* version 1.17.1

Merge pull request #3206 from meshcore-dev/nrf-combine-rng-entropy
combine radio's entropy with CC310 RNG
2026-08-14 22:19:19 +10:00 · 2026-08-14 22:09:26 +10:00 · 2026-08-14 17:46:43 +10:00 · 2026-08-14 16:44:59 +10:00 · 2026-08-14 16:42:54 +10:00 · 2026-08-14 16:30:12 +10:00
511 changed files with 10849 additions and 71586 deletions
@@ -1,13 +0,0 @@
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99968,"max_alloc":81908,"internal_free":99968,"spiram_free":2079119},"timestamp":60038}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":186636,"max_alloc":81908,"internal_free":186636,"spiram_free":2079887},"timestamp":120040}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":94328,"max_alloc":81908,"internal_free":94328,"spiram_free":2079119},"timestamp":180078}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99564,"max_alloc":81908,"internal_free":99564,"spiram_free":2079119},"timestamp":240093}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99564,"max_alloc":81908,"internal_free":99564,"spiram_free":2079119},"timestamp":300130}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203620,"max_alloc":81908,"internal_free":203620,"spiram_free":2079927},"timestamp":360131}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203620,"max_alloc":81908,"internal_free":203620,"spiram_free":2079927},"timestamp":420131}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99732,"max_alloc":81908,"internal_free":99732,"spiram_free":2079119},"timestamp":480150}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":164132,"max_alloc":69620,"internal_free":164132,"spiram_free":2079119},"timestamp":540153}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":90808,"max_alloc":79860,"internal_free":90808,"spiram_free":2079119},"timestamp":600166}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99676,"max_alloc":81908,"internal_free":99676,"spiram_free":2079119},"timestamp":660181}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99708,"max_alloc":81908,"internal_free":99708,"spiram_free":2079119},"timestamp":720195}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99720,"max_alloc":81908,"internal_free":99720,"spiram_free":2079119},"timestamp":780217}
@@ -1,40 +0,0 @@
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:2142","message":"after_new_analyzer_us_client","hypothesisId":"H4","data":{"free":219116,"max_alloc":208884,"internal_free":219116,"spiram_free":2080343},"timestamp":4420}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:2182","message":"after_new_analyzer_eu_client","hypothesisId":"H4","data":{"free":218704,"max_alloc":208884,"internal_free":218704,"spiram_free":2080343},"timestamp":4422}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":96768,"max_alloc":81908,"internal_free":96768,"spiram_free":2079119},"timestamp":60033}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163244,"max_alloc":71668,"internal_free":163244,"spiram_free":2079119},"timestamp":120034}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":166716,"max_alloc":71668,"internal_free":166716,"spiram_free":2079119},"timestamp":180036}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163240,"max_alloc":71668,"internal_free":163240,"spiram_free":2079119},"timestamp":240035}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163372,"max_alloc":71668,"internal_free":163372,"spiram_free":2079119},"timestamp":300035}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163728,"max_alloc":71668,"internal_free":163728,"spiram_free":2079119},"timestamp":360037}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":420038}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":480040}MQTT: Stored raw radio data: 74 bytes, SNR=11.2, RSSI=-59.0
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163500,"max_alloc":71668,"internal_free":163500,"spiram_free":2079119},"timestamp":540040}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163320,"max_alloc":71668,"internal_free":163320,"spiram_free":2079119},"timestamp":600041}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163352,"max_alloc":71668,"internal_free":163352,"spiram_free":2079119},"timestamp":660043}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163340,"max_alloc":71668,"internal_free":163340,"spiram_free":2079119},"timestamp":720044}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163912,"max_alloc":71668,"internal_free":163912,"spiram_free":2079119},"timestamp":780045}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":840044}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:716","message":"critical_memory_check","hypothesisId":"H1_H4","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":900003}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":900045}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":169512,"max_alloc":71668,"internal_free":169512,"spiram_free":2079119},"timestamp":960046}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":166480,"max_alloc":71668,"internal_free":166480,"spiram_free":2079119},"timestamp":1020050}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":163324,"max_alloc":71668,"internal_free":163324,"spiram_free":2079119},"timestamp":1080052}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203612,"max_alloc":83956,"internal_free":203612,"spiram_free":2079927},"timestamp":1140052}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203612,"max_alloc":83956,"internal_free":203612,"spiram_free":2079927},"timestamp":1200056}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1260059}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1320062}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1380064}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1440067}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1500069}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203700,"max_alloc":83956,"internal_free":203700,"spiram_free":2079927},"timestamp":1560072}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203652,"max_alloc":83956,"internal_free":203652,"spiram_free":2079927},"timestamp":1620076}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203748,"max_alloc":83956,"internal_free":203748,"spiram_free":2079887},"timestamp":1680080}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1740082}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:716","message":"critical_memory_check","hypothesisId":"H1_H4","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1800004}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1800086}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1860087}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1920090}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203648,"max_alloc":83956,"internal_free":203648,"spiram_free":2079927},"timestamp":1980092}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":203700,"max_alloc":83956,"internal_free":203700,"spiram_free":2079927},"timestamp":2040094}
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":92832,"max_alloc":83956,"internal_free":92612,"spiram_free":2074463},"timestamp":2100108}02:24:28 - 5/2/2026 U RAW: 09054F86AB7EE0223B896D851B3704309F
-{"sessionId":"debug-session","location":"MQTTBridge.cpp:505","message":"mqtt_loop_60s","hypothesisId":"H5","data":{"free":99732,"max_alloc":81908,"internal_free":99732,"spiram_free":2079119},"timestamp":2160133}
@@ -12,14 +12,15 @@
 	"runArgs": [
 		"--privileged",
 		"--network=host",
-		"--volume=/dev/bus/usb:/dev/bus/usb:ro",
-		// arch tty* is owned by uucp (986)
+		"--device=/dev/bus/usb",
+		// arch linux tty* is owned by uucp (986)
+		"--group-add=986",
 		// debian tty* is owned by dialout (20)
-		"--group-add=20",
-		"--group-add=986"
+		"--group-add=20"
 	],
 	"postCreateCommand": {
-		"platformio": "pipx install platformio"
+		"platformio": "pipx install platformio",
+		"opencode": "curl -fsSL https://opencode.ai/install | bash"
 	},
 	"customizations": {
 		"vscode": {
@@ -25,5 +25,14 @@ runs:
    - name: Extract Version from Git Tag
      shell: bash
      run: |
-        GIT_TAG_NAME="${GITHUB_REF#refs/tags/}"
-        echo "GIT_TAG_VERSION=${GIT_TAG_NAME##*-}" >> $GITHUB_ENV
+        if [[ "${GITHUB_REF}" == refs/tags/* ]]; then
+          # triggered by a tag push (e.g: refs/tags/companion-v1.2.3)
+          GIT_TAG_NAME="${GITHUB_REF#refs/tags/}"
+          VERSION_STRING="${GIT_TAG_NAME##*-}"
+        else
+          # triggered by a workflow dispatch (e.g: refs/heads/main)
+          # strip "refs/heads/" prefix and replace any remaining "/" with "-" to protect file paths
+          BRANCH_NAME="${GITHUB_REF#refs/heads/}"
+          VERSION_STRING=$(echo "$BRANCH_NAME" | tr '/' '-')
+        fi
+        echo "GIT_TAG_VERSION=${VERSION_STRING}" >> $GITHUB_ENV
@@ -10,33 +10,8 @@ on:
      - 'companion-*'

 jobs:
-
-  build:
-    runs-on: ubuntu-latest
-    steps:
-
-      - name: Clone Repo
-        uses: actions/checkout@v6
-
-      - name: Setup Build Environment
-        uses: ./.github/actions/setup-build-environment
-
-      - name: Build Firmwares
-        env:
-          FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }}
-        run: /usr/bin/env bash build.sh build-companion-firmwares
-
-      - name: Upload Workflow Artifacts
-        uses: actions/upload-artifact@v7
-        with:
-          name: companion-firmwares
-          path: out
-
-      - name: Create Release
-        uses: softprops/action-gh-release@v3
-        if: startsWith(github.ref, 'refs/tags/')
-        with:
-          name: Companion Firmware ${{ env.GIT_TAG_VERSION }}
-          body: ""
-          draft: true
-          files: out/*
+  build-companion-firmwares:
+    uses: ./.github/workflows/firmware-builder.yml
+    with:
+      firmware_type: 'companion'
+      release_title_prefix: 'Companion Firmware'
@@ -1,297 +0,0 @@
-name: Build MQTT Observer Firmwares
-
-permissions:
-  contents: write
-
-on:
-  workflow_dispatch:
-  push:
-    branches:
-      - mqtt-bridge-implementation-flex
-    # Only rebuild firmware when something that affects the binaries changes.
-    # Docs, the changelog, the changelog generator, CI files, and repo-meta
-    # files do not change firmware output — docs/changelog are handled by
-    # sync-flasher-content.yml instead. NOTE: a push is skipped only if EVERY
-    # changed file matches a pattern below; one stray unlisted file (e.g. an
-    # earlier .gitignore edit) triggers a full build, so keep meta files listed.
-    paths-ignore:
-      - '**.md'
-      - 'docs/**'
-      - 'scripts/gen_changelog.py'
-      - '.github/**'
-      - '.gitignore'
-      - '.gitattributes'
-      - '.editorconfig'
-      - 'LICENSE'
-      - '.vscode/**'
-      - '.claude/**'
-
-# Serialize with sync-flasher-content.yml so the two workflows never push to the
-# flasher repo at the same time (shared group name across both workflows).
-concurrency:
-  group: flasher-publish
-  cancel-in-progress: false
-
-env:
-  # Version embedded in firmware filenames; must match the version key in the
-  # flasher's config.json. Bump here when the observer version changes.
-  FIRMWARE_VERSION: v1.16.0
-  # Rolling release tag that hosts the latest observer binaries.
-  RELEASE_TAG: observer-mqtt-latest
-
-jobs:
-
-  # Discover the *_observer_mqtt envs and split them into SHARDS groups so the
-  # build fans out across runners (pio builds envs sequentially within a job).
-  enumerate:
-    runs-on: ubuntu-latest
-    outputs:
-      matrix: ${{ steps.split.outputs.matrix }}
-      build_number: ${{ steps.buildnum.outputs.n }}
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-
-      - name: Split observer envs into shards
-        id: split
-        shell: bash
-        run: |
-          SHARDS=14
-          ENVS=$(grep -rhoE '^\[env:[^]]*observer_mqtt\]' platformio.ini variants/*/platformio.ini \
-                 | sed -E 's/^\[env:(.*)\]$/\1/' | sort -u)
-          echo "Discovered envs:"; echo "$ENVS"
-          MATRIX=$(echo "$ENVS" | awk -v n="$SHARDS" '
-              { shard[NR % n] = shard[NR % n] " " $0 }
-              END { for (i = 0; i < n; i++) { sub(/^ /, "", shard[i]);
-                    printf "{\"idx\":%d,\"envs\":\"%s\"}\n", i, shard[i] } }' \
-              | jq -cs .)
-          echo "matrix=$MATRIX" >> "$GITHUB_OUTPUT"
-
-      - name: Compute observer build number
-        id: buildnum
-        shell: bash
-        run: |
-          # Per-base published-build counter. N increments once per release and
-          # resets to 1 when FIRMWARE_VERSION (the MeshCore base version) changes.
-          # Read-only here (off the published counter); the release job is the sole
-          # writer and only writes on a successful build, so a failed build doesn't
-          # burn a number. First run / 404 -> empty -> N=1.
-          COUNTER_URL="https://observer.gessaman.com/observer-build-counter.json"
-          CUR=$(curl -fsSL "$COUNTER_URL" 2>/dev/null || echo '{}')
-          PREV_BASE=$(echo "$CUR" | jq -r '.baseVersion // ""')
-          PREV_BUILD=$(echo "$CUR" | jq -r '.build // 0')
-          if [ "$PREV_BASE" = "$FIRMWARE_VERSION" ]; then
-            N=$((PREV_BUILD + 1))
-          else
-            N=1
-          fi
-          echo "Base $FIRMWARE_VERSION; previous build $PREV_BUILD (base $PREV_BASE) -> N=$N"
-          echo "n=$N" >> "$GITHUB_OUTPUT"
-
-  # Build one shard (several envs) per runner. build.sh emits both the app
-  # .bin and the ESP32 -merged.bin into out/ for each env.
-  build:
-    needs: enumerate
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        shard: ${{ fromJSON(needs.enumerate.outputs.matrix) }}
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-
-      # Cache the installed PlatformIO platforms + toolchains (the espressif32
-      # toolchain + Arduino framework are pinned in platformio.ini, so they are
-      # identical across commits). This skips the multi-hundred-MB download AND
-      # re-extraction that otherwise happens on every fresh runner's first build.
-      # Note: compiled objects are not worth caching here because build.sh injects
-      # a changing -DFIRMWARE_VERSION/-DFIRMWARE_BUILD_DATE into the global build
-      # flags, which busts every object's compile-command checksum each build.
-      - name: Cache PlatformIO Toolchains
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.platformio/packages
-            ~/.platformio/platforms
-          key: pio-toolchains-${{ runner.os }}-${{ hashFiles('platformio.ini') }}
-          restore-keys: |
-            pio-toolchains-${{ runner.os }}-
-
-      - name: Setup Build Environment
-        uses: ./.github/actions/setup-build-environment
-
-      - name: Build Shard ${{ matrix.shard.idx }}
-        env:
-          # Stamp the per-base build number into the embedded version (v1.16.0.N).
-          FIRMWARE_BUILD_NUMBER: ${{ needs.enumerate.outputs.build_number }}
-        run: /usr/bin/env bash build.sh build-firmware ${{ matrix.shard.envs }}
-
-      - name: Upload Shard Artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: fw-${{ matrix.shard.idx }}
-          path: out
-          if-no-files-found: error
-
-  # Collect all shard outputs, publish the rolling release, then point the
-  # flasher at the new build by bumping the hash + notes in its config.json.
-  release:
-    needs: [enumerate, build]
-    runs-on: ubuntu-latest
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-        # Intentionally shallow (default depth 1). "Compute Short SHA" below must
-        # run on the same shallow clone the build job used, because
-        # `git rev-parse --short` auto-extends its abbreviation as the object
-        # count grows (7 chars shallow, 8 chars with full history). build.sh names
-        # the firmware assets from a shallow clone, so a full-history release job
-        # would write an 8-char hash into config.json that no asset matches.
-        # History is deepened later, only for the changelog step.
-
-      - name: Download All Shard Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts
-
-      - name: Flatten into out/
-        run: |
-          mkdir -p out
-          find artifacts -type f -name '*.bin' -exec cp -f {} out/ \;
-          # Per-env partition-table signatures (for the slim manifest's OTA gate).
-          find artifacts -type f -name '*.partsig' -exec cp -f {} out/ \;
-          echo "Collected binaries:"; ls -1 out
-
-      - name: Compute Short SHA
-        id: sha
-        run: echo "short=$(git rev-parse --short HEAD)" >> "$GITHUB_OUTPUT"
-
-      - name: Publish to Rolling Release (tag pinned; assets replaced in place)
-        env:
-          GH_TOKEN: ${{ github.token }}
-        run: |
-          # Create the release + tag once, then never move the tag again. Moving a
-          # rolling tag on every build causes "conflicting tag" errors in local
-          # clones (and a brief 404 window from delete/recreate).
-          if ! gh release view "$RELEASE_TAG" >/dev/null 2>&1; then
-            gh release create "$RELEASE_TAG" --prerelease \
-              --title "MQTT Observer Firmwares" \
-              --notes "Rolling build of all *_observer_mqtt firmwares. The git short hash is embedded in each asset filename."
-          fi
-
-          # Upload this build, overwriting same-named assets. Exclude the .partsig
-          # files — those are consumed locally by the slim-manifest generator below,
-          # not published as release assets (and they'd break the hash-based prune).
-          gh release upload "$RELEASE_TAG" $(find out -maxdepth 1 -type f ! -name '*.partsig') --clobber
-
-          # Prune old assets, but RETAIN the most recent KEEP_BUILDS build hashes
-          # (not just the current one). The flasher SPA reads config.json once at
-          # page load and the embedded git short-hash is what links it to assets;
-          # if we pruned down to only the current build, a tab opened during the
-          # previous build cycle would request an already-deleted binary and 404.
-          # Keeping the previous build covers that window.
-          # Pick the KEEP_BUILDS most-recent distinct build hashes: list assets as
-          # "<createdAt> <name>", sort newest-first (ISO timestamps sort lexically),
-          # pull the git short-hash out of each filename, de-dup preserving order.
-          KEEP_BUILDS=2
-          keep_hashes=$(gh release view "$RELEASE_TAG" --json assets \
-              -q '.assets[] | "\(.createdAt) \(.name)"' \
-            | sort -r \
-            | while read -r _ts name; do
-                printf '%s' "$name" | grep -oiE '[0-9a-f]{7,40}(-merged)?\.bin$' | grep -oiE '^[0-9a-f]{7,40}'
-              done \
-            | awk '!seen[$0]++' | head -n "$KEEP_BUILDS")
-          echo "Retaining build hashes:"; echo "$keep_hashes"
-          gh release view "$RELEASE_TAG" --json assets -q '.assets[].name' \
-            | while read -r asset; do
-                # `|| true`: a non-firmware asset (no embedded hash) makes grep exit
-                # non-zero, which under `bash -e` would abort the step. Empty ah then
-                # falls through to delete-asset, cleaning up any stray non-.bin asset.
-                ah=$(printf '%s' "$asset" | grep -oiE '[0-9a-f]{7,40}(-merged)?\.bin$' | grep -oiE '^[0-9a-f]{7,40}' || true)
-                if [ -n "$ah" ] && grep -qxF "$ah" <<<"$keep_hashes"; then
-                  continue
-                fi
-                gh release delete-asset "$RELEASE_TAG" "$asset" --yes || true
-              done
-
-      - name: Checkout Flasher Repo
-        uses: actions/checkout@v4
-        with:
-          repository: agessaman/flasher.meshcore.io
-          token: ${{ secrets.FLASHER_DISPATCH_TOKEN }}
-          path: flasher
-
-      - name: Update Flasher Config
-        run: |
-          python3 flasher/scripts/update-firmware.py \
-            "${{ steps.sha.outputs.short }}" \
-            "$GITHUB_WORKSPACE/firmware-notes.html"
-
-      - name: Generate Slim Per-Variant Manifests + Persist Build Counter
-        env:
-          BUILD_NUMBER: ${{ needs.enumerate.outputs.build_number }}
-        run: |
-          # Derive the slim per-variant manifests (flasher/v/<env>.json) that the
-          # firmware fetches for `ota check`/`ota update`, from the just-updated
-          # config.json (single source of truth), stamping this build's number.
-          # Then persist the counter so the next run increments from here.
-          python3 flasher/scripts/gen-slim-manifests.py \
-            --config flasher/config.json \
-            --out-dir flasher/v \
-            --base-version "$FIRMWARE_VERSION" \
-            --build "$BUILD_NUMBER" \
-            --partsig-dir out
-          printf '{\n  "baseVersion": "%s",\n  "build": %s\n}\n' \
-            "$FIRMWARE_VERSION" "$BUILD_NUMBER" > flasher/observer-build-counter.json
-          echo "Build $FIRMWARE_VERSION.$BUILD_NUMBER"
-
-      - name: Unshallow for Changelog
-        run: |
-          # gen_changelog.py needs the full branch history; deepen only now, AFTER
-          # Compute Short SHA ran on the shallow clone (so its 7-char abbreviation
-          # matches build.sh's firmware filenames). Guarded so a non-shallow clone
-          # (e.g. a manual full checkout) doesn't error.
-          if [ "$(git rev-parse --is-shallow-repository)" = "true" ]; then
-            git fetch --unshallow --quiet
-          fi
-
-      - name: Generate Changelog
-        run: |
-          # Append any new branch commits to the flasher's CHANGELOG.md. This is
-          # append-only and idempotent: the hand-curated history and the hash
-          # manifest already in flasher/CHANGELOG.md are preserved, and only
-          # commits not yet listed are added. The flasher repo is the persistent
-          # store of changelog state across builds; this checkout's git history
-          # (fetch-depth: 0) is the source. changelog.html renders this file.
-          python3 scripts/gen_changelog.py flasher/CHANGELOG.md
-
-      - name: Sync Docs into Flasher
-        run: |
-          # docs.html on the flasher site serves these raw .md files and renders
-          # them client-side; keep this list in sync with LOCAL_DOCS in
-          # flasher/docs.html.
-          for f in MQTT_IMPLEMENTATION.md MQTT_SNMP.md ALERTS.md; do
-            if [ -f "$f" ]; then
-              cp -f "$f" "flasher/$f"
-              echo "synced $f"
-            else
-              echo "WARNING: source doc $f not found" >&2
-            fi
-          done
-
-      - name: Commit & Push Flasher Config
-        working-directory: flasher
-        run: |
-          # Stage everything: update-firmware.py edits config.json in place, but the
-          # slim manifests (v/*.json) and the build counter can be NEW files, which
-          # `commit -am` would miss — so add -A and check the staged diff.
-          git add -A
-          if git diff --cached --quiet; then
-            echo "No flasher changes to commit."
-            exit 0
-          fi
-          git config user.name "meshcore-bot"
-          git config user.email "noreply@gessaman.com"
-          git commit -m "Update observer firmware to ${{ steps.sha.outputs.short }} (build ${FIRMWARE_VERSION}.${{ needs.enumerate.outputs.build_number }})"
-          git push
@@ -1,300 +0,0 @@
-name: Build MQTT Observer+ Firmwares (keymind channel)
-
-# ============================================================================
-# STATUS: STAGED BUT NOT ENABLED — manual dispatch only.
-#
-# This is the experimental "plus" channel (mqtt-observer-plus = flex +
-# mcarper/keymindCascade). It mirrors build-observer-firmwares.yml with the
-# channel isolated end-to-end:
-#   - rolling release tag:   observer-mqtt-plus-latest   (NEVER share the
-#     stable tag: each workflow prunes old assets within its tag by build
-#     hash, so a shared tag would have the channels deleting each other's
-#     binaries)
-#   - firmware version:      v1.16.0-plus (filenames + embedded `ver`)
-#   - device pull-OTA:       OTA_MANIFEST_BASE overridden to .../v-plus so
-#     `ota update` on a plus node can never "update" it back onto the stable
-#     channel (the per-env platformio.ini bakes .../v; the env-injected flag
-#     below wins because PLATFORMIO_BUILD_FLAGS append after ini flags —
-#     verified by building and checking the embedded URL string)
-#
-# NOTE ON DISPATCH: GitHub does not index a workflow_dispatch-only workflow
-# that exists only on a non-default branch and has never run, so this workflow
-# will not appear in the Actions UI / `gh workflow list` (and cannot be
-# dispatched) until its push trigger fires once. That is intentional here —
-# "staged, not enabled" means nothing can fire it yet. Uncommenting the push
-# trigger below and pushing both registers it and runs the first build; from
-# then on `gh workflow run build-observer-plus-firmwares.yml --ref
-# mqtt-observer-plus` also works for manual builds.
-#
-# TO ENABLE THE CHANNEL:
-#   1. Uncomment the `push:` trigger below.
-#   2. Flip SYNC_FLASHER to "true" — but FIRST the flasher repo
-#      (agessaman/flasher.meshcore.io) needs channel support; until it does,
-#      the sync step below fails closed on purpose so the stable config.json
-#      cannot be clobbered. Flasher-side prerequisites:
-#        - update-firmware.py: a --channel/--config argument writing a
-#          plus-specific config (e.g. config-plus.json), not config.json
-#        - SPA: a channel picker (Observer / Observer+ experimental)
-#        - gen-slim-manifests.py output dir flasher/v-plus (arg already
-#          parameterized; wired below)
-#        - a plus changelog target (CHANGELOG-plus.md) — the stable
-#          CHANGELOG.md tracks the flex branch only
-#
-# Until SYNC_FLASHER is enabled, the per-base build counter has no writer, so
-# every manual dispatch publishes as build .1 — fine for hand-flashed testing
-# off the release page.
-# ============================================================================
-
-permissions:
-  contents: write
-
-on:
-  workflow_dispatch:
-  # ENABLE: uncomment to build+publish on every push to the plus branch.
-  # push:
-  #   branches:
-  #     - mqtt-observer-plus
-  #   # Keep in step with build-observer-firmwares.yml's paths-ignore.
-  #   paths-ignore:
-  #     - '**.md'
-  #     - 'docs/**'
-  #     - 'scripts/gen_changelog.py'
-  #     - '.github/**'
-  #     - '.gitignore'
-  #     - '.gitattributes'
-  #     - '.editorconfig'
-  #     - 'LICENSE'
-  #     - '.vscode/**'
-  #     - '.claude/**'
-  #     - 'mesh-america/**'
-
-# Shared with build-observer-firmwares.yml and sync-flasher-content.yml so no
-# two workflows ever push to the flasher repo at the same time.
-concurrency:
-  group: flasher-publish
-  cancel-in-progress: false
-
-env:
-  # Channel-tagged version: embedded in firmware filenames and (with the
-  # -observer tag + build number appended by build.sh) in `ver`/MQTT/SNMP.
-  FIRMWARE_VERSION: v1.16.0-plus
-  # Rolling release tag for this channel — distinct from observer-mqtt-latest.
-  RELEASE_TAG: observer-mqtt-plus-latest
-  # Channel-isolated pull-OTA manifest base baked into these binaries
-  # (overrides the .../v default from the per-env platformio.ini flags).
-  OTA_MANIFEST_BASE_URL: https://observer.gessaman.com/v-plus
-  # Fail-closed flasher-repo sync gate; see "TO ENABLE" above.
-  SYNC_FLASHER: "false"
-
-jobs:
-
-  # Discover the *_observer_mqtt envs and shard them across runners — same
-  # env set as the stable channel; only version/flags/tag differ.
-  enumerate:
-    runs-on: ubuntu-latest
-    outputs:
-      matrix: ${{ steps.split.outputs.matrix }}
-      build_number: ${{ steps.buildnum.outputs.n }}
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-
-      - name: Split observer envs into shards
-        id: split
-        shell: bash
-        run: |
-          SHARDS=14
-          ENVS=$(grep -rhoE '^\[env:[^]]*observer_mqtt\]' platformio.ini variants/*/platformio.ini \
-                 | sed -E 's/^\[env:(.*)\]$/\1/' | sort -u)
-          echo "Discovered envs:"; echo "$ENVS"
-          MATRIX=$(echo "$ENVS" | awk -v n="$SHARDS" '
-              { shard[NR % n] = shard[NR % n] " " $0 }
-              END { for (i = 0; i < n; i++) { sub(/^ /, "", shard[i]);
-                    printf "{\"idx\":%d,\"envs\":\"%s\"}\n", i, shard[i] } }' \
-              | jq -cs .)
-          echo "matrix=$MATRIX" >> "$GITHUB_OUTPUT"
-
-      - name: Compute plus-channel build number
-        id: buildnum
-        shell: bash
-        run: |
-          # Plus-channel counter, separate from the stable channel's. The
-          # flasher-sync step is the sole writer; while SYNC_FLASHER is off
-          # this 404s -> N=1 every run (documented above).
-          COUNTER_URL="https://observer.gessaman.com/observer-plus-build-counter.json"
-          CUR=$(curl -fsSL "$COUNTER_URL" 2>/dev/null || echo '{}')
-          PREV_BASE=$(echo "$CUR" | jq -r '.baseVersion // ""')
-          PREV_BUILD=$(echo "$CUR" | jq -r '.build // 0')
-          if [ "$PREV_BASE" = "$FIRMWARE_VERSION" ]; then
-            N=$((PREV_BUILD + 1))
-          else
-            N=1
-          fi
-          echo "Base $FIRMWARE_VERSION; previous build $PREV_BUILD (base $PREV_BASE) -> N=$N"
-          echo "n=$N" >> "$GITHUB_OUTPUT"
-
-  build:
-    needs: enumerate
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        shard: ${{ fromJSON(needs.enumerate.outputs.matrix) }}
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-
-      - name: Cache PlatformIO Toolchains
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.platformio/packages
-            ~/.platformio/platforms
-          key: pio-toolchains-${{ runner.os }}-${{ hashFiles('platformio.ini') }}
-          restore-keys: |
-            pio-toolchains-${{ runner.os }}-
-
-      - name: Setup Build Environment
-        uses: ./.github/actions/setup-build-environment
-
-      - name: Build Shard ${{ matrix.shard.idx }}
-        env:
-          FIRMWARE_BUILD_NUMBER: ${{ needs.enumerate.outputs.build_number }}
-          # Channel isolation for device pull-OTA: appended after the per-env
-          # ini flags, so this definition of OTA_MANIFEST_BASE wins. build.sh
-          # appends its own version/OTA_VARIANT flags to this variable.
-          PLATFORMIO_BUILD_FLAGS: -D OTA_MANIFEST_BASE='"${{ env.OTA_MANIFEST_BASE_URL }}"'
-        run: /usr/bin/env bash build.sh build-firmware ${{ matrix.shard.envs }}
-
-      - name: Upload Shard Artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: fw-plus-${{ matrix.shard.idx }}
-          path: out
-          if-no-files-found: error
-
-  release:
-    needs: [enumerate, build]
-    runs-on: ubuntu-latest
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-        # Shallow on purpose — see the stable workflow's note: build.sh named
-        # the assets from a shallow clone's 7-char short hash.
-
-      - name: Download All Shard Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts
-
-      - name: Flatten into out/
-        run: |
-          mkdir -p out
-          find artifacts -type f -name '*.bin' -exec cp -f {} out/ \;
-          find artifacts -type f -name '*.partsig' -exec cp -f {} out/ \;
-          echo "Collected binaries:"; ls -1 out
-
-      - name: Compute Short SHA
-        id: sha
-        run: echo "short=$(git rev-parse --short HEAD)" >> "$GITHUB_OUTPUT"
-
-      - name: Publish to Rolling Release (tag pinned; assets replaced in place)
-        env:
-          GH_TOKEN: ${{ github.token }}
-        run: |
-          if ! gh release view "$RELEASE_TAG" >/dev/null 2>&1; then
-            gh release create "$RELEASE_TAG" --prerelease \
-              --title "MQTT Observer+ Firmwares (experimental keymind channel)" \
-              --notes "Rolling build of the EXPERIMENTAL observer+ channel (mqtt-observer-plus = observer + mcarper keymind transmission-reliability work). Flashing between this and the stable observer channel preserves MQTT and core settings; downgrading to stable resets a handful of radio toggles (cad, fem rxgain, rx boost) and retry settings to defaults. The git short hash is embedded in each asset filename."
-          fi
-
-          gh release upload "$RELEASE_TAG" $(find out -maxdepth 1 -type f ! -name '*.partsig') --clobber
-
-          # Prune old assets within THIS tag only, retaining the most recent
-          # KEEP_BUILDS build hashes (same logic + rationale as the stable
-          # workflow: a flasher tab opened mid-cycle must not 404).
-          KEEP_BUILDS=2
-          keep_hashes=$(gh release view "$RELEASE_TAG" --json assets \
-              -q '.assets[] | "\(.createdAt) \(.name)"' \
-            | sort -r \
-            | while read -r _ts name; do
-                printf '%s' "$name" | grep -oiE '[0-9a-f]{7,40}(-merged)?\.bin$' | grep -oiE '^[0-9a-f]{7,40}'
-              done \
-            | awk '!seen[$0]++' | head -n "$KEEP_BUILDS")
-          echo "Retaining build hashes:"; echo "$keep_hashes"
-          gh release view "$RELEASE_TAG" --json assets -q '.assets[].name' \
-            | while read -r asset; do
-                ah=$(printf '%s' "$asset" | grep -oiE '[0-9a-f]{7,40}(-merged)?\.bin$' | grep -oiE '^[0-9a-f]{7,40}' || true)
-                if [ -n "$ah" ] && grep -qxF "$ah" <<<"$keep_hashes"; then
-                  continue
-                fi
-                gh release delete-asset "$RELEASE_TAG" "$asset" --yes || true
-              done
-
-      # ----------------------------------------------------------------------
-      # Flasher-repo sync: OFF until the flasher supports channels (see header).
-      # Fails closed if enabled prematurely so the stable config.json can never
-      # be clobbered by this channel.
-      # ----------------------------------------------------------------------
-      - name: Checkout Flasher Repo
-        if: env.SYNC_FLASHER == 'true'
-        uses: actions/checkout@v4
-        with:
-          repository: agessaman/flasher.meshcore.io
-          token: ${{ secrets.FLASHER_DISPATCH_TOKEN }}
-          path: flasher
-
-      - name: Update Flasher Config (plus channel)
-        if: env.SYNC_FLASHER == 'true'
-        run: |
-          # FAIL-CLOSED GUARD: running update-firmware.py as-is would rewrite
-          # the STABLE channel's config.json. Replace this block with the
-          # channel-aware invocation once the flasher repo supports it, e.g.:
-          #   python3 flasher/scripts/update-firmware.py \
-          #     --config flasher/config-plus.json \
-          #     "${{ steps.sha.outputs.short }}" "$GITHUB_WORKSPACE/firmware-notes.html"
-          echo "ERROR: flasher repo has no plus-channel support yet (see workflow header)." >&2
-          exit 1
-
-      - name: Generate Slim Per-Variant Manifests + Persist Build Counter (plus channel)
-        if: env.SYNC_FLASHER == 'true'
-        env:
-          BUILD_NUMBER: ${{ needs.enumerate.outputs.build_number }}
-        run: |
-          # Channel-isolated manifest namespace: these are what OTA_MANIFEST_BASE_URL
-          # points plus binaries at, so `ota update` stays within the channel.
-          python3 flasher/scripts/gen-slim-manifests.py \
-            --config flasher/config-plus.json \
-            --out-dir flasher/v-plus \
-            --base-version "$FIRMWARE_VERSION" \
-            --build "$BUILD_NUMBER" \
-            --partsig-dir out
-          printf '{\n  "baseVersion": "%s",\n  "build": %s\n}\n' \
-            "$FIRMWARE_VERSION" "$BUILD_NUMBER" > flasher/observer-plus-build-counter.json
-          echo "Build $FIRMWARE_VERSION.$BUILD_NUMBER"
-
-      - name: Generate Changelog (plus channel)
-        if: env.SYNC_FLASHER == 'true'
-        run: |
-          if [ "$(git rev-parse --is-shallow-repository)" = "true" ]; then
-            git fetch --unshallow --quiet
-          fi
-          # Plus channel keeps its own changelog; the stable CHANGELOG.md
-          # tracks the flex branch only.
-          python3 scripts/gen_changelog.py flasher/CHANGELOG-plus.md
-
-      # (No docs sync: the stable channel owns the flasher's docs pages.)
-
-      - name: Commit & Push Flasher Config
-        if: env.SYNC_FLASHER == 'true'
-        working-directory: flasher
-        run: |
-          git add -A
-          if git diff --cached --quiet; then
-            echo "No flasher changes to commit."
-            exit 0
-          fi
-          git config user.name "meshcore-bot"
-          git config user.email "noreply@gessaman.com"
-          git commit -m "Update observer+ firmware to ${{ steps.sha.outputs.short }} (build ${FIRMWARE_VERSION}.${{ needs.enumerate.outputs.build_number }})"
-          git push
@@ -10,33 +10,8 @@ on:
      - 'repeater-*'

 jobs:
-
-  build:
-    runs-on: ubuntu-latest
-    steps:
-
-      - name: Clone Repo
-        uses: actions/checkout@v6
-
-      - name: Setup Build Environment
-        uses: ./.github/actions/setup-build-environment
-
-      - name: Build Firmwares
-        env:
-          FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }}
-        run: /usr/bin/env bash build.sh build-repeater-firmwares
-
-      - name: Upload Workflow Artifacts
-        uses: actions/upload-artifact@v7
-        with:
-          name: repeater-firmwares
-          path: out
-
-      - name: Create Release
-        uses: softprops/action-gh-release@v3
-        if: startsWith(github.ref, 'refs/tags/')
-        with:
-          name: Repeater Firmware ${{ env.GIT_TAG_VERSION }}
-          body: ""
-          draft: true
-          files: out/*
+  build-repeater-firmwares:
+    uses: ./.github/workflows/firmware-builder.yml
+    with:
+      firmware_type: 'repeater'
+      release_title_prefix: 'Repeater Firmware'
@@ -10,33 +10,8 @@ on:
      - 'room-server-*'

 jobs:
-
-  build:
-    runs-on: ubuntu-latest
-    steps:
-
-      - name: Clone Repo
-        uses: actions/checkout@v6
-
-      - name: Setup Build Environment
-        uses: ./.github/actions/setup-build-environment
-
-      - name: Build Firmwares
-        env:
-          FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }}
-        run: /usr/bin/env bash build.sh build-room-server-firmwares
-
-      - name: Upload Workflow Artifacts
-        uses: actions/upload-artifact@v7
-        with:
-          name: room-server-firmwares
-          path: out
-
-      - name: Create Release
-        uses: softprops/action-gh-release@v3
-        if: startsWith(github.ref, 'refs/tags/')
-        with:
-          name: Room Server Firmware ${{ env.GIT_TAG_VERSION }}
-          body: ""
-          draft: true
-          files: out/*
+  build-room-server-firmwares:
+    uses: ./.github/workflows/firmware-builder.yml
+    with:
+      firmware_type: 'room-server'
+      release_title_prefix: 'Room Server Firmware'
@@ -0,0 +1,90 @@
+name: Firmware Builder
+
+on:
+  workflow_call:
+    inputs:
+      firmware_type:
+        required: true
+        type: string
+      release_title_prefix:
+        required: true
+        type: string
+
+jobs:
+
+  generate-build-matrix:
+    runs-on: ubuntu-latest
+    outputs:
+      targets: ${{ steps.get-build-targets.outputs.targets }}
+    steps:
+
+      - name: Clone Repo
+        uses: actions/checkout@v6
+
+      - name: Setup Build Environment
+        uses: ./.github/actions/setup-build-environment
+
+      - name: Get Build Targets
+        id: get-build-targets
+        run: |
+          # get list of firmwares to build
+          TARGET_LIST=$(/usr/bin/env bash build.sh get-${{ inputs.firmware_type }}-firmwares-to-build)
+          
+          # convert targets separated by new line into a json array string
+          JSON_ARRAY=$(echo "$TARGET_LIST" | jq -R -s -c 'split("\n") | map(select(length > 0))')
+          
+          # use json array as targets result
+          echo "targets=$JSON_ARRAY" >> $GITHUB_OUTPUT
+
+  build:
+    needs: generate-build-matrix
+    runs-on: ubuntu-latest
+    continue-on-error: true # don't fail entire build if one board fails to build
+    strategy:
+      matrix:
+        target: ${{ fromJson(needs.generate-build-matrix.outputs.targets) }}
+      fail-fast: false # don't cancel other builds if one board fails to build
+    steps:
+
+      - name: Clone Repo
+        uses: actions/checkout@v6
+
+      - name: Setup Build Environment
+        uses: ./.github/actions/setup-build-environment
+
+      - name: Build Firmware
+        env:
+          FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }}
+        run: /usr/bin/env bash build.sh build-firmware ${{ matrix.target }}
+
+      - name: Upload Workflow Artifacts
+        uses: actions/upload-artifact@v7
+        with:
+          name: "${{ matrix.target }}"
+          path: out
+
+  create-release:
+    needs: build
+    runs-on: ubuntu-latest
+    if: startsWith(github.ref, 'refs/tags/') # only create release for tagged builds
+    steps:
+
+      - name: Clone Repo
+        uses: actions/checkout@v6
+
+      - name: Setup Build Environment
+        uses: ./.github/actions/setup-build-environment
+
+      - name: Download All Artifacts
+        uses: actions/download-artifact@v8
+        with:
+          merge-multiple: true
+          path: out
+
+      - name: Create Release
+        uses: softprops/action-gh-release@v3
+        with:
+          name: "${{ inputs.release_title_prefix }} ${{ env.GIT_TAG_VERSION }}"
+          body: ""
+          draft: true
+          files: out/*
@@ -31,8 +31,11 @@ jobs:
          - Heltec_v3_room_server
          # nRF52
          - RAK_4631_companion_radio_ble
+          - RAK_4631_companion_radio_ethernet
          - RAK_4631_repeater
+          - RAK_4631_repeater_ethernet
          - RAK_4631_room_server
+          - RAK_4631_room_server_ethernet
          # RP2040
          - PicoW_repeater
          # STM32
@@ -20,7 +20,7 @@ jobs:
        uses: ./.github/actions/setup-build-environment

      - name: Run Unit Tests
-        run: pio test -e native -vv
+        run: pio test -e native -e native_kiss_modem -vv

