| File | Use |
| --- | --- |
| <code>-merged.bin</code> | Erase/fresh install, recovery, role migration, or partition-profile change on ESP32 over USB |
| Non-merged <code>.bin</code> | Update an existing same-board, same-role, same-partition installation |
| <code>.zip</code> | Native nRF52 Serial DFU update package; it is not an extra archive |
| <code>.uf2</code> | UF2 bootloader drag-and-drop install or update |
| <code>.hex</code> | Erase/recovery flash with a supported wired programmer |
Never send a merged ESP32 image through browser OTA or LoRa OTA. Back up the
node configuration and verify every filename suffix before flashing.
## LoRa OTA and OTAFIX
An OTA receiver build installs the receiving/staging firmware. A later LoRa
update still needs an exact target identity, compatible partition signature,
matching radio settings, and the correct update package.
nRF52 LoRa OTA requires an OTAFIX bootloader built for the exact board. There
is no universal bootloader file. Use the
[latest stable OTAFIX release](https://github.com/mikecarper/Adafruit_nRF52_Bootloader_OTAFIX/releases/latest)
and select the hardware-matched HEX, Serial DFU ZIP, or bootloader-update UF2.
## Hardware and variant names
Hardware families with multiple released targets get a second hardware-variant
menu. It separates revisions, display type, expansion kit, radio/PA layout,
pin map, and other physical differences without crowding the first menu. The
firmware-variant menu separately exposes choices that still require different
code or wiring, such as serial port or no-external-sensors. Companion power
saving, controllable FEM receive gain, and radio-chip receive gain are saved
settings rather than separate recommended firmware files. Do not substitute a
similarly named physical target.
For hardware with a dual-CDC Full Companion image, the picker recommends that
one normal image instead of separate USB, BLE, ordinary WiFi, and USB-logging
images. Full Companion provides the attached transports and a dedicated
plaintext logging port when enabled without mixing logs into framed Companion
traffic. Logging is off by default, so only primary interface `00` appears; it
starts in ASCII and automatically changes to framed Companion when a complete
`<` frame arrives. Enabling logging and rebooting adds interface `02`.
Exact filename search still finds old aliases from earlier releases.