[rak4631] extends = nrf52_base board = rak4631 board_check = true board_build.ldscript = boards/nrf52840_s140_v6.ld extra_scripts = ${nrf52_base.extra_scripts} post:variants/rak4631/fix_bsec_lib.py post:tools/mota/pio_endf.py ; EndF trailer for OTA self-identity (all RAK4631 roles) build_flags = ${nrf52_base.build_flags} ${sensor_base.build_flags} -I variants/rak4631 -D RAK_4631 -D RAK_BOARD -D NRF52_POWER_MANAGEMENT -D MOTA_HW_ID='"RAK4631"' ; OTA hardware tag (apply refuses a .mota for different hw) -D PIN_BOARD_SCL=14 -D PIN_BOARD_SDA=13 ; Saved peripherals.mode defaults to gps-only; shared keeps WB_IO2 alive. ; The boot power policy automatically protects Ethernet/PoE and external NOR. -D PIN_GPS_EN=-1 -D PIN_OLED_RESET=-1 -D USE_SX1262 -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper -D LORA_TX_POWER=22 -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 -D ENV_INCLUDE_RAK12035=1 -UENV_INCLUDE_BME680 -D ENV_INCLUDE_BME680_BSEC=1 -D ENABLE_OTA=1 ; LoRa OTA on every RAK4631 role (single-slot, bootloader-applied) -D OTA_FLASH_STORE=1 ; stage the received .mota in flash (survives reboot into the bootloader) -D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW) build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631> + + + + lib_deps = ${nrf52_base.lib_deps} ${sensor_base.lib_deps} adafruit/Adafruit SSD1306 @ ^2.5.13 sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27 boschsensortec/BSEC Software Library @ ^1.8.1492 [env:RAK_4631_repeater] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Cascade repeater image exceeds the safe nRF52 in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial2 -D WITH_RS232_BRIDGE_UART=2 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX -D WITH_RS232_BRIDGE_ALT=Serial1 -D WITH_RS232_BRIDGE_ALT_UART=1 -D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX -D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX -D RS232_BRIDGE_MERGED=1 -D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1 ; -D OTA_DEBUG=1 ; bring-up: trace OTA fetch (REQ / block / page-flush) over Serial ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 ; -D POWERSAVING_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + + ; Shared sources remain inherited, but ENABLE_OTA is explicitly undefined for this oversized role. +<../examples/simple_repeater> ; Full-sensor/GPS repeater for a RAK4631 fitted with a 2 MiB RAK15001 in sensor ; slot C. Its WP#/HOLD# inputs have onboard pull-ups, so firmware does not drive ; slot GPIO. Do not use this target with RAK13800 Ethernet, RAK15002 SD, or ; another SPI module. [env:RAK_4631_repeater_rak15001_slot_c_lora_ota] extends = rak4631 build_unflags = -D MOTA_HW_ID='"RAK4631"' -D OTA_FLASH_STORE=1 build_flags = ${rak4631.build_flags} ${nrf52_rak15001_ota.build_flags} -D MOTA_HW_ID='"RAK4631_RAK15001_C"' -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 + RAK15001 OTA"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_repeater> ; Full-sensor/GPS repeater with an exact 2 MiB Winbond W25Q16JV breakout. The ; flash shares the RAK19007 SPI clock/data nets, uses its own CS on J11 AIN1, ; and does not occupy a sensor slot. The RAK4631 radio has a separate internal ; SPI bus. A matching exact-EF4015 OTAFIX bootloader is required. [env:RAK_4631_repeater_w25q16_lora_ota] extends = rak4631 build_unflags = -D MOTA_HW_ID='"RAK4631"' -D OTA_FLASH_STORE=1 build_flags = ${rak4631.build_flags} ${nrf52_wisblock_w25q16_ota.build_flags} -D MOTA_HW_ID='"RAK4631_W25Q16"' -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 + W25Q16 OTA"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_repeater> ; One full-sensor repeater image for internal flash, W25Q16, or RAK15001 C. ; The matching OTAFIX bootloader for the installed hardware is still required. [env:RAK_4631_repeater_unified_lora_ota] extends = rak4631 build_flags = ${rak4631.build_flags} ${nrf52_wisblock_auto_ota.build_flags} -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial2 -D WITH_RS232_BRIDGE_UART=2 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX -D WITH_RS232_BRIDGE_ALT=Serial1 -D WITH_RS232_BRIDGE_ALT_UART=1 -D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX -D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX -D RS232_BRIDGE_MERGED=1 -D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1 build_src_filter = ${rak4631.build_src_filter} + + +<../examples/simple_repeater> ; Lean OTA target for space-constrained RAK4631 repeaters. This removes optional external ; environmental sensor packages while retaining the common INA I2C voltage/current monitors and ; RAK12500/RAK12501 GPS support. The legacy no_external_sensors target name remains stable for OTA ; compatibility. RAK4631Board::getBattMilliVolts(), repeater telemetry, and battery.alert remain part ; of the board/repeater sources below. ; RAK12500 and the configured INA3221 both use I2C address 0x42. When both are required, keep GPS at ; 0x42, strap INA3221 A0 to SCL for 0x43, and build with -DTELEM_INA3221_ADDRESS=0x43. [env:RAK_4631_repeater_lora_ota_no_external_sensors] extends = rak4631 extra_scripts = ${nrf52_lora_ota.extra_scripts} build_flags = ${rak4631.build_flags} ${nrf52_reduced_sensors_keep_ina_gps.build_flags} -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 LoRa OTA No Ext Sensors"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial2 -D WITH_RS232_BRIDGE_UART=2 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX -D WITH_RS232_BRIDGE_ALT=Serial1 -D WITH_RS232_BRIDGE_ALT_UART=1 -D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX -D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX -D RS232_BRIDGE_MERGED=1 -D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1 build_src_filter = ${nrf52_lora_ota.build_src_filter} +<../variants/rak4631> + + + + +<../examples/simple_repeater> lib_deps = ${nrf52_lora_ota.lib_deps} ${nrf52_reduced_sensors_keep_ina_gps.lib_deps} adafruit/Adafruit SSD1306 @ ^2.5.13 sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27 [env:RAK_4631_repeater_ethernet] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D ETHERNET_ENABLED=1 ; -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_repeater> lib_deps = ${rak4631.lib_deps} https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip [env:RAK_4631_repeater_bridge_rs232_serial1] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RS232 Bridge"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial1 -D WITH_RS232_BRIDGE_UART=1 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX -UENV_INCLUDE_GPS ; -D BRIDGE_DEBUG=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 ; -D CORE_DEBUG_LEVEL=3 build_src_filter = ${rak4631.build_src_filter} + + +<../examples/simple_repeater> ; Explicit lean alternative to the full-sensor, non-OTA Serial1 bridge above. GPS remains disabled: ; both the RAK12501 and this bridge require Serial1, so enabling both would corrupt both protocols. [env:RAK_4631_repeater_bridge_rs232_serial1_lora_ota_no_external_sensors] extends = rak4631 build_flags = ${rak4631.build_flags} ${nrf52_reduced_sensors_keep_ina.build_flags} -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RS232 Bridge"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial1 -D WITH_RS232_BRIDGE_UART=1 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX build_src_filter = ${rak4631.build_src_filter} + + +<../examples/simple_repeater> lib_deps = ${nrf52_lora_ota.lib_deps} ${nrf52_reduced_sensors_keep_ina.lib_deps} adafruit/Adafruit SSD1306 @ ^2.5.13 [env:RAK_4631_repeater_bridge_rs232_serial2] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RS232 Bridge"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial2 -D WITH_RS232_BRIDGE_UART=2 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX -UENV_INCLUDE_GPS ; -D BRIDGE_DEBUG=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 ; -D CORE_DEBUG_LEVEL=3 build_src_filter = ${rak4631.build_src_filter} + + +<../examples/simple_repeater> ; Explicit lean alternative to the full-sensor, non-OTA Serial2 bridge above. GPS remains available ; on Serial1 because this bridge owns Serial2. [env:RAK_4631_repeater_bridge_rs232_serial2_lora_ota_no_external_sensors] extends = rak4631 build_flags = ${rak4631.build_flags} ${nrf52_reduced_sensors_keep_ina_gps.build_flags} -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RS232 Bridge"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_RS232_BRIDGE=Serial2 -D WITH_RS232_BRIDGE_UART=2 -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX build_src_filter = ${rak4631.build_src_filter} + + +<../examples/simple_repeater> lib_deps = ${nrf52_lora_ota.lib_deps} ${nrf52_reduced_sensors_keep_ina_gps.lib_deps} adafruit/Adafruit SSD1306 @ ^2.5.13 sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27 [env:RAK_4631_room_server] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"Test Room"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D ROOM_PASSWORD='"hello"' ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_room_server> [env:RAK_4631_room_server_ethernet] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 Room Server"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D ROOM_PASSWORD='"hello"' -D ETHERNET_ENABLED=1 ; -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_room_server> lib_deps = ${rak4631.lib_deps} https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip [env:RAK_4631_companion_radio_usb] extends = rak4631 board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld board_upload.maximum_size = 712704 build_flags = ${rak4631.build_flags} -D RAK4631_COMPANION_FORCE_LDO=1 -I examples/companion_radio/ui-new -D PIN_USER_BTN=9 -D PIN_USER_BTN_ANA=31 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D MESH_CONTACT_CACHE=1 -D ENABLE_USB_INTERFACE ; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 ; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${rak4631.lib_deps} densaugeo/base64 @ ~1.4.0 [env:RAK_4631_companion_radio_ethernet] extends = rak4631 board_build.ldscript = boards/nrf52840_s140_v6.ld board_upload.maximum_size = 712704 build_unflags = -D EXTRAFS=1 build_flags = ${rak4631.build_flags} -D RAK4631_COMPANION_FORCE_LDO=1 -I examples/companion_radio/ui-new -D PIN_USER_BTN=9 -D PIN_USER_BTN_ANA=31 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D ETHERNET_ENABLED=1 -D ETHERNET_USE_RAK13800 -D ETHERNET_CLASS=RAK13800EthernetInterface ; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 ; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 ; -D ETHERNET_DEBUG_LOGGING=1 build_src_filter = ${rak4631.build_src_filter} +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> + + lib_deps = ${rak4631.lib_deps} densaugeo/base64 @ ~1.4.0 https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip [env:RAK_4631_companion_radio_full] extends = env:RAK_4631_companion_radio_usb build_flags = ${env:RAK_4631_companion_radio_usb.build_flags} -D ETHERNET_ENABLED=1 -D ETHERNET_USE_RAK13800 -D ETHERNET_CLASS=RAK13800EthernetInterface -D MESHCORE_REQUIRES_COMPANION_RADIO_FULL=1 build_src_filter = ${env:RAK_4631_companion_radio_usb.build_src_filter} + + lib_deps = ${env:RAK_4631_companion_radio_usb.lib_deps} https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip [env:RAK_4631_companion_radio_ble] extends = rak4631 board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld board_upload.maximum_size = 712704 build_flags = ${rak4631.build_flags} -D RAK4631_COMPANION_FORCE_LDO=1 -I examples/companion_radio/ui-new -D PIN_USER_BTN=9 -D PIN_USER_BTN_ANA=31 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D MESH_CONTACT_CACHE=1 -D BLE_PIN_CODE=123456 ; -D BLE_DEBUG_LOGGING=1 -D OFFLINE_QUEUE_SIZE=256 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 ; -D POWERSAVING_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${rak4631.lib_deps} densaugeo/base64 @ ~1.4.0 [env:RAK_4631_terminal_chat] extends = rak4631 build_flags = ${rak4631.build_flags} -D PIN_USER_BTN=9 -D PIN_USER_BTN_ANA=31 -D MAX_CONTACTS=100 -D MAX_GROUP_CHANNELS=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${rak4631.lib_deps} densaugeo/base64 @ ~1.4.0 [env:RAK_4631_sensor] extends = rak4631 build_flags = ${rak4631.build_flags} -UENABLE_OTA -D DISABLE_LORA_OTA=1 ; Full sensor image exceeds the safe nRF52 in-place OTA ceiling -D DISPLAY_CLASS=SSD1306Display -D ADVERT_NAME='"RAK4631 Sensor"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D USER_GPIO_CONTROL=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} + +<../examples/simple_sensor> [env:RAK_4631_kiss_modem] extends = rak4631 build_flags = ${rak4631.build_flags} build_src_filter = ${rak4631.build_src_filter} +<../examples/kiss_modem/> lib_deps = ${rak4631.lib_deps}