      - name: Upload Test Results
        # Upload test results even if the test step failed.
@@ -1,76 +0,0 @@
-name: Sync Flasher Docs & Changelog
-
-# Pushes the observer docs and the regenerated changelog to the flasher site
-# WITHOUT rebuilding firmware. Companion to build-observer-firmwares.yml:
-#   - code changes        -> build-observer-firmwares.yml (builds + syncs everything)
-#   - doc / markdown edits -> this workflow (fast sync only, no firmware rebuild)
-# Keep the synced file list and trigger paths in step with the build workflow's
-# "Sync Docs into Flasher" step and with LOCAL_DOCS in flasher/docs.html.
-
-permissions:
-  contents: read
-
-on:
-  workflow_dispatch:
-  push:
-    branches:
-      - mqtt-bridge-implementation-flex
-    paths:
-      - '**.md'
-      - 'docs/**'
-      - 'scripts/gen_changelog.py'
-
-# Shared with build-observer-firmwares.yml so the two never push to the flasher
-# repo concurrently (a mixed code+docs commit can trigger both).
-concurrency:
-  group: flasher-publish
-  cancel-in-progress: false
-
-jobs:
-  sync:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Clone Repo
-        uses: actions/checkout@v4
-        with:
-          # full history so scripts/gen_changelog.py can read the branch commit log
-          fetch-depth: 0
-
-      - name: Checkout Flasher Repo
-        uses: actions/checkout@v4
-        with:
-          repository: agessaman/flasher.meshcore.io
-          token: ${{ secrets.FLASHER_DISPATCH_TOKEN }}
-          path: flasher
-
-      - name: Sync Docs into Flasher
-        run: |
-          # docs.html on the flasher site serves these raw .md files and renders
-          # them client-side; keep this list in sync with LOCAL_DOCS in
-          # flasher/docs.html and the build workflow's sync step.
-          for f in MQTT_IMPLEMENTATION.md MQTT_SNMP.md ALERTS.md; do
-            if [ -f "$f" ]; then
-              cp -f "$f" "flasher/$f"
-              echo "synced $f"
-            else
-              echo "WARNING: source doc $f not found" >&2
-            fi
-          done
-
-      - name: Generate Changelog
-        run: |
-          # Append-only and idempotent; preserves the hand-curated history and
-          # hash manifest already in flasher/CHANGELOG.md. changelog.html renders it.
-          python3 scripts/gen_changelog.py flasher/CHANGELOG.md
-
-      - name: Commit & Push Flasher Content
-        working-directory: flasher
-        run: |
-          if git diff --quiet; then
-            echo "No flasher changes to commit."
-            exit 0
-          fi
-          git config user.name "meshcore-bot"
-          git config user.email "noreply@gessaman.com"
-          git commit -am "Sync docs & changelog from MeshCore ${GITHUB_SHA::7}"
-          git push
@@ -5,9 +5,6 @@
 .vscode/launch.json
 .vscode/ipch
 out/
-# Local firmware archives and build logs
-out.*/
-build-logs/
 .direnv/
 .DS_Store
 .vscode/settings.json
@@ -19,11 +16,4 @@ cmake-*
 compile_commands.json
 .venv/
 venv/
-# Script-generated cert bundles (see scripts/generate_cert_bundle.py)
-src/certs/x509_crt_bundle.bin
-ssl_certs/cacert.pem
 platformio.local.ini
-.cursor/*
-.claude/*
-.cursorrules
-__pycache__/
@@ -1,115 +0,0 @@
-# Fault Alerts (Group Channel)
-
-This document describes MeshCore repeater fault alerts, including configuration, CLI commands, and operational behavior.
-
-The repeater can broadcast a one-line fault notification on a configured group channel when WiFi or any active MQTT slot has been disconnected longer than a configurable threshold.
-
-The alert is sent over **LoRa** as a `PAYLOAD_TYPE_GRP_TXT` flood packet on the configured channel (with sender = device name) - *not* over MQTT. This is intentional: the MQTT path is what's broken, so the only working delivery is the mesh itself. Anyone in radio range subscribed to the same channel/hashtag in their companion app will see the alert inline with normal channel chat.
-
-> **A small list of community channels is intentionally NOT supported.** Fault alerts are operator-infrastructure noise - broadcasting them on shared community channels would spam every node in the area (and on `#test` / `#bot` would amplify via well-known auto-responders). The currently banned destinations are:
->
-> - The well-known **Public** group PSK (`izOH6cXN6mrJ5e26oRXNcg==`)
-> - **`#test`** (`sha256("#test")[0..15]`)
-> - **`#bot`** (`sha256("#bot")[0..15]`)
->
-> The list lives in `BANNED_ALERT_CHANNELS[]` in [src/helpers/AlertReporter.cpp](src/helpers/AlertReporter.cpp); adding a new entry is one line (label + 32 hex chars). The matcher runs at both the CLI validation step (`set alert.psk`, `set alert.hashtag`) and the alert-send path, so a saved-config bypass is still refused at runtime. You must point alerts at a **private PSK** (`set alert.psk`) or a non-banned **hashtag channel** (`set alert.hashtag`) before alerts can fire.
-
-## Scope and routing
-
-Alert floods ride the **repeater's default scope** by default (the same TransportKey used for adverts and channel broadcasts - set via `region default ...`). Operators can override on a per-alert-feature basis with `set alert.region <name>`:
-
- If `alert.region` is set and the name resolves via `RegionMap`, that region's TransportKey is used.
- If `alert.region` is unset, or the name doesn't resolve, the repeater's `default_scope` is used.
- If both are null, the alert is sent unscoped (matches the pre-scoped firmware's behavior).
-
-`alert.region` is stored as-is - it does **not** create the region. Use `region put <name>` first if it doesn't exist.
-
-## What triggers an alert
-
- **WiFi**: continuously down for at least `alert.wifi` minutes (default 30)
- **MQTT slot N**: enabled, has connected at least once since boot, and has been disconnected for at least `alert.mqtt` minutes (default 240, i.e. 4 h)
-
-A "recovered" message is sent once when the underlying connection comes back. After firing, a fault is rate-limited by `alert.interval` (default 60 minutes) before it can re-fire - this prevents flapping links from spamming the channel.
-
-## Defaults
-
-| Setting | Default | Notes |
-|---------|---------|-------|
-| `alert` | `off` | Master enable for automatic fault alerts |
-| `alert.psk` | *(unset)* | Private channel secret as **32 hex chars** (16-byte channel key) - the same format the mobile app's "Share Channel" emits, and what every other secret-shaped CLI command (e.g. `prv.key`) uses. |
-| `alert.hashtag` | *(unset)* | Informational only; set via `set alert.hashtag` to pre-derive `alert.psk` from `sha256("#name")[0..15]`. Cleared when `alert.psk` is set directly. |
-| `alert.region` | *(unset)* | Optional region name; overrides the repeater's `default_scope` for alert sends only. Empty = use `default_scope`. Looked up lazily via `RegionMap`; unknown names silently fall back to `default_scope`. |
-| `alert.wifi` | `30` (min) | 0 disables WiFi alerts |
-| `alert.mqtt` | `240` (min) | 0 disables MQTT alerts |
-| `alert.interval` | `60` (min) | Minutes between repeat alerts of the same fault. **Hard floor of 60 min** so a flapping link can't spam the mesh; the CLI rejects lower values and AlertReporter clamps stale prefs at runtime. |
-
-> `alert.psk` is unset on a fresh flash. **Alerts cannot fire and `alert test` will refuse to send until you configure either `alert.psk` directly or `alert.hashtag` (which derives one).** The sender shown on outgoing alert messages is always the node name (`set name ...`); there is no separate `alert.name`.
-
-## CLI
-
-Get:
- `get alert` - master on/off
- `get alert.psk` - the active 32-hex-char PSK (or `(unset)`) (**serial console only**)
- `get alert.hashtag` - the originating hashtag (or `(unset)`, e.g. after `set alert.psk` overrides the hashtag-derived key)
- `get alert.region` - alert-only scope override (or `(unset, using default scope)`)
- `get alert.wifi` / `get alert.mqtt` / `get alert.interval`
-
-Set:
- `set alert on` / `set alert off`
- `set alert.psk <hex>` - 32 hex chars (16-byte channel secret); rejects banned channels (Public, `#test`, `#bot`). Paste the mobile app's "Share Channel" output as-is. Clears `alert.hashtag` since the new key is operator-supplied.
- `set alert.psk` (no argument) - clears both `alert.psk` and `alert.hashtag`
- `set alert.hashtag <name>` - derives the 16-byte key from `sha256("#name")` *once*, stores it as `alert.psk`, and remembers the hashtag for `get alert.hashtag`. `#` prefix is added if omitted (so `alerts` and `#alerts` are equivalent). Refuses banned hashtag names.
- `set alert.hashtag` (no argument) - clears both `alert.psk` and `alert.hashtag`
- `set alert.region <name>` - alert-only scope override (no region-map mutation; unknown names silently fall back to `default_scope`)
- `set alert.region` (no argument) - clear override, use `default_scope`
- `set alert.wifi <minutes>` (0-1440; 0 = disabled)
- `set alert.mqtt <minutes>` (0-10080; 0 = disabled)
- `set alert.interval <minutes>` (60-10080; 60-minute floor to protect mesh airtime)
-
-Action:
- `alert test` - send a one-off `[test] alert channel ok` immediately on the configured channel; ignores `alert on/off` so operators can verify the channel before enabling fault firing. Returns an error if no channel is configured.
- `alert test <message>` - send a custom test message: `[test] <message>`.
-
-## Example: dedicated hashtag channel (recommended for operator groups)
-
-```bash
-set alert.hashtag ops-alerts   # stored as "#ops-alerts"; key = sha256("#ops-alerts")[0..15]
-set alert.wifi 10              # tighter for ops monitoring
-set alert.mqtt 60
-set alert on
-alert test
-```
-
-Anyone running a companion app and subscribed to the `#ops-alerts` hashtag channel will see the alerts inline.
-
-## Example: dedicated alerts channel with a private PSK
-
-Generate a 16-byte random PSK as 32 hex chars (`openssl rand -hex 16`), or use the companion app's "Add channel" feature and copy the "Share Channel" output. Then:
-
-```bash
-set alert.psk <32_hex_chars>   # 16-byte channel secret; mobile "Share Channel" pastes in directly
-set alert.wifi 10
-set alert.mqtt 60
-set alert on
-alert test
-```
-
-Subscribers running a MeshCore companion app should add a channel with the same PSK; alerts will appear in that channel's chat view. (Pick any local name for it - the sender of incoming alert messages is the repeater's node name.)
-
-## Sample messages
-
-```
-MyObserver: WiFi down 47m (reason 201)
-MyObserver: WiFi recovered after 1h3m
-MyObserver: MQTT slot 1 (analyzer-us) down 4h12m
-MyObserver: MQTT slot 1 (analyzer-us) recovered after 4h45m
-```
-
-## Notes
-
- A reboot during an outage resets the timer; the alert won't double-fire because `millis()` starts at 0 at boot. The fault must persist `alert.wifi` / `alert.mqtt` minutes from boot.
- Fault state is stored in RAM only - no persistence across reboots.
- The MQTT-slot watcher uses a separate per-slot `current_outage_started_ms` field that is reset on each reconnect, distinct from the `first_disconnect_time` shown in `mqttN.diag` (which remains a "first disconnect since boot" counter for diagnostics).
- WiFi-down alerts can only be delivered if the LoRa radio is up. There is no fallback path.
- Banned channels (Public, `#test`, `#bot`) are **rejected** at both `set alert.psk` / `set alert.hashtag` and at the alert-send path, so even if you somehow set one via a saved config file, the firmware will silently refuse to broadcast on it. To add another banned channel, append a row to `BANNED_ALERT_CHANNELS[]` in [src/helpers/AlertReporter.cpp](src/helpers/AlertReporter.cpp); the format is `{ "label", "32-lowercase-hex-chars" }` (compute as `printf '#name' | openssl dgst -sha256 | cut -c1-32`).
- Alerts are sent via `sendFlood` with the resolved TransportKey codes attached, so they appear on the configured scope just like other broadcast traffic. Operators monitoring a specific region need to be subscribed to that region's scope to hear alerts.
@@ -1,255 +0,0 @@
-# MeshCore Observer — Changelog
-
-Changes to the MQTT observer / bridge work that powers the firmware offered on
-[flasher.meshcore.io](https://flasher.meshcore.io). Newest changes are at the top.
-
-**Legend:** **New** = new capability · **Fix** = bug fix · **Improvement** = enhancement to
-existing behavior · **Internal** = refactor / under-the-hood · **Docs** = documentation ·
-**Build** / **CI** = build system & automation. **⬆ Upstream sync** marks a merge of the
-upstream MeshCore `dev` branch, which generally pulls in a new MeshCore software version.
-
-### June 2026
-
- **New** — AlertReporter integration in MyMesh for Room Server <sub>2026-06-17 · `985fda13`</sub>
- **Improvement** — Cumulative packet statistics (`packets_sent` / `packets_received`) added to the status message  <sub>2026-06-16 · `8bf590b1`</sub>
- **Improvement** — Packet path now published as an array of lowercase hex hop tokens  <sub>2026-06-16 · `e80a5ded`</sub>
- **CI** — Sync documentation files to the flasher site from the build workflow  <sub>2026-06-16 · `0844eee1`</sub>
- **CI** — Reworked the GitHub Actions workflow for rolling releases  <sub>2026-06-08 · `8fa38707`</sub>
- **New** — Radio Watchdog feature for the MQTT observer  <sub>2026-06-08 · `002e8d4a`</sub>
- **Improvement** — Firmware build-date format and UTC timestamps (always emit `+00:00`)  <sub>2026-06-06 · `b45373a3`</sub>
- **CI** — Build observer firmwares across 14 shards (up from 4)  <sub>2026-06-06 · `c29ede05`</sub>
- **CI** — Cache PlatformIO toolchains in CI  <sub>2026-06-06 · `6723776f`</sub>
- **CI** — Automated firmware builds via GitHub Actions  <sub>2026-06-06 · `981ed246`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev (brings MeshCore v1.16.0)  <sub>2026-06-06 · `dcc8f826`</sub>
-
-### May 2026
-
- **New** — NZ Analyzer MQTT preset  <sub>2026-05-25 · `c0c845f5`</sub>
- **Internal** — Region definition helpers; docs refresh  <sub>2026-05-21 · `1296aa77`</sub>
- **Docs** — Clarified WiFi configuration instructions (password optional for open networks)  <sub>2026-05-21 · `38568eb1`</sub>
- **Improvement** — Alert PSK access now restricted by sender timestamp  <sub>2026-05-17 · `f717d673`</sub>
- **Docs** — Trimmed the fault-alert section in the implementation guide  <sub>2026-05-17 · `c41805d0`</sub>
- **Change** — Renamed CLI command `region bulk` → `region def`  <sub>2026-05-16 · `f3c6c348`</sub>
- **Internal** — Timestamp handling in MQTTMessageBuilder  <sub>2026-05-15 · `5a004f37`</sub>
- **New** — T-LoRa V2.1–1.6 observer configurations  <sub>2026-05-13 · `3cde9c10`</sub>
- **Fix** · `mqtt` — Hardened the T-LoRa MQTT observer and trimmed MQTT task stack usage  <sub>2026-05-13 · `daf9ee47`</sub>
- **Internal** — Alert PSK handling is now hex-only  <sub>2026-05-12 · `a8668840`</sub>
- **Improvement** — Alert PSK accepts both base64 and hex  <sub>2026-05-12 · `a865d0a3`</sub>
- **New** · `cli` — Bulk region hierarchy command  <sub>2026-05-12 · `19f95001`</sub>
- **Improvement** — Path hash size included in AlertReporter flood messages  <sub>2026-05-11 · `6a3ed5d4`</sub>
- **New** — T-Beam 1W observer support and partition handling  <sub>2026-05-11 · `fc99d6b3`</sub>
- **Improvement** — Fault alerts gained region-based scoping and banned channels  <sub>2026-05-11 · `16dc49fa`</sub>
- **New** — Fault alerts for WiFi and MQTT disconnections  <sub>2026-05-10 · `80355f32`</sub>
- **New** — ColoradoMesh MQTT preset  <sub>2026-05-10 · `08847342`</sub>
- **New** — MQTT origin handling and a string utility  <sub>2026-05-09 · `b9f478c9`</sub>
- **Improvement** — Repeat status included in the MQTT status message  <sub>2026-05-09 · `303cf8c2`</sub>
- **Internal** — MQTT origin now uses effective-origin logic  <sub>2026-05-09 · `ff031f48`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-05-09 · `b37db668`</sub>
- **New** · `mqtt` — T-LoRa V2.1-1.6 observer environments  <sub>2026-05-02 · `78e1500a`</sub>
-
-### April 2026
-
- **Fix** · `mqtt` — Corrected ColoradoMesh preset details  <sub>2026-04-30 · `9f8f2d05`</sub>
- **New** · `platformio` — PSRAM support for the TBeam Supreme SX1262 variant  <sub>2026-04-28 · `0b05aede`</sub>
- **New** · `mqtt` — ColoradoMesh preset  <sub>2026-04-28 · `457edf69`</sub>
- **Fix** · `mqtt` — Added missing MQTTBridge error codes  <sub>2026-04-27 · `5a5e5373`</sub>
- **New** · `mqtt` — EastIdahoMesh preset and richer CLI preset listing  <sub>2026-04-25 · `753eb72f`</sub>
- **Fix** · `mqtt` — Removed errant `clearLastWill` from PsychicMqttClient  <sub>2026-04-25 · `32449e62`</sub>
- **Fix** · `mqtt` — Restored `origin` field position in packet messages  <sub>2026-04-25 · `673361b6`</sub>
- **Internal** · `mqtt` — Reorganized packet message structure  <sub>2026-04-25 · `8be27e4e`</sub>
- **Internal** · `mqtt` — Default TX packet settings and documentation  <sub>2026-04-25 · `bfcf0176`</sub>
- **New** · `platformio` — MQTT observer configs for the Heltec V4 expansion kit  <sub>2026-04-24 · `0a4f002f`</sub>
- **New** · `cli` — Radio watchdog command  <sub>2026-04-24 · `7b21be3e`</sub>
- **Internal** · `mqtt` — Standardized MQTT preset formatting  <sub>2026-04-24 · `6211885c`</sub>
- **Internal** · `heltec_tracker_v2` — Aligned FEM with meshcore-dev KCT8103L  <sub>2026-04-24 · `0d280257`</sub>
- **New** · `heltec_tracker_v2` — Restored LoRaFEMControl for GC1109  <sub>2026-04-24 · `255fce7f`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-04-24 · `c1989d6f`</sub>
- **New** · `mqtt` — chimesh and meshat.se presets  <sub>2026-04-24 · `ee4e39bc`</sub>
- **Fix** · `mqtt` — Restored legacy outbox behavior for QoS0 async publishes  <sub>2026-04-23 · `70722a58`</sub>
- **Fix** · `mqtt` — Config marked dirty on setter calls; applied on connect/reconnect  <sub>2026-04-23 · `bb67b04e`</sub>
- **Improvement** · `mqtt` — Better QoS handling and retry logic  <sub>2026-04-23 · `7d0c5bce`</sub>
- **Internal** · `mqtt` — Removed legacy `mqtt.server`/`port`/`username`/`password` CLI  <sub>2026-04-21 · `cfec3a5b`</sub>
- **Fix** · `mqtt` — Legacy CLI aligned with slot prefs; restored `isConfigValid`  <sub>2026-04-21 · `ac2662c5`</sub>
- **Internal** — PsychicMqttClient memory management; fixed-size callback arrays (v0.2.2)  <sub>2026-04-21 · `e9ff1ae0`</sub>
- **Improvement** — MQTTBridge memory management, deferred logging, and QoS on publish  <sub>2026-04-19 · `1ff9437f`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-04-19 · `563d9a7d`</sub>
- **Build** — Disabled MQTT debug config for heltec_v4 builds  <sub>2026-04-17 · `0ed29cb7`</sub>
- **Change** — gitignore generated cert files; meshmapper timeout reset to 0  <sub>2026-04-17 · `ab121708`</sub>
- **Change** — MeshMapper preset update; removed generated cert files  <sub>2026-04-17 · `074ac3e7`</sub>
- **Improvement** — Critical heap monitoring and deferred TLS; hard restart on prolonged low memory  <sub>2026-04-17 · `f4a4fd7c`</sub>
- **Internal** — Inline `StaticJsonDocument` allocations to reduce heap fragmentation  <sub>2026-04-16 · `ab6685a1`</sub>
- **New** — nashmesh preset  <sub>2026-04-14 · `13fbcd91`</sub>
- **Internal** — MQTTMessageBuilder takes an external JsonDocument to cut stack usage  <sub>2026-04-14 · `ff2df2b7`</sub>
- **Internal** — Removed the raw-data mutex in favor of core-specific staging  <sub>2026-04-14 · `0c190dac`</sub>
- **Improvement** — Radio watchdog avoids false alarms in quiet meshes  <sub>2026-04-14 · `961f8293`</sub>
- **New** — Radio diagnostics in MyMesh and CommonCLI  <sub>2026-04-10 · `7e4f75c9`</sub>
- **Improvement** — Internal heap stats in status messages  <sub>2026-04-06 · `74e45a79`</sub>
- **New** — TennMesh preset (fixed username/password auth)  <sub>2026-04-05 · `3b46e9ee`</sub>
- **Docs** — Single `set radio` command in the guide  <sub>2026-04-04 · `1c524a93`</sub>
- **Internal** — RX/TX packet logging controlled by MQTT settings (`mqtt_rx_enabled` pref)  <sub>2026-04-04 · `47b632aa`</sub>
- **Improvement** — Runtime-configurable MQTT slot limits based on PSRAM  <sub>2026-04-04 · `258a0d72`</sub>
- **Improvement** — Disconnect count/time diagnostics; per-variant WiFi TX power  <sub>2026-04-02 · `f0962eff`</sub>
-
-### March 2026
-
- **Improvement** — Pre-allocated status JSON buffer in PSRAM; non-blocking NTP refresh  <sub>2026-03-31 · `cf4ec3f6`</sub>
- **New** — WiFi disconnect diagnostics  <sub>2026-03-31 · `0e82271e`</sub>
- **Fix** — Audience command parsing handles the 9-character prefix  <sub>2026-03-30 · `a4324a83`</sub>
- **New** — JWT audience configuration for custom slots  <sub>2026-03-30 · `1263e71d`</sub>
- **Improvement** — Partition-table guidance, merged-firmware flashing, embedded CA bundle  <sub>2026-03-30 · `da775bb2`</sub>
- **Docs** — Removed obsolete MQTT design docs  <sub>2026-03-28 · `384b80fc`</sub>
- **Docs** — README links to the MQTT Implementation Guide  <sub>2026-03-28 · `ff49d28f`</sub>
- **New** — Optional SNMP monitoring; concurrent MQTT slots 3 → 5  <sub>2026-03-28 · `202acacf`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-03-28 · `cc17c6b7`</sub>
- **New** — meshomatic preset; disable slots with no server configured  <sub>2026-03-27 · `3eacf56e`</sub>
- **Improvement** — Pre-allocated JSON publish buffer in PSRAM  <sub>2026-03-26 · `47dd2182`</sub>
- **New** — `reconnect()` added to PsychicMqttClient  <sub>2026-03-25 · `1b5884bd`</sub>
- **Improvement** — Lightweight JWT reconnect (token refresh without full teardown)  <sub>2026-03-25 · `af52a989`</sub>
- **Internal** — Full teardown/setup for JWT slots on reconnect  <sub>2026-03-24 · `e29c3d96`</sub>
- **Internal** — Standardized MQTT slot log format  <sub>2026-03-24 · `2bbca206`</sub>
- **New** — cascadiamesh preset; keepalive configuration  <sub>2026-03-24 · `eaf5fcbc`</sub>
- **Improvement** — Re-create JWT tokens when NTP reveals stale time  <sub>2026-03-24 · `1c98d1c6`</sub>
- **Internal** — Serial-availability checks before logging; circuit-breaker reconnect logic  <sub>2026-03-23 · `4a60f166`</sub>
- **New** — MeshRank preset (token auth, custom topic templates)  <sub>2026-03-22 · `95874f0c`</sub>
- **Fix** — Dynamic MQTTBridge allocation to avoid an ESP32 static-init crash  <sub>2026-03-21 · `c67fb12b`</sub>
- **Build** — Build script: cached project config, artifact handling, ESP32 binary merge  <sub>2026-03-21 · `bf8a3a7a`</sub>
- **Improvement** — Active connection slots limited by available memory (PSRAM-aware)  <sub>2026-03-20 · `542f8a31`</sub>
- **New** — Up to 3 configurable connection slots with built-in presets (LetsMesh US/EU, MeshMapper)  <sub>2026-03-20 · `b43e9618`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-03-20 · `abe6e046`</sub>
- **Change** — Stopped enabling MQTT analyzer servers by default in the example sketches  <sub>2026-03-07 · `304719e8`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-03-06 · `db8b4419`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-03-04 · `56ac85fa`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-03-03 · `dcbbe5a6`</sub>
-
-### February 2026
-
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev (Packet.cpp fix)  <sub>2026-02-26 · `8b359452`</sub>
- **Internal** — Multibyte path handling in Packet / MQTTMessageBuilder  <sub>2026-02-25 · `c8e220b1`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-02-25 · `51e9907f`</sub>
- **Change** — Removed an unused preprocessor directive in MyMesh  <sub>2026-02-25 · `ee1a9b4a`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-02-24 · `397a48fc`</sub>
- **Improvement** — Keepalive set to 45s to hold WebSocket connections through Cloudflare  <sub>2026-02-16 · `2d4b7a64`</sub>
- **Build** — heltec_v4 uses the `heltec_v4_oled` config for observer / room-server  <sub>2026-02-16 · `88ce0d33`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-02-15 · `e89cbee8`</sub>
- **Improvement** — Simplified KISS noise-floor sampling  <sub>2026-02-07 · `776131e2`</sub>
- **Fix** · `kiss_modem` — Improved RX delivery and noise-floor sampling  <sub>2026-02-06 · `f445b5ac`</sub>
- **Improvement** — Better NTP synchronization in MQTTBridge  <sub>2026-02-06 · `ba4243b5`</sub>
- **Improvement** — WiFi management and fragmentation recovery  <sub>2026-02-04 · `26aaace9`</sub>
- **New** — PSRAM-backed memory management in MQTTBridge  <sub>2026-02-04 · `1d0d33f9`</sub>
- **New** — PSRAM diagnostics at MQTTBridge init  <sub>2026-02-04 · `abcfe609`</sub>
- **Build** — mbedTLS configuration tuned across variants  <sub>2026-02-04 · `21158e1f`</sub>
- **Fix** · `kiss` — Periodic noise-floor calibration and AGC reset  <sub>2026-02-03 · `0fb57033`</sub>
- **Fix** — Memory use and status reporting in the MQTT bridge  <sub>2026-02-02 · `498566e6`</sub>
-
-### January 2026
-
- **Internal** — Clarified packet ownership / memory management in MQTTBridge  <sub>2026-01-31 · `f91b715e`</sub>
- **New** — `recv_errors` in the `CMD_GET_STATS` packets response  <sub>2026-01-29 · `019bbf74`</sub>
- **New** — Receive-error tracking in Dispatcher and the message builder  <sub>2026-01-29 · `ee577314`</sub>
- **Fix** — Display header include for heltec_v4 when `DISPLAY_CLASS` is set directly  <sub>2026-01-27 · `bb27cded`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-01-27 · `d96c900f`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-01-26 · `2a84e58b`</sub>
- **Improvement** — MQTTBridge memory usage and NTP handling  <sub>2026-01-24 · `9e1ce23e`</sub>
- **Improvement** — MQTTBridge status handling and publish logic  <sub>2026-01-23 · `c67c3295`</sub>
- **Internal** — MQTTBridge connection handling for stability / responsiveness  <sub>2026-01-22 · `c055228c`</sub>
- ⬆ **Upstream sync** — Synced with upstream MeshCore dev  <sub>2026-01-21 · `39ba020f`</sub>
- **Internal** — MQTTBridge moved onto a FreeRTOS task for responsiveness  <sub>2026-01-21 · `ed27ebd0`</sub>
- **New** — Configurable WiFi power-save mode preference  <sub>2026-01-18 · `56f98997`</sub>
- **Internal** — HeltecTrackerV2 / HeltecV4 init for GC1109 FEM  <sub>2026-01-13 · `3eaca31f`</sub>
- **Docs** — Owner configuration commands documented  <sub>2026-01-12 · `58cdd60c`</sub>
- **Internal** — Advert timer type consistency in MyMesh / SensorMesh  <sub>2026-01-08 · `ffa2a1ec`</sub>
- **New** — Device metadata setup at bridge init / restart  <sub>2026-01-03 · `2bd61c13`</sub>
- **Internal** — Config validation allows optional username / password  <sub>2026-01-03 · `d1093b43`</sub>
- **Internal** — JWTHelper / MQTTBridge efficiency cleanup  <sub>2026-01-02 · `e754317c`</sub>
- **Fix** — MQTT connection stability and CLI responsiveness  <sub>2026-01-02 · `98f176c7`</sub>
- **New** — Neighbour-info sorting; MQTTBridge memory tuning  <sub>2026-01-01 · `2185523d`</sub>
-
-### December 2025
-
- **Docs** — WiFi power-save configuration documented  <sub>2025-12-30 · `915f8b8e`</sub>
- **Internal** — `loadPrefs` handles fresh installs and upgrades; migrates old prefs  <sub>2025-12-30 · `8fa99611`</sub>
- **Improvement** — Loop prioritizes radio RX for responsiveness  <sub>2025-12-29 · `617e3b17`</sub>
- **Internal** — Defer broker connect until WiFi + NTP ready; socket error logging  <sub>2025-12-17 · `5d4f1e4c`</sub>
- **Improvement** — Event-driven WiFi diagnostics and faster reconnect  <sub>2025-12-12 · `f7f1f838`</sub>
- **New** — WiFi power-save mode configuration (none / min / max)  <sub>2025-12-08 · `34c8bea7`</sub>
- **Fix** — LPS22HB pressure now reported in hPa (was kPa)  <sub>2025-12-08 · `b91b854a`</sub>
- **New** — WiFi TX power configuration (default 11 dBm)  <sub>2025-12-07 · `b82d7e43`</sub>
- **New** — Default bridge settings for fresh installs; JSON reuse to avoid fragmentation  <sub>2025-12-07 · `0b7c0888`</sub>
- **Improvement** — MQTT debug macros check Serial to prevent hangs  <sub>2025-12-06 · `3589043b`</sub>
- **Change** — Removed redundant settings writes in `savePrefs`  <sub>2025-12-04 · `03d519f8`</sub>
- **Build** — Source filter for the Xiao S3 WIO variant  <sub>2025-12-01 · `4f548ffc`</sub>
-
-### November 2025
-
- **New** — `adc_multiplier` added to NodePrefs  <sub>2025-11-23 · `8fbdc98a`</sub>
- **Change** — IATA codes uppercased for consistency  <sub>2025-11-23 · `5cadf3d9`</sub>
- **Change** — `CMD_GET_STATS` split into core / radio / packet sub-types  <sub>2025-11-17 · `a3c9a073`</sub>
- **New** — IP address shown for MQTT bridge devices in UITask  <sub>2025-11-16 · `6b0c0e93`</sub>
- **New** — T-Beam ESP32 support; error log when source = tx but TX logging is off  <sub>2025-11-16 · `3c7ac9d1`</sub>
- **Build** — `MQTT_DEBUG` enabled for several build configs  <sub>2025-11-16 · `3726c472`</sub>
- **New** — MQTT observer support for Room Servers  <sub>2025-11-15 · `0cd0c36a`</sub>
- **Change** — Switched MQTT configs to observer mode across variants  <sub>2025-11-13 · `304a32db`</sub>
- **Internal** — Client version string generation  <sub>2025-11-13 · `aa242e78`</sub>
- **Improvement** — WiFi power-save + reduced TX power to limit LoRa interference; retry fix when no brokers connected  <sub>2025-11-10 · `bafa5426`</sub>
- **Internal** — Statistics use binary frames instead of JSON  <sub>2025-11-09 · `80d6dd43`</sub>
- **New** — IATA validation blocks publishing without an IATA code  <sub>2025-11-08 · `25d40f02`</sub>
- **Fix** — Restored status-publish retry delay to prevent server spam  <sub>2025-11-08 · `9e06fffc`</sub>
- **New** — Added missing token-expiration / reconnection member variables  <sub>2025-11-08 · `453c4184`</sub>
- **Change** — Removed WiFi credentials from platformio.ini (use CLI / build flags)  <sub>2025-11-08 · `921c6112`</sub>
- **Internal** — MQTT preferences handling in CommonCLI  <sub>2025-11-08 · `5a816be8`</sub>
- **Internal** — `formatStatsReply` uses the new member variables  <sub>2025-11-08 · `c9aa536c`</sub>
- **Build** — Explicit `paulstoffregen/Time` dependency to fix PIO compile  <sub>2025-11-07 · `72ca50b9`</sub>
- **Build** — Dropped the CayenneLPP patch script; updated ArduinoJson  <sub>2025-11-07 · `fef9225b`</sub>
- **Fix** — Timezone command parsing lengths corrected  <sub>2025-11-07 · `b89ceeea`</sub>
- **New** — Statistics commands and response handling in MyMesh  <sub>2025-11-07 · `df4dab85`</sub>
- **New** — MQTT email support in CommonCLI / JWTHelper  <sub>2025-11-06 · `1ed18f9e`</sub>
- **New** — MQTT owner public-key support  <sub>2025-11-06 · `e5dbd56b`</sub>
- **Improvement** — Status reporting and stats collection  <sub>2025-11-01 · `e4ff06cb`</sub>
-
-### October 2025
-
- **Improvement** — MQTTBridge logging and connection handling  <sub>2025-10-31 · `7df28557`</sub>
- **Improvement** — Packet handling and memory management in MQTTMessageBuilder / MQTTBridge  <sub>2025-10-31 · `eee02025`</sub>
- **New** — Memory monitoring and queue-size reporting  <sub>2025-10-29 · `e77beff0`</sub>
- **Internal** — In-place base64url encoding; cleanup frees queued packets / timezone objects  <sub>2025-10-27 · `1219668f`</sub>
- **Change** — Defer MQTT connect until WiFi credentials are valid (requires reboot)  <sub>2025-10-27 · `3851a84b`</sub>
- **Improvement** — Dynamic build date and client versioning  <sub>2025-10-26 · `c23663da`</sub>
- **New** — CLI config for `mqtt.server` / `username` / `password` / `port`  <sub>2025-10-26 · `eab70c3c`</sub>
- **New** — Let's Mesh Analyzer integration  <sub>2025-10-26 · `a6453556`</sub>
- **New** — Station G2 repeater bridge build target; docs  <sub>2025-10-26 · `f6a77d2f`</sub>
- **New** — Timezone handling; raw-data packet output with proper hashes / timestamps  <sub>2025-10-25 · `787af7b0`</sub>
- **New** — Timezone support in the MQTT Bridge and CLI  <sub>2025-10-25 · `26c4b970`</sub>
- **New** — Initial MQTT Bridge implementation with WiFi CLI configuration  <sub>2025-10-25 · `efc15eb6`</sub>
-
-<!-- gen_changelog:hashes — auto-maintained list of every processed commit; do not edit by hand
-985fda13 8bf590b1 e80a5ded 0844eee1 8fa38707 002e8d4a b45373a3 c29ede05
-6723776f 981ed246 dcc8f826 c0c845f5 1296aa77 38568eb1 c41805d0 f717d673
-f3c6c348 5a004f37 3cde9c10 daf9ee47 a8668840 a865d0a3 19f95001 6a3ed5d4
-fc99d6b3 16dc49fa 80355f32 08847342 b9f478c9 303cf8c2 ff031f48 b37db668
-78e1500a 9f8f2d05 0b05aede 457edf69 5a5e5373 753eb72f 32449e62 673361b6
-8be27e4e bfcf0176 0a4f002f 7b21be3e 6211885c 0d280257 255fce7f c1989d6f
-ee4e39bc 70722a58 bb67b04e 7d0c5bce cfec3a5b ac2662c5 d6712c69 e9ff1ae0
-1ff9437f 563d9a7d 0ed29cb7 ab121708 074ac3e7 f4a4fd7c ab6685a1 13fbcd91
-ff2df2b7 0c190dac 961f8293 7e4f75c9 74e45a79 3b46e9ee 1c524a93 47b632aa
-258a0d72 f0962eff cf4ec3f6 0e82271e a4324a83 1263e71d da775bb2 384b80fc
-ff49d28f 202acacf cc17c6b7 3eacf56e 47dd2182 1b5884bd af52a989 e29c3d96
-2bbca206 eaf5fcbc 1c98d1c6 4a60f166 95874f0c c67fb12b bf8a3a7a 542f8a31
-b43e9618 abe6e046 22eb9b87 2b637655 304719e8 db8b4419 56ac85fa dcbbe5a6
-8b359452 c8e220b1 51e9907f ee1a9b4a 397a48fc 2d4b7a64 88ce0d33 e89cbee8
-776131e2 f445b5ac ba4243b5 26aaace9 1d0d33f9 abcfe609 21158e1f 0fb57033
-498566e6 f91b715e 019bbf74 ee577314 bb27cded d96c900f 066df192 2c99967c
-2a84e58b 9e1ce23e c67c3295 c055228c 39ba020f ed27ebd0 56f98997 3eaca31f
-58cdd60c ffa2a1ec 2bd61c13 d1093b43 e754317c 98f176c7 2185523d 915f8b8e
-8fa99611 617e3b17 5d4f1e4c f7f1f838 34c8bea7 b82d7e43 0b7c0888 3589043b
-03d519f8 4f548ffc 8fbdc98a 5cadf3d9 3726c472 6b0c0e93 3c7ac9d1 158748d4
-44c24515 304a32db aa242e78 bafa5426 25d40f02 9e06fffc 3feb2cd5 ad68a29f
-cf3a9c31 453c4184 b04a1a1d 0de7da84 921c6112 c5e2f18d 5a816be8 72ca50b9
-fef9225b b89ceeea 1ed18f9e e5dbd56b e4ff06cb 7df28557 e77beff0 eee02025
-2b047599 1219668f 3851a84b eab70c3c c23663da a6453556 f6a77d2f 787af7b0
-26c4b970 efc15eb6 0cd0c36a bffbbb76 72811df6 a3875d87 dd9edbde a4aace61
-09bc9cbc 4d7282c3 77169810 c0c56039 c36aac9a b15912fe 76a5caa0 a0e14f4b
-2876ea6e ca55c9bf 97815834 fbc499e7 39850fa4 a8474c7c 8f34d966 8ca969be
-9352db1e 08fb3046 ea134e43 46041130 8261633c bba6d896 58b73343 ed70ceb2
-180c1d49 e9fe66c1 f39d2299 91cc4f50 ee6a7565 b91b854a a3c9a073 39f83efb
-80d6dd43 c9aa536c df4dab85
-->
@@ -1,194 +0,0 @@
-# MeshCore Memory Monitoring Guide
-
-## Quick Start
-
-### 1. Find Your Device Port
-```bash
-# Linux/macOS
-ls /dev/tty* | grep -E "(USB|ACM)"
-
-# Common ports:
-# /dev/ttyUSB0    - Linux USB serial
-# /dev/ttyACM0    - Linux USB CDC
-# /dev/cu.usbserial-* - macOS USB serial
-# /dev/cu.usbmodem*   - macOS USB CDC
-```
-
-### 2. Run Monitoring
-```bash
-# Monitor for 4 hours (default)
-python3 monitor_memory.py /dev/ttyUSB0
-
-# Monitor for 24 hours
-python3 monitor_memory.py /dev/ttyUSB0 24
-
-# Monitor for 2 hours with 60-second intervals
-python3 monitor_memory.py /dev/ttyUSB0 2 --interval 60
-```
-
-## What It Monitors
-
-### Memory Metrics
- **Free Heap**: Available memory in bytes
- **Min Heap**: Minimum free heap since boot
- **Max Alloc**: Largest allocatable block
- **Queue Size**: Number of queued MQTT packets
-
-### Calculated Metrics
- **Heap Usage %**: Percentage of total memory used
- **Fragmentation %**: How fragmented the heap is
-
-### Automatic Alerts
- **LOW_MEMORY**: Free heap < 50KB
- **HIGH_FRAGMENTATION**: Fragmentation > 50%
- **QUEUE_BUILDUP**: Queue size > 20 packets
- **POSSIBLE_LEAK**: Memory decreasing over time
-
-## Output Files
-
-### Console Output
-```
-[  30.0m] Free: 102796, Min: 83544, Max: 75764, Queue: 0, Usage: 68.6%, Frag: 26.3%
-[  60.0m] Free: 101234, Min: 82345, Max: 74321, Queue: 2, Usage: 69.1%, Frag: 26.5%
-⚠️  WARNING: HIGH_FRAGMENTATION
-```
-
-### CSV Log File
-```csv
-Timestamp,Elapsed_Minutes,Free_Heap,Min_Heap,Max_Alloc,Queue_Size,Heap_Usage_Percent,Fragmentation_Percent
-2024-01-15T10:30:00,0.0,102796,83544,75764,0,68.6,26.3
-2024-01-15T11:00:00,30.0,101234,82345,74321,2,69.1,26.5
-```
-
-## Understanding Results
-
-### Healthy System
- **Free Heap**: 150KB+ (stable)
- **Min Heap**: 120KB+ (stable)
- **Max Alloc**: 100KB+ (stable)
- **Fragmentation**: < 30%
- **Queue**: 0-10 packets
-
-### Warning Signs
- **Free Heap**: < 100KB or decreasing
- **Min Heap**: < 80KB or decreasing
- **Fragmentation**: > 50%
- **Queue**: > 20 packets consistently
-
-### Memory Leak Indicators
- **Consistent decrease** in Free Heap over time
- **Min Heap dropping** below previous minimums
- **Max Alloc shrinking** (fragmentation increasing)
- **POSSIBLE_LEAK** alert triggered
-
-## Long-Term Monitoring
-
-### 24-Hour Test
-```bash
-python3 monitor_memory.py /dev/ttyUSB0 24
-```
- Tests for memory leaks over extended period
- Monitors system stability under normal load
- Identifies gradual memory degradation
-
-### 48-Hour Stress Test
-```bash
-python3 monitor_memory.py /dev/ttyUSB0 48 --interval 60
-```
- Extended monitoring for critical deployments
- 60-second intervals reduce log file size
- Tests system under continuous operation
-
-## Troubleshooting
-
-### Device Not Responding
-1. Check port is correct: `ls /dev/tty*`
-2. Ensure device is connected and powered
-3. Try different baud rate if needed
-4. Check device is in correct mode
-
-### No Data in CSV
-1. Verify device responds to `memory` command manually
-2. Check serial connection is stable
-3. Ensure device has MQTT bridge enabled
-
-### High Memory Usage
-1. Check if it's stable or increasing
-2. Look for memory leak patterns
-3. Monitor queue size for packet buildup
-4. Consider reducing debug logging
-
-## Analysis Tools
-
-### Plot Memory Usage
-```python
-import pandas as pd
-import matplotlib.pyplot as plt
-
-# Load CSV data
-df = pd.read_csv('memory_monitor_20240115_103000.csv')
-
-# Plot memory over time
-plt.figure(figsize=(12, 8))
-plt.subplot(2, 2, 1)
-plt.plot(df['Elapsed_Minutes'], df['Free_Heap'])
-plt.title('Free Heap Over Time')
-plt.ylabel('Bytes')
-
-plt.subplot(2, 2, 2)
-plt.plot(df['Elapsed_Minutes'], df['Heap_Usage_Percent'])
-plt.title('Heap Usage Percentage')
-plt.ylabel('%')
-
-plt.subplot(2, 2, 3)
-plt.plot(df['Elapsed_Minutes'], df['Fragmentation_Percent'])
-plt.title('Heap Fragmentation')
-plt.ylabel('%')
-
-plt.subplot(2, 2, 4)
-plt.plot(df['Elapsed_Minutes'], df['Queue_Size'])
-plt.title('Queue Size')
-plt.ylabel('Packets')
-
-plt.tight_layout()
-plt.savefig('memory_analysis.png')
-plt.show()
-```
-
-### Check for Trends
-```python
-# Calculate memory trend
-df['Free_Heap_Trend'] = df['Free_Heap'].rolling(window=10).mean()
-df['Trend_Slope'] = df['Free_Heap_Trend'].diff()
-
-# Identify decreasing trends
-decreasing = df[df['Trend_Slope'] < -1000]
-if not decreasing.empty:
-    print("Memory decreasing trend detected!")
-    print(decreasing[['Elapsed_Minutes', 'Free_Heap', 'Trend_Slope']])
-```
-
-## Best Practices
-
-1. **Start with 4-hour baseline** to establish normal patterns
-2. **Monitor during peak usage** times for worst-case scenarios
-3. **Run 24-hour tests** before production deployment
-4. **Check logs regularly** for warning signs
-5. **Keep historical data** for trend analysis
-6. **Test after code changes** to verify fixes
-
-## Emergency Procedures
-
-### If Memory Leak Detected
-1. **Stop monitoring** (Ctrl+C)
-2. **Check recent code changes**
-3. **Look for unfreed allocations**
-4. **Test with reduced functionality**
-5. **Deploy memory leak fix**
-
-### If System Crashes
-1. **Check last known good memory values**
-2. **Identify crash threshold**
-3. **Add more frequent monitoring**
-4. **Implement memory safeguards**
-5. **Consider hardware upgrade**
@@ -1,780 +0,0 @@
-# MQTT Bridge Implementation for MeshCore
-
-This document describes the MQTT bridge implementation that allows MeshCore repeaters to uplink packet data to multiple MQTT brokers.
-
-## Quick Start Guide
-
-### Essential Commands to Get MQTT Observer Running
-
-**1. Flash the observer firmware to your device**
-
-Use one of the observer build targets (e.g., `heltec_v4_repeater_observer_mqtt`). After flashing, connect to the device console via serial (115200 baud) or repeater login.
-
-**2. Configure radio settings**
-
-If this is a fresh flash or full erase, configure your radio parameters first. These must match other nodes in your mesh:
-
-```bash
-set radio 910.525,62.5,7,5
-set tx 22
-```
-
-Format: `set radio <freq_MHz>,<bw_kHz>,<sf>,<cr>`
-
-**3. Configure device identity**
-
-```bash
-set name MyObserver
-set mqtt.iata SEA
-```
-
-If migrating from an existing node (e.g., a Raspberry Pi gateway), restore the private key to keep the same identity:
-```bash
-set prv.key <your_64_hex_char_private_key>
-```
-
-**4. Configure WiFi credentials** (value is the rest of the line; do not use quotes — see [WiFi Commands](#wifi-commands))
-```bash
-set wifi.ssid YourWiFiNetwork
-set wifi.pwd YourWiFiPassword
-```
-
-**5. (Optional) Disable packet repeating**
-
-If this observer is receive-only (e.g., using a PCB antenna in a location where repeating would be harmful), disable forwarding:
-```bash
-set repeat off
-```
-
-**6. Reboot to connect**
-```bash
-reboot
-```
-
-**7. Verify configuration**
-```bash
-get wifi.ssid
-get bridge.enabled
-get mqtt.rx
-get mqtt.tx
-get mqtt.origin
-get mqtt.iata
-get mqtt1.preset
-get mqtt2.preset
-get mqtt3.preset
-get mqtt.status
-```
-
-**That's it!** The device will now:
- Connect to WiFi automatically
- Start uplinking mesh packets to configured MQTT brokers
- By default, publish to Let's Mesh Analyzer US (slot 1) and EU (slot 2)
- Use device name as MQTT origin (set automatically)
-
---
-
-## Overview
-
-The MQTT bridge implementation provides:
- Up to 6 MQTT connection slots with built-in presets
- Built-in presets for many community brokers (see the [preset table](#slot-based-preset-system) for the full list)
- Custom broker support with username/password authentication
- JWT (Ed25519 device signing) authentication for most preset brokers; TennMesh uses a fixed username/password (plain MQTT)
- WSS (WebSocket Secure), direct MQTT/TLS, and plain MQTT (TennMesh) transport
- Automatic reconnection with exponential backoff
- JSON message formatting for status, packets, and raw data
- Packet queuing during connection issues
- Automatic migration from old configuration format
-
-## Architecture
-
-### Slot-Based Preset System
-
-The MQTT bridge uses a slot-based architecture with up to 6 concurrent connections. Each slot can be configured with a built-in preset or custom broker settings.
-
-**Built-in Presets:**
-
-| Preset | Server | Auth | Transport |
-|--------|--------|------|-----------|
-| `analyzer-us` | mqtt-us-v1.letsmesh.net:443 | JWT (Ed25519) | WSS |
-| `analyzer-eu` | mqtt-eu-v1.letsmesh.net:443 | JWT (Ed25519) | WSS |
-| `nz-analyzer` | meshcore-mqtt-1.baird.io:443 | JWT (Ed25519) | WSS |
-| `meshmapper` | mqtt.meshmapper.net:443 | JWT (Ed25519) | WSS |
-| `meshrank` | meshrank.net:8883 | None (token in topic) | MQTT over TLS |
-| `waev` | mqtt.waev.app:443 | JWT (Ed25519) | WSS |
-| `meshomatic` | us-east.meshomatic.net:443 | JWT (Ed25519) | WSS |
-| `cascadiamesh` | mqtt-v1.cascadiamesh.org:443 | JWT (Ed25519) | WSS |
-| `tennmesh` | mqtt.tennmesh.com:1883 | Username/password (fixed in firmware) | Plain MQTT |
-| `nashmesh` | mqtt://mqtt.nashme.sh:1883 | Username/password (fixed in firmware) | Plain MQTT |
-| `ctmesh` | mqtt.ctmesh.org:1883 | Username/password (fixed in firmware) | Plain MQTT |
-| `chimesh` | wss://mqtt.chimesh.org:443 | JWT (Ed25519) | WSS |
-| `meshat.se` | meshcore-mqtt.meshat.se:443 | JWT (Ed25519) | WSS |
-| `eastidahomesh` | wss://broker.eastidahomesh.net:443 | None | WSS |
-| `coloradomesh` | wss://mqtt.meshcore.coloradomesh.org:1883 | JWT (Ed25519) | WSS |
-| `dutchmeshcore-1` | collector1.dutchmeshcore.nl:443 | JWT (Ed25519) | WSS |
-| `dutchmeshcore-2` | collector2.dutchmeshcore.nl:443 | JWT (Ed25519) | WSS |
-| `meshcore-ca-1` | mqtt1.meshcore.ca:443 | JWT (Ed25519) | WSS |
-| `meshcore-ca-2` | mqtt2.meshcore.ca:443 | JWT (Ed25519) | WSS |
-| `bostonmesh` | mqttmc01.bostonme.sh:443 | JWT (Ed25519) | WSS |
-| `ipnt.uk` | mqtt.ipnt.uk:443 | JWT (Ed25519) | WSS |
-| `flmesh` | mcmqtt.jntconnections.com:443 | JWT (Ed25519) | WSS |
-| `inwmesh` | scope.inwmesh.org:8883 | Username/password (per slot via `mqttN.username` / `mqttN.password`) | MQTT over TLS |
-| `rflab` | mqtt.rflab.io:443 | JWT (Ed25519) | WSS |
-| `custom` | User-configured | Username/Password | MQTT or WSS |
-| `none` | (disabled) | — | — |
-
-**Default Configuration:**
- Slot 1: `analyzer-us`
- Slot 2: `analyzer-eu`
- Slots 3-6: `none`
-
-**Memory Limits:**
- With PSRAM: All slots can be active simultaneously
- Without PSRAM: Maximum 2 active TLS/WSS slots (each WSS/TLS connection requires ~40KB internal heap)
- If more slots are configured than the device supports, excess slots show as `(inactive)` in `get mqtt.status`
