rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
285267e3a1d9ae8e2ecddbbf9b2d31317c4de708
MeshCore/variants/rak4631/platformio.ini
T

502 lines
16 KiB
INI
Raw Blame History

[rak4631]
extends = nrf52_base
board = rak4631
board_check = true
board_build.ldscript = boards/nrf52840_s140_v6.ld
extra_scripts = ${nrf52_base.extra_scripts}
post:variants/rak4631/fix_bsec_lib.py
post:tools/mota/pio_endf.py ; EndF trailer for OTA self-identity (all RAK4631 roles)
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/rak4631
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D MOTA_HW_ID='"RAK4631"' ; OTA hardware tag (apply refuses a .mota for different hw)
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
; Saved peripherals.mode defaults to gps-only; shared keeps WB_IO2 alive.
; The boot power policy automatically protects Ethernet/PoE and external NOR.
-D PIN_GPS_EN=-1
-D PIN_OLED_RESET=-1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D ENV_INCLUDE_RAK12035=1
-UENV_INCLUDE_BME680
-D ENV_INCLUDE_BME680_BSEC=1
-D ENABLE_OTA=1 ; LoRa OTA on every RAK4631 role (single-slot, bootloader-applied)
-D OTA_FLASH_STORE=1 ; stage the received .mota in flash (survives reboot into the bootloader)
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/rak4631>
+<helpers/sensors>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/ota/*.cpp>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
boschsensortec/BSEC Software Library @ ^1.8.1492
[env:RAK_4631_repeater]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Cascade repeater image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
; -D OTA_DEBUG=1 ; bring-up: trace OTA fetch (REQ / block / page-flush) over Serial
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
; Shared sources remain inherited, but ENABLE_OTA is explicitly undefined for this oversized role.
+<../examples/simple_repeater>
; Full-sensor/GPS repeater for a RAK4631 fitted with a 2 MiB RAK15001 in sensor
; slot C. Its WP#/HOLD# inputs have onboard pull-ups, so firmware does not drive
; slot GPIO. Do not use this target with RAK13800 Ethernet, RAK15002 SD, or
; another SPI module.
[env:RAK_4631_repeater_rak15001_slot_c_lora_ota]
extends = rak4631
build_unflags =
-D MOTA_HW_ID='"RAK4631"'
-D OTA_FLASH_STORE=1
build_flags =
${rak4631.build_flags}
${nrf52_rak15001_ota.build_flags}
-D MOTA_HW_ID='"RAK4631_RAK15001_C"'
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 + RAK15001 OTA"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
; Full-sensor/GPS repeater with an exact 2 MiB Winbond W25Q16JV breakout. The
; flash shares the RAK19007 SPI clock/data nets, uses its own CS on J11 AIN1,
; and does not occupy a sensor slot. The RAK4631 radio has a separate internal
; SPI bus. A matching exact-EF4015 OTAFIX bootloader is required.
[env:RAK_4631_repeater_w25q16_lora_ota]
extends = rak4631
build_unflags =
-D MOTA_HW_ID='"RAK4631"'
-D OTA_FLASH_STORE=1
build_flags =
${rak4631.build_flags}
${nrf52_wisblock_w25q16_ota.build_flags}
-D MOTA_HW_ID='"RAK4631_W25Q16"'
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 + W25Q16 OTA"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
; One full-sensor repeater image for internal flash, W25Q16, or RAK15001 C.
; The matching OTAFIX bootloader for the installed hardware is still required.
[env:RAK_4631_repeater_unified_lora_ota]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_wisblock_auto_ota.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Lean OTA target for space-constrained RAK4631 repeaters. This removes optional external
; environmental sensor packages while retaining the common INA I2C voltage/current monitors and
; RAK12500/RAK12501 GPS support. The legacy no_external_sensors target name remains stable for OTA
; compatibility. RAK4631Board::getBattMilliVolts(), repeater telemetry, and battery.alert remain part
; of the board/repeater sources below.