- Slot configurations are preserved in preferences — moving firmware to a PSRAM device activates all slots
-
-## Build Configuration
-
-To build the MQTT bridge firmware:
-
-```bash
-# Heltec V3
-pio run -e Heltec_v3_repeater_observer_mqtt
-
-# Heltec V4
-pio run -e heltec_v4_repeater_observer_mqtt
-
-# Station G2
-pio run -e Station_G2_repeater_observer_mqtt
-
-# LilyGo T-LoRa V2.1-1.6 (TTGO LoRa32 V1.0)
-pio run -e LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt
-pio run -e LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt
-```
-
-**TLora naming:** The env prefix `LilyGo_TLora_V2_1_1_6` is LilyGo’s **T-LoRa V2.1–1.6** board (SX1276); PlatformIO selects **`ttgo-lora32-v1`** (TTGO LoRa32 V1.0). **MQTT observer** envs extend a slim base **without** `sensor_base` so the image fits `min_spiffs`; **all other** `LilyGo_TLora_V2_1_1_6_*` targets still use optional I2C environmental sensors as before. The **`lilygo_tlora_c6`** variant is separate hardware (ESP32-C6).
-
-**T-LoRa V2.1–1.6 MQTT observer — one WSS broker:** This hardware is **classic ESP32 without PSRAM**. Each WSS preset uses a full TLS stack and large contiguous heap allocations; **two active broker presets at once** typically fails the second connection (`mbedtls_ssl_setup` / `esp-tls` `0x8017`, low `IntMax` in `memory`). **Treat these observer builds as supporting one active cloud preset:** configure the broker you need in `mqtt1` or `mqtt2`, and set the other slot to `none` (e.g. `set mqtt2.preset none`). Use PSRAM-capable boards if you need multiple simultaneous MQTT uplinks.
-
-### Partition Table Changes — Merged Firmware Required
-
-Some MQTT observer builds use a non-default partition table to accommodate the larger firmware size (MQTT libraries, TLS, cert bundle, etc.). **When a board's partition table changes, you must flash the merged firmware (`*-merged.bin`) the first time** so the new partition layout and bootloader are written together. After that initial flash, standard OTA or non-merged updates will work normally.
-
-| Environment | Partition Table | Flash Size | App Slot Size | Notes |
-|-------------|----------------|------------|---------------|-------|
-| `LilyGo_T3S3_sx1262_repeater_observer_mqtt` | `min_spiffs.csv` | 4 MB | 1.875 MB | Changed from default (1.25 MB) |
-| `LilyGo_T3S3_sx1262_room_server_observer_mqtt` | `min_spiffs.csv` | 4 MB | 1.875 MB | Changed from default (1.25 MB) |
-| `LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt` | `min_spiffs.csv` | 4 MB | 1.875 MB | TTGO LoRa32 V1.0; observer omits `sensor_base`. **One active WSS broker** recommended (no PSRAM; dual TLS usually fails on the second slot). |
-| `LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt` | `min_spiffs.csv` | 4 MB | 1.875 MB | same |
-| `Station_G2_repeater_observer_mqtt` | `default_16MB.csv` | 16 MB | 6.25 MB | 16 MB flash board |
-| `Station_G2_room_server_observer_mqtt` | `default_16MB.csv` | 16 MB | 6.25 MB | 16 MB flash board |
-| `LilyGo_TBeam_1W_repeater_observer_mqtt` | `default_16MB.csv` | 16 MB | 6.25 MB | Set in `boards/t_beam_1w.json`; required vs implicit `default.csv` |
-| `LilyGo_TBeam_1W_room_server_observer_mqtt` | `default_16MB.csv` | 16 MB | 6.25 MB | same |
-
-**NVS / settings when the partition layout changes**
-
-Flashing a **full merged image** (`*-merged.bin` at offset `0x0`) writes a new bootloader **and** partition table. If that layout **differs** from what is already on the device, **NVS is typically wiped or invalidated** — expect to lose stored configuration (admin preferences, WiFi, MQTT slots, name, etc.) and reconfigure from scratch.
-
- **`LilyGo_TLora_V2_1_1_6_*_observer_mqtt`:** These use the **same** `min_spiffs.csv` layout as other MeshCore TLora builds, so moving between repeater / room server / MQTT observer does **not** require a different partition table for normal upgrades. **If you previously installed an older TLora MQTT observer that used `huge_app.csv`,** flashing this firmware switches back to `min_spiffs` — treat that as a **partition layout change** (merged flash; NVS may be reset). **If you install MeshCore on a device that used a non-MeshCore partition map,** the first merged flash can still **wipe** settings.
- **`Station_G2_*_observer_mqtt`** and **`LilyGo_TBeam_1W_*_observer_mqtt`**: These use `default_16MB.csv` to accomodate the larger size of the MQTT observer firmware. Installing MQTT observer firmware on these devices requires a **merged** flash the first time. The same applies if you move **from** firmware that was built with a **different** partition table—the first merged flash that installs this layout will **wipe** stored settings. 
-
-**How to flash the merged firmware:**
-
-You can flash the merged firmware using either the web flasher or the command line:
-
- **Web flasher (recommended):** Use the [MeshCore Web Flasher](https://meshcore.io/flasher) to flash the `*-merged.bin` file directly from your browser — no tools to install.
- **Command line:**
-  ```bash
-  # Build the merged binary
-  pio run -t mergebin -e LilyGo_T3S3_sx1262_repeater_observer_mqtt
-
-  # Flash at offset 0x0 (overwrites bootloader + partition table)
-  esptool.py write_flash 0x0 .pio/build/LilyGo_T3S3_sx1262_repeater_observer_mqtt/firmware-merged.bin
-  ```
-
-> **Note:** If the **partition layout is unchanged** (e.g. updating the MQTT observer build in place), device configuration in NVS is usually retained; Bluetooth pairings may still be cleared on some upgrade paths. If the **partition table is new to the device**, see **NVS / settings when the partition layout changes** above — stored settings are typically lost. After the first merged flash **for a given layout**, subsequent updates on that board can use OTA or the standard non-merged binary when applicable.
-
-### Build Flags
- `WITH_MQTT_BRIDGE=1` - Enable MQTT bridge (required)
- `WITH_SNMP=1` - Enable SNMP agent (optional, see [MQTT_SNMP.md](MQTT_SNMP.md))
- `MQTT_DEBUG=1` - Enable debug logging (optional)
- `MQTT_WIFI_TX_POWER` - WiFi TX power level (default: `WIFI_POWER_11dBm`)
- ~~`MQTT_WIFI_POWER_SAVE_DEFAULT`~~ - Removed; all builds now default to `none` (no power save)
-
-#### Compile-time fresh-install defaults (`src/helpers/MQTTDefaults.h`)
-
-Optional PlatformIO `build_flags` override defaults written when `/mqtt_prefs` is first created. They do **not** change existing saved prefs on upgrade or reflash (unless `/mqtt_prefs` is erased).
-
-| Macro | Default | Notes |
-|-------|---------|-------|
-| `MQTT_DEFAULT_SLOT1_PRESET` … `MQTT_DEFAULT_SLOT6_PRESET` | slots 1–2: `analyzer-us` / `analyzer-eu`; slots 3–6: `none` | Must be a built-in preset name, `none`, or `custom` |
-| `MQTT_DEFAULT_IATA` | (empty) | e.g. `'"YYZ"'` |
-| `MQTT_DEFAULT_TIMEZONE` | (empty) | e.g. `'"America/Toronto"'` |
-| `MQTT_DEFAULT_TIMEZONE_OFFSET` | `0` | Fallback hours when TZ string is empty |
-
-Example community build:
-
-```ini
-build_flags =
-  -D MQTT_DEFAULT_SLOT1_PRESET='"meshcore-ca-1"'
-  -D MQTT_DEFAULT_SLOT2_PRESET='"meshcore-ca-2"'
-  -D MQTT_DEFAULT_IATA='"YYZ"'
-  -D MQTT_DEFAULT_TIMEZONE='"America/Toronto"'
-  -D MQTT_DEFAULT_TIMEZONE_OFFSET=-5
-```
-
-WiFi SSID/password are not compile-time configurable (operators set them per device via CLI).
-
-Legacy `get mqtt.analyzer_us` / `set mqtt.analyzer_us` still refer to the preset name `analyzer-us`, not “whatever slot 1 default is”.
-
-## Default Configuration
-
-The MQTT bridge comes with the following defaults for fresh installs (unless overridden by the macros above):
- **Origin**: Device name (set automatically from `set name`)
- **IATA**: (blank — must be configured for MeshCore-style topic presets such as Analyzer and TennMesh, unless `MQTT_DEFAULT_IATA` is set at build time)
- **Status Messages**: Enabled
- **Packet Messages**: Enabled
- **Raw Messages**: Disabled
- **RX Packets**: Enabled (uplink received packets)
- **TX Packets**: `advert` by default (uplink this node's own adverts; set to `on` for all TX or `off` to disable)
- **Status Interval**: 5 minutes (300000 ms)
- **Slot 1**: `analyzer-us`
- **Slot 2**: `analyzer-eu`
- **Slots 3-6**: `none` (disabled)
- **WiFi SSID**: (blank — must be configured)
- **WiFi Password**: (blank — optional for open networks)
- **WiFi Power Save**: `none` (no power save)
- **Timezone**: (blank — uses UTC until configured, unless `MQTT_DEFAULT_TIMEZONE` is set at build time)
- **Timezone Offset**: 0 (fallback, no offset, unless `MQTT_DEFAULT_TIMEZONE_OFFSET` is set)
- **Repeat (forwarding)**: On (set `repeat off` for receive-only observers)
-
-## CLI Commands
-
-### MQTT Slot Commands
-
-Each slot (1-6) supports the following commands:
-
-#### Get Commands
- `get mqtt1.preset` - Get slot 1 preset name
- `get mqtt2.preset` - Get slot 2 preset name
- `get mqttN.preset` - Get slot N preset name (N = 1-6)
- `get mqttN.server` - Get custom server hostname for slot N
- `get mqttN.port` - Get custom server port for slot N
- `get mqttN.username` - Get custom username for slot N
- `get mqttN.password` - Get custom password for slot N
- `get mqttN.token` - Get per-slot token (e.g., MeshRank account token)
- `get mqttN.topic` - Get custom topic template for slot N
- `get mqttN.audience` - Get JWT audience for slot N (custom slots only)
-
-#### Set Commands
- `set mqttN.preset <name>` - Set slot N to a built-in preset. Use any `name` from the [preset table](#slot-based-preset-system) (run `get mqtt.presets` on-device for the full list). Most presets need no further configuration; the exceptions are:
-  - `meshrank` - requires a per-slot token (`set mqttN.token <token>`)
-  - `inwmesh` - requires per-slot credentials (`set mqttN.username` / `set mqttN.password`)
- `set mqttN.preset custom` - Set slot N to custom broker (configure server/port/username/password)
- `set mqttN.preset none` - Disable slot N
- `set mqttN.server <hostname>` - Set custom server hostname for slot N
- `set mqttN.port <port>` - Set custom server port for slot N (1-65535)
- `set mqttN.username <username>` - Set username for slot N (`custom` preset, or presets like `inwmesh` that require per-device credentials)
- `set mqttN.password <password>` - Set password for slot N (`custom` preset, or presets like `inwmesh` that require per-device credentials)
- `set mqttN.token <token>` - Set per-slot token (required for MeshRank preset)
- `set mqttN.topic <template>` - Set custom topic template (custom preset only, see below)
- `set mqttN.audience <audience>` - Set JWT audience for custom slot (enables Ed25519 JWT auth)
- `set mqttN.audience` - Clear JWT audience (reverts to username/password auth)
-
-**Note:** Custom server/port settings only apply when the slot's preset is `custom`. Username/password also apply to built-in presets that use per-slot credentials (e.g. `inwmesh`); other userpass presets (`tennmesh`, `nashmesh`, `ctmesh`) ship fixed credentials in firmware.
-
-#### Example: Configure MeshRank on Slot 3
-```bash
-set mqtt3.preset meshrank
-set mqtt3.token FE1B34242C5938C39225310081FD6718
-```
-
-The token is generated on the MeshRank website and is tied to your account. MeshRank only receives packet data (no status or raw messages).
-
-#### Example: Configure MeshMapper on Slot 3
-```bash
-set mqtt3.preset meshmapper
-```
-
-#### Example: Configure Custom Broker on Slot 3
-```bash
-set mqtt3.preset custom
-set mqtt3.server your-broker.example.com
-set mqtt3.port 1883
-set mqtt3.username your-username
-set mqtt3.password your-password
-```
-
-#### Example: Custom Broker with JWT Authentication (Ed25519)
-
-For community brokers that support the MeshCore JWT auth protocol (same as the built-in presets), set the `audience` field to enable Ed25519-signed JWT authentication:
-```bash
-set mqtt3.preset custom
-set mqtt3.server wss://my-broker.example.com:443/mqtt
-set mqtt3.audience my-broker.example.com
-```
-
-When the server is given as a full URL with a scheme (`mqtt://`, `mqtts://`, `ws://`, `wss://`), `set mqttN.port` is optional — an explicit port in the URL is used as-is, and without one the scheme's default port applies.
-
-When `audience` is set, the device will:
- Connect with username `v1_{PUBLIC_KEY}` and an Ed25519-signed JWT as the password
- Automatically renew tokens before expiry (default 24h lifetime)
- Include owner public key and email in the JWT payload (if configured via `set mqtt.owner` / `set mqtt.email`)
-
-To revert a slot back to username/password auth, clear the audience:
-```bash
-set mqtt3.audience
-```
-
-#### Example: Local Development Broker (plain WebSocket, no TLS)
-
-For local development (e.g. a LAN broker without SSL termination), use a full `ws://` URL. Non-TLS transports (`ws://`, `mqtt://`) skip certificate verification entirely:
-```bash
-set mqtt3.preset custom
-set mqtt3.server ws://192.168.1.50:9001/mqtt
-set mqtt3.audience my-local-broker
-```
-
-The `audience` line is optional — set it if your local broker uses the same JWT auth as the production presets, or use `set mqtt3.username` / `set mqtt3.password` instead.
-
-#### Example: Custom Broker with Custom Topic Template
-```bash
-set mqtt3.preset custom
-set mqtt3.server my-broker.local
-set mqtt3.port 1883
-set mqtt3.topic mynetwork/{device}/{type}
-```
-
-### Custom Topic Templates
-
-When a slot's preset is `custom`, you can define a custom topic template using placeholders:
-
-| Placeholder | Value | Example |
-|-------------|-------|---------|
-| `{iata}` | IATA airport code | `SEA` |
-| `{device}` | Device public key (64 hex chars) | `CC5D3CFD...` |
-| `{token}` | Per-slot token from `mqttN.token` | `FE1B3424...` |
-| `{type}` | Message type | `status`, `packets`, or `raw` |
-
-If no custom topic is set, custom slots default to: `meshcore/{iata}/{device}/{type}`
-
-**Note:** Topic templates only apply to `custom` preset slots. Built-in presets (analyzer-us, analyzer-eu, meshmapper, meshrank, eastidahomesh, coloradomesh, tennmesh, etc.) always use their hardcoded topic format.
-
-### MQTT Shared Commands
-
-These settings apply across all MQTT slots:
-
-#### Get Commands
- `get mqtt.origin` - Get device origin name
- `get mqtt.iata` - Get IATA code
- `get mqtt.presets` - List available MQTT presets (paginated, comma-separated)
- `get mqtt.presets <start>` - Continue list from index shown in `... next:<idx>`
- `get mqtt.status` - Get MQTT status summary (connection info per slot)
- `get mqtt.packets` - Get packet message setting (on/off)
- `get mqtt.raw` - Get raw message setting (on/off)
- `get mqtt.rx` - Get RX packet uplinking setting (on/off)
- `get mqtt.tx` - Get TX packet uplinking setting (on/off/advert)
- `get mqtt.interval` - Get status publish interval
- `get mqtt.ntp` - Get effective NTP server hostname
- `get mqtt.ntp.diag` - Probe every configured NTP server for connectivity (does not change the clock; serial console shows each server's reported time, LoRa shows a compact `<server> ok|fail` list)
- `get mqtt.owner` - Get owner public key (serial console only)
- `get mqtt.email` - Get owner email address (serial console only)
-
-#### Set Commands
- `set mqtt.origin <name>` - Set device origin name
- `set mqtt.iata <code>` - Set IATA code (auto-uppercased)
- `set mqtt.status on|off` - Enable/disable status messages
- `set mqtt.packets on|off` - Enable/disable packet messages
- `set mqtt.raw on|off` - Enable/disable raw messages
- `set mqtt.rx on|off` - Enable/disable RX (received) packet uplinking
- `set mqtt.tx on|off|advert` - Set TX packet uplinking mode:
-  - `on` - Uplink all transmitted packets
-  - `advert` - Uplink only this node's own advert packets (self-originated)
-  - `off` - Disable TX packet uplinking
- `set mqtt.interval <minutes>` - Set status publish interval (1-60 minutes)
- `set mqtt.ntp <hostname>` - Set custom NTP server (validated with immediate sync); `none` reverts to default
- `set mqtt.owner <64-hex-char-public-key>` - Set owner public key
- `set mqtt.email <email>` - Set owner email address
-
-### WiFi Commands
-
-#### Get Commands
- `get wifi.ssid` - Get WiFi SSID
- `get wifi.pwd` - Get WiFi password
- `get wifi.status` - Get WiFi connection status, IP, RSSI, and uptime
- `get wifi.powersave` - Get WiFi power save mode (none/min/max)
-
-#### Set Commands
- `set wifi.ssid <ssid>` - Set WiFi SSID
- `set wifi.pwd <password>` - Set WiFi password
- `set wifi.powersave none|min|max` - Set WiFi power save mode
-
-> **Note:** The value is everything after the first space (spaces in SSID/password are fine). Do not wrap in quotes — they are stored literally. Max length: 31 characters (SSID), 63 (password). For open networks, use `set wifi.pwd ` with nothing after the space.
-  - `none` - No power saving (best performance, highest power consumption)
-  - `min` - Minimum power saving (balanced performance and power)
-  - `max` - Maximum power saving (lowest power consumption, may affect performance)
-
-### Timezone Commands
-
-#### Get Commands
- `get timezone` - Get timezone string (e.g., "America/Los_Angeles")
- `get timezone.offset` - Get timezone offset in hours (-12 to +14)
-
-#### Set Commands
- `set timezone <string>` - Set timezone string (IANA format or abbreviation)
- `set timezone.offset <offset>` - Set timezone offset in hours (-12 to +14)
-
-#### Supported Timezone Formats
- **IANA strings**: `America/Los_Angeles`, `Europe/London`, `Asia/Tokyo`, etc.
- **Common abbreviations**: `PDT`, `PST`, `MDT`, `MST`, `CDT`, `CST`, `EDT`, `EST`, `BST`, `GMT`, `CEST`, `CET`
- **UTC offsets**: `UTC-8`, `UTC+5`, `+5`, `-8`, etc.
-
-### Device & Radio Commands
-
-These are standard MeshCore commands, not MQTT-specific, but important for observer setup:
-
-#### Get Commands
- `get name` - Get device name
- `get repeat` - Get repeat (forwarding) status (on/off)
- `get freq` - Get radio frequency
- `get public.key` - Get device public key (for migration)
-
-#### Set Commands
- `set name <name>` - Set device name (also sets MQTT origin)
- `set repeat on|off` - Enable/disable packet forwarding (use `off` for receive-only observers)
- `set prv.key <64-hex-char-key>` - Restore private key (for migrating identity from another device)
- `set tx <dBm>` - Set transmit power
-
-### Bridge Commands
-
-#### Get Commands
- `get bridge.source` - Get packet source (rx/tx)
- `get bridge.enabled` - Get bridge enabled status (on/off)
-
-#### Set Commands
- `set bridge.source rx|tx` - Set packet source (rx for received, tx for transmitted)
- `set bridge.enabled on|off` - Enable/disable bridge
-
-### SNMP Commands
-
-#### Get Commands
- `get snmp` - Get SNMP agent status (on/off)
- `get snmp.community` - Get SNMP community string
-
-#### Set Commands
- `set snmp on|off` - Enable/disable SNMP agent (restart required)
- `set snmp.community <string>` - Set SNMP community string (restart required, default: `public`)
-
-See [MQTT_SNMP.md](MQTT_SNMP.md) for full SNMP documentation.
-
-## Command Architecture
-
-The CLI commands are organized into two levels:
-
-### Bridge Commands (`bridge.*`)
-**Low-level bridge control** - These settings apply to all bridge types (MQTT, RS232, ESP-NOW, etc.):
- `bridge.enabled` - Master switch for the entire bridge system
- `bridge.source` - Controls which packet events to capture for non-MQTT bridges (RS232, ESP-NOW). For MQTT, use `mqtt.rx` and `mqtt.tx` instead.
-
-### Bridge-Specific Commands (`mqtt.*`, `mqttN.*`, `wifi.*`, `timezone.*`)
-**Implementation-specific settings** - These only apply to the MQTT bridge:
- `mqtt.rx` / `mqtt.tx` - Independent per-direction packet uplinking control
- `mqttN.*` - Per-slot MQTT broker configuration (N = 1-6)
- `mqtt.*` - Shared MQTT settings (message types, origin, IATA, etc.)
- `wifi.*` - WiFi connection settings for MQTT connectivity
- `timezone.*` - Timezone configuration for accurate timestamps
-
-## MQTT Topics
-
-The bridge publishes to three main topics with the following structure:
-
-### Status Topic: `meshcore/{IATA}/{DEVICE_PUBLIC_KEY}/status`
-Device connection status and metadata (retained messages).
-
-### Packets Topic: `meshcore/{IATA}/{DEVICE_PUBLIC_KEY}/packets`
-Full packet data with RF characteristics and metadata.
-
-### Raw Topic: `meshcore/{IATA}/{DEVICE_PUBLIC_KEY}/raw`
-Minimal raw packet data for map integration.
-
-**Note**: `{DEVICE_PUBLIC_KEY}` is the device's public key in hexadecimal format (64 characters).
-
-## JSON Message Formats
-
-### Status Message
-```json
-{
-  "status": "online|offline",
-  "timestamp": "2024-01-01T12:00:00.000000+00:00",
-  "origin": "Device Name",
-  "origin_id": "DEVICE_PUBLIC_KEY",
-  "model": "device_model",
-  "firmware_version": "firmware_version",
-  "radio": "radio_info",
-  "client_version": "meshcore/{firmware_version}",
-  "repeat": "on|off",
-  "stats": {
-    "battery_mv": 4100,
-    "uptime_secs": 3600,
-    "packets_sent": 42,
-    "packets_received": 128,
-    "errors": 0,
-    "queue_len": 0,
-    "noise_floor": -110,
-    "tx_air_secs": 12,
-    "rx_air_secs": 340,
-    "recv_errors": 2,
-    "internal_heap": 102400
-  }
-}
-```
-
-**Notes:**
- Timestamps are always emitted in UTC with an explicit `+00:00` offset.
- The `stats` object is only included when at least one stat value is available; individual fields are omitted when their value is unavailable.
- `packets_sent` / `packets_received` are cumulative totals since boot (flood + direct), sourced from the dispatcher counters.
-
-### Packet Message
-```json
-{
-  "origin": "MeshCore-HOWL",
-  "origin_id": "A1B2C3D4E5F67890...",
-  "timestamp": "2024-01-01T12:00:00.000000+00:00",
-  "type": "PACKET",
-  "direction": "rx|tx",
-  "time": "12:00:00",
-  "date": "01/01/2024",
-  "len": "45",
-  "packet_type": "4",
-  "route": "F|D|T|U",
-  "payload_len": "32",
-  "raw": "F5930103807E5F1E...",
-  "SNR": "12.5",
-  "RSSI": "-65",
-  "score": "234",
-  "hash": "A1B2C3D4E5F67890",
-  "path": ["aa", "bb", "cc"]
-}
-```
-
-**Notes:**
- All numeric fields (`len`, `packet_type`, `payload_len`, `SNR`, `RSSI`, `score`) are formatted as JSON strings.
- `time` and `date` are always UTC (`HH:MM:SS` and `DD/MM/YYYY`); `timestamp` is UTC with an explicit `+00:00` offset.
- `SNR`, `RSSI`, and `score` are only present for RX packets (received from radio). TX packets omit these fields since the packet originates from this node.
- `score` is the firmware's rebroadcast score for the received packet (the same value used to compute flood-rebroadcast delay), scaled ×1000 to match the integer printed in the serial RX log — e.g. a score of `0.234` is emitted as `"234"` (range `0`–`1000`). It is recomputed at publish time from the packet's SNR and length via the radio's `packetScore()`, so it matches what the firmware used on receive. Omitted when unavailable (e.g. the non-PSRAM reconstruction-less fallback path).
- `path` is only present for direct-route packets that carry path data. It is a JSON array of lowercase hex hop tokens, one element per hop — e.g. `["aa","bb","cc"]` for single-byte hashes, or `["aaaa","bbbb"]` for multi-byte hashes. This matches the `path` representation emitted by [meshcore-packet-capture](https://github.com/agessaman/meshcore-packet-capture).
-
-### Raw Message
-```json
-{
-  "origin": "MeshCore-HOWL",
-  "origin_id": "A1B2C3D4E5F67890...",
-  "timestamp": "2024-01-01T12:00:00.000000+00:00",
-  "type": "RAW",
-  "data": "F5930103807E5F1E..."
-}
-```
-
-## Key Features
-
-### Slot-Based Preset System
- Up to 6 concurrent MQTT connections (with PSRAM), 2 without PSRAM
- Built-in presets for many community brokers (see the [preset table](#slot-based-preset-system))
- Custom broker support with username/password auth and custom topic templates
- JWT (Ed25519) for most preset brokers; MeshRank uses token-in-topic; TennMesh uses fixed username/password over plain MQTT
- WSS (WebSocket Secure), direct MQTT over TLS, and plain MQTT (TennMesh)
- Automatic reconnection with exponential backoff per slot
- Circuit breaker pattern with periodic probes for recovery from prolonged outages
- JWT token buffers only allocated for JWT-auth slots (memory efficient)
- Deferred construction: MQTTBridge is heap-allocated in `begin()` to avoid ESP32 static init crashes
-
-### Raw Radio Data Capture
- Captures actual raw radio transmission data (including radio headers)
- Uses proper MeshCore packet hashing (SHA256-based)
- Provides accurate SNR/RSSI values from actual radio reception (RX packets only)
- Independent RX and TX packet uplinking — both can be active simultaneously
- TX advert mode: selectively uplink only this node's own advert packets
-
-### Timezone Support
- Full timezone support with automatic DST handling
- Supports IANA timezone strings, common abbreviations, and UTC offsets
- Separates local time (for timestamps) and UTC time (for time/date fields)
- Uses JChristensen/Timezone library for accurate timezone conversions
-
-### WiFi Configuration
- Runtime WiFi credential management via CLI
- Persistent storage across reboots
- Automatic reconnection with exponential backoff
-
-### NTP Time Synchronization
- Automatic time synchronization with NTP servers (required for JWT authentication)
- Default primary: `pool.ntp.org`; built-in fallbacks (tried sequentially on failure): `time.google.com`, `time.cloudflare.com`, `time.aws.com`, `time.nist.gov`
- Custom primary via `set mqtt.ntp <hostname>`; `set mqtt.ntp none` reverts to default
- `set mqtt.ntp` runs an immediate sync (primary only, so a typo fails fast) when WiFi is connected and the bridge is running
- `get mqtt.ntp` returns the effective primary hostname
- `get mqtt.ntp.diag` probes every configured server (primary + fallbacks) for connectivity and reports each server's time without changing the system clock — a pure diagnostic
- Periodic time updates (every hour) on the effective primary only
- Proper UTC system time handling
-
-### Authentication
-The auth mode is fixed per preset (see the [preset table](#slot-based-preset-system)). Three modes are used:
- **JWT Authentication**: Ed25519-signed tokens for brokers that expect JWT (most WSS presets). For `custom` slots, JWT is used when `audience` is set.
- **Username/Password**: Some presets ship fixed credentials embedded in firmware (`tennmesh`, `nashmesh`, `ctmesh` — plain MQTT, no TLS); others (`inwmesh`, `custom`) take per-slot credentials via `mqttN.username` / `mqttN.password`.
- **None**: `meshrank` (account token carried in the topic) and `eastidahomesh` connect without broker auth.
- **Username Format** (JWT): `v1_{UPPERCASE_PUBLIC_KEY}`
- **Automatic Token Renewal**: Tokens are renewed before expiration
-
-## Migration from Old Configuration
-
-When upgrading from a firmware version that used the old MQTT configuration format (`mqtt.analyzer.us`, `mqtt.analyzer.eu`, `mqtt.server`, `mqtt.port`, `mqtt.username`, `mqtt.password`), the device automatically migrates settings:
-
- `mqtt.analyzer.us = on` → Slot 1 preset: `analyzer-us`
- `mqtt.analyzer.eu = on` → Slot 2 preset: `analyzer-eu`
- Custom server configured → Slot 3 preset: `custom` with host/port/username/password preserved
- All other settings (origin, IATA, message types, WiFi, timezone) are preserved as-is
-
-The migration happens automatically on first boot after firmware update. No manual intervention is needed.
-
-## First-Time Setup
-
-### Prerequisites
- MeshCore device with observer MQTT firmware flashed
- WiFi network credentials
- Serial console access (115200 baud) or repeater login via companion app
-
-### Step 1: Configure Radio (after fresh flash/full erase)
-
-If this is a fresh flash, radio parameters must be set to match your mesh network:
-```
-set radio 910.525,62.5,7,5
-set tx 22
-```
-
-### Step 2: Configure Device Identity
-```
-set name MyObserver
-set mqtt.iata SEA
-```
-
-If migrating from an existing device, restore the private key to keep the same identity:
-```
-set prv.key <your_64_hex_char_private_key>
-```
-
-### Step 3: Configure WiFi
-
-Use the rest of the line as the value (spaces allowed; no quotes). See [WiFi Commands](#wifi-commands).
-
-```
-set wifi.ssid YourWiFiNetwork
-set wifi.pwd YourWiFiPassword
-reboot
-```
-
-### Step 4: Configure Timezone (optional)
-```
-set timezone America/New_York
-```
-
-Or use an offset as a fallback:
-```
-set timezone.offset -5
-```
-
-### Step 5: (Optional) Disable Repeating
-
-For receive-only observers (e.g., using a PCB antenna or in a location where repeating is not desired):
-```
-set repeat off
-```
-
-### Step 6: Verify Slot Configuration
-```
-get mqtt1.preset    # Should show: analyzer-us
-get mqtt2.preset    # Should show: analyzer-eu
-get mqtt3.preset    # Should show: none
-```
-
-### Step 7: (Optional) Add Additional Presets
-```
-set mqtt3.preset meshmapper
-```
-
-### Step 8: Verify Connection
-```
-get bridge.enabled
-get mqtt.rx
-get mqtt.tx
-get mqtt.status
-get wifi.status
-```
-
-### Troubleshooting
-
-#### Device Won't Connect to WiFi
-```
-get wifi.ssid
-get wifi.pwd
-set wifi.powersave none    # Try disabling power saving
-reboot
-```
-
-#### No MQTT Messages Appearing
-```
-get bridge.enabled
-set bridge.enabled on
-get mqtt.rx                # Should be "on"
-set mqtt.rx on
-get mqtt.status            # Check per-slot connection status
-get mqtt1.diag             # Last slot error details (TLS/sock/time)
-get mqtt2.diag
-get mqtt3.diag
-get mqtt1.preset           # Verify slots are configured
-get mqtt.iata              # IATA must be set for MeshCore-topic presets (e.g. Analyzer, ColoradoMesh, TennMesh)
-```
-
-#### Timezone Issues
-```
-get timezone
-set timezone America/New_York    # IANA format
-set timezone EST                 # Abbreviation
-set timezone UTC-5               # UTC offset
-```
-
-## SNMP Monitoring
-
-Observer nodes include an optional SNMP v2c agent that exposes radio stats, MQTT connectivity, memory usage, and network information to standard monitoring tools. See [MQTT_SNMP.md](MQTT_SNMP.md) for setup and OID reference.
-
-
-## Fault Alerts
-
-Fault alerts broadcast LoRa group-channel notifications when WiFi or configured MQTT links stay down past configured thresholds, with optional recovery notices and rate limiting to avoid spam.
-For configuration, CLI commands, examples, and operational notes, see [ALERTS.md](ALERTS.md).
-
-## Radio Watchdog
-
-The radio watchdog detects a LoRa radio that appears stuck in RX mode but has stopped seeing any activity (valid packets, radio interrupts, or successful TX). When the configured silence interval is exceeded, the firmware idles the radio and restarts receive mode. This helps long-running MQTT observers recover from conditions such as PSRAM starvation that can cause missed radio interrupts without a full reboot.
-
-Activity is tracked from the most recent of: a valid RX, any radio ISR (including CRC errors), or a successful TX. That composite timestamp reduces false recoveries on quiet meshes where legitimate packet gaps can exceed the watchdog interval.
-
-#### Get Commands
- `get radio.watchdog` - Get watchdog interval in minutes (`0` = disabled)
-
-#### Set Commands
- `set radio.watchdog <minutes>` - Set watchdog interval (`0` to disable, or `1-120`)
-
-**Default:** `5` minutes
-
-**Examples:**
-```bash
-get radio.watchdog
-set radio.watchdog 10    # 10-minute silence before recovery
-set radio.watchdog 0     # disable watchdog
-```
-
-On very quiet meshes where no traffic is expected for long periods, increase the interval or set `0` to disable the watchdog and avoid unnecessary radio recoveries.
-
-## Developer Documentation
-
-For source layout, the seams that isolate the observer feature from upstream MeshCore code, and on-device settings migration across firmware versions, see [MQTT_INTERNALS.md](MQTT_INTERNALS.md).
@@ -1,96 +0,0 @@
-# MQTT Bridge Internals
-
-Developer-facing notes on how the MQTT observer feature is structured in the codebase: source files, the seams that keep it isolated from upstream MeshCore code, and how on-device settings are migrated across firmware versions. For user-facing setup and CLI reference, see [MQTT_IMPLEMENTATION.md](MQTT_IMPLEMENTATION.md).
-
-## Files
-
-### Core Implementation
- `src/helpers/bridges/MQTTBridge.h` - MQTT bridge class definition
- `src/helpers/bridges/MQTTBridge.cpp` - MQTT bridge implementation
- `src/helpers/MQTTPresets.h` - Preset definitions, CA certificates, and lookup functions
- `src/helpers/MQTTDefaults.h` - Compile-time defaults for fresh `/mqtt_prefs`
- `src/helpers/MQTTMessageBuilder.h` - JSON message formatting utilities
- `src/helpers/MQTTMessageBuilder.cpp` - JSON message formatting implementation
- `src/helpers/JWTHelper.h` - JWT token generation for Ed25519-based authentication
- `src/helpers/CommonCLI_Observer.cpp` - All observer CLI command handling (MQTT, WiFi,
-  timezone, NTP, OTA, SNMP, alerts)
-
-### Integration seams with upstream code
-
-The observer feature is kept out of upstream-tracked files through three mechanisms:
-
- **CLI hook methods** — upstream `CommonCLI.cpp` delegates to three `CommonCLI`
-  methods defined in the fork-owned `CommonCLI_Observer.cpp`: `handleObserverCommand()`,
-  `handleObserverSetCmd()`, and `handleObserverGetCmd()`. Each returns `true` if it
-  consumed the command, otherwise the upstream parser runs. Only these three call
-  sites touch upstream CLI code.
- **Callback virtuals** — observer behaviour needed from the application is exposed
-  as default-no-op virtuals on `CommonCLICallbacks` (e.g. `restartBridgeSlot`,
-  `isMqttBridgeRunning`, `syncMqttNtp`, `onAlertConfigChanged`, `sendAlertText`,
-  `resolveAlertScope`, `beginDeferredOtaUpdate`). The example apps override them
-  behind `#ifdef WITH_MQTT_BRIDGE`.
- **Separate settings file** — observer settings (MQTT slots, WiFi, timezone, SNMP,
-  radio watchdog, fault alerts) live in the `MQTTPrefs` struct persisted to
-  `/mqtt_prefs`, keeping `NodePrefs` / `/com_prefs` aligned with the upstream layout.
-
-Remaining integration points in upstream files:
- `examples/simple_repeater/MyMesh.{h,cpp}`, `examples/simple_room_server/MyMesh.{h,cpp}` -
-  bridge/alerter/SNMP wiring and packet-feed hooks, guarded by `#ifdef WITH_MQTT_BRIDGE`;
-  plus the `createObserverPacketManager()` call in each constructor (see below)
- `src/helpers/CommonCLI.{h,cpp}` - the three CLI hooks, `MQTTPrefs` load/save/migration
- `src/Dispatcher.{h,cpp}` - radio watchdog block, guarded by `#ifdef WITH_MQTT_BRIDGE`
-
-### Capture vs. duty-cycle throttling
-
-RX processing needs a free packet from the static pool before `logRx()` (and thus the
-MQTT uplink) can run — `Dispatcher::checkRecv()` silently discards received data when
-the pool is empty. Because the outbound queue holds pool packets with no expiry,
-duty-cycle throttling can park the entire pool waiting on TX budget, capping capture at
-the TX rate — and the parked repeats absorb every budget refill, starving the node's
-own CLI responses and making it un-administrable over the mesh. Observer builds
-therefore use `RxReservePacketManager` (fork-owned,
-`src/helpers/RxReservePacketManager.h`): below the RX reserve (a quarter of the pool)
-it sheds only low-priority outbound (multi-hop flood repeats, adverts, trace), keeping
-the node's own responses/ACKs queueable; below a smaller emergency floor it sheds
-everything to keep capture alive. Queued packets still untransmitted 30 s past their
-scheduled time are expired at dequeue, so under throttle the queue holds only fresh
-traffic and admin responses reach the trickle of TX budget. Non-observer builds keep
-the upstream pool behavior.
-
-### `/mqtt_prefs` file format
-
-`/mqtt_prefs` is written with an 8-byte `MQTTPrefsHeader` (`magic`, `version`,
-`payload_len`) followed by the raw `MQTTPrefs` payload. The magic is
-`{0xF5, 'M', 'Q', 'P'}` — its leading non-ASCII byte can never collide with the first
-bytes of a legacy (headerless) file, whose payload begins with the `mqtt_origin`
-string. Bump `MQTT_PREFS_VERSION` when the payload layout changes incompatibly; a file
-whose version this firmware doesn't recognize is left untouched and the in-memory prefs
-fall back to defaults (no downgrade, no misread). `saveMQTTPrefs()` also refuses to
-write while such a file is present (`_mqtt_prefs_hold`), so a `set` command after a
-firmware downgrade can't clobber the newer config — observer settings changed in that
-state simply don't persist. The frozen legacy layouts are pinned with `static_assert`s
-in `CommonCLI.h`, so every target build re-verifies the fleet's file offsets.
-
-Adding a field to the current version stays backward compatible: append it to the end
-of `MQTTPrefs`. An older, shorter payload still loads and the missing tail keeps its
-default; a newer, longer one is truncated harmlessly.
-
-### Settings upgrade / migration
-
-`loadPrefs()` handles every historical on-device format one-time at boot:
- **`/mqtt_prefs`** — if the file has the version header it is read directly. Otherwise
-  it is a legacy headerless file and its layout is detected by size: pre-slot
-  (`OldMQTTPrefs`), 3-slot (`ThreeSlotMQTTPrefs`), or the 6-slot layout shipped on
-  `mqtt-bridge-implementation-flex` (`Legacy6SlotMQTTPrefs`). Each is field-copied into
-  the current compact `MQTTPrefs` and re-saved with the version header — which also
-  drops the vestigial `_legacy_*` fields the flex layout carried mid-struct. This is a
-  one-time rewrite; every deployed device performs it on its first boot of versioned
-  firmware, after which all reads take the header path.
- **`/com_prefs`** — a file written by fork firmware that predates the `MQTTPrefs` split
-  (a zero-filled MQTT gap plus a trailing observer block) is detected by size; the
-  trailing SNMP / radio-watchdog / fault-alert settings and the `rx_boosted_gain` /
-  `flood_max_*` fields are recovered, carried into `/mqtt_prefs`, and both files are
-  rewritten in the current formats.
- Settings the pre-split firmware stored *inside* the `/com_prefs` MQTT gap (the MQTT
-  slot/WiFi config itself) are **not** recovered — users upgrading from firmware that
-  old must re-enter their MQTT and WiFi configuration.
@@ -1,149 +0,0 @@
-# SNMP Agent for MeshCore Observer Firmware
-
-This document describes the optional SNMP v2c agent that allows network monitoring tools to poll MeshCore observer nodes for health and performance metrics.
-
-## Overview
-
-The SNMP agent exposes radio statistics, MQTT connectivity status, memory usage, and network information via standard SNMP v2c GET/GETNEXT/GETBULK operations. It is designed for use with monitoring tools such as Nagios, Zabbix, LibreNMS, PRTG, or any SNMP-capable system.
-
- **Protocol**: SNMPv2c (read-only, no SET support)
- **Port**: UDP 161 (standard SNMP)
- **Library**: [0neblock/SNMP_Agent](https://github.com/0neblock/Arduino_SNMP)
- **Disabled by default** -- must be explicitly enabled via CLI
-
-## Quick Start
-
-```bash
-# Enable SNMP
-set snmp on
-reboot
-
-# Verify from a host on the same network
-snmpwalk -v2c -c public <device-ip> 1.3.6.1.4.1.99999
-```
-
-## CLI Commands
-
-| Command | Description |
-|---|---|
-| `get snmp` | Show SNMP agent status (`on` / `off`) |
-| `set snmp on` | Enable SNMP agent (restart required) |
-| `set snmp off` | Disable SNMP agent (restart required) |
-| `get snmp.community` | Show SNMP community string |
-| `set snmp.community <string>` | Set community string (restart required, default: `public`) |
-
-## OID Reference
-
-All OIDs are under the private enterprise subtree `1.3.6.1.4.1.99999` (`.iso.org.dod.internet.private.enterprises.99999`).
-
-### System (.1.x.0)
-
-| OID | Type | Description |
-|---|---|---|
-| `.1.1.0` | INTEGER | System uptime (seconds) |
-| `.1.2.0` | STRING | Firmware version |
-| `.1.3.0` | STRING | Node name |
-
-### Radio (.2.x.0)
-
-| OID | Type | Description |
-|---|---|---|
-| `.2.1.0` | INTEGER | Total packets received |
-| `.2.2.0` | INTEGER | Total packets sent |
-| `.2.3.0` | INTEGER | Receive errors (CRC failures, etc.) |
-| `.2.4.0` | INTEGER | Noise floor (dBm) |
-| `.2.5.0` | INTEGER | Last RSSI (dBm) |
-| `.2.6.0` | INTEGER | Last SNR (dB x 4) |
-| `.2.7.0` | INTEGER | Flood packets sent |
-| `.2.8.0` | INTEGER | Direct packets sent |
-| `.2.9.0` | INTEGER | Flood packets received |
-| `.2.10.0` | INTEGER | Direct packets received |
-| `.2.11.0` | INTEGER | Total air time (seconds) |
-
-### MQTT (.3.x.0)
-
-| OID | Type | Description |
-|---|---|---|
-| `.3.1.0` | INTEGER | Connected MQTT slot count |
-| `.3.2.0` | INTEGER | Packet queue depth |
-| `.3.3.0` | INTEGER | Skipped publishes (memory pressure) |
-
-### Memory (.4.x.0)
-
-| OID | Type | Description |
-|---|---|---|
-| `.4.1.0` | INTEGER | Free heap (bytes) |
-| `.4.2.0` | INTEGER | Max allocatable block (bytes) |
-| `.4.3.0` | INTEGER | Free internal RAM (bytes) |
-| `.4.4.0` | INTEGER | Free PSRAM (bytes, 0 if no PSRAM) |
-
-### Network (.5.x.0)
-
-| OID | Type | Description |
-|---|---|---|
-| `.5.1.0` | INTEGER | WiFi RSSI (dBm) |
-
-## Example Output
-
-```
-$ snmpwalk -v2c -c public 192.168.50.95 1.3.6.1.4.1.99999
-
-SNMPv2-SMI::enterprises.99999.1.1.0 = INTEGER: 18        # uptime 18s
-SNMPv2-SMI::enterprises.99999.1.2.0 = STRING: "v1.14.1"  # firmware
-SNMPv2-SMI::enterprises.99999.1.3.0 = STRING: "Heltec Repeater"
-SNMPv2-SMI::enterprises.99999.2.1.0 = INTEGER: 3         # 3 packets received
-SNMPv2-SMI::enterprises.99999.2.4.0 = INTEGER: -96       # noise floor -96 dBm
-SNMPv2-SMI::enterprises.99999.2.5.0 = INTEGER: -25       # last RSSI -25 dBm
-SNMPv2-SMI::enterprises.99999.4.1.0 = INTEGER: 199612    # ~195 KB free heap
-SNMPv2-SMI::enterprises.99999.4.2.0 = INTEGER: 188404    # ~184 KB max alloc
-SNMPv2-SMI::enterprises.99999.5.1.0 = INTEGER: -22       # WiFi RSSI -22 dBm
-```
-
-## Architecture
-
-The SNMP agent runs inside the existing MQTT FreeRTOS task on Core 0 (the WiFi/network core). No additional task is created.
-
- **Radio stats** are pushed from Core 1 (mesh task) every 2 seconds via `updateRadioStats()`
- **MQTT stats** are updated from Core 0 each MQTT task loop iteration
- **Memory and WiFi stats** are read directly in the SNMP loop on Core 0
-
-The agent starts automatically once WiFi connects and `snmp_enabled = 1` in prefs. It adds approximately 2-3 KB RAM overhead plus per-OID handler storage.
-
-## Build Configuration
-
-SNMP is enabled at compile time with the `WITH_SNMP=1` build flag and included in observer firmware targets:
-
- `heltec_v3_repeater_observer_mqtt`
- `heltec_v4_repeater_observer_mqtt`
- `Station_G2_repeater_observer_mqtt`
-
-To add SNMP to another observer variant, add the following to its `platformio.ini`:
-
-```ini
-build_flags =
-  ...
-  -D WITH_SNMP=1
-
-build_src_filter =
-  ...
-  +<helpers/SNMPAgent.cpp>
-
-lib_deps =
-  ...
-  0neblock/SNMP_Agent
-```
-
-## Files
-
-| File | Description |
-|---|---|
-| `src/helpers/SNMPAgent.h` | SNMP agent wrapper class declaration |
-| `src/helpers/SNMPAgent.cpp` | OID registration and stats update implementation |
-| `src/helpers/CommonCLI.h` | `NodePrefs` struct (`snmp_enabled`, `snmp_community` fields) |
-| `src/helpers/CommonCLI.cpp` | CLI command parsing and prefs persistence |
-| `src/helpers/bridges/MQTTBridge.cpp` | SNMP loop integration in `mqttTaskLoop()` |
-| `examples/simple_repeater/MyMesh.cpp` | Radio stats push and agent initialization |
-
-## Private Enterprise Number
-
-The OIDs currently use a temporary unregistered enterprise number (`99999`). A proper Private Enterprise Number (PEN) can be registered with IANA at no cost at https://pen.iana.org/pen/PenApplication.page.
@@ -7,8 +7,6 @@ MeshCore is a lightweight, portable C++ library that enables multi-hop packet ro
 MeshCore now supports a range of LoRa devices, allowing for easy flashing without the need to compile firmware manually. Users can flash a pre-built binary using tools like Adafruit ESPTool and interact with the network through a serial console.
 MeshCore provides the ability to create wireless mesh networks, similar to Meshtastic and Reticulum but with a focus on lightweight multi-hop packet routing for embedded projects. Unlike Meshtastic, which is tailored for casual LoRa communication, or Reticulum, which offers advanced networking, MeshCore balances simplicity with scalability, making it ideal for custom embedded solutions, where devices (nodes) can communicate over long distances by relaying messages through intermediate nodes. This is especially useful in off-grid, emergency, or tactical situations where traditional communication infrastructure is unavailable.

-> **MQTT Observer Setup** — If you're deploying an observer node with MQTT, see the [MQTT Implementation Guide](./MQTT_IMPLEMENTATION.md) for configuration, CLI commands, and troubleshooting.
-
 ## ⚡ Key Features

 * Multi-Hop Packet Routing
@@ -1,94 +0,0 @@
-# Restoring accidentally-reverted upstream features
-
-## Background
-
-On 2026-03-20, commit `22eb9b87` — *Revert "Merge remote-tracking branch 'origin/dev' into mqtt-bridge-implementation"* — reverted an entire upstream merge to escape a bad merge state, deleting 860 lines across 66 files. That was not intentional feature removal; it wholesale dropped a batch of upstream progress. When upstream was later re-merged, some collateral came back (MicroNMEA `claim()/release()`, the GAT562 board) but several upstream features were never reconciled and remained missing.
-
-This branch restores them. They are **pure upstream code the fork accidentally dropped**, so restoring re-aligns the fork with upstream and *reduces* the future merge-conflict surface rather than adding to it.
-
-## Phase 1 — duty-cycle enforcement (done on this branch)
-
-Restored the token-bucket duty-cycle enforcement and its cluster:
-
- `src/Dispatcher.{h,cpp}` — restored upstream's `updateTxBudget()`, `tx_budget_ms`,
-  `duty_cycle_window_ms`, `getRemainingTxBudget()`, `getDutyCycleWindowMs()`, and the
-  windowed `checkSend()`/`loop()` budget logic. The fork's MQTT **radio watchdog** was
-  re-applied on top as pure additions (behind `#ifdef WITH_MQTT_BRIDGE`).
- `src/helpers/StaticPoolPacketManager.{h,cpp}` — restored `getOutboundTotal()` and the
-  `0xFFFFFFFF` count-all sentinel in `countBefore()`.
- `src/helpers/StatsFormatHelper.h` — restored the `getOutboundTotal()` call; kept the
-  fork's `formatRadioDiag` template.
-
-Net effect: these files now diverge from upstream by **watchdog additions only (0 deletions)**
-instead of rewriting upstream's TX logic.
-
-### Why this is safe (no reinterpretation of stored settings)
-
-`getAirtimeBudgetFactor()` changed *meaning* between fork and upstream, but the resulting
-duty cycle is the **same formula**:
- Fork: `next_tx = t · factor` → duty ≈ `1/(1+factor)`
- Upstream: `duty = 1/(1+factor)` enforced over a rolling window
-
-So a device's stored `airtime_factor` (a `NodePrefs` field, unchanged) keeps its meaning.
-The only behavioral difference is upstream enforces it over a 1-hour window (allowing
-short bursts) instead of rigid per-packet spacing — a strict improvement, and the
-mechanism that keeps EU 868 MHz nodes under the legally-mandated duty cycle.
-
-### Must be validated on-device before merge
-
-This touches core TX timing. Confirm on hardware — **all device-confirmed 2026-07-09/10
-on a Heltec V4.2 (busy live mesh + off-frequency bench):**
- ✅ Normal traffic still flows (repeater forwards, observer uplinks).
- ✅ Sustained TX is throttled to the configured duty cycle: at `set dutycycle 1` on a
-  busy mesh, TX pinned to ~1% while MQTT capture continued at full rate (after the
-  `RxReservePacketManager` fixes below). Remote admin remains usable under throttle
-  with the priority-shed + stale-expiry policy.
- ✅ CAD enabled under load: TX, capture, and CLI all normal.
- ✅ The observer radio watchdog fires and recovers non-destructively: with
-  `radio.watchdog 1` on a silent frequency, `err_flags` bit 8 set, radio remained in
-  RX state through repeated recovery cycles, and packets were still received after.
-  Note: firings are invisible on release builds (no MESH_DEBUG) — check
-  `stats-radio-diag` `err_flags`; the watchdog arms only after first radio activity
-  (`last_active > 0`), so a radio wedged from boot is deliberately not covered.
-
-Remaining before undraft: passive soak at fleet-default `airtime_factor` (duty
-convergence, flat heap, adverts still advertised).
-
-### Known interaction: throttling starves MQTT capture (mitigated)
-
-Found during the on-device duty-cycle load test (`set dutycycle 1`): queued
-retransmissions hold static-pool packets with no expiry, so heavy throttling parks the
-whole pool in the send queue. `Dispatcher::checkRecv()` then drops received packets
-before `logRx()` runs, capping MQTT capture at the TX rate (each TX frees one packet
-for one RX). Parked repeats also absorb every budget refill, starving the node's own
-CLI responses — device-confirmed: a 1%-duty node on a busy mesh became
-un-administrable within ~2 minutes. This is inherent upstream behavior — the old
-fork's `next_tx` spacing had the same steady-state drain — but it defeats the
-observer's purpose. Mitigated on observer builds by `RxReservePacketManager`
-(`src/helpers/RxReservePacketManager.h`): priority-aware shedding below a pool
-reserve (own responses/ACKs stay queueable) plus 30 s expiry of stale queued
-outbound. See MQTT_INTERNALS.md "Capture vs. duty-cycle throttling".
-
-## Phase 2 — CAD and FEM RX gain (NOT done; needs care + device testing)
-
-Still missing at HEAD, also dropped by `22eb9b87`, still present upstream:
-
- **`cad_enabled`** — hardware Channel Activity Detection (listen-before-talk) before TX.
-  The `Dispatcher`/`Radio` interface (`setCADEnabled`/`getCADEnabled`) is restored by
-  Phase 1, so CAD currently stays **off by default** (unchanged behavior). To make it
-  configurable again, restore:
-  - `NodePrefs.cad_enabled` field, its CLI get/set, and its persistence in
-    `CommonCLI.cpp` (`loadPrefsInt`/`savePrefs`). **Offset care:** this branch's
-    `/com_prefs` layout is carefully managed — add `cad_enabled` following the same
-    append-and-size-guard pattern used for `rx_boosted_gain`/`flood_max_*`, and add a
-    host-side round-trip test (see `scratchpad/migtest`).
-  - The `MyMesh::getCADEnabled()` override returning `_prefs.cad_enabled`.
-  - `RadioLibWrappers::setCADEnabled()` override so the hardware CAD is actually driven
-    (the fork's wrapper currently doesn't override it).
- **`radio_fem_rxgain`** — LoRa front-end-module RX gain. Restore `NodePrefs.radio_fem_rxgain`
-  + CLI + persistence (same offset care), plus the per-board FEM wiring reverted across
-  ~20 `variants/*/target.cpp` and the `heltec_tracker_v2/LoRaFEMControl.{cpp,h}` files.
-  This is board-specific and only affects FEM-equipped hardware.
-
-Phase 2 is lower urgency than duty-cycle enforcement (CAD/FEM are capability gaps, not a
-compliance regression) and is best done as its own change with per-board hardware testing.
@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "opi",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_rc32"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec RC32 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/",
+  "vendor": "Heltec"
+}
@@ -39,7 +39,7 @@
    "frameworks": ["arduino"],
    "name": "Heltec nrf (Adafruit BSP)",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
@@ -42,7 +42,7 @@
  ],
  "name": "Heltec Mesh Solar Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
@@ -42,7 +42,7 @@
  ],
  "name": "Heltec T114 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
@@ -9,7 +9,7 @@
    "extra_flags": [
      "-DBOARD_HAS_PSRAM",
      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
      "-DARDUINO_RUNNING_CORE=1",
      "-DARDUINO_EVENT_RUNNING_CORE=1"
    ],
@@ -40,4 +40,4 @@
  },
  "url": "https://heltec.org/",
  "vendor": "heltec"
-}
+}
@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "opi",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_v4_r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "heltec_wifi_lora_32 v4 r8 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/",
+  "vendor": "heltec"
+}
@@ -60,7 +60,7 @@
    ],
    "name": "Keepteen LT1",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_opi"
+      },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "opi",
+    "hwids": [["0x303A", "0x0002"], ["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "meshnology_w12"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "heltec_wifi_lora_32 v5 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/",
+  "vendor": "heltec"
+}
@@ -55,7 +55,7 @@
  ],
  "name": "Meshtiny",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
@@ -1,59 +1,59 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "me25ls01-BOOT",
-    "mcu": "nrf52840",
-    "variant": "minewsemi_me25ls01",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Minewsemi ME25LS01",
-  "upload": {
-    "maximum_ram_size": 235520,
-    "maximum_size": 811008,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01",
-  "vendor": "MINEWSEMI"
-}
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "me25ls01-BOOT",
+    "mcu": "nrf52840",
+    "variant": "minewsemi_me25ls01",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Minewsemi ME25LS01",
+  "upload": {
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01",
+  "vendor": "MINEWSEMI"
+}
@@ -54,7 +54,7 @@
    ],
    "name": "BQ nRF52840",
    "upload": {
-        "maximum_ram_size": 248832,
+        "maximum_ram_size": 235520,
        "maximum_size": 815104,
        "speed": 115200,
        "protocol": "nrfutil",
@@ -7,9 +7,6 @@ MEMORY
 {
  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000

-  /* To keep data in RAM across resets */
-  PERSISTENT_RAM (rwx) : ORIGIN = 0x20006000, LENGTH = 8
-
  /* SRAM required by Softdevice depend on
   * - Attribute Table Size (Number of Services and Characteristics)
   * - Vendor UUID count
@@ -17,19 +14,11 @@ MEMORY
   * - Concurrent connection peripheral + central + secure links
   * - Event Len, HVN queue, Write CMD queue
   */ 
-  RAM (rwx) :  ORIGIN = 0x20006000 + 8, LENGTH = 0x20040000 - 0x20006000 - 8
+  RAM (rwx) :  ORIGIN = 0x20006000, LENGTH = 0x20040000 - 0x20006000
 }

 SECTIONS
 {
-  . = ALIGN(4);
-  .persistent (NOLOAD) :
-  {
-    KEEP(*(.persistent_magic))
-    KEEP(*(.persistent_data))
-    . = ALIGN(4);
-  } > PERSISTENT_RAM
-
  . = ALIGN(4);
  .svc_data :
  {
@@ -44,6 +33,6 @@ SECTIONS
    KEEP(*(.fs_data))
    PROVIDE(__stop_fs_data = .);
  } > RAM
-}
+} INSERT AFTER .data;

 INCLUDE "nrf52_common.ld"
@@ -7,9 +7,6 @@ MEMORY
 {
  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xD4000 - 0x26000

-  /* To keep data in RAM across resets */
-  PERSISTENT_RAM (rwx) : ORIGIN = 0x20006000, LENGTH = 8
-
  /* SRAM required by Softdevice depend on
   * - Attribute Table Size (Number of Services and Characteristics)
   * - Vendor UUID count
@@ -17,19 +14,11 @@ MEMORY
   * - Concurrent connection peripheral + central + secure links
   * - Event Len, HVN queue, Write CMD queue
   */ 
-  RAM (rwx) :  ORIGIN = 0x20006000 + 8, LENGTH = 0x20040000 - 0x20006000 - 8
+  RAM (rwx) :  ORIGIN = 0x20006000, LENGTH = 0x20040000 - 0x20006000
 }

 SECTIONS
 {
-  . = ALIGN(4);
-  .persistent (NOLOAD) :
-  {
-    KEEP(*(.persistent_magic))
-    KEEP(*(.persistent_data))
-    . = ALIGN(4);
-  } > PERSISTENT_RAM
-
  . = ALIGN(4);
  .svc_data :
  {
@@ -44,6 +33,6 @@ SECTIONS
    KEEP(*(.fs_data))
    PROVIDE(__stop_fs_data = .);
  } > RAM
-}
+} INSERT AFTER .data;

 INCLUDE "nrf52_common.ld"
@@ -7,9 +7,6 @@ MEMORY
 {
  FLASH (rx)     : ORIGIN = 0x27000, LENGTH = 0xED000 - 0x27000

-  /* To keep data in RAM across resets */
-  PERSISTENT_RAM (rwx) : ORIGIN = 0x20006000, LENGTH = 8
-
  /* SRAM required by Softdevice depend on
   * - Attribute Table Size (Number of Services and Characteristics)
   * - Vendor UUID count
@@ -17,19 +14,11 @@ MEMORY
   * - Concurrent connection peripheral + central + secure links
   * - Event Len, HVN queue, Write CMD queue
   */ 
-  RAM (rwx) :  ORIGIN = 0x20006000 + 8, LENGTH = 0x20040000 - 0x20006000 - 8
+  RAM (rwx) :  ORIGIN = 0x20006000, LENGTH = 0x20040000 - 0x20006000
 }

 SECTIONS
 {
-  . = ALIGN(4);
-  .persistent (NOLOAD) :
-  {
-    KEEP(*(.persistent_magic))
-    KEEP(*(.persistent_data))
-    . = ALIGN(4);
-  } > PERSISTENT_RAM
-
  . = ALIGN(4);
  .svc_data :
  {
@@ -44,6 +33,6 @@ SECTIONS
    KEEP(*(.fs_data))
    PROVIDE(__stop_fs_data = .);
  } > RAM
-}
+} INSERT AFTER .data;

 INCLUDE "nrf52_common.ld"
@@ -7,9 +7,6 @@ MEMORY
 {
  FLASH (rx)     : ORIGIN = 0x27000, LENGTH = 0xD4000 - 0x27000

-  /* To keep data in RAM across resets */
-  PERSISTENT_RAM (rwx) : ORIGIN = 0x20006000, LENGTH = 8
-
  /* SRAM required by Softdevice depend on
   * - Attribute Table Size (Number of Services and Characteristics)
   * - Vendor UUID count
@@ -17,19 +14,11 @@ MEMORY
   * - Concurrent connection peripheral + central + secure links
   * - Event Len, HVN queue, Write CMD queue
   */ 
-  RAM (rwx) :  ORIGIN = 0x20006000 + 8, LENGTH = 0x20040000 - 0x20006000 - 8
+  RAM (rwx) :  ORIGIN = 0x20006000, LENGTH = 0x20040000 - 0x20006000
 }

 SECTIONS
 {
-  . = ALIGN(4);
-  .persistent (NOLOAD) :
-  {
-    KEEP(*(.persistent_magic))
-    KEEP(*(.persistent_data))
-    . = ALIGN(4);
-  } > PERSISTENT_RAM
-
  . = ALIGN(4);
  .svc_data :
  {
@@ -44,6 +33,6 @@ SECTIONS
    KEEP(*(.fs_data))
    PROVIDE(__stop_fs_data = .);
  } > RAM
-}
+} INSERT AFTER .data;

 INCLUDE "nrf52_common.ld"
@@ -60,7 +60,7 @@
    ],
    "name": "ProMicro NRF52840",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
@@ -54,7 +54,7 @@
  ],
  "name": "WisCore RAK3401 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
@@ -54,7 +54,7 @@
  ],
  "name": "WisCore RAK4631 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
@@ -0,0 +1,60 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"],
+      ["0x2886", "0x0057"]
+    ],
+    "usb_product": "X1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_Mesh-Tracker-X1",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed SenseCAP MeshTracker X1",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/SenseCAP-MeshTracker-X1-for-Meshtastic-p-6793.html",
+  "vendor": "Seeed Studio"
+}
@@ -40,7 +40,7 @@
  ],
  "name": "Seeed Wio Tracker L1",
  "upload": {
-    "maximum_ram_size": 237568,
+    "maximum_ram_size": 235520,
    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
@@ -40,7 +40,7 @@
  ],
  "name": "Seeed Studio XIAO nRF52840",
  "upload": {
-    "maximum_ram_size": 237568,
+    "maximum_ram_size": 235520,
    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
@@ -39,8 +39,8 @@
  ],
  "name": "Seeed Studio XIAO nRF52840",
  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
    "protocols": [
@@ -45,7 +45,7 @@
  ],
  "name": "LilyGo T-ECHO",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "require_upload_port": true,
    "speed": 115200,
@@ -2,7 +2,6 @@
    "build": {
        "arduino": {
            "ldscript": "esp32s3_out.ld",
-            "partitions": "default_16MB.csv",
            "memory_type": "qio_opi"
        },
        "core": "esp32",
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow eink",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow nrf",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow solar",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
@@ -38,8 +38,8 @@
  "frameworks": ["arduino"],
  "name": "Seeed T1000-E",
  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
    "speed": 115200,
    "protocol": "nrfutil",
    "protocols": [
@@ -1,136 +0,0 @@
-#!/usr/bin/env bash
-# ./build-iotthinks.sh
-export FIRMWARE_VERSION="PowerSaving16"
-
-############# Repeaters #############
-# Commonly-used boards
-## ESP32 - 17 boards
-./build.sh build-firmware \
-Heltec_v3_repeater \
-Heltec_WSL3_repeater \
-heltec_v4_repeater \
-Station_G2_repeater \
-T_Beam_S3_Supreme_SX1262_repeater \
-Tbeam_SX1262_repeater \
-LilyGo_T3S3_sx1262_repeater \
-Xiao_S3_WIO_repeater \
-Xiao_C3_repeater \
-Xiao_C6_repeater_ \
-Heltec_E290_repeater \
-Heltec_Wireless_Tracker_repeater \
-LilyGo_TBeam_1W_repeater \
-Xiao_S3_repeater \
-heltec_tracker_v2_repeater \
-Heltec_Wireless_Paper_repeater \
-Heltec_ct62_repeater
-
-## NRF52 - 17 boards
-./build.sh build-firmware \
-RAK_4631_repeater \
-Heltec_t114_repeater \
-Xiao_nrf52_repeater \
-Heltec_mesh_solar_repeater \
-ProMicro_repeater \
-SenseCap_Solar_repeater \
-t1000e_repeater \
-LilyGo_T-Echo_repeater \
-WioTrackerL1_repeater \
-RAK_3401_repeater \
-RAK_WisMesh_Tag_repeater \
-GAT562_30S_Mesh_Kit_repeater \
-GAT562_Mesh_Tracker_Pro_repeater \
-ikoka_nano_nrf_22dbm_repeater \
-ikoka_nano_nrf_30dbm_repeater \
-ikoka_nano_nrf_33dbm_repeater \
-ThinkNode_M1_repeater \
-Heltec_t096_repeater
-
-## ESP32, SX1276 - 3 boards
-./build.sh build-firmware \
-Heltec_v2_repeater \
-LilyGo_TLora_V2_1_1_6_repeater \
-Tbeam_SX1276_repeater
-
-############# Room Server #############
-# ESP32 - 7 boards
-./build.sh build-firmware \
-Heltec_v3_room_server \
-heltec_v4_room_server \
-LilyGo_TBeam_1W_room_server \
-Heltec_WSL3_room_server \
-Xiao_S3_room_server \
-heltec_tracker_v2_room_server \
-Heltec_Wireless_Paper_room_server
-
-# NRF52 - 6 boards
-./build.sh build-firmware \
-RAK_4631_room_server \
-Heltec_t114_room_server \
-Xiao_nrf52_room_server \
-t1000e_room_server \
-WioTrackerL1_room_server \
-RAK_3401_room_server \
-Heltec_t096_room_server
-
-############# Companions BLE #############
-# NRF52 - 12 boards
-./build.sh build-firmware \
-RAK_4631_companion_radio_ble \
-Heltec_t114_companion_radio_ble \
-Xiao_nrf52_companion_radio_ble \
-t1000e_companion_radio_ble \
-LilyGo_T-Echo_companion_radio_ble \
-WioTrackerL1_companion_radio_ble \
-RAK_3401_companion_radio_ble \
-RAK_WisMesh_Tag_companion_radio_ble \
-SenseCap_Solar_companion_radio_ble \
-ThinkNode_M1_companion_radio_ble \
-Heltec_t096_companion_radio_ble \
-Heltec_t096_companion_radio_ble_femoff
-
-############# Companions BLE PS #############
-# ESP32 - 18 boards
-./build.sh build-firmware \
-Heltec_v3_companion_radio_ble_ps \
-heltec_v4_companion_radio_ble_ps \
-heltec_v4_3_companion_radio_ble_ps_femoff \
-Xiao_C3_companion_radio_ble_ps \
-Xiao_S3_companion_radio_ble_ps \
-Xiao_S3_WIO_companion_radio_ble_ps \
-Heltec_v2_companion_radio_ble_ps \
-LilyGo_TBeam_1W_companion_radio_ble_ps \
-Heltec_WSL3_companion_radio_ble_ps \
-Heltec_Wireless_Tracker_companion_radio_ble_ps \
-heltec_tracker_v2_companion_radio_ble_ps \
-Heltec_Wireless_Paper_companion_radio_ble_ps \
-LilyGo_TLora_V2_1_1_6_companion_radio_ble_ps \
-Heltec_ct62_companion_radio_ble_ps \
-T_Beam_S3_Supreme_SX1262_companion_radio_ble_ps \
-Tbeam_SX1262_companion_radio_ble_ps \
-heltec_v4_expansionkit_tft_companion_radio_ble_ps \
-LilyGo_T3S3_sx1262_companion_radio_ble_ps
-
-# Not working
-# Tbeam_SX1276_companion_radio_ble_ps
-
-############# Companions USB #############
-./build.sh build-firmware \
-Heltec_t096_companion_radio_usb
-
-############# Sample builds #############
-# 14 boards
-./build.sh build-firmware \
-Heltec_v3_repeater \
-heltec_v4_repeater \
-Xiao_C3_repeater \
-Xiao_C6_repeater_ \
-RAK_4631_repeater \
-Heltec_t096_repeater \
-Heltec_v3_companion_radio_ble_ps \
-heltec_v4_companion_radio_ble_ps \
-heltec_v4_3_companion_radio_ble_ps_femoff \
-Xiao_C3_companion_radio_ble_ps \
-Xiao_C6_companion_radio_ble_ \
-RAK_4631_companion_radio_ble \
-Heltec_t096_companion_radio_ble \
-Heltec_t096_companion_radio_ble_femoff
@@ -440,6 +440,8 @@ Byte 0: 0x14
    - Uses a secret key derived from the channel name
    - It is the first 16 bytes of `sha256("#test")`
    - For example hashtag channel `#test` has the key: `9cd8fcf22a47333b591d96a2b848b73f`
+    - Traffic is encrypted on air, but anyone who knows or guesses the channel
+      name can derive the key. Hashtag channels should not be treated as private.
    - Used as a topic based public group chat, separate from the default public channel
 3. **Private Channels**
    - Uses a randomly generated 16-byte secret key
@@ -83,6 +83,7 @@ A list of frequently-asked questions and answers for MeshCore
    - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code)
    - [7.6. Q: How do I connect to the companion via Wi-Fi, e.g. using a Heltec V3?](#76-q-how-do-i-connect-to-the-companion-via-wi-fi-eg-using-a-heltec-v3)
    - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with an EByte E22-900M30S or an EByte E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-an-ebyte-e22-900m30s-or-an-ebyte-e22-900m33s-module-what-should-their-transmit-power-be-set-to)
+    - [7.8. Q: How do I use Ethernet with a RAK4631?](#78-q-how-do-i-use-ethernet-with-a-rak4631)

 ## 1. Introduction

@@ -760,9 +761,9 @@ After this bootloader is flashed onto the device, you can trigger an over-the-ai
 2. From the MeshCore app, log in remotely to the repeater you want to update with admin privileges.
 3. Go to the Command Line tab, type `start ota` and hit enter.
 4. You should see `OK` to confirm the repeater device is now in OTA mode.
-5. If the ESP32 is not already joined to Wi-Fi, `start ota` starts an open hotspot named `MeshCore-OTA` at `192.168.4.1`. If it is already joined, the command reports and uses its router-assigned address instead.
-6. From your phone or computer, connect to the `MeshCore-OTA` hotspot when one was started.
-7. Open the URL reported by `start ota` and upload the non-merged bin from the flasher. When the device started `MeshCore-OTA`, the URL is <http://192.168.4.1/update>.
+5. The command `start ota` on an ESP32-based device starts a Wi-Fi hotspot named `MeshCore OTA`.
+6. From your phone or computer connect to the 'MeshCore OTA' hotspot.
+7. From a browser, go to <http://192.168.4.1/update> and upload the non-merged bin from the flasher.


 ### 7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?
@@ -800,13 +801,8 @@ Where `&type` is:

 ### 7.6. Q: How do I connect to the companion via Wi-Fi, e.g. using a Heltec V3?
 **A:**
-Flash a companion Wi-Fi build. If it has no saved Wi-Fi configuration, it starts an open `MeshCore-Setup` access point. Join it, browse to <http://192.168.4.1/>, and submit the network SSID and password. The device saves the credentials only after a successful connection. The page and device screen then show the station IP assigned by your router.
-
-If a saved network remains unreachable for two minutes, `MeshCore-Setup` starts as a fallback. The node retries the saved SSID and password every two minutes while the setup AP is open. If the original network returns, the node reconnects and closes `MeshCore-Setup` automatically.
-
-The setup AP always uses `192.168.4.1`; the companion's station IP is assigned by DHCP and can be different. A real `WIFI_SSID` and `WIFI_PWD` can still be supplied at compile time as initial defaults, but they are no longer required.
-
-The `Heltec_v3_companion_radio_wifi_mqtt` and `heltec_v4_companion_radio_wifi_mqtt` builds use a two-stage first-run setup. The open `MeshCore-Setup` AP serves only the SSID/password form at <http://192.168.4.1/>. After the companion joins that network, reconnect your phone or computer to the same network and open the station IP shown on the setup page or device screen. That second, station-only page asks for the MQTT preset or broker, routing identity, credentials, and publish options. It remains available at the node's station IP so MQTT settings can be changed later; the companion interface remains available on TCP port `5000`.
+Wi-Fi firmware requires you to compile it yourself, as you need to set the Wi-Fi SSID and password.
+Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then flash it to your device.