; RAK12500 and the configured INA3221 both use I2C address 0x42. When both are required, keep GPS at
; 0x42, strap INA3221 A0 to SCL for 0x43, and build with -DTELEM_INA3221_ADDRESS=0x43.
[env:RAK_4631_repeater_lora_ota_no_external_sensors]
extends = rak4631
extra_scripts = ${nrf52_lora_ota.extra_scripts}
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina_gps.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 LoRa OTA No Ext Sensors"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
build_src_filter = ${nrf52_lora_ota.build_src_filter}
+<../variants/rak4631>
+<helpers/sensors/EnvironmentSensorManager.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina_gps.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:RAK_4631_repeater_ethernet]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D ETHERNET_ENABLED=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak4631.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_repeater_bridge_rs232_serial1]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial1
-D WITH_RS232_BRIDGE_UART=1
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
-UENV_INCLUDE_GPS
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D CORE_DEBUG_LEVEL=3
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Explicit lean alternative to the full-sensor, non-OTA Serial1 bridge above. GPS remains disabled:
; both the RAK12501 and this bridge require Serial1, so enabling both would corrupt both protocols.
[env:RAK_4631_repeater_bridge_rs232_serial1_lora_ota_no_external_sensors]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial1
-D WITH_RS232_BRIDGE_UART=1
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
[env:RAK_4631_repeater_bridge_rs232_serial2]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-UENV_INCLUDE_GPS
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D CORE_DEBUG_LEVEL=3
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Explicit lean alternative to the full-sensor, non-OTA Serial2 bridge above. GPS remains available
; on Serial1 because this bridge owns Serial2.
[env:RAK_4631_repeater_bridge_rs232_serial2_lora_ota_no_external_sensors]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina_gps.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina_gps.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:RAK_4631_room_server]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Test Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
[env:RAK_4631_room_server_ethernet]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Room Server"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D ETHERNET_ENABLED=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${rak4631.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_usb]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak4631.build_flags}
-D RAK4631_COMPANION_FORCE_LDO=1
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D MESH_CONTACT_CACHE=1
-D ENABLE_USB_INTERFACE
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_companion_radio_ethernet]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6.ld
board_upload.maximum_size = 712704
build_unflags =
-D EXTRAFS=1
build_flags =
${rak4631.build_flags}
-D RAK4631_COMPANION_FORCE_LDO=1
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ETHERNET_ENABLED=1
-D ETHERNET_USE_RAK13800
-D ETHERNET_CLASS=RAK13800EthernetInterface
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
; -D ETHERNET_DEBUG_LOGGING=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ethernet/*.cpp>
+<helpers/ethernet/RAK13800/>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_full]
extends = env:RAK_4631_companion_radio_usb
build_flags =
${env:RAK_4631_companion_radio_usb.build_flags}
-D ETHERNET_ENABLED=1
-D ETHERNET_USE_RAK13800
-D ETHERNET_CLASS=RAK13800EthernetInterface
-D MESHCORE_REQUIRES_COMPANION_RADIO_FULL=1
build_src_filter = ${env:RAK_4631_companion_radio_usb.build_src_filter}
+<helpers/ethernet/*.cpp>
+<helpers/ethernet/RAK13800/>
lib_deps =
${env:RAK_4631_companion_radio_usb.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_ble]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak4631.build_flags}
-D RAK4631_COMPANION_FORCE_LDO=1
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D MESH_CONTACT_CACHE=1
-D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_terminal_chat]
extends = rak4631
build_flags =
${rak4631.build_flags}
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D MAX_CONTACTS=100
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_sensor]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full sensor image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D USER_GPIO_CONTROL=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
[env:RAK_4631_kiss_modem]
extends = rak4631
build_flags =
${rak4631.build_flags}
build_src_filter = ${rak4631.build_src_filter}
+<../examples/kiss_modem/>
lib_deps =
${rak4631.lib_deps}
Reference in new issue View Git Blame Copy Permalink