 ### 7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with an EByte E22-900M30S or an EByte E22-900M33S module, what should their transmit power be set to?
 **A:**
@@ -825,3 +821,29 @@ For companion radios, you can set these radios' transmit power in the smartphone
 | **Ikoka Stick E22-900M33S**                                                        | 2W Model                            | 9 dBm                | 2W                     | **DO NOT EXCEED** (Risk of burn out) [data sheet](https://www.cdebyte.com/pdf-down.aspx?id=4216) Refer to your local government's requirements |
 | **Heltec V4**                                                                      | Standard Output                     | 10 dBm               | 22 dBm (~0.15W)        |                                                                                                                                                |
 |                                                                                    | High Output                         | 22 dBm               | 28 dBm (~0.5W to 0.6W) |                                                                                                                                                |
+
+---
+
+### 7.8. Q: How do I use Ethernet with a RAK4631?
+ **A:**
+MeshCore supports Ethernet on RAK4631 boards using the [RAK13800](https://docs.rakwireless.com/product-categories/wisblock/rak13800/datasheet/) WisBlock Ethernet module (based on the W5100S chip).
+
+**Hardware required:**
+- RAK4631 WisBlock Core
+- RAK19007 or RAK19018 WisBlock Base Board (with an available IO slot)
+- RAK13800 WisBlock Ethernet module
+- Ethernet cable connected to a network with a DHCP server
+
+**Firmware:**
+Flash one of the Ethernet-enabled firmware variants:
+- `RAK_4631_repeater_ethernet` - Repeater with Ethernet CLI access
+- `RAK_4631_room_server_ethernet` - Room server with Ethernet CLI access
+- `RAK_4631_companion_radio_ethernet` - Companion radio over Ethernet (replaces BLE)
+
+**Connecting:**
+- The device obtains an IP address via DHCP automatically on boot.
+- For repeaters and room servers, connect to the device on TCP port 23 using any TCP client (e.g. `nc <ip> 23` or PuTTY in raw mode). This gives you the same CLI available over serial/USB.
+- For companion radio firmware, the Ethernet interface replaces BLE as the transport to companion apps. Connect on TCP port 5000 (same as the WiFi companion radio).
+- Use the `eth.status` CLI command to check connection status and see the assigned IP address.
+
+---
@@ -1,227 +0,0 @@
-# Repeater Flood Filtering and Moderation
-
-This guide explains the Keymind repeater forwarding filters. The filters decide
-whether this repeater retransmits a packet. They do not stop local reception,
-packet logging, or MQTT observation.
-
-Only flood routes are filtered:
-
- `0x00` / `ROUTE_TYPE_TRANSPORT_FLOOD` — flood routing with transport codes
- `0x01` / `ROUTE_TYPE_FLOOD` — unscoped flood routing
-
-Direct routes `0x02` and `0x03` are never affected by these rules.
-The route and payload values follow the upstream
-[packet-format reference](https://docs.meshcore.io/packet_format/) and
-[payload layouts](https://docs.meshcore.io/payloads/), with this fork's LoRa
-OTA assignment noted below.
-
-## Before making changes
-
-Show the current forwarding controls:
-
-```text
-get repeat
-get flood.max
-get flood.max.unscoped
-get flood.max.advert
-get flood.channel.data
-get flood.channel.data.hops
-get flood.channel.block
-get flood.filter
-get flood.moderation
-```
-
-The `flood.filter` and `flood.moderation` tables each have 16 persistent slots.
-They are empty by default. A corrupt or truncated table fails open, so corrupt
-storage does not silently enable blocking.
-
-## Filter by payload type and received hop count
-
-Use `flood.filter` when the packet type and its current path length are enough
-to make the decision:
-
-```text
-set flood.filter <type> <hops>
-set flood.filter.<slot> <type> <hops>
-get flood.filter
-get flood.filter.<slot>
-del flood.filter.<slot>
-del flood.filter all
-```
-
-Without a slot number, `set` reuses an identical rule or selects the first empty
-slot. With a slot number, it replaces that slot.
-
-Hop expressions are based on the path count when this repeater receives the
-packet:
-
- `N` matches exactly `N` received hops.
- `N+` matches `N` or more received hops.
- `N-M` matches the inclusive range.
- `all` matches `0` through `63` hops.
-
-Examples:
-
-```text
-# Stop forwarding group data once it arrives with four or more path entries.
-set flood.filter grp_data 4+
-
-# Stop long adverts, while still allowing shorter adverts.
-set flood.filter.2 advert 6+
-
-# Keep LoRa OTA floods from crossing this repeater at path counts 2 through 4.
-set flood.filter.3 ota 2-4
-
-# Apply a hard ceiling to every flood payload type.
-set flood.filter any 12+
-```
-
-Accepted payload names are:
-
-| Value | Short name | Full name |
-| --- | --- | --- |
-| `0x00` | `req` | `PAYLOAD_TYPE_REQ` |
-| `0x01` | `response` | `PAYLOAD_TYPE_RESPONSE` |
-| `0x02` | `txt_msg` | `PAYLOAD_TYPE_TXT_MSG` |
-| `0x03` | `ack` | `PAYLOAD_TYPE_ACK` |
-| `0x04` | `advert` | `PAYLOAD_TYPE_ADVERT` |
-| `0x05` | `grp_txt` | `PAYLOAD_TYPE_GRP_TXT` |
-| `0x06` | `grp_data` | `PAYLOAD_TYPE_GRP_DATA` |
-| `0x07` | `anon_req` | `PAYLOAD_TYPE_ANON_REQ` |
-| `0x08` | `path` | `PAYLOAD_TYPE_PATH` |
-| `0x09` | `trace` | `PAYLOAD_TYPE_TRACE` |
-| `0x0A` | `multipart` | `PAYLOAD_TYPE_MULTIPART` |
-| `0x0B` | `control` | `PAYLOAD_TYPE_CONTROL` |
-| `0x0C` | `ota` | `PAYLOAD_TYPE_OTA` in this fork |
-| `0x0D` | `13` | reserved |
-| `0x0E` | `14` | reserved |
-| `0x0F` | `raw_custom` | `PAYLOAD_TYPE_RAW_CUSTOM` |
-
-The numeric values `0` through `15`, the full `PAYLOAD_TYPE_*` names, and
-`any` are also accepted. Upstream currently reserves `0x0C`; this fork assigns
-it to LoRa OTA.
-
-## Moderate group text by channel and username
-
-Use `flood.moderation` for flood `GRP_TXT` messages. The repeater validates and
-decrypts the selected channel, extracts the display name before the first `:`,
-then applies the rule:
-
-```text
-set flood.moderation <channel> <sender> <action> [action...]
-set flood.moderation.<slot> <channel> <sender> <action> [action...]
-get flood.moderation
-get flood.moderation.<slot>
-del flood.moderation.<slot>
-del flood.moderation all
-```
-
-Channels can be specified as:
-
- `public` for the built-in Public channel
- `#name` for a well-known hashtag channel
- a 128-bit or 256-bit channel key in hexadecimal
-
-The key is stored locally so packets can be authenticated and decrypted. It is
-not included in `get flood.moderation` output.
-
-Available actions are:
-
- `drop` — do not retransmit any matching message
- `rate=X/min` — retransmit at most `X` messages per local 60-second window
- `hops=N` — do not retransmit when the received path count is `N` or higher
- `path=H1[,H2,H3]` — require the first one to three path hashes to match
- `path=*` — match every path; this is the default
-
-At least one of `drop`, `rate=X/min`, or `hops=N` is required. Rate and hop
-limits can be combined. `rate=0/min` is equivalent to `drop`.
-
-### Per-user, per-channel rate limits
-
-Rate limits require an exact username; `*` is not accepted for a rate rule.
-Username comparison is ASCII case-insensitive, and names containing spaces must
-be quoted. A rule's counter is independent from rules for the same name on
-other channels, so this directly supports “X messages per minute from user X
-on channel Y.” Counters are local to this repeater and reset on reboot.
-
-```text
-# At most five Public-channel messages per minute from this display name.
-set flood.moderation public "Noisy User" rate=5/min
-
-# A separate limit for the same name on #local.
-set flood.moderation #local "Noisy User" rate=10/min
-
-# Combine a rate limit with a maximum forwarding distance.
-set flood.moderation public alice rate=4/min hops=5
-```
-
-### Match the start of a path
-
-Path matching accepts one-, two-, or three-byte hashes. Every hash in one rule
-must use the same width, and matching always starts at the beginning of the
-received path:
-
-```text
-set flood.moderation #local bot drop path=A1B2C3,D4E5F6
-set flood.moderation public alice rate=3/min path=71
-```
-
-A path-qualified rule cannot match a zero-hop packet and does not match until
-the packet contains all path entries listed by the rule.
-
-## How the forwarding controls combine
-
-A flood packet is retransmitted only if it passes every applicable control. In
-other words, the controls combine as deny rules:
-
-1. `repeat`, `flood.max*`, and the channel-data gate are checked.
-2. `flood.filter` checks payload type and hop range.
-3. `flood.channel.block` checks keyed channels.
-4. Region and loop-detection rules are checked.
-5. `flood.moderation` checks decrypted group text, username, rate, hops, and path.
-
-The first denial is enough to prevent retransmission. A packet that is denied
-can still appear in local logs or MQTT output. Moderation runs last because its
-rate counters are charged only for packets that pass every other forwarding
-control and will actually be retransmitted.
-
-## Delegate filter management
-
-ACL permission `5` is the filter-manager role:
-
-```text
-setperm <companion-public-key-hex> 5
-```
-
-A filter manager can read non-secret operational status and manage `repeat`,
-`loop.detect`, `flood.max*`, `flood.channel.data*`, `flood.channel.block*`,
-`flood.filter*`, and `flood.moderation*`. Delegated `get` access uses an
-explicit allowlist: it cannot retrieve guest, WiFi, MQTT, bridge, or other
-credentials, and it cannot change regions, ACL entries, radio settings, or
-unrelated administrator settings.
-
-## Security limitations
-
-Public and hashtag channels use shared, well-known keys. A valid channel MAC
-proves that the sender knew the channel key; it does not identify a person.
-The `<sender>` value is an unverified display name and can be spoofed. Path
-hashes are truncated routing hints and can collide or be manipulated; they are
-not authenticated user identities.
-
-Use username and path rules as traffic moderation, not as an authorization
-boundary. For a strict network boundary, combine these tools with region ACLs,
-private transport/channel keys, and controlled device access.
-
-## Remove the custom rules
-
-To return the two new tables to their default empty state:
-
-```text
-del flood.filter all
-del flood.moderation all
-get flood.filter
-get flood.moderation
-```
-
-This does not change the older `flood.max*`, channel-block, loop-detection, or
-region settings; inspect or reset those separately when troubleshooting.
@@ -1,143 +0,0 @@
-# GPS Tracking
-
-This document describes how GPS telemetry works for companion/client nodes and
-sensor nodes.
-
-## Scope
-
-GPS tracking uses the existing CayenneLPP GPS telemetry field. It does not add a
-new phone app protocol field.
-
-The GPS telemetry value contains latitude, longitude, and altitude. Speed,
-heading, and freshness are not sent as separate telemetry fields.
-
-If the firmware does not have a valid fresh GPS cache, it omits the GPS field
-from telemetry. This is intentional: stale or missing fixes are not reported as
-zero coordinates.
-
-## Freshness
-
-GPS telemetry is cached separately from advert location.
-
-The cache behavior is:
-
- Refresh the cached GPS value every 2 hours only when at least one contact or
-  ACL client can receive location telemetry.
- Try for up to 15 minutes during a refresh.
- If the position stays within about 100 meters for 30 seconds, cache a weighted
-  average of the stable fixes, with newer fixes weighted more heavily.
- If the position moves outside that 100 meter circle during acquisition, cache
-  the latest valid fix.
- Omit GPS from telemetry if there is no fix or if the cached fix is more than
-  12 hours old.
-
-When a telemetry request asks for location, GPS is kept on for 2 hours after the
-latest location request. During that hold window, later location telemetry
-requests can use fresh GPS data as soon as valid fixes are available.
-
-If GPS is manually enabled, it stays on and valid fixes continue to update the
-cache.
-
-If no contact or ACL client can receive location telemetry, the scheduled
-2-hour refresh does not run. A real location telemetry request still turns GPS
-on for the 2-hour hold window, and manual GPS-on still keeps the cache updated.
-
-## Companion/Client Nodes
-
-Companion/client telemetry uses the existing companion telemetry permission
-system:
-
- base telemetry
- location telemetry
- environment telemetry
-
-Location telemetry is sent only when the requester's effective telemetry
-permissions include location. Those permissions are derived from the companion
-telemetry mode settings and contact flags.
-
-The scheduled GPS cache refresh runs only when at least one stored contact has
-effective location telemetry access:
-
- `location: allow all` with at least one stored contact
- `location: allow flags` with at least one stored contact whose flags include
-  location
-
-No new phone app behavior is required. Existing clients see the existing GPS
-telemetry field when it is present.
-
-## Sensor Nodes
-
-Sensor telemetry access is controlled by:
-
-```text
-get telemetry.access
-set telemetry.access all
-set telemetry.access acl
-```
-
-`all` is the default and matches the previous sensor telemetry behavior. A
-request that reaches the normal sensor telemetry request path can receive the
-requested telemetry fields, including GPS, subject to the request mask and GPS
-freshness rules.
-
-`acl` gates telemetry through the sensor ACL. A requester with read-only or
-higher permissions receives the existing telemetry set, including GPS. Guest or
-unknown requesters receive no telemetry fields.
-
-The scheduled GPS cache refresh follows the same access setting:
-
- `all`: runs only when at least one ACL client exists
- `acl`: runs only when at least one ACL client is read-only or higher
-
-Use the existing ACL command to grant access:
-
-```text
-setperm <pubkey> 1
-```
-
-Permission values:
-
- `1`: read-only, suitable for telemetry access
- `2`: read-write
- `3`: admin
-
-## Advert Location
-
-Advert location is separate from telemetry GPS. The advert policy is controlled
-with:
-
-```text
-gps advert
-gps advert none
-gps advert share
-gps advert prefs
-```
-
-Policies:
-
- `none`: do not include location in adverts
- `share`: use the live/shared sensor manager location
- `prefs`: use the stored node latitude and longitude preferences
-
-Telemetry GPS can be fresh while advert location is fixed or disabled, depending
-on this policy.
-
-## Recommended Setup
-
-For private sensor tracking:
-
-```text
-set telemetry.access acl
-setperm <owner_pubkey> 3
-setperm <trusted_pubkey> 1
-```
-
-For compatibility with the older sensor behavior:
-
-```text
-set telemetry.access all
-```
-
-For GPS telemetry behavior, leave the phone app unchanged. The firmware omits
-GPS when it is stale or missing and sends the existing GPS telemetry field when
-fresh data is available.
@@ -1,427 +0,0 @@
-# Halo and Keymind Branch Settings
-
-This file covers only CLI settings and helper commands added by the Halo or
-Keymind branches. Use `docs/cli_commands.md` for the general MeshCore CLI.
-See [Repeater Flood Filtering and Moderation](flood_filtering.md) for a focused
-filter setup and troubleshooting guide.
-
-## Quick Start
-
-```text
-set retry.preset rooftop
-set direct.retry.heard on
-set flood.retry.advert off
-set flood.retry.bridge off
-set flood.retry.prefixes none
-set flood.retry.ignore none
-```
-
-Then verify:
-
-```text
-get retry.preset
-get direct.retry.heard
-get flood.retry.advert
-get flood.retry.prefixes
-get flood.retry.ignore
-```
-
-Use prefixes from the analyzer or neighbors list or `get recent.repeater` after the repeater has been online for a few hours.
-
-## Common Examples
-
-Disable retrying advert packets:
-
-```text
-set flood.retry.advert off
-get flood.retry.advert
-```
-
-Ignore a repeater as a successful flood retry echo:
-Use this if you have a car repeater and a house repeater; have the house ignore the car.
-
-```text
-set flood.retry.ignore 71CE82,C7618C
-get flood.retry.ignore
-```
-
-Only accept specific downstream relays as flood retry success:
-You're in a hole and need to hit a mountain top repeater to get out; keep trying till one you see one of these send out your packet.
-
-```text
-set flood.retry.prefixes A58296,860CCA,425E5C
-get flood.retry.prefixes
-```
-
-Bridge two groups of repeaters:
-
-```text
-set flood.retry.bridge on
-set flood.retry.bucket 1 71CE82,C7618C
-set flood.retry.bucket 2 BEEBB0,425E5C
-get flood.retry.bucket.1
-get flood.retry.bucket.2
-```
-
-Return to simple non-bridge flood retry:
-
-```text
-set flood.retry.bridge off
-set flood.retry.prefixes none
-set flood.retry.ignore none
-```
-
-## Added Settings
-
-| Setting | What it does | How to use | Example |
-| --- | --- | --- | --- |
-| `battery.alert` | Sends opt-in, region-scoped low-battery warnings to `#repeaters` after 30 minutes of uptime. | `get battery.alert`, `get battery.alert.region`, `set battery.alert on [region]`, `set battery.alert off` | `set battery.alert on sea` |
-| `battery.alert.low` | Warning threshold percentage. Must be greater than `battery.alert.critical`. | `get battery.alert.low`, `set battery.alert.low <1-100>` | `set battery.alert.low 20` |
-| `battery.alert.critical` | Critical threshold percentage. Critical and warning alerts use the same 12-hour resend cooldown. | `get battery.alert.critical`, `set battery.alert.critical <0-99>` | `set battery.alert.critical 10` |
-| `recent.repeater` | Shows, seeds, or clears the recent repeater prefix/SNR table used by direct retry and bridge freshness checks. Entries older than 24 hours are removed by a three-hour sweep. | `get recent.repeater`, `get recent.repeater <page>`, `set recent.repeater <prefix> <snr_db>`, `clear recent.repeater` | `set recent.repeater A1B2C3 -8.5` |
-| `flood.channel.data` | Turns forwarding of flood `GRP_DATA` channel packets on or off. With the default `on`, `GRP_DATA` repeats normally even when `flood.channel.block.hops` is set. | `get flood.channel.data`, `set flood.channel.data on/off` | `set flood.channel.data off` |
-| `flood.channel.data.hops` | Separate hop gate used only when `flood.channel.data` is `off`; `all` blocks `GRP_DATA` at any hop count, `1`-`7` repeats at that hop count or lower and blocks longer paths. | `get flood.channel.data.hops`, `set flood.channel.data.hops <all|1-7>` | `set flood.channel.data.hops 7` |
-| `flood.channel.block` | Blocks selected flood `GRP_TXT`/`GRP_DATA` channels when the key validates the packet. New repeater block lists start with editable/deletable `#wardriving h=4`. Add `h=<all|1-7|default>` for a per-channel hop override. | `get flood.channel.block`, `set flood.channel.block[.n] <key|#channel> [name] [h=...]`, `del flood.channel.block[.n]` | `set flood.channel.block #wardriving h=4` |
-| `flood.channel.block.hops` | Limits keyed channel-block matches to short flood paths. `all` blocks matching packets at any hop count; `1`-`7` repeats packets at that hop count or lower and blocks longer matches. This does not restrict unkeyed `GRP_DATA`; use `flood.channel.data.hops` for that. | `get flood.channel.block.hops`, `set flood.channel.block.hops <all|1-7>` | `set flood.channel.block.hops 3` |
-| `flood.filter` | Persistent repeater-only forwarding rules for flood routes `0x00`/`0x01`, selected by payload type and received hop count/range. Direct routing and local receive/logging are unchanged. | `get flood.filter[.n]`, `set flood.filter[.n] <type> <N|N+|N-M|all>`, `del flood.filter.<n>|all` | `set flood.filter grp_data 4+` |
-| `flood.moderation` | Decrypts keyed `GRP_TXT` channels and applies drop, per-username messages/minute, and maximum-hop controls, optionally matched against the first 1-3 path hashes. Supports `public`, `#channel`, and 128/256-bit channel keys. Sender names and truncated path hashes are moderation hints, not authenticated identities. | `get flood.moderation[.n]`, `set flood.moderation[.n] <channel> <sender> <drop|rate=X/min|hops=N> [path=...]`, `del flood.moderation.<n>|all` | `set flood.moderation public "Noisy User" rate=5/min hops=4` |
-| `clock.sync.mesh` | After 30 minutes of uptime, estimates UTC from a configurable consensus of fresh signed-advert or valid Public-channel sources. Only timestamps from firmware build time through build time plus ten years are recorded. Successful CLI, GPS, or WiFi/NTP clock updates suppress LoRa time collection until reboot; after reboot LoRa is the fallback if NTP cannot sync. | `get clock.sync.mesh`, `set clock.sync.mesh <on|off>`, `get clock.sync.status` | `set clock.sync.mesh on` |
-| `clock.sync.internet` | Adds a read-only internet/NTP estimate at the same delayed check on WiFi MQTT repeater-observer builds. Other builds retain the setting but report internet unavailable. | `get clock.sync.internet`, `set clock.sync.internet <on|off>` | `set clock.sync.internet on` |
-| `clock.sync.drift` | Absolute correction threshold in seconds. The clock is moved forward or backward only when the estimate differs by more than this value. | `get clock.sync.drift`, `set clock.sync.drift <30-86400>` | `set clock.sync.drift 3600` |
-| `clock.sync.samples` | Minimum number of distinct, in-window receive paths that must agree before mesh time can be used. A strict majority of all fresh samples is also required. Range `3-16`; default `9`. | `get clock.sync.samples`, `set clock.sync.samples <3-16>` | `set clock.sync.samples 9` |
-| `outpath` | Overrides the primary direct route used for replies to the current remote client. | `get outpath`, `set outpath <hops>`, `set outpath direct`, `set outpath clear`, `set outpath flood` | `set outpath A1B2C3,D4E5F6` |
-| `altpath` | Adds a secondary direct route for repeater replies to the current remote client. | `get altpath`, `set altpath <hops>`, `set altpath direct`, `set altpath clear`, `set altpath flood` | `set altpath 71CE82,BA09F0` |
-
-## Other Keymind Commands
-
-| Command | What it does | How to use | Example |
-| --- | --- | --- | --- |
-| `send text.flood` | Sends a `#repeaters` flood text message formatted as `<node_name>: <message>`, with `:` in the node name sent as `;`. | `send text.flood <message>` | `send text.flood checking ridge link` |
-
-## Battery Alerts
-
-Battery alerts are off by default. Enabling requires a named region. With no
-region argument, the repeater selects the single deepest (most narrow) region
-in the hierarchy; if multiple regions tie, the command asks for an explicit
-region. For example, after `region def west pnw wa w-wa sea`, `set
-battery.alert on` selects `sea`, while `set battery.alert on w-wa` overrides
-the default. Alerts are never sent as unscoped floods, and removing the selected
-region stops alerts until a valid scope is selected again.
-
-The repeater suppresses alerts for its first 30 minutes of uptime. It then
-checks every 30 minutes and sends a flood text warning to `#repeaters` when
-voltage is above `1 V` and the estimated battery percent is below
-`battery.alert.low`.
-
-Warnings and critical alerts both use a `12`-hour resend cooldown, beginning
-only after the radio reports that the alert transmission completed.
-
-Defaults:
-
-| Setting | Default |
-| --- | ---: |
-| `battery.alert` | `off` |
-| `battery.alert.region` | `<unset>` |
-| `battery.alert.low` | `20` |
-| `battery.alert.critical` | `10` |
-
-Example:
-
-```text
-set battery.alert.low 20
-set battery.alert.critical 10
-set battery.alert on
-get battery.alert
-get battery.alert.region
-```
-
-CPU power saving remains compatible with the check. The battery timer never
-requests a wake earlier than its 30-minute deadline; when the normal loop is
-already awake after that deadline, no additional wake is needed. Sleeping time
-counts toward the startup delay, and an outbound warning prevents another sleep
-until the queued packet has been handled. This is separate from RX duty-cycle
-power saving, which only cycles the LoRa receiver and does not stop the main
-loop's battery timer.
-
-## Recent Repeater Table
-
-Direct retry uses the recent repeater table when `direct.retry.heard` is `on`.
-Bridge buckets also use this table: a configured bucket prefix is active only
-when it was heard within the last hour.
-
-Show learned rows:
-
-```text
-get recent.repeater
-get recent.repeater 2
-get recent.repeaters 2
-get recent.repeater page 3
-```
-
-Seed or correct a prefix:
-
-```text
-set recent.repeater A1B2C3 8.5
-```
-
-Clear learned and manually seeded rows:
-
-```text
-clear recent.repeater
-```
-
-Rows are sorted by prefix width, then SNR. A full direct retry failure lowers
-the matching row by `0.25 dB`.
-
-Serial CLI pages contain up to `128` rows. Remote LoRa CLI pages contain up to
-`7` rows.
-
-## Direct Path Overrides
-
-`outpath` and `altpath` apply to the current remote client ACL entry. They need
-remote client context, so they are not useful from the local serial CLI.
-
-Set paths with comma-separated hop hashes. Each hop must be `2`, `4`, or `6`
-hex characters, and all hops in one path must use the same width.
-
-```text
-get outpath
-set outpath A1B2C3,D4E5F6
-set outpath direct
-set outpath clear
-set outpath flood
-get altpath
-set altpath 71CE82,BA09F0
-set altpath clear
-```
-
-`set outpath direct` sets a zero-hop direct route for a client reachable without
-repeaters. `set outpath clear` forgets the override and lets normal path
-discovery fill it again. `set outpath flood` forces replies to use flood packets
-until the client logs in again.
-
-When `outpath` is a valid direct path and `altpath` is also a valid, different
-direct path, repeater DM replies send two packets: one on `outpath` and one on
-`altpath`. The secondary `altpath` copy does not create its own direct-retry
-state, so retry tracking stays attached to the primary `outpath` packet.
-`altpath clear` disables the secondary direct reply. `altpath flood` is accepted
-for command symmetry, but it does not create a second flood reply; only a valid
-direct `altpath` sends the second packet.
-
-## Direct Retry Settings
-
-Direct retry applies to direct-routed packets. A queued resend is canceled when the next-hop echo is heard. Repeaters expose the settings below; non-repeater firmware uses the same packet-type timing rules with fixed shared base/step timing.
-
-| Setting | What it does | How to use | Example |
-| --- | --- | --- | --- |
-| `retry.preset` | Applies shared direct and flood retry defaults. Values: `infra`, `rooftop`, `mobile` or `0`, `1`, `2`. | `get retry.preset`, `set retry.preset <value>` | `set retry.preset rooftop` |
-| `direct.retry.heard` | Uses the recent repeater table as the direct retry eligibility gate. | `get direct.retry.heard`, `set direct.retry.heard on/off` | `set direct.retry.heard on` |
-| `direct.retry.margin` | SNR margin in dB above the SF-specific receive floor. | `get direct.retry.margin`, `set direct.retry.margin <0-40>` | `set direct.retry.margin 5` |
-| `direct.retry.count` | Maximum direct retry attempts after initial TX. Direct-routed type 2 text packets always use 21 attempts regardless of this setting or the short-path cap. | `get direct.retry.count`, `set direct.retry.count <1-15>` | `set direct.retry.count 15` |
-| `direct.retry.base` | Base wait in milliseconds before retry; packet-length add-on is 3x for TRACE and ANON_REQ/type 7, 7x for TXT_MSG/type 2, and 6x for other direct retry packets. | `get direct.retry.base`, `set direct.retry.base <10-5000>` | `set direct.retry.base 175` |
-| `direct.retry.step` | Milliseconds added per retry attempt after the base, packet-length add-on, and random forwarding jitter. | `get direct.retry.step`, `set direct.retry.step <0-5000>` | `set direct.retry.step 100` |
-| `direct.retry.cr` | Adaptive coding-rate thresholds for repeater direct retry packets. Repeaters use `CR4`, `CR5`, `CR7`, or `CR8`, then escalate by attempt: CR4, CR5, CR7, CR7, then CR8 from a CR4 start; CR5, CR7, CR7, then CR8 from a CR5 start. Non-repeaters start at the current radio CR and follow the same escalation pattern, clamped at CR8. | `get direct.retry.cr`, `set direct.retry.cr <cr4_min>,<cr5_min>,<cr7_min>,<cr8_max>`, `set direct.retry.cr off` | `set direct.retry.cr 10.0,7.5,2.5,0` |
-
-The default adaptive coding-rate profile is `10.0,7.5,2.5,2.5`.
-SNR `10.0 dB` and up uses `CR4`, `7.5 dB` and up uses `CR5`,
-`2.5 dB` and down uses `CR8`, and the middle band uses `CR7`. If no
-recent repeater table entry is available, retry packets use `CR5`. Use
-`set direct.retry.cr off` to disable adaptive coding-rate overrides. Repeater
-attempts escalate from the adaptive starting CR: `CR4`, `CR5`, `CR7`, `CR7`,
-then `CR8` from a `CR4` start; `CR5`, `CR7`, `CR7`, then `CR8` from a `CR5`
-start. Non-repeaters use the current radio CR as the first retry CR and follow
-the same pattern up to `CR8`.
-
-Preset details:
-
-| Preset | Base | Count | Step | SNR gate |
-| --- | ---: | ---: | ---: | --- |
-| `infra` | `275 ms` | `4` | `150 ms` | SF floor + `15 dB` |
-| `rooftop` | `175 ms` | `15` | `100 ms` | SF floor + `5 dB` |
-| `mobile` | `175 ms` | `15` | `50 ms` | SF floor |
-
-Example for a quiet fixed repeater:
-
-```text
-set retry.preset rooftop
-set direct.retry.heard on
-set direct.retry.margin 5
-```
-
-Example for a moving or weak-link node:
-
-```text
-set retry.preset mobile
-set direct.retry.margin 0
-```
-
-## Flood And Advert Settings
-
-Flood retry applies to flood-routed packets. A queued retry is canceled when the
-same packet is heard from a qualifying, non-ignored repeater. Bridge mode uses
-the bucket rules below instead.
-
-| Setting | What it does | How to use | Example |
-| --- | --- | --- | --- |
-| `flood.retry.count` | Base flood retry attempts after initial TX. Path count 0 doubles it, path count 1 uses 1.5x rounded up, path count 2+ uses the base, and actual attempts cap at `15`; `0` disables flood retry. | `get flood.retry.count`, `set flood.retry.count <0-15>` | `set flood.retry.count 7` |
-| `flood.retry.path` | Maximum path hash count eligible for flood retry, or `off` to disable the gate. | `get flood.retry.path`, `set flood.retry.path <0-63/off>` | `set flood.retry.path 1` |
-| `flood.retry.group.path` | Additional path gate for group data (`type=6`) flood retries. The stricter of this and `flood.retry.path` applies; `off` disables only this additional gate. Setting the general path gate to `0` forces this setting to `off`; a named preset restores the default of `1`. | `get flood.retry.group.path`, `set flood.retry.group.path <0-63/off>` | `set flood.retry.group.path 1` |
-| `flood.retry.advert` | Allows or blocks retry for node advert packets (`type=4`). Default is `off`. | `get flood.retry.advert`, `set flood.retry.advert on/off` | `set flood.retry.advert off` |
-| `flood.retry.prefixes` | Target prefixes. If set, only same-packet echoes from matching last-hop prefixes cancel a retry. | `get flood.retry.prefixes`, `set flood.retry.prefixes <prefixes/none/off>` | `set flood.retry.prefixes BEEBB0,425E5C` |
-| `flood.retry.ignore` | Ignored prefixes. In non-bridge retry, ignored last-hop echoes do not cancel retry. | `get flood.retry.ignore`, `set flood.retry.ignore <prefixes/none/off>` | `set flood.retry.ignore 71CE82,C7618C` |
-| `flood.retry.bridge` | Enables bucket-based bridge retry logic. | `get flood.retry.bridge`, `set flood.retry.bridge on/off` | `set flood.retry.bridge on` |
-| `flood.retry.bucket.<n>` | Shows one bridge bucket. Buckets are numbered `1`-`6`. | `get flood.retry.bucket.<n>` | `get flood.retry.bucket.1` |
-| `flood.retry.bucket` | Sets bridge bucket prefixes. | `set flood.retry.bucket <1-6> <prefixes/none/off>` | `set flood.retry.bucket 1 71CE82,C7618C` |
-
-The shared retry preset sets these flood defaults:
-
-| Preset | Retry count | Path gate | Group-data path gate |
-| --- | ---: | ---: | ---: |
-| `infra` | `1` | `1` | `1` |
-| `rooftop` | `3` | `2` | `1` |
-| `mobile` | `15` | `1` | `1` |
-
-Example for path-gated retry:
-
-```text
-set retry.preset rooftop
-set flood.retry.path 1
-set flood.retry.group.path 1
-set flood.retry.advert off
-set flood.retry.ignore 71CE82,C7618C
-```
-
-## North South Buckets
-
-Buckets describe groups of repeaters on different sides of this relay. Bucket
-numbers do not have built-in meanings; this example uses bucket `1` for North
-and bucket `2` for South.
-
-```text
-              North bucket 1
-        +-----------------------+
-        | A1B2C3       D4E5F6   |
-        | North A      North B  |
-        +-----------+-----------+
-                    |
-                    v
-              +-----------+
-              | This node |
-              +-----------+
-                    ^
-                    |
-        +-----------+-----------+
-        | 71CE82       C7618C   |
-        | South A      South B  |
-        +-----------------------+
-              South bucket 2
-```
-
-Configure the buckets:
-
-```text
-set flood.retry.bridge on
-set flood.retry.bucket 1 A1B2C3,D4E5F6
-set flood.retry.bucket 2 71CE82,C7618C
-set flood.retry.ignore none
-```
-
-Packet heard from the North:
-
-```text
-     heard source
-         |
-         v
-  +--------------+        retry targets
-  | North bucket | -----> South bucket
-  | bucket 1     | -----> Other fresh/unbucketed relays
-  +--------------+
-```
-
-Packet heard from the South:
-
-```text
-     heard source
-         |
-         v
-  +--------------+        retry targets
-  | South bucket | -----> North bucket
-  | bucket 2     | -----> Other fresh/unbucketed relays
-  +--------------+
-```
-
-Packet heard from an unbucketed or pathless source:
-
-```text
-     heard source
-         |
-         v
-  +--------------+        retry targets
-  | Other bucket | -----> North bucket
-  | implicit     | -----> South bucket
-  +--------------+
-```
-
-Bridge retry stays eligible until every target bucket has been heard or
-`flood.retry.count` is exhausted. A configured bucket is a target only when at
-least one of its prefixes is fresh in `recent.repeater`. Prefixes in
-`flood.retry.ignore` never count as bucket hits.
-
-Configuration reports a warning when prefixes in different buckets, including
-bucket 7 (`flood.retry.prefixes`), share the same first byte. A 1-byte path cannot
-distinguish those buckets. Bridge mode therefore excludes every matching bucket
-when that short prefix is the source, and credits every matching target bucket
-when it is heard as an echo. This prevents an ambiguous short prefix from keeping
-an impossible target outstanding through every retry.
-
-Each flood retry wait retains the fixed maximum-frame plus 20 packet-airtime
-delay, then adds random jitter from zero to 200 percent of one additional packet
-airtime. This keeps nearby repeaters from repeating a collision on fixed timing
-while capping the added wait at two frames.
-
-Only one enhanced retry sequence can be active for the same logical flood
-packet. Identical floods still receive their normal transmission, but do not
-multiply the extra attempts. Evicted queued retries release their bridge state,
-and the final echo wait does not reserve a packet-pool entry.
-
-Earlier path hops from a successful bridge echo refresh a separate per-bucket
-reachability cache without an SNR value. Only the final hop, which actually sent
-the received RF frame, updates `recent.repeater` and its SNR. Indirect path hops
-therefore cannot change direct-retry SNR gating or coding-rate selection.
-
-## Troubleshooting
-
-If advert packets are still retrying:
-
-```text
-get flood.retry.advert
-set flood.retry.advert off
-```
-
-If ignored prefixes still appear in `flood retry good` logs:
-
-```text
-get flood.retry.ignore
-set flood.retry.ignore <prefix>
-```
-
-The ignored prefix must match the last hop shown as `heard=<prefix>`. For example, this log needs `C7618C` in the ignore list:
-
-```text
-flood retry good (... path=7773D0>C7618C, heard=C7618C ...)
-```
-
-If retries are too aggressive:
-
-```text
-set flood.retry.count 1
-set flood.retry.path 1
-set direct.retry.count 4
-```
-
-If retries are too sparse:
-
-```text
-set flood.retry.count 7
-set flood.retry.path 2
-```
@@ -6,8 +6,6 @@ Below are a few quick start guides.

 - [Frequently Asked Questions](./faq.md)
 - [CLI Commands](./cli_commands.md)
- [Easy Full-Firmware Update over LoRa](./ota_easy.md)
- [GPS Tracking](./gps_tracking.md)
 - [Companion Protocol](./companion_protocol.md)
 - [Packet Format](./packet_format.md)
 - [QR Codes](./qr_codes.md)
@@ -41,7 +41,7 @@ Maximum unescaped frame size: 512 bytes.

 | Command     | Value  | Data               | Description                                                 |
 |-------------|--------|--------------------|-------------------------------------------------------------|
-| Data        | `0x00` | Raw packet         | Queue packet for transmission                               |
+| Data        | `0x00` | Raw packet         | Queue packet for transmission (one pending at a time)       |
 | TXDELAY     | `0x01` | Delay (1 byte)     | Transmitter keyup delay in 10ms units (default: 50 = 500ms) |
 | Persistence | `0x02` | P (1 byte)         | CSMA persistence parameter 0-255 (default: 63)              |
 | SlotTime    | `0x03` | Interval (1 byte)  | CSMA slot interval in 10ms units (default: 10 = 100ms)      |
@@ -58,6 +58,12 @@ Maximum unescaped frame size: 512 bytes.

 Data frames carry raw packet data only, with no metadata prepended. The Data command payload is limited to 255 bytes to match the MeshCore maximum transmission unit (MAX_TRANS_UNIT); frames larger than 255 bytes are silently dropped. The KISS specification recommends at least 1024 bytes for general-purpose TNCs; this modem is intended for MeshCore packets only, whose protocol MTU is 255 bytes.

+Only one packet may be pending for radio transmission at a time. If the host sends a second Data frame before the first has completed, the modem responds with Error (0xF1) and TxBusy (0x07).
+
+### Host Output Backpressure
+
+Outbound frames are encoded into a 2-slot queue and flushed when serial output space is available; `loop()` never blocks on writes. Radio TX state advances independently of host read speed. TxDone is retained until it can be queued. If the outbound queue is full, the modem responds with Error (0xF1) and TxBusy (0x07). Hosts should read serial promptly to avoid delayed responses.
+
 ### CSMA Behavior

 The TNC implements p-persistent CSMA for half-duplex operation:
@@ -156,15 +162,15 @@ Response codes use the high-bit convention: `response = command | 0x80`. Generic
 | MacFailed     | `0x04` | MAC verification failed |
 | UnknownCmd    | `0x05` | Unknown sub-command     |
 | EncryptFailed | `0x06` | Encryption failed       |
-| TxBusy        | `0x07` | Transmit busy           |
+| TxBusy        | `0x07` | Radio TX busy, or host output queue full |

 ### Unsolicited Events

 The TNC sends these SetHardware frames without a preceding request:

-**TxDone (0xF8)**: Sent after a packet has been transmitted. Contains a single byte: 0x01 for success, 0x00 for failure.
+**TxDone (0xF8)**: Sent after radio transmission completes. Contains a single byte: 0x01 for success, 0x00 for failure. Delivery to the host may be delayed under serial backpressure but is not dropped.

-**RxMeta (0xF9)**: Sent immediately after each standard data frame (type 0x00) with metadata for the received packet. Contains SNR (1 byte, signed, value x4 for 0.25 dB precision) followed by RSSI (1 byte, signed, dBm). Enabled by default; can be toggled with SetSignalReport. Standard KISS clients ignore this frame.
+**RxMeta (0xF9)**: Sent after each standard data frame (type 0x00) with SNR (1 byte, signed, value x4) and RSSI (1 byte, signed, dBm). Queued with the data frame; omitted if the data frame cannot be queued. Enabled by default; toggle with SetSignalReport. Standard KISS clients ignore this frame.

 ## Data Formats

@@ -18,6 +18,7 @@ Once you have a working app/project, you need to be able to demonstrate it exist
 | 0100            | MeshCore Open               | zsylvester@monitormx.com — https://github.com/zjs81/meshcore-open |
 | 0110 - 011F     | Ripple                      | ripple_biz@protonmail.com — https://buymeacoffee.com/ripplebiz    |
 | 0120            | MCO Advanced                | most.original.address@gmail.com — https://hdden.ru/MCOa/          |
+| 0130 - 013F     | StreamSensor                | william@housedillon.com - https://housedillon.com/blog/lora-e5-with-seeed-fusion |
 | FF00 - FFFF     | -reserved for testing/dev-  |                                                                   |

 (add rows, inside the range 0100 - FEFF for custom apps)
@@ -1,154 +0,0 @@
-# Easy full-firmware update over LoRa (ESP32)
-
-This guide shows the shortest manual path for sending a **full firmware image** from a computer to a
-MeshCore node over LoRa. It uses this temporary OTA channel:
-
-| Setting | Value |
-| --- | --- |
-| Center frequency | 909.950 MHz |
-| Bandwidth | 125 kHz |
-| Spreading factor | SF5 |
-| Coding rate used in this guide | CR5 |
-| Example window | 120 minutes |
-
-The copy/paste command is:
-
-```text
-tempradio 909.950,125,5,5,120
-```
-
-The fourth value is the transmit coding rate. This guide uses CR5, but the participating nodes' coding rates
-do not need to match.
-
-`tempradio` is not saved and the node returns to its normal radio settings when the window ends or the node
-reboots. This frequency is intended for North American configurations. Confirm that it is permitted in your
-location and change it when necessary.
-
-## Before you start
-
-You need:
-
- A standard, non-logging Keymind OTA build on the source and destination nodes. Logging and MQTT builds do
-  not include LoRa OTA. Use the WiFi or USB connection to update those.
- An OTA-capable ESP32 destination with an A/B partition table. nRF52 has a single application slot and
-  cannot install this guide's full-image container; it requires an in-place delta plus the exact matching
-  OTAFIX bootloader. On RAK4631 repeaters, the OTA target is named
-  `RAK_4631_repeater_no_external_sensors_lora_ota`; it retains built-in battery monitoring but omits optional
-  external environmental/GPS sensor packages to fit the safe in-place update limit.
- The new, non-merged `.bin` application firmware for the destination's exact board **and role**. Do not
-  package an ESP32 `-merged.bin` factory image.
- A source node connected to the computer by USB serial.
- Overlapping `tempradio` windows on the source, destination, and every repeater needed between them.
-
-LoRa OTA packets are generated, received, and relayed only while `tempradio` is active. If any required
-window closes, the transfer stops making progress and can resume during a later overlapping window.
-
-## 1. Install `motatool`
-
-Install Rust if necessary, then install the standalone packaging and serving tool:
-
-```bash
-git clone https://github.com/vk496/motatool
-cargo install --path ./motatool
-```
-
-## 2. Package the full firmware
-
-Put the application firmware in a working directory, then build a full `.mota` container. For example:
-
-```bash
-mkdir -p ./motas
-motatool build --fw ./Heltec_v3_repeater-v1.16.05.bin --out-dir ./motas
-motatool verify ./motas/*.mota
-```
-
-Replace the example filename with the firmware for the destination's exact target. With no `--base`
-argument, `motatool build` creates a full-image update. The firmware must contain its MeshCore `EndF`
-identity trailer so `motatool` and the destination can verify the target, hardware, and version.
-
-Do not continue if `motatool verify` reports a failure.
-
-## 3. Start the temporary OTA channel
-
-On the source node, destination node, and every intermediate repeater, run:
-
-```text
-tempradio 909.950,125,5,5,120
-```
-
-All participating nodes must use the same frequency, bandwidth, and spreading factor. Their time windows must
-overlap. Start with the farthest hop (the destination) and work back toward the source when using `tempradio`.
-
-If you administer the destination over LoRa, the controller used to send later `ota` commands must also be
-able to communicate on this temporary channel. For unattended nodes, use synchronized `tempradioat` entries
-instead of manually starting the windows. Ensure the nodes' clocks are set before using `tempradioat`.
-
-## 4. Serve the update from the computer
-
-Close any serial terminal using the source node's USB port, find its device name, and start the server:
-
-```bash
-motatool serve --dir ./motas --serial /dev/ttyACM0 -v
-```
-
-Replace `/dev/ttyACM0` with the source node's serial device. `motatool` attaches the folder to the source
-node, and the source advertises the full update over LoRa while its temporary-radio window is active.
-
-Leave this command running until the destination finishes downloading.
-
-## 5. Find and download the update
-
-On the destination node, check its state and ask for nearby updates:
-
-```text
-ota status
-ota ls
-```
-
-Discovery is asynchronous. Wait a few seconds and run `ota ls` again if the list is initially empty. Find
-the entry marked `[yours]` and `full`, then use its displayed number. If it is entry 1, run:
-
-```text
-ota pull 1 flash
-```
-
-Monitor the transfer:
-
-```text
-ota status
-```
-
-The update is ready when the status says `ready to install`. OTA is deliberately the lowest-priority mesh
-traffic, so a busy channel can make a full-image transfer take longer than the example window. If necessary,
-start another overlapping `tempradio` window; the download resumes rather than starting over.
-
-## 6. Verify and install
-
-Once the destination reports `ready to install`, run:
-
-```text
-ota install
-```
-
-The destination verifies the complete firmware again before approving it. If verification succeeds, it
-reboots and applies the update. If verification fails, it keeps the current firmware and reports an error.
-
-After the node returns, reconnect on its normal radio channel and confirm:
-
-```text
-ota status
-```
-
-## Quick troubleshooting
-
- **Nothing appears in `ota ls`:** confirm that `motatool serve` is still running and every required node
-  has an active `tempradio 909.950,125,5,5,120` window.
- **The update is marked `[other hw]`:** it is for a different board or firmware role. Do not install it.
- **The download stalls:** check the source, destination, and intermediate repeaters. Restart matching,
-  overlapping temporary-radio windows if one expired.
- **The serial port is busy:** close the serial terminal before starting `motatool serve`.
- **The destination rejects the package:** verify that you used the non-merged application image with the
-  `EndF` trailer and that `motatool verify` succeeds.
-
-For additional commands and safety details, see [the full OTA user guide](ota_user_guide.md). For protocol
-and container internals, see [the OTA protocol specification](ota_protocol.md).
@@ -1,615 +0,0 @@
-# MeshCore OTA — `.mota` container & LoRa protocol
-
-This is the **single source of truth** for MeshCore's over-the-air firmware update system ("mOTA"). It is
-written for developers who want to implement an interoperable peer (server, fetcher, relay, or host tool)
-in another codebase or project. Everything below is implemented and hardware-verified in this repository;
-where a section names a source file, that file is the authoritative reference for byte-level details.
-
-> **Just want to update your node?** See the plain-language [OTA user guide](ota_user_guide.md) — this
-> document is the technical/wire specification.
-
-**Design goals**
-
- Distribute firmware over LoRa as a **self-verifying, resumable, single-source block transfer** that
-  survives reboots and never auto-applies without explicit consent.
- **Trustless mesh relay:** repeaters may forward packets while the source alone serves firmware data;
-  integrity is content-addressed
-  against a signed merkle root, so a relay need not be trusted and never needs the signing keys.
- **Lowest priority, always:** OTA traffic is enqueued behind all mesh traffic — "eventually upgradable".
-  A busy node delays OTA indefinitely rather than competing with real traffic.
- **Portable:** the engine (`src/helpers/ota/OtaManager`) is Arduino/radio/crypto-free and host-testable,
-  so the same logic drives a device, a simulation, or a third-party implementation.
-
-**Source map** (all under `src/helpers/ota/` unless noted)
-
-| Concern | File |
-|---|---|
-| Constants, enums, flags | `OtaFormat.h` |
-| Container/manifest parse | `MotaContainer.{h,cpp}` |
-| Merkle tree + proofs | `MerkleTree.{h,cpp}` |
-| EndF self-identity | `FirmwareInfo.{h,cpp}` |
-| Wire message codec | `OtaProtocol.{h,cpp}` |
-| Session engine (serve+fetch+discovery) | `OtaManager.{h,cpp}` |
-| Multi-mota / folder relay | `OtaSource.h`, `MotaSourceSerial.{h,cpp}`, `MotaSeederProto.h` |
-| Staging stores | `OtaStore.h`, `OtaStoreFlashNrf52.*`, `OtaStoreFlashEsp32.*` |
-| Apply | `OtaApply.*`, bootloader `Adafruit_nRF52_Bootloader_OTAFIX` |
-| Device glue (CLI/context) | `OtaCli.cpp`, `OtaContext.h` |
-| Host tooling | [`motatool`](https://github.com/vk496/motatool) (standalone Rust CLI: build/verify/inspect/serve); `tools/mota/` (Python reference lib `motalib.py` + build/test glue) |
-
---
-
-## 1. Conventions
-
- **Endianness:** all multi-byte integers are little-endian unless stated.
- **Hashes (multihash):** the hash family is declared once per manifest via `hash_algo` =
-  `0x12` = **SHA-256** (the [multihash](https://github.com/multiformats/multihash) code for sha2-256).
-  Truncations used:
-  - `sha2-256:4` — first 4 bytes of the SHA-256 digest. Merkle leaves, internal nodes, root, proofs,
-    `manifest_id`, and the discovery `set_digest`.
-  - `sha2-256:8` — first 8 bytes. Base-firmware identity (`base_hash`, `EndF.body_hash`).
-  - `sha2-256:32` — full digest. The image security anchor (`image_hash`).
-  Digests are stored **bare** (just the truncated bytes); the family is implied by `hash_algo`.
- **Signatures:** Ed25519 (RFC 8032), 64-byte detached signature, 32-byte public key.
-
-**Reference constants** (`OtaFormat.h`):
-
-| Name | Value | ASCII / note |
-|---|---|---|
-| Container `MAGIC` | `6D 4F 54 41` | `mOTA` |
-| Container `TRAILER` | `76 6B 34 39 36` | `vk496` |
-| `EndF` marker | `45 6E 64 46` | `EndF` |
-| `hash_algo` (sha2-256) | `0x12` | multihash code |
-| `format_ver` | `0x02` | this spec |
-| `approval` = not approved | `FF FF FF FF` | erased NOR word |
-| `approval` = approved | `41 50 52 56` | `APRV` |
-| `MFLAG_FULL` | `0x01` | flags bit0 |
-| `MFLAG_SIGNED` | `0x02` | flags bit1 |
-| `CODEC_FULL` / `_SEQUENTIAL` / `_INPLACE` | `0` / `1` / `2` | §5 |
-| `PAYLOAD_TYPE_OTA` | `0x0C` | MeshCore packet type (`src/Packet.h`) |
-| `MAX_PACKET_PAYLOAD` | `184` | usable bytes per packet (`src/MeshCore.h`) |
-| Default block size | `1024` | `block_size_log2 = 0x0A` |
-| OTA TX priority | `250` | lowest (`OTA_TX_PRIORITY`, `src/Mesh.h`) |
-
---
-
-## 2. Firmware image & the `EndF` trailer
-
-Every OTA-capable build appends a fixed **56-byte** `EndF` trailer to its flashed image so a running node
-can discover its own size **and self-describing identity** on any MCU (no linker symbols needed). Every
-field is always present at a constant offset. Implemented by `FirmwareInfo.cpp`; appended at build time by
-`tools/mota/pio_endf.py` (post-build hook).
-
-```
-flashed image = BODY (image bytes) || EndF trailer
-EndF trailer (fixed 56 bytes):
-  off 0   4   "EndF"        45 6E 64 46
-  off 4   4   body_len      uint32 LE — length of BODY (excludes the whole trailer)
-  off 8   8   body_hash     sha2-256:8 of BODY
-  off 16  4   fw_version    uint32 LE, packed MAJOR<<24|MINOR<<16|PATCH<<8|pre  (0 = unknown)
-  off 20  4   target_id     uint32 LE — sha2-256:4(pio_env): hardware + role + partition (fetch routing)
-  off 24  32  hw_id         NUL-padded ASCII hardware tag (brick-safety), e.g. "RAK4631" ("" = unknown)
-```
-
- **Self-describing identity.** `pio_endf.py` computes `target_id` from the PlatformIO env name itself (so
-  it's correct even without `build.sh`'s `-D MOTA_TARGET_ID`), `hw_id` from `MOTA_HW_ID`, and `fw_version`
-  from `FIRMWARE_VERSION`. The device reads them back (`ota_self_firmware()`), so a node's advertised
-  identity is correct regardless of how it was built — and the packaging tool reads them straight from a raw
-  `.bin` (no `--target-env`/`--fw-version` flags, no reliance on filenames; §9, §13). A dev build with no
-  dotted version simply carries `fw_version = 0` / empty `hw_id` (= unknown) — still a full 56-byte trailer.
- **Size discovery:** scan flash from the partition top downward for the `EndF` marker; the byte before it
-  is the last BODY byte (the trailer is always 56 bytes). See `ota_self_firmware()`.
- **Delta base matching:** a node's `body_hash` is read directly from its own `EndF`; a delta's `base_hash`
-  (§5) must equal it. `body_hash` is over BODY only.
- **No circularity:** `EndF` hashes only the BODY, never itself.
-
-The "reconstructed image" referenced by the manifest is the full `BODY || EndF` (what gets flashed).
-
-> **Implementer note:** the bootloader (and any non-Arduino consumer) MUST locate the body extent by
-> scanning for `EndF`, never by trusting a stored size — see the bootloader contract in §12.
-
---
-
-## 3. The `.mota` container
-
-The distributed form (host-built, wire-transferred). Parsed by `mota_parse()` in `MotaContainer.cpp`.
-
-```
-off            size   field
-0              4      MAGIC = 6D 4F 54 41
-4              4      MOTA_TOTAL_SIZE  uint32 LE — total container bytes (incl. manifest, leaves[],
-                                       payload, trailer). Lets a node pre-reserve staging and compute
-                                       write_start = staging_region_end − MOTA_TOTAL_SIZE.
-8              M      MANIFEST         (§4; M = 197 fixed + leaves[], 4*BC; no length field — BC from payload_size)
-8 + M          P      PAYLOAD          (payload_size bytes; delta or full image)
-8 + M + P      5      TRAILER = 76 6B 34 39 36
-```
-
-`MOTA_TOTAL_SIZE = 4 + 4 + M + P + 5`. The manifest `M` **includes** `leaves[]`; the manifest-minus-leaves
-prefix (`mfl`, sent over the wire as `OTA_MANIFEST`) is `[8, leaves_off)`.
-
-**Staged (in-flash) form.** Written bottom-aligned so `TRAILER` ends at `staging_region_end`. Identical
-bytes, except the device mutates two regions in place (both NOR-safe, no re-erase): the `leaves[]` slots
-(filled as blocks arrive — §7) and the 4-byte `approval` field (on owner consent — §4.2). Everything else
-is immutable.
-
---
-
-## 4. The manifest
-
-**Fixed layout.** Every field sits at a constant offset and is always present — `base_hash`,
-`signer_pubkey` and `signature` are zero-filled when not applicable (a full image / an unsigned container).
-Only `leaves[]` is variable (one 4-byte hash per block). So the manifest-minus-leaves (`mfl`) is **always
-197 bytes** and the parser is plain offset reads — no conditionals. Parsed by `mota_parse_manifest()`.
-
-```
-off  size   field            notes
-0    1      format_ver       = 0x02
-1    1      flags            bit0 FULL (0=delta/partial, 1=full image); bit1 SIGNED; bits2-7 reserved 0
-2    1      hash_algo        0x12 = sha2-256
-3    4      target_id        device/arch/role discriminator (§9)
-7    4      fw_version       MAJOR<<24 | MINOR<<16 | PATCH<<8 | pre   (comparable uint32)
-11   4      image_size       size of the reconstructed image (BODY||EndF)
-15   4      payload_size     PAYLOAD bytes in this container
-19   1      block_size_log2  e.g. 0x0A = 1024
-20   4      merkle_root      sha2-256:4 over PAYLOAD blocks (§6) — also the manifest_id
-24   32     image_hash       sha2-256:32 of the reconstructed image — SECURITY anchor
-56   1      codec_id         0=full/raw, 1=detools-sequential, 2=detools-in-place
-57   32     hw_id            NUL-padded ASCII hardware tag (e.g. "RAK4631"); same tag => bootable-compatible.
-                             SIGNED. Applier refuses a mismatch (brick-safety); empty on either side = skip.
-89   8      base_hash        sha2-256:8 of the BASE image's BODY (== that build's EndF.body_hash). 0 if FULL.
-97   32     signer_pubkey    Ed25519 public key. 0 if not SIGNED.
-129  64     signature        Ed25519 over manifest[0, 129). 0 if not SIGNED.
-193  4      approval         FF FF FF FF = not approved; 41 50 52 56 ("APRV") = approved
--- end of manifest-minus-leaves: mfl = 197 (constant); leaves_off = 8 + 197 = 205 in the container ---
-197  4*BC   leaves[]         BC = ceil(payload_size / 2^block_size_log2). sha2-256:4 each (the only variable field)
-```
-
-The signature always covers `manifest[0, 129)` (the head + `base_hash` + `signer_pubkey`). `approval` is
-outside the signed region so it can be flipped in place on consent without breaking the signature.
-
-Manifest-minus-leaves size (`mfl`) is a constant **197 bytes** for every container (full or delta, signed
-or unsigned). At 197 bytes the manifest exceeds one packet, so `OTA_MANIFEST` is always sent multi-fragment
-(§8.4, 2 fragments) and reassembled by the fetcher.
-
-### 4.1 Signed region
-
-`signature` covers manifest bytes `[0, 129)` — the head + `base_hash` + `signer_pubkey`. It does **not**
-cover `approval` or `leaves[]`:
-
- `leaves[]` are verified against the signed `merkle_root` (§6), so they need no separate signature.
- `approval` is device-local consent (§4.2), deliberately outside the signature.
-
-### 4.2 The `approval` field
-
- Distributed and **forced on ingest** to `FF FF FF FF` (a peer can never pre-approve).
- The local owner's `ota applydelta` writes `41 50 52 56` (`"APRV"`) — a single NOR-safe write (only clears
-  bits from the erased word). Any partial/other value reads as not-approved (fail-safe).
- Bound to this image (lives in this `.mota`'s manifest, re-erased when a new `.mota` is staged).
- A **consent** marker, not a security primitive. Authenticity = `signature` + `image_hash` + `hw_id`.
-
---
-
-## 5. Payload, codecs & delta base
-
-`PAYLOAD` is either the full reconstructed image (`FULL`) or a delta (`!FULL`).
-
-| `codec_id` | Meaning | Used by |
-|---|---|---|
-| 0 | full / raw | PAYLOAD = reconstructed image (`BODY‖EndF`). ESP32 A/B only. |
-| 1 | detools **sequential** | random read of base + sequential write of result → ESP32 A→B inactive slot. |
-| 2 | detools **in-place** | bounded scratch; rewrites the app region in place → nRF52 single-slot. |
-
-For deltas, `base_hash` = the base build's `EndF.body_hash` (sha2-256:8 of its BODY). A node applies a
-delta only if `base_hash` matches its own `EndF.body_hash`. After applying, the result MUST hash
-(sha2-256:32) to `image_hash` before it is booted — the hard security gate.
-
-**A fetcher only requests firmware it can apply.** Each node declares the codec(s) it can apply
-(`set_apply_codec`/`set_apply_codec2`): ESP32 accepts `full` + `sequential` (+ `in-place`), while nRF52
-accepts only `in-place` because its single slot cannot stage a full application image. A `.mota` with an
-unsupported codec is rejected at discovery time, before any blocks are requested. A manual pull to an
-external folder may accept other codecs because that path captures bytes and never installs them.
-
-Compression is internal to the detools patch and must be supported by the applier. Patches are produced by
-**detools 0.53.0** (`tools/mota` → `detools.create_patch`) and decoded on-device by detools' embeddable C
-decoder, vendored verbatim at `src/helpers/ota/detools/` (see its `README.meshcore.txt`). That build
-enables only the self-contained `NONE` + `CRLE` compressions (no malloc/liblzma/heatshrink), so MeshCore
-deltas use `--compression crle`. **Do not reimplement the codec** — use the vendored decoder.
-
---
-
-## 6. Merkle tree (sha2-256:4)
-
-Verifies each PAYLOAD block against the signed `merkle_root` **before** the whole payload exists, so
-corruption/forgery is localized to a block. Implemented in `MerkleTree.cpp`.
-
- **Blocks:** PAYLOAD splits into `BC = ceil(payload_size / B)` blocks, `B = 2^block_size_log2` (default
-  1024). The last block is its real length (**no zero padding**).
- **Leaf:** `leaves[i] = sha2-256:4( block_i_bytes )`.
- **Internal node:** `node = sha2-256:4( left ‖ right )` (4+4 input bytes).
- **Odd level:** an odd count promotes the **last node unchanged** to the next level (no duplication).
- **Root:** reduce until one node remains. `BC == 1` → root = `leaves[0]`. `BC == 0` is invalid.
-
-### 6.1 Proofs
-
-A proof for block `i` is the ordered list of sibling digests from leaf to root. Promoted levels contribute
-**no** element. Verification (needs `BC` to know the tree shape):
-
-```
-h = leaf_i ; idx = i ; n = BC ; p = 0
-while n > 1:
-    if (n is odd) and (idx == n-1):        # this node was promoted
-        pass
-    else:
-        sib, side = proof[p] ; p += 1
-        h = sha2-256:4( sib ‖ h ) if side==left else sha2-256:4( h ‖ sib )
-    idx //= 2 ; n = (n + 1) // 2
-accept iff h == merkle_root and p == len(proof)
-```
-
-Over LoRa, `leaves[]` are **omitted** from the manifest transfer; a serving node computes a block's proof
-on demand from its stored `leaves[]` (`OTA_REQ_PROOF`/`OTA_PROOF`, §8.5), and the fetcher fills its own
-`leaves[i]` as each verified block lands.
-
---
-
-## 7. Block availability, staging & resume
-
-There is no separate availability structure. **Block `i` is present ⟺ `leaves[i]` is non-erased**
-(`!= FF FF FF FF`). Because `leaves[]` live in the staged flash region, availability **survives reboot**.
-
-**Commit order per block (crash-safe):** (1) verify proof, (2) write block payload to its offset, (3) write
-`leaves[i]` **last**. A power loss before step 3 leaves the slot erased → the block is simply re-fetched
-(idempotent). On boot a node rebuilds an in-RAM present-bitmap by scanning `leaves[]`.
-
-**Resume (`OtaManager::resumeStaged` + `OtaStore::checkpoint`/`reopen`):** an interrupted fetch resumes from
-the staged container after a reboot — re-parse the stored manifest, recompute geometry, count present
-blocks, continue fetching the holes (or jump straight to COMPLETE). The checkpoint cadence (persist progress
-every N committed blocks) is runtime-tunable (`ota config checkpoint <N>`, 0 = only finalized containers
-resume). Stores keep `leaves[]` in RAM until flush and never auto-GC, preserving resumable progress.
-
-**Flash-store note (RX-safe writes):** a flash page-erase halts the CPU (~85 ms on nRF52) and starves LoRa
-RX, so the flash stores (`OtaStoreFlashNrf52`/`OtaStoreFlashEsp32`) **coalesce writes to the erase unit**
-(4 KB page / sector) and commit each once off the per-packet path — RAM stays O(one page), not O(image). A
-small delta that fits page 0 does zero flash I/O until COMPLETE.
-
---
-
-## 8. LoRa OTA protocol
-
-Carried in MeshCore packets with **`PAYLOAD_TYPE_OTA = 0x0C`**. Every OTA packet payload is:
-
-```
-[0]    ota_msg_type      (OtaMsgType, OtaFormat.h)
-[1..]  body              (fixed per type; encode/decode in OtaProtocol.cpp)
-```
-
-Message types:
-
-| `ota_msg_type` | val | routing | purpose |
-|---|---|---|---|
-| `OTA_ADV`          | 0x01 | flood  | tiny per-node beacon (discovery tier 1) |
-| `OTA_QUERY`        | 0x02 | flood  | ask a source for its catalog (discovery tier 2) |
-| `OTA_HAVE`         | 0x03 | flood  | the catalog reply (fragmented, digest-tagged) |
-| `OTA_GET_MANIFEST` | 0x04 | direct | request a manifest's fragments (`want_mask`) by `manifest_id` |
-| `OTA_MANIFEST`     | 0x05 | direct | the manifest-minus-leaves, fragmented |
-| `OTA_REQ`          | 0x06 | direct | request specific DATA fragments of one block (`want_mask`) |
-| `OTA_DATA`         | 0x07 | direct | one self-describing fragment of a block's data |
-| `OTA_REQ_PROOF`    | 0x08 | direct | request the merkle proof for one block |
-| `OTA_PROOF`        | 0x09 | direct | the merkle proof for one block |
-| `OTA_GET_LEAVES`   | 0x0A | direct | request the target's `leaves[]` fragments (`want_mask`) — warm-start only |
-| `OTA_LEAVES`       | 0x0B | direct | a fragment of the `leaves[]` array (for host-side seed leaf-diff) |
-
- **`manifest_id`** = the manifest's `merkle_root` (4 bytes) — a compact content id present in every
-  transfer message, so a multi-mota server dispatches each request to the right image.
- **Priority:** all OTA packets enqueue at `OTA_TX_PRIORITY = 250` (lowest). OTA never competes with mesh
-  traffic; on a busy node it is delayed indefinitely.
- **Reliability is *eventual*:** the fetcher re-requests missing fragments/blocks after a timeout, possibly
-  from a different peer. No hard ACKs, no global ordering.
- **Relay:** replies are flooded, so transparent relay needs no per-requester addressing, and the transfer
-  is trustless (the fetcher verifies every block against the signed root). Any neighbor may serve any
-  fragment it has.
- **Hop limit + duty cycle:** OTA floods accumulate one path-hash per relay (the mesh's flood routing). A
-  node *accepts* a packet only if it arrived within `ota config hops` hops (default 3; `0` = direct only)
-  and *relays* it only while still under that limit, appending its own hash. Relays are lowest-priority and
-  are skipped when the packet pool runs low (the source retries), so heavy OTA can never monopolise a
-  repeater's RAM or starve real traffic.
-
-### 8.1 Two-tier discovery
-
-Because a node may serve **many** mOTAs (its own firmware plus an external folder — §10), discovery is split
-so the periodic beacon stays tiny regardless of catalog size:
-
-**Tier 1 — `OTA_ADV` beacon** (10 bytes, constant). Flooded as a short burst at boot, then every
-`advert_mins` minutes (default 24h; runtime-tunable via `ota config advert`, `0` disables the periodic
-re-advertise). It is also emitted immediately whenever the served set changes (e.g. a `motatool` folder is
-attached/detached), so peers learn about newly-available firmware without waiting for the next interval:
-
-```
-seeder_id[4]    advertiser node id = pubkey[0:4]; the QUERY address + distinct-source id
-n_motas         uint8 — count of complete servable mOTAs (saturates at 255)
-set_digest[4]   sha2-256:4 over the SORTED set of served manifest_ids (see below)
-```
-
-`set_digest` is a **content hash of the offering**, not a counter: canonical across nodes, and it changes
-iff the set of served mids changes. A peer that has already catalogued this `{seeder, set_digest}` ignores
-the beacon (steady state is query-free). For a single served mota, `set_digest = sha2-256:4(mid)`.
-
-**Tier 2 — `OTA_QUERY` → `OTA_HAVE`** (on interest only):
-
-```
-OTA_QUERY  (flood):  seeder_id[4]  set_digest[4]  filter_target(uint32)   # filter_target 0 = everything
-OTA_HAVE   (flood):  seeder_id[4]  set_digest[4]  frag_idx(1) frag_total(1) n_rows(1)  rows[]
-  HaveRow (16 bytes, OTA_HAVE_ROW_BYTES): mid[4] target_id(4) fw_version(4) codec_id(1) flags(1) have_count(2)
-```
-
-`have_count` is the number of blocks the source holds (`== block_count` for a complete offered image).
-Receivers do not advertise partial or completed downloads as new sources.
-
-A node interested in a source's offering schedules a QUERY; the source replies with its full catalog as
-`OTA_HAVE` rows (fragmented if they exceed one packet — up to 12 rows per fragment). The heavy manifest is
-fetched per-mid only on commit (§8.3).
-
-### 8.2 Anti-storm (mandatory at mesh scale)
-
-If 50 neighbours all queried a new beacon at once, the mesh would collapse. Mitigations (gossip/mDNS
-pattern), all in `OtaManager`:
-
- **`OTA_HAVE` is flooded and digest-tagged.** EVERY node that overhears it caches the rows **passively**
-  (keyed by `{seeder, set_digest}`) — no query of its own needed.
- **Jittered query:** a peer needing a catalog schedules its `OTA_QUERY` after a random delay
-  `OTA_QUERY_MIN_MS (300) + rand(OTA_QUERY_SPREAD_MS (4000))`, derived from `id ⊕ digest ⊕ self`.
- **Overhear suppression:** during the jitter window, overhearing *another* QUERY **or** a HAVE for the same
-  `{seeder, set_digest}` CANCELS the pending query.
-
-Net effect: a digest change costs ~1 query + ~1 HAVE flood mesh-wide; a stable mesh is query-free.
-
-### 8.3 Fetch handshake
-
-```
-fetcher                                   server (any node that has the mid)
-  OTA_GET_MANIFEST(mid, want_mask)  ►     (want_mask=0xFFFF first; only missing fragments on retry)
-                               ◄───────   OTA_MANIFEST(mid, frag_idx, frag_total, bytes)   × requested frags
-  (reassemble manifest, verify, compute geometry: BC, block_size, payload_size)
-  for each missing block:
-    OTA_REQ(mid, block_idx, want_mask) ►  (want_mask=all fragments first; only the holes on retry)
-                               ◄───────   OTA_DATA(mid, block_idx, frag_off, data) × requested frags
-    (reassemble block from frag_off slices)
-    OTA_REQ_PROOF(mid, block_idx) ────►
-                               ◄───────   OTA_PROOF(mid, block_idx, n_proof, proof)
-    (verify proof vs merkle_root → write block → write leaves[i])
-  when all blocks present: verify full merkle_root + image_hash → COMPLETE
-```
-
-### 8.4 Message bodies (transfer)
-
-All offsets after the 1-byte type. Encoders/decoders in `OtaProtocol.cpp`; constants in `OtaManager.h`.
-
-```
-OTA_GET_MANIFEST:  manifest_id[4]  want_mask(uint16)   # bit k = send manifest fragment k; 0xFFFF = all
-OTA_MANIFEST:      manifest_id[4]  frag_idx(1)  frag_total(1)  bytes[]     # up to OTA_MF_FRAG=176 B/frag
-OTA_REQ:           manifest_id[4]  block_idx(uint16)  want_mask(uint16)    # bit k = send fragment k of block
-OTA_DATA:          manifest_id[4]  block_idx(uint16)  frag_off(uint16)  data[]   # up to OTA_FRAG_DATA=160 B
-OTA_REQ_PROOF:     manifest_id[4]  block_idx(uint16)
-OTA_PROOF:         manifest_id[4]  block_idx(uint16)  n_proof(1)  proof[]   # n_proof × 4 bytes
-OTA_GET_LEAVES:    manifest_id[4]  want_mask(uint16)   # bit k = send leaves fragment k; 0xFFFF = all
-OTA_LEAVES:        manifest_id[4]  frag_idx(1)  frag_total(1)  bytes[]      # up to OTA_LEAVES_FRAG=176 leaf bytes
-```
-
- **Warm-start / leaf-diff (`OTA_GET_LEAVES`/`OTA_LEAVES`) — motatool folder-capture only.** Capturing a
-  device's firmware into a `motatool serve` folder is slow (a full image is hundreds of blocks). Because
-  builds here are non-deterministic, you cannot reproduce the exact target on the host — but a *similar*
-  build (e.g. a fresh recompile) is ~99% identical. So `motatool serve --seed <similar.mota>` stages that
-  build's payload into the destination `.part`, and `ota pull <#> folder validate` makes the fetcher (1) bulk-
-  fetch the target's `leaves[]` via `OTA_GET_LEAVES`/`OTA_LEAVES` (bitmap-fragmented with a `want_mask`, same
-  anti-burst rule as `OTA_MANIFEST`), (2) recompute the merkle root from them and check it equals the
-  manifest root (authenticate), then (3) keep every seeded block whose leaf matches and pull full `OTA_DATA`
-  only for the blocks that differ. The `want_mask` is a fixed **uint16**, so `leaves[]` is capped at
-  `OTA_LEAVES_MAXFRAG=16` fragments (`OTA_DIFF_MAX_BLOCKS=704` blocks); larger images just fall back to a full
-  fetch. **Normal P2P nodes never use this** — they target only the blocks they want; the only always-on part
-  is answering `OTA_GET_LEAVES` with leaves the node already holds, so any node's firmware can be captured.
-
- **Block ⇆ fragments:** a 1 KB block is split into self-describing `OTA_DATA` fragments. `frag_off` is the
-  byte offset of `data` within the block, so the global position is `block_idx*block_size + frag_off` —
-  a fragment is self-placing when returned by the source. The fetcher tracks a
-  per-block slice bitmap and reassembles before requesting the proof.
- **Fragment-level requests (anti-deadlock + anti-congestion):** both `OTA_REQ` and `OTA_GET_MANIFEST` carry
-  a `want_mask` — bit *k* asks for fragment *k*. A fetcher requests the **full** mask on the first ask
-  (`(1<<nf)-1`, or `0xFFFF` before `frag_total` is known) and **only the still-missing bits** on any retry,
-  so recovering one lost fragment re-sends *one* fragment, not the whole block/manifest. This is essential on
-  half-duplex radios: re-requesting a whole multi-fragment burst let the periodic retry (a transmit) collide
-  with the tail of the in-flight burst and drop the same fragment forever — a hang. Requesting only the hole
-  removes the burst, so there is nothing to collide with. The mask is 16 bits, matching the reassembly bitmap
-  (≤16 fragments/block; 1 KB blocks = 7). `OTA_HAVE` (broadcast catalog gossip that self-heals via re-query)
-  and `OTA_PROOF` (a single packet) have no such burst and need no mask.
- **Data and proof are separate phases.** `OTA_DATA` carries no proof; the proof is fetched once per block
-  via `OTA_REQ_PROOF`/`OTA_PROOF` after the block's data is complete.
-
-### 8.5 Sizing against `MAX_PACKET_PAYLOAD = 184`
-
-| message | fixed overhead | payload/packet |
-|---|---|---|
-| `OTA_DATA` | 9 B (type+mid4+idx2+off2) | `OTA_FRAG_DATA = 160` → 7 frags per 1 KB block |
-| `OTA_MANIFEST` | 7 B | `OTA_MF_FRAG = 176` → signed manifest ≈ 2 frags |
-| `OTA_HAVE` | 12 B | 12 rows × 14 B per fragment |
-| `OTA_PROOF` | 8 B | up to ~44 sibling digests (≫ any real tree) |
-
-A served mota supports up to `OTA_MAX_BLOCK/4` leaves in the default 4 KB proof scratch (≤1024 blocks ≈ 1 MB
-payload); larger self-images pass a bigger scratch buffer.
-
-### 8.6 Temporary-radio and transfer boundary
-
-OTA packets may cross normal mesh relay hops, but each participating node processes or relays them only while
-its `tempradio` window is actually running. A receiver requests missing blocks in serial order from the offered
-firmware source. It never serves partial blocks and never re-advertises a completed download. This keeps each
-update as one transmitter and one receiver while still allowing active temporary-radio repeaters between them.
-
---
-
-## 9. Identity, trust & versioning
-
- **`target_id`** (4 B): `sha2-256:4(pio_env_name)` (little-endian uint32). The env name uniquely captures
-  hardware **and** role/partition, so a node auto-fetches only matching firmware (a companion image is not
-  fetched onto a repeater even though it shares `hw_id`). It is **self-described in the firmware's EndF**
-  (§2, written by `pio_endf.py`) and read via `ota_self_firmware()`, so it is correct on any build;
-  `-D MOTA_TARGET_ID` / `MainBoard::getOtaTargetId()` is the fallback when no EndF identity is present.
-  `tools/mota` reads it from the firmware's EndF (or `--target-env`). A manual `ota pull`/`want` can override
-  target (deliberate role switch); the `hw_id` brick-safety gate (§4) still applies at apply time.
- **`target_id` vs `hw_id`** — complementary, not redundant: `target_id` is the fetch-routing key
-  (hw + role + partition); `hw_id` is the human-readable brick-safety key (hardware only). Same board, two
-  roles ⇒ same `hw_id`, different `target_id`.
- **Naming a `target_id` locally:** only the 4-byte `target_id` ever travels on the wire. To show *which*
-  board/role a target is, a node (and `motatool`) reverse-looks-it-up in `src/helpers/ota/OtaTargets.h` —
-  a generated `target_id → env-name` table covering every `ENABLE_OTA` env (`tools/mota/gen_targets.py`,
-  resolved from `pio project config`). So `ota ls` can render `[Heltec_v3_repeater]` for a neighbour's
-  beacon without the string being transmitted. Unknown ids show as `other hw` / `N/A`.
- **`fw_version`:** packed comparable uint32 (`MAJOR<<24 | MINOR<<16 | PATCH<<8 | pre`); also self-described
-  in EndF. `ota ls` decodes it for display and flags each update `[yours]` / `[other hw]` / `[?]` by
-  comparing the advertised `target_id` to the node's own.
- **`hw_id`:** 32-byte NUL-padded ASCII hardware tag inside the signed head. The applier refuses a `.mota`
-  whose `hw_id` differs from the device's own tag (empty on either side = permissive). Brick-safety
-  independent of signature.
- **Signing & allowlist:** a node keeps a runtime allowlist of trusted Ed25519 signer pubkeys (none embedded
-  in firmware; `ota key add/list/rm`). A `.mota` is eligible for **auto-install** only if signed by an
-  allowlisted key, the signature verifies, and `image_hash` matches; otherwise it is manual-apply only with
-  explicit confirmation. **Transfer needs no trust** — blocks are content-addressed against the signed root.
- **Policies (persisted):** `autofetch` ∈ {off, any, signed} (default off) gates automatic block fetching of
-  own-target adverts; `autoinstall` ∈ {off, trusted} (default off) gates auto-apply of a COMPLETE signed +
-  allowlisted fetch. Conservative defaults: a fresh node discovers + announces but never fetches/installs
-  without operator intent.
- **Supersession:** a newer version announced mid-download does not abort the in-progress transfer
-  (finish-current).
-
---
-
-## 10. Multi-mota serve & the external "folder" relay
-
-A node serves a **set** of mOTAs: its own firmware plus, optionally, an external folder of `.mota` files it
-relays without holding them in flash. To peers it simply "has N mOTAs"; the relay is trustless (fetchers
-verify everything). The serve side (`OtaManager`) keeps a lightweight registry of what it advertises and two
-resident "views": `view0` (its own firmware) and one on-demand view loaded from a source when a request
-targets an external mota. Every fetch message carries `manifest_id`, so dispatch is a registry lookup.
-
-The same host-folder link is also a **pull destination** (the reverse direction): `ota pull <#> folder`
-fetches a `.mota` off the mesh and streams it onto the host as `<mid>.mota` via the seeder STORAGE ops
-(`OP_STAT/BEGIN/WRITE/SREAD/FIN`, see `MotaSeederProto.h`), using a `FolderMotaStore` as the fetch's
-`OtaStore` instead of RAM/flash. This captures an exact copy of a device's firmware — e.g. to build a delta
-against firmware you don't have. Resume is bookkeeping-free: `BEGIN` 0xFF-fills the file and, on reconnect
-after a link drop (the fetch PAUSES, holding progress on the host — no RAM/flash fallback), `STAT`+`SREAD`
-let the fetcher recompute and refill only the missing blocks.
-
-### 10.1 The `MotaSource` abstraction (`OtaSource.h`)
-
-Transport-agnostic provider of one or more complete `.mota` as random-access bytes. The same serve code
-drives USB-serial, BLE, a WiFi URL list, an NFS/samba mount, etc. — only `read()` differs.
-
-```cpp
-struct MotaDesc {                      // catalog metadata + region offsets (no whole image in RAM)
-  uint8_t mid[4]; uint32_t target_id, fw_version; uint8_t codec_id, flags;
-  uint32_t total_size, leaves_off, block_count, payload_off, payload_size;
-};
-class MotaSource {
-  virtual uint8_t count();                                  // # mOTAs offered
-  virtual bool    describe(uint8_t idx, MotaDesc& out);     // metadata + offsets
-  virtual bool    read(uint8_t idx, uint32_t off, uint8_t* buf, uint32_t len);   // random-access bytes
-};
-```
-
-To serve an external mota the node reads its manifest-minus-leaves + `leaves[]` into RAM (≤4 KB for ≤1024
-blocks) and streams payload blocks from the source on demand; proofs are generated from the read leaves.
-
-### 10.2 The `mota-seeder` transport (`MotaSeederProto.h`)
-
-A `MotaSource` is fed by a host that serves a folder over the device's **USB serial** (the same console the
-CLI uses — no extra hardware) or, on an ESP32 WiFi companion, over **WiFi (TCP)**. The host is the
-standalone Rust tool [`motatool`](https://github.com/vk496/motatool) (`motatool serve --serial <port>` /
-`--tcp <host[:port]>`, which also builds + verifies + inspects `.mota`). The device only emits request frames *while
-actively serving a fetch*, and reads the reply synchronously, so over the shared USB console binary frames
-coexist with the text CLI/logs (resync on magic + checksum). Little-endian, XOR-checksummed:
-
-```
-request  (device → host):  'M' 'S'  op(1)  args...                 xsum(1 = XOR of op+args)
-response (host → device):  'm' 's'  op(1)  status(1)  payload...    xsum(1 = XOR of all prior)
-
-OP_COUNT     0x01   args: -            → payload: count(1)
-OP_DESCRIBE  0x02   args: idx(1)       → payload: MotaDesc wire (38 B)
-OP_READ      0x03   args: idx(1) off(4) len(2)  → payload: len bytes
-MotaDesc wire (38 B): mid[4] target_id(4) fw_version(4) codec(1) flags(1)
-                      total_size(4) leaves_off(4) block_count(4) payload_off(4) payload_size(4)
-status: 0 = OK, non-zero = error (out of range / past EOF).
-```
-
-Device CLI: `ota folder on` (attach + announce), `ota folder` (list), `ota folder off`. Build flag
-`OTA_FOLDER_SERIAL` (default stream = console `Serial`; override `OTA_FOLDER_SERIAL_STREAM` + define
-`OTA_FOLDER_SERIAL_BEGIN` for a dedicated UART). On an ESP32 WiFi companion the node also runs a second
-`WiFiServer` on a **dedicated seeder port** (`OTA_SEEDER_TCP_PORT`, default `5001`), separate from the
-companion app port (`TCP_PORT`, default `5000`) — so `motatool serve --tcp` can feed updates while a phone
-app stays connected. The node auto-attaches the source when a seeder client connects and detaches when it
-closes (no `ota folder on` needed over TCP). Verified on hardware: a RAK4631 relays a host folder to a
-Heltec V3 over one USB cable, and a host feeds a Heltec V3 over WiFi (`:5001`) while the companion serves a
-phone on `:5000` — every block merkle-checked.
-
-**Transport-agnostic by design.** The request/response *semantics* (`COUNT` / `DESCRIBE(idx)` /
-`READ(idx, off, len)` over a folder catalog) are independent of the link. The 2-byte magic + XOR checksum +
-resync framing above exists for the shared USB-UART (an unframed byte stream); it is harmless over a
-reliable stream and the **WiFi (TCP)** transport reuses it as-is — both ends just treat the socket as a
-byte stream (on-device, `SerialMotaSource` runs verbatim over an Arduino `Stream`-compatible `WiFiClient`;
-`motatool`'s `TcpTransport` mirrors its `SerialTransport`). A future framed link such as **BLE GATT** (an
-Android phone relaying a folder) could carry the same ops with no magic/checksum at all — a request
-characteristic write delivers `op + args`, the reply notifies `status + payload`. `motatool` reflects this
-split: a transport-free `SeederCore` (the catalog logic) under a swappable framing/transport layer.
-
---
-
-## 11. CLI surface (`OtaCli.cpp`)
-
-User-facing OTA data should travel via `CMD_OTA_*` companion binary frames; the text CLI below is
-debug/operator oriented and replies are `snprintf`-bounded into a 160-byte buffer.
-
-Commands take intuitive aliases (matched by the first word; see `is_cmd` in `OtaCli.cpp`) so they're easy
-to type and read — `status`/`neighbors`/`pull`/`drop`/`applydelta` are the canonical names, the aliases are
-the recommended user-facing forms. Output is plain-language (a user-facing guide lives at
-[ota_user_guide.md](ota_user_guide.md)).
-
-```
-ota help | ?                       list the commands
-ota status | st  (or bare `ota`)   plain-language: running fw, the one fetch session (state/%/id), serving, keys
-ota ls | neighbors | nbrs | updates | n   discovered updates (queries sources; rows arrive async via OTA_HAVE)
-ota get | pull | download <#|mid8> fetch a chosen mOTA (manual; works regardless of autofetch)
-ota install | apply | applydelta   verify + approve + (ESP32) apply / (nRF52) reboot-to-bootloader
-ota cancel | drop | stop           drop the current fetch session (frees the slot)
-ota announce | adv                 serve self + send a beacon now
-ota self | id                      print this firmware's EndF (body/image size, base_hash)
-ota folder | fold [on|off]         attach/detach an external .mota folder (host daemon) ; bare = list
-ota config | cfg | set [autofetch|autoinstall|checkpoint] ...   show/set persisted policy
-ota key | keys [add|rm <hex>]      trusted signer allowlist ; bare = list
-ota dev ...                        bring-up helpers (stage/recv/serve/verify)
-```
-
---
-
-## 12. Apply & bootloader contract
-
- **ESP32 (A/B):** applied in-firmware via the detools decoder into the inactive OTA slot
-  (`OtaApply.cpp::ota_apply_detools_mota` + `OtaStoreFlashEsp32`), then set-boot + reboot (power-safe,
-  rollback-capable). No bootloader changes. Erase ranges must be sector-aligned (4096).
- **nRF52 (single-slot):** the running firmware **never** flashes the app. `ota applydelta` verifies fully
-  (`image_hash`, `base_hash`, signature/allowlist, `hw_id`), writes `approval = "APRV"`, then reboots into
-  the modified bootloader (`Adafruit_nRF52_Bootloader_OTAFIX`). The bootloader:
-  1. **scans flash for `MAGIC`** to find the staged `.mota` (it must NOT trust any stored size),
-  2. re-checks `TRAILER`, `image_hash`, `approval == "APRV"`, and that the delta's `base_hash` equals the
-     running firmware's `EndF.body_hash` (recomputed by scanning for `EndF` — never trust `bank_0_size`),
-  3. applies the in-place codec over the app region and boots only if the result hashes to `image_hash`.
-
-The signature proves author authenticity; `approval` proves local owner consent — both required to apply.
-
-> **Bootloader testing note:** always test apply with a *real different* image (base ≠ target). A same-image
-> (X→X) "delta" trivially reproduces the target and gives a false positive.
-
---
-
-## 13. Versioning of this spec
-
-`format_ver = 2`. A parser accepts exactly this value and rejects anything else — there is one container
-format, fixed-layout, and no compatibility shims to carry. If the format ever needs to change, bump
-`format_ver`; the multihash `hash_algo` separately allows swapping the digest family without a format
-bump. Unknown `codec_id` / `ota_msg_type` values are ignored (a node simply won't fetch what it can't apply).
@@ -1,298 +0,0 @@
-# Updating your node over the air (OTA) — user guide
-
-This guide is for **node operators**: how to update your MeshCore device's firmware over the radio, in
-plain language. No cables, no programmer — your node can download a new firmware from a neighbour and
-install it. (For the technical wire format, see [the OTA protocol spec](ota_protocol.md).)
-
-LoRa OTA is present only in standard, non-logging Keymind repeater, room-server, and sensor firmware. MQTT
-bridge, logging, and roles without `tempradio` support exclude it.
-OTA radio traffic is accepted, generated, and relayed only while `tempradio` is actually running on that node.
-Every source, receiver, and intermediate repeater must therefore have an overlapping temporary-radio window.
-
-> **Is my node supported?** LoRa OTA firmware is available for supported **ESP32** boards and nRF52
-> repeater targets. Every nRF52 installation requires the OTAFIX bootloader built for that exact board;
-> having an OTA-capable application image alone is not enough. Check the bootloader release for an exact
-> board match before attempting an update.
-
-The following nRF52 repeater targets gained firmware-side LoRa OTA support in this release without losing
-their normal external-sensor support:
-
- Heltec Mesh Solar, T1, and Tower V2
- Keepteen LT1, LilyGo T-Impulse Plus, Mesh Pocket, and Nano G2 Ultra
- Minewsemi ME25LS01, RAK3401, SenseCAP Solar, and Wio WM1110
-
-The full-sensor `RAK_4631_repeater` image is too large for the safe nRF52 in-place update limit. Use
-`RAK_4631_repeater_no_external_sensors_lora_ota` when LoRa OTA is required. That target removes optional
-external environmental/GPS sensor packages, but retains the RAK4631's built-in battery-voltage reading,
-battery telemetry, and `battery.alert` behavior.
-
---
-
-## The important part first: it's safe
-
- **Nothing installs by itself.** Your node can *discover* and *download* an update in the background, but
-  it only **installs** when you say so (unless you deliberately turn on auto-install — see below).
- **Bad downloads can't sneak in.** Every piece of the firmware is checked against a cryptographic
-  fingerprint as it arrives, and the whole image is verified again before install. A corrupt or tampered
-  download is rejected, not installed.
- **You choose who to trust.** Updates can be *signed* by their author. You can tell your node to only
-  auto-install firmware signed by keys you've added.
- **It won't disrupt your mesh.** OTA traffic is always the **lowest priority** — your node only spends
-  spare airtime on it. Messages and routing always come first; a busy node simply updates later. Think of
-  it as *"eventually upgradable."*
- **It can recover.** If an install ever fails, the node falls back to a safe recovery mode (you can
-  re-flash a known-good firmware over USB) — it won't be left bricked.
-
---
-
-## How to talk to your node
-
-Connect to your node's **console** — usually a USB serial terminal at **115200 baud** (or whatever tool
-you already use to manage the node). You type `ota ...` commands and the node replies in plain words.
-
-The commands have short, friendly names (and most accept aliases, so you don't have to remember exact
-spelling): type **`ota help`** any time to see the list, or just **`ota`** for a status summary.
-
---
-
-## Common tasks
-
-### 1. See what I'm running and whether anything is going on
-
-```
-ota status
-```
-
-Shows your current firmware version, your node's update "target" (its hardware/role id), and whether a
-download is in progress.
-
-For a denser admin view — your firmware's content id (`mid`) **and** its body hash, the fingerprint of the
-set you're serving, live download progress, and the current policy — use:
-
-```
-ota stats
-```
-
-On a remote node this is **admin-only** (the remote command console requires the admin password) — send it
-from the app's repeater command screen, or the WiFi/serial OTA console.
-
-### 2. Find updates available near me
-
-```
-ota ls
-```
-
-Your node asks around and lists the firmware updates other nodes nearby are offering, in plain words —
-each with a **number**, its version, whether it's a full image or a small delta, how many nodes have it,
-and how recently it was seen. For example:
-
-```
-Updates nearby (2 src) — `ota get <#>` to download:
- 1) v1.2.3 delta [yours] 3n 5s
- 2) v1.2.0 full [other hw] 1n 12s [downloading]
-```
-
-Each row shows the version, full-vs-delta, **whether it fits your node**, how many nodes have it, and how
-long ago it was seen. The fit marker:
-
- **[yours]** — built for your exact hardware **and** role; safe to install.
- **[other hw]** — a different board or role (e.g. a companion image, or another board). Don't install it.
- **[?]** — can't tell (a build with no target id set, e.g. a bare IDE build rather than a release build).
-
-Run it again after a few seconds — discovery happens in the background, so the list fills in. Nothing is
-downloaded yet; this is just looking around. (`ota neighbors` / `ota updates` also work.)
-
-### 3. Download an update
-
-Pick one from the list by its **number**, and say **where** to put it:
-
-```
-ota pull 1 flash            # stage it in this node's flash, to install here
-ota pull 1 folder           # capture it onto a connected motatool folder as <id>.mota (don't install here)
-ota pull 1 folder validate  # same capture, warm-started from a motatool --seed build (much faster; below)
-```
-
-The destination is required — `ota pull 1` on its own just shows the choices. **`flash`** is always
-available (stage here, then `ota install`). **`folder`** appears only while a `motatool serve` link is
-attached (it shows the link, e.g. `folder: tcp 192.168.4.5`); it streams the firmware straight onto the
-host folder — nothing is staged on this node. That's how you grab an **exact copy of another device's
-firmware** off the mesh (to a `.mota` file) so you can later build a *delta* against firmware you don't
-otherwise have. (`ota get` is an alias.)
-
-**`validate` (warm-start, advanced).** Capturing a full image over the radio is slow. If you have a
-*similar* build on the computer (e.g. a fresh recompile of the same firmware), run motatool with
-`--seed <that.mota>` and add **`validate`**: the node fetches just the target's block fingerprints, keeps
-every block your seed already matches, and pulls over the radio only the handful that actually differ —
-turning a ~30-minute capture into seconds. The result is still a byte-exact, verified copy of the target.
-
-*Where the seed comes from:* it is the **`--seed <file>` you pass to `motatool serve`** — **not** a file you
-drop into the capture (`--dir`) folder, which is only the destination and starts empty. There is exactly one
-configured seed. When you run `... folder validate`, the node asks motatool to begin the capture and motatool
-stamps that seed's payload into the fresh `.part` in the same step — so it is always the file you named, with
-no guessing. **`validate` is the switch:** a plain `folder` pull ignores any seed and fetches from scratch;
-re-running a `validate` pull re-begins fresh (it never resumes a stale partial). Nothing about the seed is
-trusted — every kept block is checked against the target's own fingerprints, so a mismatched or missing seed
-just means those blocks are fetched over the radio (correct result, only slower).
-
-The node fetches from one source, **at low priority**, one block at a time. Mesh repeaters may carry the
-packets, but only while their temporary-radio windows are active. Check progress with `ota status`.
-
-If a `folder` pull loses its link mid-transfer, `ota status` shows **paused** — the host keeps the
-partial and the pull resumes (filling only what's missing) the moment you reconnect motatool; it never
-falls back to flash. To **stop** a download you no longer want:
-
-```
-ota cancel
-```
-
-### 4. Install a downloaded update
-
-Once `ota status` shows the download is **ready to install**:
-
-```
-ota install
-```
-
-The node verifies the firmware one last time, and if everything checks out it installs it and **reboots
-into the new version**. If the check fails, it tells you why and does **not** install. (If you haven't
-added the signer's key, an unsigned/untrusted image will only install with this explicit command — never
-automatically.)
-
-After it reboots, run `ota status` to confirm the new version.
-
-### 5. If something goes wrong
-
- A download that stalls or gets interrupted just **resumes** later, or you can `ota cancel` and try again.
- If an **install** fails, the node won't boot a broken image — it lands in **recovery mode**:
-  - **nRF52:** it appears as a USB drive; drag a known-good firmware `.uf2` for that exact board onto it
-    to recover.
-  - **ESP32:** it keeps the previous firmware in the other slot and rolls back.
- When in doubt, you can always re-flash over USB the normal way.
-
---
-
-## Optional: let it update automatically
-
-By default your node only *discovers* updates — it won't download or install on its own. If you want more
-automation (e.g. for a remote node you can't easily reach), you can opt in. These settings are saved.
-
-```
-ota config autofetch any        # auto-DOWNLOAD any compatible update for this node (still won't install)
-ota config autofetch signed     # auto-download only signed updates
-ota config autofetch off        # back to manual (default)
-
-ota config autoinstall trusted  # auto-INSTALL a downloaded update IF it's signed by a key you trust
-ota config autoinstall off      # never auto-install (default)
-
-ota config advert 1440          # re-advertise every N minutes while temp radio is running
-ota config advert 0             # only advertise when a temp-radio window starts
-
-ota config hops 3               # how far OTA travels: accept from / relay up to N repeater hops (default 3)
-ota config hops 0               # only exchange OTA with directly-connected nodes (never relay)
-
-ota config                      # show the current settings
-```
-
-Recommended for most people: leave both **off** and update by hand. Use `autoinstall trusted` only once
-you've added the signer's key (next section) and you trust them to push updates unattended.
-
---
-
-## Optional: only trust updates from specific people
-
-If you'll use auto-install, tell your node which signing keys to trust. The firmware author shares their
-**public** key (a hex string); you add it:
-
-```
-ota key add <public-key-hex>    # trust this signer
-ota key list                    # show trusted signers
-ota key rm <public-key-hex>     # stop trusting one
-```
-
-Only updates signed by a trusted key are eligible for auto-install. Manual `ota install` still lets you
-install anything yourself, on your own responsibility.
-
---
-
-## Sharing updates with others (advanced)
-
-### Relay a folder of firmware from a computer
-
-If your node is connected to a computer (e.g. a gateway on a Raspberry Pi), it can **hand out** a whole
-folder of firmware files to the mesh — without storing them itself. Useful for seeding a new release to a
-remote area.
-
-1. Put the firmware files (`.mota` files — see below) in a folder on the computer.
-2. Install the helper tool once — the standalone `motatool` CLI (<https://github.com/vk496/motatool>) —
-   then point it at your node and the folder — over the node's **USB serial**, or over **WiFi** if it's
-   an ESP32 companion on your network:
-   ```
-   git clone https://github.com/vk496/motatool && cargo install --path ./motatool
-   # over USB serial:
-   motatool serve --dir ./my_firmware/ --serial /dev/ttyACM0 -v
-   # …or over WiFi (ESP32 companion): the seeder is on a DEDICATED port (5001), separate from the
-   # phone-app port (5000), so a phone can stay connected while you serve:
-   motatool serve --dir ./my_firmware/ --tcp 192.168.1.50:5001 -v
-   ```
-   It answers the node's requests; your node then advertises those updates to neighbours, who can
-   `ota get` them like any other. (A WiFi node prints its IP + seeder port to the serial log on connect.
-   Details: <https://github.com/vk496/motatool>.)
-
-To stop, just stop the daemon — over WiFi the node auto-detaches when the connection closes; over USB you
-can also run `ota folder off` on the node. `ota folder` on its own lists what your node is offering.
-
-### Everyone helps share
-
-You don't have to be a gateway to help. Once **any** node finishes downloading an update, it automatically
-offers it to *its* neighbours too. So a new firmware spreads outward node-to-node, instead of everyone
-hammering the one node that had it first — and no node is ever overloaded, because all of this stays
-lowest-priority.
-
---
-
-## Where firmware files come from
-
-OTA distributes **`.mota`** files — a packaged, verifiable firmware image (full image or a small "delta"
-that only contains what changed). You get them by:
-
- **Downloading a build.** This fork publishes a rolling **`dev-latest`** release on GitHub with the
-  current firmware for many boards, each accompanied by a `.full.mota` and a tiny `.delta.mota`. Grab the
-  one for your board to test.
- **Building your own** with the `mota` packaging tool — see [tools/mota/README.md](../tools/mota/README.md)
-  (this is for people distributing updates, not everyday operators).
-
---
-
-## Quick reference
-
-| I want to… | Command |
-|---|---|
-| List all commands | `ota help` |
-| See my firmware + any download | `ota status` (or just `ota`) |
-| Admin: ids/hashes + serving + policy | `ota stats` (admin-only remotely) |
-| Find updates nearby | `ota ls` |
-| Download update #1 for installation | `ota get 1 flash` |
-| Cancel a download | `ota cancel` |
-| Install a finished download | `ota install` |
-| Turn on auto-download | `ota config autofetch any` |
-| Turn on auto-install (trusted only) | `ota config autoinstall trusted` |
-| Trust a signer | `ota key add <hex>` |
-| Relay a folder (gateway) | `ota folder on` + the seeder daemon |
-| List what I'm offering | `ota folder` |
-
-(Older names still work too: `neighbors`/`updates` = `ls`, `pull` = `get`, `applydelta`/`apply` = `install`, `drop`/`stop` = `cancel`.)
-
---
-
-## A few terms
-
- **Firmware** — the software running your node. Updating it can add features or fix bugs.
- **`.mota`** — a packaged firmware update file, with built-in integrity checks.
- **Target** — your node's hardware + role identity. Your node only auto-fetches updates built for the
-  same target, so it won't grab firmware meant for a different board.
- **Delta** — a small update containing only the changes from your current firmware (faster to send than a
-  full image). Your node rebuilds the complete firmware from it and verifies the result before installing.
- **Signed** — the update carries the author's cryptographic signature, so you can verify who made it.
-
-For the full technical details (the file format and the radio protocol), see
-[the OTA protocol spec](ota_protocol.md).
@@ -12,6 +12,7 @@ Inside each [MeshCore Packet](./packet_format.md) is a payload, identified by th
 * Group text message (unverified).
 * Group datagram (unverified).
 * Multi-part packet
+* Control data packet
 * Custom packet (raw bytes, custom encryption).

 This document defines the structure of each of these payload types.
@@ -22,7 +23,7 @@ NOTE: all 16 and 32-bit integer fields are Little Endian.

 * Node hash: the first byte of the node's public key

-# Node advertisement
+## Node advertisement
 This kind of payload notifies receivers that a node exists, and gives information about the node

 | Field         | Size (bytes)    | Description                                              |
@@ -56,7 +57,7 @@ Appdata Flags
 | `0x40` | has feature 2  | Reserved for future use.              |
 | `0x80` | has name       | appdata contains a node name          |

-# Acknowledgement
+## Acknowledgement

 An acknowledgement that a message was received. Note that for returned path messages, an acknowledgement can be sent in the "extra" payload (see [Returned Path](#returned-path)) instead of as a separate acknowledgement packet. CLI commands do not cause acknowledgement responses, neither discrete nor extra.

@@ -65,7 +66,7 @@ An acknowledgement that a message was received. Note that for returned path mess
 | checksum | 4            | CRC checksum of message timestamp, text, and sender pubkey |


-# Returned path, request, response, and plain text message
+## Returned path, request, response, and plain text message

 Returned path, request, response, and plain text messages are all formatted in the same way. See the subsection for more details about the ciphertext's associated plaintext representation.

@@ -76,7 +77,7 @@ Returned path, request, response, and plain text messages are all formatted in t
 | cipher MAC       | 2               | MAC for encrypted data in next field                 |
 | ciphertext       | rest of payload | encrypted message, see subsections below for details |

-## Returned path
+### Returned path

 Returned path messages provide a description of the route a packet took from the original author. Receivers will send returned path messages to the author of the original message.

@@ -87,7 +88,7 @@ Returned path messages provide a description of the route a packet took from the
 | extra type  | 1            | extra, bundled payload type, eg., acknowledgement or response. Same values as in [Packet Format](./packet_format.md) |
 | extra       | rest of data | extra, bundled payload content, follows same format as main content defined by this document                         |

-## Request
+### Request

 | Field        | Size (bytes)    | Description                              |
 |--------------|-----------------|------------------------------------------|
@@ -101,7 +102,7 @@ For the common chat/server helpers in `BaseChatMesh`, the current request type v
 | `0x01` | get stats | get stats of repeater or room server               |
 | `0x02` | keepalive | keep-alive request used for maintained connections |

-### Get stats
+#### Get stats

 Gets information about the node, possibly including the following:

@@ -124,32 +125,32 @@ Gets information about the node, possibly including the following:
 * Number posted (?)
 * Number of post pushes (?)

-### Get telemetry data
+#### Get telemetry data

 Not defined in `BaseChatMesh`. Sensor- and application-specific request payloads may be implemented by higher-level firmware.

-### Get Telemetry
+#### Get Telemetry

 Not defined in `BaseChatMesh`.

-### Get Min/Max/Ave  (Sensor nodes)
+#### Get Min/Max/Ave  (Sensor nodes)

 Not defined in `BaseChatMesh`.

-### Get Access List
+#### Get Access List

 Not defined in `BaseChatMesh`.

-### Get Neighbors
+#### Get Neighbors

 Not defined in `BaseChatMesh`.

-### Get Owner Info
+#### Get Owner Info

 Not defined in `BaseChatMesh`.


-## Response
+### Response

 | Field   | Size (bytes)    | Description                       |
 |---------|-----------------|-----------------------------------|
@@ -157,7 +158,7 @@ Not defined in `BaseChatMesh`.

 Response contents are opaque application data. There is no single generic response envelope beyond the encrypted payload wrapper shown above.

-## Plain text message
+### Plain text message

 | Field              | Size (bytes)    | Description                                                                       |
 |--------------------|-----------------|-----------------------------------------------------------------------------------|
@@ -165,7 +166,7 @@ Response contents are opaque application data. There is no single generic respon
 | txt_type + attempt | 1               | upper six bits are txt_type (see below), lower two bits are attempt number (0..3) |
 | message            | rest of payload | the message content, see next table                                               |

-Flags
+txt_type

 | Value  | Description               | Message content                                                          |
 |--------|---------------------------|--------------------------------------------------------------------------|
@@ -173,7 +174,7 @@ Flags
 | `0x01` | CLI command               | the command text of the message                                          |
 | `0x02` | signed plain text message | first four bytes is sender pubkey prefix, followed by plain text message |

-# Anonymous request
+## Anonymous request

 | Field            | Size (bytes)    | Description                               |
 |------------------|-----------------|-------------------------------------------|
@@ -182,15 +183,22 @@ Flags
 | cipher MAC       | 2               | MAC for encrypted data in next field      |
 | ciphertext       | rest of payload | encrypted message, see below for details  |

-Plaintext message
+### Room server login

 | Field          | Size (bytes)    | Description                                                                   |
 |----------------|-----------------|-------------------------------------------------------------------------------|
-| timestamp      | 4               | send time (unix timestamp)                                                    |
-| sync timestamp | 4               | NOTE: room server only! - sender's "sync messages SINCE x" timestamp |
-| password       | rest of message | password for repeater/room                                                    |
+| timestamp      | 4               | sender time (unix timestamp)                                                  |
+| sync timestamp | 4               | sender's "sync messages SINCE x" timestamp                                    |
+| password       | rest of message | password for room                                                             |

-## Repeater - Regions request
+### Repeater/Sensor login
+
+| Field          | Size (bytes)    | Description                                                                   |
+|----------------|-----------------|-------------------------------------------------------------------------------|
+| timestamp      | 4               | sender time (unix timestamp)                                                  |
+| password       | rest of message | password for repeater/sensor                                                  |
+
+### Repeater - Regions request

 | Field          | Size (bytes) | Description                  |
 |----------------|--------------|------------------------------|
@@ -199,7 +207,7 @@ Plaintext message
 | reply path len | 1            | path len for reply           |
 | reply path     | (variable)   | reply path                   |

-## Repeater - Owner info request
+### Repeater - Owner info request

 | Field          | Size (bytes) | Description                  |
 |----------------|--------------|------------------------------|
@@ -208,7 +216,7 @@ Plaintext message
 | reply path len | 1            | path len for reply           |
 | reply path     | (variable)   | reply path                   |

-## Repeater - Clock and status request
+### Repeater - Clock and status request

 | Field          | Size (bytes) | Description                  |
 |----------------|--------------|------------------------------|
@@ -218,7 +226,7 @@ Plaintext message
 | reply path     | (variable)   | reply path                   |


-# Group text message
+## Group text message

 | Field        | Size (bytes)    | Description                                  |
 |--------------|-----------------|----------------------------------------------|
@@ -228,7 +236,10 @@ Plaintext message

 The plaintext contained in the ciphertext matches the format described in [plain text message](#plain-text-message). Specifically, it consists of a four byte timestamp, a flags byte, and the message. The flags byte will generally be `0x00` because it is a "plain text message". The message will be of the form `<sender name>: <message body>` (eg., `user123: I'm on my way`).

-# Group datagram
+The sender name is unverified message text. Group messages contain no sender
+signature, so any channel-key holder can choose any sender name.
+
+## Group datagram

 | Field        | Size (bytes)    | Description                                  |
 |--------------|-----------------|----------------------------------------------|
@@ -245,8 +256,32 @@ The data contained in the ciphertext uses the format below:
 | data      | rest of payload | (depends on data type)                                   |


-TODO: describe what datagram looks like
+## Control data

-# Custom packet
+| Field        | Size (bytes)    | Description                                |
+|--------------|-----------------|--------------------------------------------|
+| flags        | 1               | upper 4 bits is sub_type                   |
+| data         | rest of payload | typically unencrypted data                 |
+
+### DISCOVER_REQ (sub_type)
+
+| Field        | Size (bytes)    | Description                                  |
+|--------------|-----------------|----------------------------------------------|
+| flags        | 1               | 0x8 (upper 4 bits), prefix_only (lowest bit) |
+| type_filter  | 1               | bit for each ADV_TYPE_*                      |
+| tag          | 4               | randomly generate by sender                  |
+| since        | 4               | (optional) epoch timestamp (0 by default)    |
+
+### DISCOVER_RESP (sub_type)
+
+| Field        | Size (bytes)    | Description                                |
+|--------------|-----------------|--------------------------------------------|
+| flags        | 1               | 0x9 (upper 4 bits), node_type (lower 4)    |
+| snr          | 1               | signed, SNR*4                              |
+| tag          | 4               | reflected back from DISCOVER_REQ           |
+| pubkey       | 8 or 32         | node's ID (or prefix)                      |
+
+
+## Custom packet

 Custom packets have no defined format.
@@ -12,8 +12,10 @@ meshcore://channel/add?name=Public&secret=8b3387e9c5cdea6ac9e5edbaa115cd72

 **Parameters**:

- `name`: Channel name (URL-encoded if needed)
+- `name`: Channel name (URL-encoded)
 - `secret`: 16-byte secret represented as 32 hex characters
+- `region_scope`: Region Scope (optional, URL-encoded if provided)
+    - Supported by MeshCore App v1.47.0+

 ## Add Contact

@@ -4,7 +4,7 @@
 #include <helpers/ui/DisplayDriver.h>
 #include <helpers/ui/UIScreen.h>
 #include <helpers/SensorManager.h>
-#include <helpers/BaseSerialInterface.h>
+#include <helpers/MultiSerialInterface.h>
 #include <Arduino.h>

 #ifdef PIN_BUZZER
@@ -25,10 +25,10 @@ enum class UIEventType {
 class AbstractUITask {
 protected:
  mesh::MainBoard* _board;
-  BaseSerialInterface* _serial;
+  MultiSerialInterface* _interfaceManager;
  bool _connected;

-  AbstractUITask(mesh::MainBoard* board, BaseSerialInterface* serial) : _board(board), _serial(serial) {
+  AbstractUITask(mesh::MainBoard* board, MultiSerialInterface* interfaceManager) : _board(board), _interfaceManager(interfaceManager) {
    _connected = false;
  }

@@ -36,9 +36,9 @@ public:
  void setHasConnection(bool connected) { _connected = connected; }
  bool hasConnection() const { return _connected; }
  uint16_t getBattMilliVolts() const { return _board->getBattMilliVolts(); }
-  bool isSerialEnabled() const { return _serial->isEnabled(); }
-  void enableSerial() { _serial->enable(); }
-  void disableSerial() { _serial->disable(); }
+  bool isBluetoothEnabled() const { return _interfaceManager->isBluetoothEnabled(); }
+  void enableBluetooth() { _interfaceManager->enableBluetooth(); }
+  void disableBluetooth() { _interfaceManager->disableBluetooth(); }
  virtual void msgRead(int msgcount) = 0;
  virtual void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) = 0;
  virtual void notify(UIEventType t = UIEventType::none) = 0;
@@ -189,17 +189,22 @@ bool DataStore::saveMainIdentity(const mesh::LocalIdentity &identity) {
  return identity_store.save("_main", identity);
 }

-void DataStore::loadPrefs(NodePrefs& prefs, double& node_lat, double& node_lon) {
-  if (_fs->exists("/new_prefs")) {
-    loadPrefsInt("/new_prefs", prefs, node_lat, node_lon); // new filename
-  } else if (_fs->exists("/node_prefs")) {
-    loadPrefsInt("/node_prefs", prefs, node_lat, node_lon);
-    savePrefs(prefs, node_lat, node_lon);                // save to new filename
-    _fs->remove("/node_prefs"); // remove old
+void DataStore::loadPrefs(NodePrefs& prefs) {
+  if (_fs->exists("/prefs.json")) {
+    File file = openRead(_fs, "/prefs.json");
+    if (file) {
+      prefs.loadSerial(file);   // new Serial prefs
+      file.close();
+    }
+  } else if (_fs->exists("/new_prefs")) {
+    loadPrefsInt("/new_prefs", prefs);
+    if (savePrefs(prefs) ) {                // save to new format
+      //_fs->remove("/new_prefs"); // remove old
+    }
  }
 }

-void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& node_lat, double& node_lon) {
+void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs) {
  File file = openRead(_fs, filename);
  if (file) {
    uint8_t pad[8];
@@ -207,12 +212,12 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
    file.read((uint8_t *)&_prefs.airtime_factor, sizeof(float));                           // 0
    file.read((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name));                      // 4
    file.read(pad, 4);                                                                     // 36
-    file.read((uint8_t *)&node_lat, sizeof(node_lat));                                     // 40
-    file.read((uint8_t *)&node_lon, sizeof(node_lon));                                     // 48
+    file.read((uint8_t *)&_prefs.node_lat, sizeof(_prefs.node_lat));                       // 40
+    file.read((uint8_t *)&_prefs.node_lon, sizeof(_prefs.node_lon));                       // 48
    file.read((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
    file.read((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
    file.read((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.read((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
+    file.read((uint8_t *)&_prefs._client_repeat, sizeof(_prefs._client_repeat));             // 62
    file.read((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
    file.read((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
    file.read((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
@@ -233,51 +238,22 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
    file.read((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain));         // 89
    file.read((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name));    // 90
    file.read((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key));     // 121
-    file.read((uint8_t *)&_prefs.radio_fem_rxgain, sizeof(_prefs.radio_fem_rxgain));      // 122
+
+    // migrate old fields
+    _prefs.setRepeatEn(_prefs._client_repeat != 0);

    file.close();
  }
 }

-void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_lon) {
-  File file = openWrite(_fs, "/new_prefs");
+bool DataStore::savePrefs(NodePrefs& _prefs) {
+  File file = openWrite(_fs, "/prefs.json");
  if (file) {
-    uint8_t pad[8];
-    memset(pad, 0, sizeof(pad));
-
-    file.write((uint8_t *)&_prefs.airtime_factor, sizeof(float));                           // 0
-    file.write((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name));                      // 4
-    file.write(pad, 4);                                                                     // 36
-    file.write((uint8_t *)&node_lat, sizeof(node_lat));                                     // 40
-    file.write((uint8_t *)&node_lon, sizeof(node_lon));                                     // 48
-    file.write((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
-    file.write((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
-    file.write((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.write((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
-    file.write((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
-    file.write((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
-    file.write((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
-    file.write((uint8_t *)&_prefs.telemetry_mode_base, sizeof(_prefs.telemetry_mode_base)); // 69
-    file.write((uint8_t *)&_prefs.telemetry_mode_loc, sizeof(_prefs.telemetry_mode_loc));   // 70
-    file.write((uint8_t *)&_prefs.telemetry_mode_env, sizeof(_prefs.telemetry_mode_env));   // 71
-    file.write((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));             // 72
-    file.write((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy));     // 76
-    file.write((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks));                   // 77
-    file.write((uint8_t *)&_prefs.path_hash_mode, sizeof(_prefs.path_hash_mode));           // 78
-    file.write(pad, 1);                                                                     // 79
-    file.write((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin));                         // 80
-    file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
-    file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
-    file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
-    file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
-    file.write((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops));       // 88
-    file.write((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain));         // 89
-    file.write((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name));    // 90
-    file.write((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key));     // 121
-    file.write((uint8_t *)&_prefs.radio_fem_rxgain, sizeof(_prefs.radio_fem_rxgain));      // 122
-
+    bool success = _prefs.saveSerial(file);
    file.close();
+    return success;
  }
+  return false;
 }

 void DataStore::loadContacts(DataStoreHost* host) {
@@ -19,7 +19,7 @@ class DataStore {
  mesh::RTCClock* _clock;
  IdentityStore identity_store;

-  void loadPrefsInt(const char *filename, NodePrefs& prefs, double& node_lat, double& node_lon);
+  void loadPrefsInt(const char *filename, NodePrefs& prefs);
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  void checkAdvBlobFile();
 #endif
@@ -33,8 +33,8 @@ public:
  FILESYSTEM* getSecondaryFS() const { return _fsExtra; }
  bool loadMainIdentity(mesh::LocalIdentity &identity);
  bool saveMainIdentity(const mesh::LocalIdentity &identity);
-  void loadPrefs(NodePrefs& prefs, double& node_lat, double& node_lon);
-  void savePrefs(const NodePrefs& prefs, double node_lat, double node_lon);
+  void loadPrefs(NodePrefs& prefs);
+  bool savePrefs(NodePrefs& prefs);
  void loadContacts(DataStoreHost* host);
  void saveContacts(DataStoreHost* host, bool (*filter)(const ContactInfo& c) = NULL);
  void loadChannels(DataStoreHost* host);
@@ -8,11 +8,11 @@
 #define FIRMWARE_VER_CODE 13

 #ifndef FIRMWARE_BUILD_DATE
-#define FIRMWARE_BUILD_DATE "6 Jun 2026"
+#define FIRMWARE_BUILD_DATE "14 Aug 2026"
 #endif

 #ifndef FIRMWARE_VERSION
-#define FIRMWARE_VERSION "v1.17.0"
+#define FIRMWARE_VERSION "v1.17.1"
 #endif

 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -26,12 +26,6 @@
 #include "DataStore.h"
 #include "NodePrefs.h"

-#if defined(WITH_MQTT_BRIDGE) && defined(ESP32_PLATFORM) && defined(WIFI_SSID)
-#include <helpers/CompanionMqttSetupPortal.h>
-#include <helpers/MQTTPrefs.h>
-#include <helpers/bridges/MQTTBridge.h>
-#endif
-
 #include <RTClib.h>
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/BaseSerialInterface.h>
@@ -101,13 +95,6 @@ public:
  NodePrefs *getNodePrefs();
  uint32_t getBLEPin();

-#if defined(WITH_MQTT_BRIDGE) && defined(ESP32_PLATFORM) && defined(WIFI_SSID)
-  void serviceMQTT(const char* wifi_ssid, const char* wifi_password,
-                   bool allow_setup_page);
-  void stopMQTTSetupPage();
-  bool isMQTTConfigured() const { return _mqtt_configured; }
-#endif
-
  void loop();
  void handleCmdFrame(size_t len);
  bool advert();
@@ -119,26 +106,18 @@ protected:
  float getAirtimeBudgetFactor() const override;
  int getInterferenceThreshold() const override;
  bool getCADEnabled() const override;
-#ifdef WITH_MQTT_BRIDGE
-  uint32_t getRadioWatchdogMillis() const override { return 0; }
-#endif
  int calcRxDelay(float score, uint32_t air_time) const override;
  uint32_t getRetransmitDelay(const mesh::Packet *packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet *packet) override;
-  uint8_t getDefaultTxCodingRate() const override { return _prefs.cr; }
  uint8_t getExtraAckTransmitCount() const override;
  bool filterRecvFloodPacket(mesh::Packet* packet) override;
  bool allowPacketForward(const mesh::Packet* packet) override;

-  bool sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis);
-  bool sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis=0) override;
-  bool sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis=0) override;
+  void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis);
+  void sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis=0) override;
+  void sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis=0) override;

  void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) override;
-#if defined(WITH_MQTT_BRIDGE) && defined(ESP32_PLATFORM) && defined(WIFI_SSID)
-  void logRx(mesh::Packet* packet, int len, float score) override;
-  void logTx(mesh::Packet* packet, int len) override;
-#endif
  bool isAutoAddEnabled() const override;
  bool shouldAutoAddContactType(uint8_t type) const override;
  bool shouldOverwriteWhenFull() const override;
@@ -186,8 +165,12 @@ protected:
  }

 public:
-  void savePrefs() { _store->savePrefs(_prefs, sensors.node_lat, sensors.node_lon); }
-  
+  void savePrefs() {
+    _prefs.node_lat = sensors.node_lat;
+    _prefs.node_lon = sensors.node_lon;
+    _store->savePrefs(_prefs);
+  }
+
 #if ENV_INCLUDE_GPS == 1
  void applyGpsPrefs() {
    sensors.setSettingValue("gps", _prefs.gps_enabled ? "1" : "0");
@@ -220,13 +203,6 @@ private:
  void checkCLIRescueCmd();
  void checkSerialInterface();
  bool isValidClientRepeatFreq(uint32_t f) const;
-  bool hasLocationTelemetryRecipient();
-  void updateGpsTelemetryPolicy();
-  mesh::RadioParamApplyResult tryApplyRadioParams(float freq, float bw, uint8_t sf, uint8_t cr);
-  bool applySavedRadioParams();
-  void finishRadioParamApply(float freq, float bw, uint8_t sf, uint8_t cr, uint8_t repeat);
-  void cancelPendingRadioParamApply();
-  void servicePendingRadioParamApply();

  // helpers, short-cuts
  void saveChannels() { _store->saveChannels(this); }
@@ -234,13 +210,6 @@ private:

  DataStore* _store;
  NodePrefs _prefs;
-#if defined(WITH_MQTT_BRIDGE) && defined(ESP32_PLATFORM) && defined(WIFI_SSID)
-  MQTTPrefs _mqtt_prefs;
-  MQTTBridge* _mqtt_bridge;
-  CompanionMqttSetupPortal _mqtt_setup;
-  bool _mqtt_configured;
-  bool _mqtt_started;
-#endif
  uint32_t pending_login;
  uint32_t pending_status;
  uint32_t pending_telemetry, pending_discovery;   // pending _TELEMETRY_REQ
@@ -254,16 +223,6 @@ private:
  uint32_t _active_ble_pin;
  bool _iter_started;
  bool _cli_rescue;
-  bool saved_radio_apply_pending;
-  unsigned long radio_apply_retry_at;
-  uint8_t radio_apply_failures;
-  bool command_radio_apply_pending;
-  float command_radio_freq;
-  float command_radio_bw;
-  uint8_t command_radio_sf;
-  uint8_t command_radio_cr;
-  uint8_t command_radio_repeat;
-  unsigned long command_radio_apply_deadline;
  bool send_unscoped;   // force un-scoped flood (instead of using send_scope)
  char cli_command[80];
  uint8_t app_target_ver;
@@ -288,21 +247,12 @@ private:

  struct AckTableEntry {
    unsigned long msg_sent;
-    unsigned long expires_at;
    uint32_t ack;
    ContactInfo* contact;
-    uint8_t text_fingerprint[MAX_HASH_SIZE];
-    uint8_t retry_key[MAX_HASH_SIZE];
  };
  #define EXPECTED_ACK_TABLE_SIZE 8
  AckTableEntry expected_ack_table[EXPECTED_ACK_TABLE_SIZE]; // circular table
  int next_ack_idx;
-  unsigned long next_ack_expiry;
-  bool has_next_ack_expiry;
-
-  void clearExpectedAck(AckTableEntry& entry, bool cancel_retries = true);
-  void expireExpectedAcks();
-  AckTableEntry* findPendingTextMessage(const uint8_t text_fingerprint[MAX_HASH_SIZE]);

  #define ADVERT_PATH_TABLE_SIZE   16
  AdvertPath advert_paths[ADVERT_PATH_TABLE_SIZE]; // circular table
@@ -1,5 +1,6 @@
 #pragma once
 #include <cstdint> // For uint8_t, uint32_t
+#include <helpers/ConfigSerializer.h>

 #define TELEM_MODE_DENY            0
 #define TELEM_MODE_ALLOW_FLAGS     1     // use contact.flags
@@ -8,31 +9,137 @@
 #define ADVERT_LOC_NONE       0
 #define ADVERT_LOC_SHARE      1

-struct NodePrefs {  // persisted to file
-  float airtime_factor;
+class NodePrefs : public ConfigSerializer {  // persisted to file
+public:
+  float airtime_factor = 0;
  char node_name[32];
-  float freq;
-  uint8_t sf;
-  uint8_t cr;
-  uint8_t multi_acks;
-  uint8_t manual_add_contacts;
-  float bw;
-  int8_t tx_power_dbm;
-  uint8_t telemetry_mode_base;
-  uint8_t telemetry_mode_loc;
-  uint8_t telemetry_mode_env;
-  float rx_delay_base;
-  uint32_t ble_pin;
-  uint8_t  advert_loc_policy;
-  uint8_t  buzzer_quiet;
-  uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
-  uint32_t gps_interval;     // GPS read interval in seconds
-  uint8_t autoadd_config;    // bitmask for auto-add contacts config
-  uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
-  uint8_t radio_fem_rxgain;  // LoRa FEM RX gain setting
-  uint8_t client_repeat;
-  uint8_t path_hash_mode;    // which path mode to use when sending
-  uint8_t autoadd_max_hops;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
+  double node_lat = 0, node_lon = 0;
+  float freq = 0;
+  uint8_t sf = 0;
+  uint8_t cr = 0;
+  uint8_t multi_acks = 0;
+  uint8_t manual_add_contacts = 0;
+  float bw = 0;
+  int8_t tx_power_dbm = 0;
+  uint8_t telemetry_mode_base = 0;
+  uint8_t telemetry_mode_loc = 0;
+  uint8_t telemetry_mode_env = 0;
+  float rx_delay_base = 0;
+  uint32_t ble_pin = 0;
+  uint8_t  advert_loc_policy = 0;
+  uint8_t  buzzer_quiet = 0;
+  uint8_t  vibe_quiet = 0;
+  uint8_t  gps_enabled = 0;      // GPS enabled flag (0=disabled, 1=enabled)
+  uint32_t gps_interval = 0;     // GPS read interval in seconds
+  uint8_t autoadd_config = 0;    // bitmask for auto-add contacts config
+  uint8_t rx_boosted_gain = 0; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
+  uint8_t radio_fem_rxgain = 0; // external LoRa FEM RX gain (LNA)
+  uint8_t radio_fem_txgain = 0; // external LoRa FEM TX gain (low by default)
+  uint8_t _client_repeat = 0;  // DEPRECATED -> use repeat.disable_fwd
+  uint8_t path_hash_mode = 0;    // which path mode to use when sending
+  uint8_t autoadd_max_hops = 0;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
  char default_scope_name[31];
  uint8_t default_scope_key[16];
+
+private:
+  class RadioPrefs : public ConfigSerializer {  // COPIED from CommonCLI (for now)
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("freq", _parent->freq);
+      def("bw", _parent->bw);
+      def("sf", _parent->sf);
+      def("cr", _parent->cr);
+      //def("cad", _parent->cad_enabled);
+      //def("int_thr", _parent->interference_threshold);
+      def("rxgain", _parent->rx_boosted_gain);
+    #if 0
+      // NOTE: these cannot be set (yet) so don't load/save until we can.
+      //       also, fem_rxgain WAS mapped to wrong JSON property previously
+      def("fem_rxgain", _parent->radio_fem_rxgain);
+      def("fem_txgain", _parent->radio_fem_txgain);
+    #endif
+      def("tx", _parent->tx_power_dbm);
+      def("af", _parent->airtime_factor);
+      def("rxdelay", _parent->rx_delay_base);
+      //def("f_txdelay", _parent->tx_delay_factor);   currently hard-coded
+      //def("d_txdelay", _parent->direct_tx_delay_factor);  currently hard-coded
+      //def("agc_int", _parent->agc_reset_interval);
+      def("hash_mode", _parent->path_hash_mode);
+      def("multi_ack", _parent->multi_acks);
+    }
+  public:
+    RadioPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  RadioPrefs radio;
+
+  class GPSPrefs : public ConfigSerializer {  // COPIED from CommonCLI (for now)
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("en", _parent->gps_enabled); // boolean
+      def("int", _parent->gps_interval);   // interval in seconds
+      def("adv_loc", _parent->advert_loc_policy);
+    }
+  public:
+    GPSPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  GPSPrefs gps;
+
+  class RepeatPrefs : public ConfigSerializer {  // COPIED from CommonCLI (for now)
+  public:
+    uint8_t disable_fwd = 1;
+  protected:
+    void structure() override {
+      def("disable", disable_fwd);
+      //def("f_max", flood_max);
+      //def("f_max_uns", flood_max_unscoped);
+      //def("f_max_adv", flood_max_advert);
+      //def("loop", loop_detect);
+    }
+  };
+  RepeatPrefs repeat;
+
+  class CompanionPrefs : public ConfigSerializer {
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("auto_max", _parent->autoadd_max_hops);  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
+      def("defs_nm", _parent->default_scope_name, sizeof(_parent->default_scope_name));
+      def("defs_key", (void *) _parent->default_scope_key, sizeof(_parent->default_scope_key));
+      def("pin", _parent->ble_pin);
+      def("buzz_q", _parent->buzzer_quiet);
+      def("vibe_q", _parent->vibe_quiet);
+      def("auto_add", _parent->autoadd_config);    // bitmask for auto-add contacts config
+      def("man_add", _parent->manual_add_contacts);
+      def("tel_base", _parent->telemetry_mode_base);
+      def("tel_loc", _parent->telemetry_mode_loc);
+      def("tel_env", _parent->telemetry_mode_env);
+    }
+  public:
+    CompanionPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  CompanionPrefs companion;
+
+protected:
+  void structure() override {
+    def("name", node_name, sizeof(node_name));
+    //def("adv_int", advert_interval);
+    //def("f_adv_int", flood_advert_interval);
+    def("lat", node_lat);
+    def("lon", node_lon);
+    def("radio", radio);
+    def("gps", gps);
+    def("repeat", repeat);
+    def("comp", companion);
+  }
+public:
+  NodePrefs() : radio(this), gps(this), companion(this) {
+    node_name[0] = 0;
+    default_scope_name[0] = 0;
+    memset(default_scope_key, 0, sizeof(default_scope_key));
+  }
+  // new accessor methods
+  bool isRepeatEn() const { return repeat.disable_fwd == 0; }
+  void setRepeatEn(bool en) { repeat.disable_fwd = en ? 0 : 1; }
 };
@@ -2,11 +2,6 @@
 #include <Mesh.h>
 #include "MyMesh.h"

-#ifdef ESP32_PLATFORM
-#include "esp_pm.h"
-#include "esp_bt.h"
-#endif
-
 // Believe it or not, this std C function is busted on some platforms!
 static uint32_t _atoi(const char* sp) {
  uint32_t n = 0;
@@ -17,19 +12,72 @@ static uint32_t _atoi(const char* sp) {
  return n;
 }

+// interface manager
+#include <helpers/MultiSerialInterface.h>
+MultiSerialInterface interface_manager;
+
+// include bluetooth interface
+#if defined(BLE_PIN_CODE)
+  #ifdef ESP32
+    // include esp32 bluetooth interface
+    #include <helpers/esp32/SerialBLEInterface.h>
+    SerialBLEInterface bluetooth_interface;
+  #elif defined(NRF52_PLATFORM)
+    // include nrf52 bluetooth interface
+    #include <helpers/nrf52/SerialBLEInterface.h>
+    SerialBLEInterface bluetooth_interface;
+  #else
+    #error "SerialBLEInterface is not defined for this platform"
+  #endif
+#endif
+
+// include wifi interface
+#ifdef WIFI_SSID
+  #ifndef TCP_PORT
+    #define TCP_PORT 5000
+  #endif
+  #ifdef ESP32
+    // include esp32 wifi interface
+    #include <helpers/esp32/SerialWifiInterface.h>
+    SerialWifiInterface wifi_interface;
+  #else
+    #error "SerialWifiInterface is not defined for this platform"
+  #endif
+#endif
+
+// include usb interface
+#if defined(ENABLE_USB_INTERFACE)
+  #include <helpers/ArduinoSerialInterface.h>
+  ArduinoSerialInterface usb_serial_interface;
+#endif
+
+// include ethernet interface
+#if defined(ETHERNET_ENABLED)
+  #include <helpers/ethernet/EthernetInterface.h>
+  ETHERNET_CLASS ethernet_interface;
+#endif
+
+// include hardware serial interface
+#if defined(SERIAL_RX)
+  #include <helpers/ArduinoSerialInterface.h>
+  ArduinoSerialInterface hardware_serial_interface;
+  HardwareSerial companion_serial(1);
+#endif
+
+// platform file system
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  #include <InternalFileSystem.h>
  #if defined(QSPIFLASH)
    #include <CustomLFS_QSPIFlash.h>
    DataStore store(InternalFS, QSPIFlash, rtc_clock);
  #else
-  #if defined(EXTRAFS)
-    #include <CustomLFS.h>
-    CustomLFS ExtraFS(0xD4000, 0x19000, 128);
-    DataStore store(InternalFS, ExtraFS, rtc_clock);
-  #else
-    DataStore store(InternalFS, rtc_clock);
-  #endif
+    #if defined(EXTRAFS)
+      #include <CustomLFS.h>
+      CustomLFS ExtraFS(0xD4000, 0x19000, 128);
+      DataStore store(InternalFS, ExtraFS, rtc_clock);
+    #else
+      DataStore store(InternalFS, rtc_clock);
+    #endif
  #endif
 #elif defined(RP2040_PLATFORM)
  #include <LittleFS.h>
@@ -39,65 +87,10 @@ static uint32_t _atoi(const char* sp) {
  DataStore store(SPIFFS, rtc_clock);
 #endif

-#ifdef ESP32
-  #ifdef WIFI_SSID
-    #include <helpers/esp32/SerialWifiInterface.h>
-    #include <helpers/WiFiSetupPortal.h>
-    SerialWifiInterface serial_interface;
-    #ifndef TCP_PORT
-      #define TCP_PORT 5000
-    #endif
-    #ifndef WIFI_PWD
-      #define WIFI_PWD ""
-    #endif
-  #elif defined(BLE_PIN_CODE)
-    #include <helpers/esp32/SerialBLEInterface.h>
-    SerialBLEInterface serial_interface;
-  #elif defined(SERIAL_RX)
-    #include <helpers/ArduinoSerialInterface.h>
-    ArduinoSerialInterface serial_interface;
-    HardwareSerial companion_serial(1);
-  #else
-    #include <helpers/ArduinoSerialInterface.h>
-    ArduinoSerialInterface serial_interface;
-  #endif
-#elif defined(RP2040_PLATFORM)
-  //#ifdef WIFI_SSID
-  //  #include <helpers/rp2040/SerialWifiInterface.h>
-  //  SerialWifiInterface serial_interface;
-  //  #ifndef TCP_PORT
-  //    #define TCP_PORT 5000
-  //  #endif
-  // #elif defined(BLE_PIN_CODE)
-  //   #include <helpers/rp2040/SerialBLEInterface.h>
-  //   SerialBLEInterface serial_interface;
-  #if defined(SERIAL_RX)
-    #include <helpers/ArduinoSerialInterface.h>
-    ArduinoSerialInterface serial_interface;
-    HardwareSerial companion_serial(1);
-  #else
-    #include <helpers/ArduinoSerialInterface.h>
-    ArduinoSerialInterface serial_interface;
-  #endif
-#elif defined(NRF52_PLATFORM)
-  #ifdef BLE_PIN_CODE
-    #include <helpers/nrf52/SerialBLEInterface.h>
-    SerialBLEInterface serial_interface;
-  #else
-    #include <helpers/ArduinoSerialInterface.h>
-    ArduinoSerialInterface serial_interface;
-  #endif
-#elif defined(STM32_PLATFORM)
-  #include <helpers/ArduinoSerialInterface.h>
-  ArduinoSerialInterface serial_interface;
-#else
-  #error "need to define a serial interface"
-#endif
-
 /* GLOBAL OBJECTS */
 #ifdef DISPLAY_CLASS
  #include "UITask.h"
-  UITask ui_task(&board, &serial_interface);
+  UITask ui_task(&board, &interface_manager);
 #endif

 StdRNG fast_rng;
@@ -116,164 +109,12 @@ void halt() {

 /* WIFI RECONNECT TRACKERS */
 #if defined(ESP32) && defined(WIFI_SSID)
-  static const unsigned long WIFI_SETUP_FALLBACK_MS = 120000UL;
-  static const char COMPANION_WIFI_SETUP_AP[] = "MeshCore-Setup";
  bool wifi_needs_reconnect = false;
  unsigned long last_wifi_reconnect_attempt = 0;
-  unsigned long wifi_disconnected_since = 0;
-  bool wifi_setup_recovery_mode = false;
-  static char configured_wifi_ssid[32];
-  static char configured_wifi_password[64];
-
-  #if defined(WITH_MQTT_BRIDGE) && defined(DISPLAY_CLASS)
-    static DisplayDriver* companion_setup_display = nullptr;
-    static unsigned long companion_setup_display_refresh = 0;
-
-    static void renderCompanionSetupDisplay() {
-      if (!companion_setup_display
-          || static_cast<int32_t>(millis() - companion_setup_display_refresh) < 0) return;
-      companion_setup_display_refresh = millis() + 1000;
-
-      companion_setup_display->turnOn();
-      companion_setup_display->startFrame();
-      companion_setup_display->setTextSize(1);
-      companion_setup_display->setColor(DisplayDriver::LIGHT);
-
-      if (WiFi.status() == WL_CONNECTED) {
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 0, "MQTT setup");
-        companion_setup_display->setCursor(0, 14);
-        companion_setup_display->print("Join WiFi:");
-        companion_setup_display->drawTextEllipsized(
-            0, 25, companion_setup_display->width(), configured_wifi_ssid);
-        companion_setup_display->setCursor(0, 39);
-        companion_setup_display->print("Open in browser:");
-        const String ip = WiFi.localIP().toString();
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 51, ip.c_str());
-      } else if (wifiSetupPortal().isActive()) {
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 0, "WiFi setup");
-        companion_setup_display->setCursor(0, 14);
-        companion_setup_display->print("Join open WiFi:");
-        companion_setup_display->drawTextEllipsized(
-            0, 25, companion_setup_display->width(), COMPANION_WIFI_SETUP_AP);
-        companion_setup_display->setCursor(0, 39);
-        companion_setup_display->print("Open in browser:");
-        const String ip = wifiSetupPortal().apIP().toString();
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 51, ip.c_str());
-      } else {
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 8, "WiFi connecting");
-        companion_setup_display->setCursor(0, 25);
-        companion_setup_display->print("SSID:");
-        companion_setup_display->drawTextEllipsized(
-            0, 38, companion_setup_display->width(), configured_wifi_ssid);
-        companion_setup_display->drawTextCentered(
-            companion_setup_display->width() / 2, 52, "Please wait...");
-      }
-      companion_setup_display->endFrame();
-    }
-  #endif
-
-  static bool saveCompanionWiFi(void*, const char* ssid, const char* password) {
-    if (!WiFiSetupPortal::saveStoredCredentials(ssid, password)) return false;
-    strncpy(configured_wifi_ssid, ssid, sizeof(configured_wifi_ssid) - 1);
-    configured_wifi_ssid[sizeof(configured_wifi_ssid) - 1] = '\0';
-    strncpy(configured_wifi_password, password ? password : "", sizeof(configured_wifi_password) - 1);
-    configured_wifi_password[sizeof(configured_wifi_password) - 1] = '\0';
-    return true;
-  }
-#endif
-
-/* WIFI OTA SEEDER — relay a host folder of .mota over WiFi (motatool `serve --tcp`), on a DEDICATED port
-   separate from the companion (TCP_PORT), so a phone app stays connected while motatool feeds updates. */
-#if defined(ESP32) && defined(WIFI_SSID) && defined(ENABLE_OTA)
-  #include <helpers/ota/OtaContext.h>
-  #include <helpers/ota/MotaSourceSerial.h>
-  #include <helpers/ota/FolderMotaStore.h>   // `ota pull <#> folder` destination over this same connection
-  #ifndef OTA_SEEDER_TCP_PORT
-    #define OTA_SEEDER_TCP_PORT 5001
-  #endif
-  static WiFiServer ota_seeder_server(OTA_SEEDER_TCP_PORT);
-  static WiFiClient ota_seeder_client;                                  // the live seeder connection (reused)
-  static mesh::ota::SerialMotaSource ota_seeder_source(ota_seeder_client, 3000);   // SERVE: read folder -> relay
-  static mesh::ota::FolderMotaStore  ota_folder_store(ota_seeder_client, 3000);    // PULL: capture .mota -> folder
-  static bool ota_seeder_attached = false;
-
-  // Accept one motatool connection at a time. While connected, the same link both SERVES the host folder
-  // over LoRa (register it as a source) and is offered as a `folder` PULL destination (`ota pull <#> folder`
-  // captures a fetched .mota back to that folder). Drop both the moment the connection closes.
-  static void ota_seeder_loop() {
-    if (ota_seeder_client && ota_seeder_client.connected()) return;     // still serving the current client
-    if (ota_seeder_attached) {                                          // previous client just disconnected
-      mesh::ota::ota_ctx().detach_folder();
-      mesh::ota::ota_ctx().clear_folder_dest();  // the `folder` pull destination is gone too
-      mesh::ota::ota_ctx().manager.announce();   // served set shrank back to our own fw -> re-advertise
-      ota_seeder_attached = false;
-      WIFI_DEBUG_PRINTLN("OTA seeder: client disconnected, relay stopped");
-    }
-    WiFiClient c = ota_seeder_server.available();
-    if (c) {
-      ota_seeder_client = c;                                            // rebind the persistent Stream to it
-      if (mesh::ota::ota_ctx().manager.add_source(&ota_seeder_source)) {
-        ota_seeder_attached = true;
-        char di[24]; snprintf(di, sizeof di, "tcp %s", ota_seeder_client.remoteIP().toString().c_str());
-        mesh::ota::ota_ctx().set_folder_dest(&ota_folder_store, di);   // offer `ota pull <#> folder`
-        // if a folder pull PAUSED when the link dropped, the host still holds the partial: rescan + resume
-        if (mesh::ota::ota_ctx().manager.fetchState() == mesh::ota::OtaManager::PAUSED)
-          mesh::ota::ota_ctx().manager.resumeStaged(nullptr);
-        mesh::ota::ota_ctx().manager.announce();   // new served set -> advertise the folder's fw to peers
-        WIFI_DEBUG_PRINTLN("OTA seeder: client connected (%s) — relay + folder pull-dest ready", di);
-      } else {
-        ota_seeder_client.stop();                                      // no free source slot
-      }
-    }
-  }
-#endif
-
-/* WIFI OTA CONSOLE — a tiny text CLI for OTA over WiFi. A WiFi companion has no serial text console, so
-   without this its OTA is only reachable through the phone app. Connect with e.g. `nc <ip> 5002` and type
-   `ota status` / `ota ls` / `ota announce` / ... — one client at a time, on a DEDICATED port separate from
-   the companion (5000) and the seeder (5001). */
-#if defined(ESP32) && defined(WIFI_SSID) && defined(ENABLE_OTA)
-  #include <helpers/ota/OtaCli.h>          // mesh::ota::handle_ota_command(line, reply, board)
-  #ifndef OTA_CONSOLE_TCP_PORT
-    #define OTA_CONSOLE_TCP_PORT 5002
-  #endif
-  static WiFiServer ota_console_server(OTA_CONSOLE_TCP_PORT);
-  static WiFiClient ota_console_client;
-  static char    ota_console_line[128];
-  static uint8_t  ota_console_len = 0;
-
-  static void ota_console_loop() {
-    if (!ota_console_client || !ota_console_client.connected()) {
-      WiFiClient c = ota_console_server.available();
-      if (c) { ota_console_client = c; ota_console_len = 0;
-               ota_console_client.print("OTA console — type `ota ...` (e.g. ota status / ota ls / ota announce)\r\n> "); }
-      return;
-    }
-    while (ota_console_client.available()) {
-      char ch = (char)ota_console_client.read();
-      if (ch == '\r' || ch == '\n') {
-        if (ota_console_len == 0) continue;                            // ignore blanks / the CRLF pair
-        ota_console_line[ota_console_len] = 0;
-        char reply[160]; reply[0] = 0;
-        if (!mesh::ota::handle_ota_command(ota_console_line, reply, board))
-          strcpy(reply, "only `ota ...` commands are supported on this console");
-        ota_console_client.print("  -> "); ota_console_client.print(reply); ota_console_client.print("\r\n> ");
-        ota_console_len = 0;
-      } else if (ota_console_len < sizeof(ota_console_line) - 1) {
-        ota_console_line[ota_console_len++] = ch;
-      }
-    }
-  }
 #endif

 void setup() {
  Serial.begin(115200);
-
  board.begin();

 #ifdef HAS_EXTERNAL_WATCHDOG
@@ -284,9 +125,6 @@ void setup() {
  DisplayDriver* disp = NULL;
  if (display.begin()) {
    disp = &display;
-  #if defined(ESP32) && defined(WIFI_SSID) && defined(WITH_MQTT_BRIDGE)
-    companion_setup_display = disp;
-  #endif
    disp->startFrame();
  #ifdef ST7789
    disp->setTextSize(2);
@@ -322,13 +160,6 @@ void setup() {
        false
    #endif
  );
-
-#ifdef BLE_PIN_CODE
-  serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
-#else
-  serial_interface.begin(Serial);
-#endif
-  the_mesh.startInterface(serial_interface);
 #elif defined(RP2040_PLATFORM)
  LittleFS.begin();
  store.begin();
@@ -339,22 +170,6 @@ void setup() {
        false
    #endif
  );
-
-  //#ifdef WIFI_SSID
-  //  WiFi.begin(WIFI_SSID, WIFI_PWD);
-  //  serial_interface.begin(TCP_PORT);
-  // #elif defined(BLE_PIN_CODE)
-  //   char dev_name[32+16];
-  //   sprintf(dev_name, "%s%s", BLE_NAME_PREFIX, the_mesh.getNodeName());
-  //   serial_interface.begin(dev_name, the_mesh.getBLEPin());
-  #if defined(SERIAL_RX)
-    companion_serial.setPins(SERIAL_RX, SERIAL_TX);
-    companion_serial.begin(115200);
-    serial_interface.begin(companion_serial);
-  #else
-    serial_interface.begin(Serial);
-  #endif
-    the_mesh.startInterface(serial_interface);
 #elif defined(ESP32)
  SPIFFS.begin(true);
  store.begin();
@@ -365,7 +180,17 @@ void setup() {
        false
    #endif
  );
+#else
+  #error "need to define filesystem"
+#endif

+// add bluetooth interface
+#if defined(BLE_PIN_CODE)
+  bluetooth_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
+  interface_manager.addInterface(InterfaceType::Bluetooth, &bluetooth_interface);
+#endif
+
+// add wifi interface
 #ifdef WIFI_SSID
  board.setInhibitSleep(true);   // prevent sleep when WiFi is active
  WiFi.setAutoReconnect(true);
@@ -374,60 +199,38 @@ void setup() {
      if (event == ARDUINO_EVENT_WIFI_STA_DISCONNECTED) {
          WIFI_DEBUG_PRINTLN("WiFi disconnected. Flagging for reconnect...");
          wifi_needs_reconnect = true;
-          if (wifi_disconnected_since == 0) {
-            wifi_disconnected_since = millis() ? millis() : 1;
-          }
      } else if (event == ARDUINO_EVENT_WIFI_STA_GOT_IP) {
-          WIFI_DEBUG_PRINTLN("connected! IP %s  (companion app on :%d)",
-                             WiFi.localIP().toString().c_str(), TCP_PORT);
+          WIFI_DEBUG_PRINTLN("WiFi connected successfully!");
          wifi_needs_reconnect = false;
-          wifi_disconnected_since = 0;
      }
  });

-  bool have_wifi = WiFiSetupPortal::loadStoredCredentials(
-      configured_wifi_ssid, sizeof(configured_wifi_ssid),
-      configured_wifi_password, sizeof(configured_wifi_password));
-  if (!have_wifi && !WiFiSetupPortal::isPlaceholderSSID(WIFI_SSID)) {
-    strncpy(configured_wifi_ssid, WIFI_SSID, sizeof(configured_wifi_ssid) - 1);
-    configured_wifi_ssid[sizeof(configured_wifi_ssid) - 1] = '\0';
-    strncpy(configured_wifi_password, WIFI_PWD, sizeof(configured_wifi_password) - 1);
-    configured_wifi_password[sizeof(configured_wifi_password) - 1] = '\0';
-    have_wifi = true;
-  }
+  WiFi.begin(WIFI_SSID, WIFI_PWD);
+  wifi_interface.begin(TCP_PORT);
+  interface_manager.addInterface(InterfaceType::WiFi, &wifi_interface);
+#endif

-  if (have_wifi) {
-    WiFi.mode(WIFI_STA);
-    wifi_disconnected_since = millis() ? millis() : 1;
-    WiFi.begin(configured_wifi_ssid, configured_wifi_password);
-  } else if (!wifiSetupPortal().begin(COMPANION_WIFI_SETUP_AP, saveCompanionWiFi, nullptr)) {
-    WIFI_DEBUG_PRINTLN("WiFi setup: could not start setup portal");
-  }
-  // Disable WiFi modem power-save: its periodic modem/light-sleep stalls the SX1262 SPI+DIO servicing,
-  // which makes the LoRa radio go deaf (no TX/RX) while WiFi is associated. Required for LoRa+WiFi to
-  // coexist on this ESP32 — the small extra idle current is well worth a working radio.
-  WiFi.setSleep(false);
-  serial_interface.begin(TCP_PORT);
-  #ifdef ENABLE_OTA
-    ota_seeder_server.begin();   // dedicated OTA seeder port for `motatool serve --tcp` (relay over LoRa)
-    WIFI_DEBUG_PRINTLN("OTA seeder listening on :%d  (motatool serve --tcp)", OTA_SEEDER_TCP_PORT);
-    ota_console_server.begin();  // dedicated OTA text-console port (`nc <ip> 5002` -> `ota ...`)
-    WIFI_DEBUG_PRINTLN("OTA console listening on :%d  (nc <ip> %d, type `ota ...`)", OTA_CONSOLE_TCP_PORT, OTA_CONSOLE_TCP_PORT);
-  #endif
-#elif defined(BLE_PIN_CODE)
-  serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
-#elif defined(SERIAL_RX)
+// add usb interface
+#if defined(ENABLE_USB_INTERFACE)
+  usb_serial_interface.begin(Serial);
+  interface_manager.addInterface(InterfaceType::USB, &usb_serial_interface);
+#endif
+
+// add ethernet interface
+#if defined(ETHERNET_ENABLED)
+  ethernet_interface.begin();
+  interface_manager.addInterface(InterfaceType::Ethernet, &ethernet_interface);
+#endif
+
+// add hardware serial interface
+#if defined(SERIAL_RX)
  companion_serial.setPins(SERIAL_RX, SERIAL_TX);
  companion_serial.begin(115200);
-  serial_interface.begin(companion_serial);
-#else
-  serial_interface.begin(Serial);
-#endif
-  the_mesh.startInterface(serial_interface);
-#else
-  #error "need to define filesystem"
+  hardware_serial_interface.begin(companion_serial);
+  interface_manager.addInterface(InterfaceType::HardwareSerial, &hardware_serial_interface);
 #endif

+  the_mesh.startInterface(interface_manager);
  sensors.begin();

 #if ENV_INCLUDE_GPS == 1
@@ -439,108 +242,33 @@ void setup() {
 #endif

  board.onBootComplete();
-
-#ifdef ESP32_PLATFORM
-#if !CONFIG_IDF_TARGET_ESP32C6
-  // Enable BLE sleep
-  esp_err_t errBLESleep = esp_bt_sleep_enable();
-  if (errBLESleep == ESP_OK) {
-    Serial.println("Bluetooth sleep enabled successfully");
-  } else {
-    Serial.printf("Bluetooth sleep enable failed: %s\n", esp_err_to_name(errBLESleep));
-  }
-#endif
-
-#if CONFIG_IDF_TARGET_ESP32C3
-  esp_pm_config_esp32c3_t pm_config;
-#elif CONFIG_IDF_TARGET_ESP32S3
-  esp_pm_config_esp32s3_t pm_config;
-#elif CONFIG_IDF_TARGET_ESP32
-  esp_pm_config_esp32_t pm_config;
-#elif CONFIG_IDF_TARGET_ESP32C6
-  esp_pm_config_t pm_config;
-#endif
-
-  // Configure Power Management
-  pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = true };
-  esp_err_t errPM = esp_pm_configure(&pm_config);
-  if (errPM == ESP_OK) {
-    Serial.println("Power Management configured successfully");
-  } else {
-    Serial.printf("Power Management failed to configure: %d\r\n", errPM);
-  }
-#endif
 }

 void loop() {
  the_mesh.loop();
+  interface_manager.loop();
  sensors.loop();
 #ifdef DISPLAY_CLASS
-  #if defined(ESP32) && defined(WIFI_SSID) && defined(WITH_MQTT_BRIDGE)
-  if (the_mesh.isMQTTConfigured()) {
-    ui_task.loop();
-  } else {
-    renderCompanionSetupDisplay();
-  }
-  #else
  ui_task.loop();
-  #endif
 #endif
  rtc_clock.tick();
 #ifdef HAS_EXTERNAL_WATCHDOG
  external_watchdog.loop();
 #endif
-  
+
  if (!the_mesh.hasPendingWork()) {
 #if defined(NRF52_PLATFORM)
    board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
-#elif defined(ESP32_PLATFORM)
-    if (!serial_interface.isReadBusy() && !serial_interface.isWriteBusy()) { // BLE is not busy
-      vTaskDelay(pdMS_TO_TICKS(10));  // attempt to sleep
-    }
 #endif
  }

 #if defined(ESP32) && defined(WIFI_SSID)
-  #ifdef ENABLE_OTA
-    ota_seeder_loop();   // accept/drop a motatool `serve --tcp` connection on the dedicated seeder port
-    ota_console_loop();  // service the OTA text console (port 5002)
-  #endif
-  if (WiFi.status() == WL_CONNECTED) {
-    wifi_disconnected_since = 0;
-    if (wifi_setup_recovery_mode && !wifiSetupPortal().isActive()) {
-      wifi_setup_recovery_mode = false;
-    }
-  } else if (configured_wifi_ssid[0]) {
-    unsigned long now = millis();
-    if (wifi_disconnected_since == 0) wifi_disconnected_since = now ? now : 1;
-    if (!wifi_setup_recovery_mode && !wifiSetupPortal().isActive()
-        && now - wifi_disconnected_since >= WIFI_SETUP_FALLBACK_MS) {
-#ifdef WITH_MQTT_BRIDGE
-      the_mesh.stopMQTTSetupPage();
-#endif
-      if (wifiSetupPortal().begin(COMPANION_WIFI_SETUP_AP, saveCompanionWiFi, nullptr)) {
-        wifiSetupPortal().configureRecovery(
-            configured_wifi_ssid, configured_wifi_password, WIFI_SETUP_FALLBACK_MS);
-        wifi_setup_recovery_mode = true;
-        WIFI_DEBUG_PRINTLN("WiFi unavailable for two minutes; setup AP started");
-      } else {
-        // Avoid retrying portal creation on every pass through loop().
-        wifi_disconnected_since = now;
-      }
-    }
-  }
  // Safely attempt to reconnect every 10 seconds if flagged
-  if (!wifiSetupPortal().isActive() && wifi_needs_reconnect
-      && (millis() - last_wifi_reconnect_attempt > 10000)) {
+  if (wifi_needs_reconnect && (millis() - last_wifi_reconnect_attempt > 10000)) {
    WIFI_DEBUG_PRINTLN("Attempting manual WiFi reconnect...");
    WiFi.disconnect();
    WiFi.reconnect();
    last_wifi_reconnect_attempt = millis();
  }
-#ifdef WITH_MQTT_BRIDGE
-  the_mesh.serviceMQTT(configured_wifi_ssid, configured_wifi_password,
-                       !wifiSetupPortal().isActive());
-#endif
 #endif
 }
@@ -53,23 +53,24 @@ public:

  int render(DisplayDriver& display) override {
    // meshcore logo
-    display.setColor(DisplayDriver::BLUE);
+    display.setColor(UIColor::corp_blue);
    int logoWidth = 128;
    display.drawXbm((display.width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);

    // meshcore website
    const char* website = "https://meshcore.io";
-    display.setColor(DisplayDriver::LIGHT);
+    display.setColor(UIColor::primary_txt);
    display.setTextSize(1);
    uint16_t websiteWidth = display.getTextWidth(website);
    display.setCursor((display.width() - websiteWidth) / 2, 22);
    display.print(website);

    // version info
-    display.setColor(DisplayDriver::LIGHT);
+    display.setColor(UIColor::primary_txt);
    display.setTextSize(1);
    display.drawTextCentered(display.width()/2, 35, _version_info);

+    display.setColor(UIColor::secondary_txt);
    display.setTextSize(1);
    display.drawTextCentered(display.width()/2, 48, FIRMWARE_BUILD_DATE);

@@ -128,7 +129,7 @@ class HomeScreen : public UIScreen {
    int iconHeight = 10;
    int iconX = display.width() - iconWidth - 5; // Position the icon near the top-right corner
    int iconY = 0;
-    display.setColor(DisplayDriver::GREEN);
+    display.setColor(UIColor::title_txt);

    // battery outline
    display.drawRect(iconX, iconY, iconWidth, iconHeight);
@@ -143,7 +144,7 @@ class HomeScreen : public UIScreen {
    // show muted icon if buzzer is muted
 #ifdef PIN_BUZZER
    if (_task->isBuzzerQuiet()) {
-      display.setColor(DisplayDriver::RED);
+      display.setColor(UIColor::warning_txt);
      display.drawXbm(iconX - 9, iconY + 1, muted_icon, 8, 8);
    }
 #endif
@@ -188,34 +189,41 @@ public:
  }

  int render(DisplayDriver& display) override {
+    display.setColor(UIColor::title_bkg);
+    display.fillRect(0, 0, display.width(), 12);
    char tmp[80];
    // node name
    display.setTextSize(1);
-    display.setColor(DisplayDriver::GREEN);
+    display.setColor(UIColor::title_txt);
    char filtered_name[sizeof(_node_prefs->node_name)];
    display.translateUTF8ToBlocks(filtered_name, _node_prefs->node_name, sizeof(filtered_name));
-    display.setCursor(0, 0);
+    display.setCursor(0, 2);
    display.print(filtered_name);

    // battery voltage
    renderBatteryIndicator(display, _task->getBattMilliVolts());

    // curr page indicator
+    if (UIColor::title_bkg == UIColor::window_bkg) {
+      display.setColor(UIColor::title_txt);
+    } else {
+      display.setColor(UIColor::title_bkg);
+    }
    int y = 14;
    int x = display.width() / 2 - 5 * (HomePage::Count-1);
    for (uint8_t i = 0; i < HomePage::Count; i++, x += 10) {
      if (i == _page) {
-        display.fillRect(x-1, y-1, 3, 3);
+        display.fillRect(x-1, y-1, 4, 4);
      } else {
-        display.fillRect(x, y, 1, 1);
+        display.fillRect(x, y, 2, 2);
      }
    }

    if (_page == HomePage::FIRST) {
-      display.setColor(DisplayDriver::YELLOW);
+      display.setColor(UIColor::primary_txt);
      display.setTextSize(2);
      sprintf(tmp, "MSG: %d", _task->getMsgCount());
-      display.drawTextCentered(display.width() / 2, 20, tmp);
+      display.drawTextCentered(display.width() / 2, 22, tmp);

      #ifdef WIFI_SSID
        IPAddress ip = WiFi.localIP();
@@ -224,19 +232,19 @@ public:
        display.drawTextCentered(display.width() / 2, 54, tmp);
      #endif
      if (_task->hasConnection()) {
-        display.setColor(DisplayDriver::GREEN);
+        display.setColor(UIColor::warning_txt);
        display.setTextSize(1);
        display.drawTextCentered(display.width() / 2, 43, "< Connected >");

      } else if (the_mesh.getBLEPin() != 0) { // BT pin
-        display.setColor(DisplayDriver::RED);
+        display.setColor(UIColor::warning_txt);
        display.setTextSize(2);
        sprintf(tmp, "Pin:%d", the_mesh.getBLEPin());
        display.drawTextCentered(display.width() / 2, 43, tmp);
      }
    } else if (_page == HomePage::RECENT) {
      the_mesh.getRecentlyHeard(recent, UI_RECENT_LIST_SIZE);
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::primary_txt);
      int y = 20;
      for (int i = 0; i < UI_RECENT_LIST_SIZE; i++, y += 11) {
        auto a = &recent[i];
@@ -260,7 +268,7 @@ public:
        display.print(tmp);
      }
    } else if (_page == HomePage::RADIO) {
-      display.setColor(DisplayDriver::YELLOW);
+      display.setColor(UIColor::primary_txt);
      display.setTextSize(1);
      // freq / sf
      display.setCursor(0, 20);
@@ -279,15 +287,17 @@ public:
      sprintf(tmp, "Noise floor: %d", radio_driver.getNoiseFloor());
      display.print(tmp);
    } else if (_page == HomePage::BLUETOOTH) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::corp_blue);
      display.drawXbm((display.width() - 32) / 2, 18,
-          _task->isSerialEnabled() ? bluetooth_on : bluetooth_off,
+          _task->isBluetoothEnabled() ? bluetooth_on : bluetooth_off,
          32, 32);
+      display.setColor(UIColor::secondary_txt);
      display.setTextSize(1);
      display.drawTextCentered(display.width() / 2, 64 - 11, "toggle: " PRESS_LABEL);
    } else if (_page == HomePage::ADVERT) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::corp_blue);
      display.drawXbm((display.width() - 32) / 2, 18, advert_icon, 32, 32);
+      display.setColor(UIColor::secondary_txt);
      display.drawTextCentered(display.width() / 2, 64 - 11, "advert: " PRESS_LABEL);
 #if ENV_INCLUDE_GPS == 1
    } else if (_page == HomePage::GPS) {
@@ -305,24 +315,33 @@ public:
 #else
      strcpy(buf, gps_state ? "gps on" : "gps off");
 #endif
+      display.setColor(UIColor::primary_txt);
      display.drawTextLeftAlign(0, y, buf);
      if (nmea == NULL) {
        y = y + 12;
+        display.setColor(UIColor::secondary_txt);
        display.drawTextLeftAlign(0, y, "Can't access GPS");
      } else {
+        display.setColor(UIColor::primary_txt);
        strcpy(buf, nmea->isValid()?"fix":"no fix");
        display.drawTextRightAlign(display.width()-1, y, buf);
        y = y + 12;
+        display.setColor(UIColor::secondary_txt);
        display.drawTextLeftAlign(0, y, "sat");
+        display.setColor(UIColor::primary_txt);
        sprintf(buf, "%d", nmea->satellitesCount());
        display.drawTextRightAlign(display.width()-1, y, buf);
        y = y + 12;
+        display.setColor(UIColor::secondary_txt);
        display.drawTextLeftAlign(0, y, "pos");
+        display.setColor(UIColor::primary_txt);
        sprintf(buf, "%.4f %.4f",
          nmea->getLatitude()/1000000., nmea->getLongitude()/1000000.);
        display.drawTextRightAlign(display.width()-1, y, buf);
        y = y + 12;
+        display.setColor(UIColor::secondary_txt);
        display.drawTextLeftAlign(0, y, "alt");
+        display.setColor(UIColor::primary_txt);
        sprintf(buf, "%.2f", nmea->getAltitude()/1000.);
        display.drawTextRightAlign(display.width()-1, y, buf);
        y = y + 12;
@@ -390,7 +409,9 @@ public:
            strcpy(name, "unk"); sprintf(buf, "");
        }
        display.setCursor(0, y);
+        display.setColor(UIColor::secondary_txt);
        display.print(name);
+        display.setColor(UIColor::primary_txt);
        display.setCursor(
          display.width()-display.getTextWidth(buf)-1, y
        );
@@ -401,11 +422,13 @@ public:
      else sensors_scroll_offset = 0;
 #endif
    } else if (_page == HomePage::SHUTDOWN) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::corp_blue);
      display.setTextSize(1);
      if (_shutdown_init) {
+        display.setColor(UIColor::warning_txt);
        display.drawTextCentered(display.width() / 2, 34, "hibernating...");
      } else {
+        display.setColor(UIColor::secondary_txt);
        display.drawXbm((display.width() - 32) / 2, 18, power_icon, 32, 32);
        display.drawTextCentered(display.width() / 2, 64 - 11, "hibernate:" PRESS_LABEL);
      }
@@ -426,10 +449,10 @@ public:
      return true;
    }
    if (c == KEY_ENTER && _page == HomePage::BLUETOOTH) {
-      if (_task->isSerialEnabled()) {  // toggle Bluetooth on/off
-        _task->disableSerial();
+      if (_task->isBluetoothEnabled()) {  // toggle Bluetooth on/off
+        _task->disableBluetooth();
      } else {
-        _task->enableSerial();
+        _task->enableBluetooth();
      }
      return true;
    }
@@ -498,7 +521,7 @@ public:
    char tmp[16];
    display.setCursor(0, 0);
    display.setTextSize(1);
-    display.setColor(DisplayDriver::GREEN);
+    display.setColor(UIColor::corp_blue);
    sprintf(tmp, "Unread: %d", num_unread);
    display.print(tmp);

@@ -518,13 +541,13 @@ public:
    display.drawRect(0, 11, display.width(), 1);  // horiz line

    display.setCursor(0, 14);
-    display.setColor(DisplayDriver::YELLOW);
+    display.setColor(UIColor::secondary_txt);
    char filtered_origin[sizeof(p->origin)];
    display.translateUTF8ToBlocks(filtered_origin, p->origin, sizeof(filtered_origin));
    display.print(filtered_origin);

    display.setCursor(0, 25);
-    display.setColor(DisplayDriver::LIGHT);
+    display.setColor(UIColor::primary_txt);
    char filtered_msg[sizeof(p->msg)];
    display.translateUTF8ToBlocks(filtered_msg, p->msg, sizeof(filtered_msg));
    display.printWordWrap(filtered_msg, display.width());
@@ -697,9 +720,6 @@ void UITask::shutdown(bool restart){
  if (restart) {
    _board->reboot();
  } else {
-    // still necessary until all boards are refactored to use poweroff
-    _display->turnOff();
-    radio_driver.powerOff();
    // Power off board including radio, display, GPS and components
    _board->powerOff();
  }
@@ -750,6 +770,16 @@ void UITask::loop() {
    c = handleTripleClick(KEY_SELECT);
  }
 #endif
+#if defined(UI_HAS_ROTARY_INPUT)
+  RotaryInputEvent rotaryEv = rotary_input.poll();
+  if (c == 0 && _display != NULL && _display->isOn()) {
+    if (rotaryEv == RotaryInputEvent::Next) {
+      c = KEY_NEXT;
+    } else if (rotaryEv == RotaryInputEvent::Prev) {
+      c = KEY_PREV;
+    }
+  }
+#endif
 #if defined(PIN_USER_BTN_ANA)
  if (abs(millis() - _analogue_pin_read_millis) > 10) {
    int ev = analog_btn.check();
@@ -799,9 +829,9 @@ void UITask::loop() {
        _display->setTextSize(1);
        int y = _display->height() / 3;
        int p = _display->height() / 32;
-        _display->setColor(DisplayDriver::DARK);
+        _display->setColor(UIColor::popup_bkg);
        _display->fillRect(p, y, _display->width() - p*2, y);
-        _display->setColor(DisplayDriver::LIGHT);  // draw box border
+        _display->setColor(UIColor::popup_txt);  // draw box border
        _display->drawRect(p, y, _display->width() - p*2, y);
        _display->drawTextCentered(_display->width() / 2, y + p*3, _alert);
        _next_refresh = _alert_expiry;   // will need refresh when alert is dismissed
@@ -838,7 +868,7 @@ void UITask::loop() {
        if (_display != NULL) {
          _display->startFrame();
          _display->setTextSize(2);
-          _display->setColor(DisplayDriver::RED);
+          _display->setColor(UIColor::warning_txt);
          _display->drawTextCentered(_display->width() / 2, 20, "Low Battery.");
          _display->drawTextCentered(_display->width() / 2, 40, "Shutting Down!");
          _display->endFrame();
@@ -4,7 +4,7 @@
 #include <helpers/ui/DisplayDriver.h>
 #include <helpers/ui/UIScreen.h>
 #include <helpers/SensorManager.h>
-#include <helpers/BaseSerialInterface.h>
+#include <helpers/MultiSerialInterface.h>
 #include <Arduino.h>
 #include <helpers/sensors/LPPDataHelpers.h>

@@ -65,7 +65,7 @@ class UITask : public AbstractUITask {

 public:

-  UITask(mesh::MainBoard* board, BaseSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
+  UITask(mesh::MainBoard* board, MultiSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
    next_batt_chck = _next_refresh = 0;
    ui_started_at = 0;
    curr = NULL;
@@ -6,12 +6,19 @@
 #define AUTO_OFF_MILLIS     15000   // 15 seconds
 #define BOOT_SCREEN_MILLIS   3000   // 3 seconds

-#ifdef PIN_STATUS_LED
+#if defined(PIN_STATUS_LED) || defined(PIN_STATUS_LED_R)
 #define LED_ON_MILLIS     20
 #define LED_ON_MSG_MILLIS 200
 #define LED_CYCLE_MILLIS  4000
 #endif

+#if defined(PIN_STATUS_LED_R) && defined(PIN_STATUS_LED_G) && defined(PIN_STATUS_LED_B)
+#define STATUS_LED_RGB 1
+#ifndef LOW_BATT_MILLIVOLTS
+#define LOW_BATT_MILLIVOLTS 3500
+#endif
+#endif
+
 #ifndef USER_BTN_PRESSED
 #define USER_BTN_PRESSED LOW
 #endif
@@ -60,6 +67,11 @@ void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* no
  buzzer.startup();
 #endif

+#ifdef HAS_DRV2605
+  vibration.begin();
+  vibration.quiet(_node_prefs->vibe_quiet);
+#endif
+
  // Initialize digital button if available
 #ifdef PIN_USER_BTN
  _userButton = new Button(PIN_USER_BTN, USER_BTN_PRESSED);
@@ -130,6 +142,10 @@ void UITask::clearMsgPreview() {
 void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) {
  _msgcount = msgcount;

+#ifdef HAS_DRV2605
+  vibration.trigger();   // vibrate even while the app is connected (honors quiet + cooldown)
+#endif
+
  if (path_len == 0xFF) {
    sprintf(_origin, "(F) %s", from_name);
  } else {
@@ -167,7 +183,7 @@ void UITask::renderBatteryIndicator(uint16_t batteryMilliVolts) {
  int iconHeight = 12;
  int iconX = _display->width() - iconWidth - 5; // Position the icon near the top-right corner
  int iconY = 0;
-  _display->setColor(DisplayDriver::GREEN);
+  _display->setColor(UIColor::primary_txt);

  // battery outline
  _display->drawRect(iconX, iconY, iconWidth, iconHeight);
@@ -188,7 +204,7 @@ void UITask::renderCurrScreen() {
    _display->setTextSize(1.4);
    uint16_t textWidth = _display->getTextWidth(_alert);
    _display->setCursor((_display->width() - textWidth) / 2, 22);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::warning_txt);
    _display->print(_alert);
    _alert[0] = 0;
    _need_refresh = true;
@@ -197,30 +213,29 @@ void UITask::renderCurrScreen() {
    // render message preview
    _display->setCursor(0, 0);
    _display->setTextSize(1);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::primary_txt);
    _display->print(_node_prefs->node_name);

    _display->setCursor(0, 12);
-    _display->setColor(DisplayDriver::YELLOW);
+    _display->setColor(UIColor::secondary_txt);
    _display->print(_origin);
    _display->setCursor(0, 24);
-    _display->setColor(DisplayDriver::LIGHT);
    _display->print(_msg);

    _display->setCursor(_display->width() - 28, 9);
    _display->setTextSize(2);
-    _display->setColor(DisplayDriver::ORANGE);
+    _display->setColor(UIColor::primary_txt);
    sprintf(tmp, "%d", _msgcount);
    _display->print(tmp);
-    _display->setColor(DisplayDriver::YELLOW); // last color will be kept on T114
+    _display->setColor(UIColor::secondary_txt); // last color will be kept on T114
  } else if ((millis() - ui_started_at) < BOOT_SCREEN_MILLIS) { // boot screen
    // meshcore logo
-    _display->setColor(DisplayDriver::BLUE);
+    _display->setColor(UIColor::corp_blue);
    int logoWidth = 128;
    _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);

    // version info
-    _display->setColor(DisplayDriver::LIGHT);
+    _display->setColor(UIColor::primary_txt);
    _display->setTextSize(1);
    uint16_t textWidth = _display->getTextWidth(_version_info);
    _display->setCursor((_display->width() - textWidth) / 2, 22);
@@ -229,7 +244,7 @@ void UITask::renderCurrScreen() {
    // node name
    _display->setCursor(0, 0);
    _display->setTextSize(1);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::primary_txt);
    _display->print(_node_prefs->node_name);

    // battery voltage
@@ -237,7 +252,7 @@ void UITask::renderCurrScreen() {

    // freq / sf
    _display->setCursor(0, 20);
-    _display->setColor(DisplayDriver::YELLOW);
+    _display->setColor(UIColor::secondary_txt);
    sprintf(tmp, "FREQ: %06.3f SF%d", _node_prefs->freq, _node_prefs->sf);
    _display->print(tmp);

@@ -248,21 +263,127 @@ void UITask::renderCurrScreen() {

    // BT pin
    if (!_connected && the_mesh.getBLEPin() != 0) {
-      _display->setColor(DisplayDriver::RED);
+      _display->setColor(UIColor::warning_txt);
      _display->setTextSize(2);
      _display->setCursor(0, 43);
      sprintf(tmp, "Pin:%d", the_mesh.getBLEPin());
      _display->print(tmp);
-      _display->setColor(DisplayDriver::GREEN);
+      _display->setColor(UIColor::primary_txt);
    } else {
-      _display->setColor(DisplayDriver::LIGHT); 
+      _display->setColor(UIColor::primary_txt); 
    }
  }
  _need_refresh = false;
 }

+#ifdef STATUS_LED_RGB
+static void statusLedWrite(uint8_t r, uint8_t g, uint8_t b) {
+  analogWrite(PIN_STATUS_LED_R, r);
+  analogWrite(PIN_STATUS_LED_G, g);
+  analogWrite(PIN_STATUS_LED_B, b);
+}
+
+static void statusLedWheel(uint8_t pos) {   // smooth hue sweep, 0..255
+  if (pos < 85) {
+    statusLedWrite(255 - pos * 3, pos * 3, 0);
+  } else if (pos < 170) {
+    pos -= 85;
+    statusLedWrite(0, 255 - pos * 3, pos * 3);
+  } else {
+    pos -= 170;
+    statusLedWrite(pos * 3, 0, 255 - pos * 3);
+  }
+}
+#endif
+
 void UITask::userLedHandler() {
-#ifdef PIN_STATUS_LED
+#ifdef STATUS_LED_RGB
+  static bool booted = false;
+  static bool flourish_active = false;
+  static unsigned long flourish_until = 0;
+  static int prev_msgcount = 0;
+  static int state = 0;
+  static unsigned long next_change = 0;
+  static int last_increment = 0;
+  static unsigned long next_batt_check = 0;
+  static bool low_batt = false;
+
+  unsigned long cur_time = millis();
+
+  if (!booted) {   // color sweep on boot
+    booted = true;
+    flourish_until = cur_time + 1200;
+    flourish_active = true;
+  }
+  if (_msgcount > prev_msgcount) {   // color sweep when a new message arrives
+    flourish_until = cur_time + 800;
+    flourish_active = true;
+  }
+  prev_msgcount = _msgcount;
+
+  if (flourish_active) {
+    if (cur_time < flourish_until) {
+      statusLedWheel((cur_time % 1200) * 255 / 1200);
+      return;
+    }
+    statusLedWrite(0, 0, 0);
+    flourish_active = false;
+    state = 0;
+    next_change = cur_time;
+  }
+
+  if (cur_time > next_batt_check) {   // battery reads are not free, keep them rare
+    low_batt = _board->getBattMilliVolts() < LOW_BATT_MILLIVOLTS;
+    next_batt_check = cur_time + 60000;
+  }
+
+#ifdef EXT_CHRG_DETECT
+  // charge status display while docked (skipped when messages are waiting,
+  // so the unread indication is never masked)
+  static unsigned long next_pwr_check = 0;
+  static bool ext_powered = false, ext_charging = false;
+  if (cur_time > next_pwr_check) {
+    ext_powered = _board->isExternalPowered();
+    ext_charging = ext_powered && digitalRead(EXT_CHRG_DETECT) == LOW;
+    next_pwr_check = cur_time + 1000;
+  }
+  if (ext_powered && _msgcount == 0) {
+    if (ext_charging) {
+      // amber breathing while charging
+      int ph = cur_time % 2000;
+      int v = ph < 1000 ? ph : 2000 - ph;
+      uint8_t lvl = (uint8_t)(v * 255 / 1000);
+      statusLedWrite(lvl, (uint8_t)(lvl * 35 / 100), 0);
+    } else {
+      statusLedWrite(0, 40, 0);   // dim solid green: charge complete
+    }
+    state = 0;
+    next_change = cur_time;
+    return;
+  }
+#endif
+
+  if (cur_time > next_change) {
+    if (state == 0) {
+      state = 1;
+      last_increment = (_msgcount > 0) ? LED_ON_MSG_MILLIS : LED_ON_MILLIS;
+      next_change = cur_time + last_increment;
+      if (low_batt) {
+        statusLedWrite(255, 0, 0);      // red: battery low
+      } else if (_msgcount > 0) {
+        statusLedWrite(255, 90, 0);     // amber: unread messages
+      } else if (_connected) {
+        statusLedWrite(0, 0, 255);      // blue: app connected
+      } else {
+        statusLedWrite(0, 255, 0);      // green: heartbeat
+      }
+    } else {
+      state = 0;
+      next_change = cur_time + LED_CYCLE_MILLIS - last_increment;
+      statusLedWrite(0, 0, 0);
+    }
+  }
+#elif defined(PIN_STATUS_LED)
  static int state = 0;
  static int next_change = 0;
  static int last_increment = 0;
@@ -307,8 +428,6 @@ void UITask::shutdown(bool restart){
  if (restart) {
    _board->reboot();
  } else {
-    _display->turnOff();
-    radio_driver.powerOff();
    // Power off board including radio, display, GPS and components
    _board->powerOff();
  }
@@ -409,8 +528,26 @@ void UITask::handleButtonDoublePress() {

 void UITask::handleButtonTriplePress() {
  MESH_DEBUG_PRINTLN("UITask: triple press triggered");
-  // Toggle buzzer quiet mode
-  #ifdef PIN_BUZZER
+#if defined(PIN_BUZZER) && defined(HAS_DRV2605)
+  // cycle alert modes: Buzz+Vibe -> Buzz only -> Vibe only -> Silent
+  int mode = (_node_prefs->buzzer_quiet ? 2 : 0) | (_node_prefs->vibe_quiet ? 1 : 0);
+  mode = (mode + 1) & 3;
+  _node_prefs->buzzer_quiet = (mode & 2) ? 1 : 0;
+  _node_prefs->vibe_quiet = (mode & 1) ? 1 : 0;
+  buzzer.quiet(_node_prefs->buzzer_quiet);
+  vibration.quiet(_node_prefs->vibe_quiet);
+  // audible/tactile confirmation of the new mode (no screen on some boards)
+  if (!_node_prefs->buzzer_quiet) notify(UIEventType::ack);
+  if (!_node_prefs->vibe_quiet) vibration.trigger(true);
+  switch (mode) {
+    case 0: sprintf(_alert, "Alerts: Buzz+Vibe"); break;
+    case 1: sprintf(_alert, "Alerts: Buzz only"); break;
+    case 2: sprintf(_alert, "Alerts: Vibe only"); break;
+    default: sprintf(_alert, "Alerts: Silent"); break;
+  }
+  the_mesh.savePrefs();
+  _need_refresh = true;
+#elif defined(PIN_BUZZER)
    if (buzzer.isQuiet()) {
      buzzer.quiet(false);
      notify(UIEventType::ack);
@@ -422,7 +559,7 @@ void UITask::handleButtonTriplePress() {
    _node_prefs->buzzer_quiet = buzzer.isQuiet();
    the_mesh.savePrefs();
    _need_refresh = true;
-  #endif
+#endif
 }

 void UITask::handleButtonQuadruplePress() {
@@ -455,4 +592,4 @@ void UITask::handleButtonLongPress() {
  } else {
    shutdown();
  }
-}
+}
@@ -14,11 +14,18 @@

 #include "Button.h"

+#ifdef HAS_DRV2605
+  #include <helpers/ui/DRV2605Vibration.h>
+#endif
+
 class UITask : public AbstractUITask {
  DisplayDriver* _display;
  SensorManager* _sensors;
 #ifdef PIN_BUZZER
  genericBuzzer buzzer;
+#endif
+#ifdef HAS_DRV2605
+  DRV2605Vibration vibration;
 #endif
  unsigned long _next_refresh, _auto_off;
  NodePrefs* _node_prefs;
@@ -54,7 +61,7 @@ class UITask : public AbstractUITask {
 
 public:

-  UITask(mesh::MainBoard* board, BaseSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
+  UITask(mesh::MainBoard* board, MultiSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
      _next_refresh = 0;
      ui_started_at = 0;
  }
@@ -104,7 +104,7 @@ public:
    if (_status[0] == 0) return;

    display.setTextSize(1);
-    display.setColor(DisplayDriver::GREEN);
+    display.setColor(UIColor::primary_txt);

    // if (_needs_redraw) {
    //   _text_width = display.getTextWidth(_status);
@@ -56,24 +56,24 @@ public:
  int render(DisplayDriver& display) override {
    if (millis() < version_after) {
    // meshcore logo
-    display.setColor(DisplayDriver::BLUE);
+    display.setColor(UIColor::corp_blue);
    int logoWidth = 72;
    display.drawXbm(0, 0, meshcore_logo, 72, 36);
    } else {

    // meshcore website
    const char* website = "meshcore.io";
-    display.setColor(DisplayDriver::LIGHT);
+    display.setColor(UIColor::primary_txt);
    display.setTextSize(1);
    uint16_t websiteWidth = display.getTextWidth(website);
    display.setCursor((display.width() - websiteWidth) / 2, 9);
    display.print(website);

    // version info
-    display.setColor(DisplayDriver::LIGHT);
    display.setTextSize(1);
    display.drawTextCentered(display.width()/2, 18, _version_info);

+    display.setColor(UIColor::secondary_txt);
    display.setTextSize(1);
    display.drawTextCentered(display.width()/2, 27, FIRMWARE_BUILD_DATE);
    }
@@ -163,7 +163,7 @@ public:
      // display.print(filtered_name);


-      display.setColor(DisplayDriver::YELLOW);
+      display.setColor(UIColor::primary_txt);
      display.setTextSize(2);
      sprintf(tmp, "MSG: %d", _task->getMsgCount());
      display.setCursor(0, 10);
@@ -180,19 +180,19 @@ public:
        display.drawTextCentered(display.width() / 2, 54, tmp);
      #endif
      if (_task->hasConnection()) {
-        display.setColor(DisplayDriver::GREEN);
+        display.setColor(UIColor::warning_txt);
        display.setTextSize(1);
        display.drawTextCentered(display.width() / 2, display.height()-8, "< Connected >");

      } else if (the_mesh.getBLEPin() != 0) { // BT pin
-        display.setColor(DisplayDriver::RED);
+        display.setColor(UIColor::warning_txt);
        display.setTextSize(2);
        sprintf(tmp, "Pin:%d", the_mesh.getBLEPin());
        display.drawTextCentered(display.width() / 2, display.height()-8, tmp);
      }
    } else if (_page == HomePage::RECENT) {
      the_mesh.getRecentlyHeard(recent, UI_RECENT_LIST_SIZE);
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::primary_txt);
      int y = 8;
      for (int i = 0; i < UI_RECENT_LIST_SIZE; i++, y += 11) {
        auto a = &recent[i];
@@ -216,7 +216,7 @@ public:
        display.print(tmp);
      }
    } else if (_page == HomePage::RADIO) {
-      display.setColor(DisplayDriver::YELLOW);
+      display.setColor(UIColor::primary_txt);
      display.setTextSize(1);
      // frequency and spreading factor
      display.setCursor(0, 8);
@@ -238,14 +238,14 @@ public:
      display.drawTextRightAlign(display.width(), 26, tmp);

    } else if (_page == HomePage::BLUETOOTH) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::corp_blue);
      display.drawXbm((display.width() - 32) / 2, 8,
-          _task->isSerialEnabled() ? bluetooth_on : bluetooth_off,
+          _task->isBluetoothEnabled() ? bluetooth_on : bluetooth_off,
          32, 32);
      display.setTextSize(1);
      // display.drawTextCentered(display.width() / 2, 40 - 11, "toggle: " PRESS_LABEL);
    } else if (_page == HomePage::ADVERT) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::corp_blue);
      display.drawXbm((display.width() - 32) / 2, 8, advert_icon, 32, 32);
      // display.drawTextCentered(display.width() / 2, 40 - 11, "advert: " PRESS_LABEL);
 #if ENV_INCLUDE_GPS == 1
@@ -264,9 +264,11 @@ public:
 #else
      strcpy(buf, gps_state ? "gps on" : "gps off");
 #endif
+      display.setColor(UIColor::primary_txt);
      display.drawTextLeftAlign(0, y, buf);
      if (nmea == NULL) {
        // y = y + 8;
+        display.setColor(UIColor::warning_txt);
        display.drawTextLeftAlign(0, y, "Can't access GPS");
      } else {
        if (!gps_state || !nmea->isValid()) {
@@ -274,6 +276,7 @@ public:
        } else {
            sprintf(buf, "%d sat", nmea->satellitesCount());
        }
+        display.setColor(UIColor::primary_txt);
        display.drawTextRightAlign(display.width()-1, y, buf);
        y = y + 8;
        sprintf(buf, "lat %.4f",
@@ -349,8 +352,10 @@ public:
            r.skipData(type);
            strcpy(name, "unk"); sprintf(buf, "");
        }
+        display.setColor(UIColor::secondary_txt);
        display.setCursor(0, y);
        display.print(name);
+        display.setColor(UIColor::primary_txt);
        display.setCursor(
          display.width()-display.getTextWidth(buf)-1, y
        );
@@ -361,7 +366,7 @@ public:
      else sensors_scroll_offset = 0;
 #endif
    } else if (_page == HomePage::SHUTDOWN) {
-      display.setColor(DisplayDriver::GREEN);
+      display.setColor(UIColor::secondary_txt);
      display.setTextSize(1);
      if (_shutdown_init) {
        display.drawTextCentered(display.width() / 2, 20, "hibernating...");
@@ -386,10 +391,10 @@ public:
      return true;
    }
    if (c == KEY_ENTER && _page == HomePage::BLUETOOTH) {
-      if (_task->isSerialEnabled()) {  // toggle Bluetooth on/off
-        _task->disableSerial();
+      if (_task->isBluetoothEnabled()) {  // toggle Bluetooth on/off
+        _task->disableBluetooth();
      } else {
-        _task->enableSerial();
+        _task->enableBluetooth();
      }
      return true;
    }
@@ -566,8 +571,6 @@ void UITask::shutdown(bool restart){
  if (restart) {
    _board->reboot();
  } else {
-    _display->turnOff();
-    radio_driver.powerOff();
    // Power off board including radio, display, GPS and components
    _board->powerOff();
  }
@@ -674,7 +677,7 @@ void UITask::loop() {
        _cached_batt_mv,
        isBuzzerQuiet(),
        getGPSState(),
-        isSerialEnabled());
+        isBluetoothEnabled());

    bool status_dirty = _statusBar.needsRedraw();
    bool content_dirty = (millis() >= _next_refresh && curr);
@@ -694,9 +697,9 @@ void UITask::loop() {
        _display->setTextSize(1);
        int y = _display->height() / 3;
        int p = _display->height() / 32;
-        _display->setColor(DisplayDriver::DARK);
+        _display->setColor(UIColor::popup_bkg);
        _display->fillRect(p, y, _display->width() - p*2, y);
-        _display->setColor(DisplayDriver::LIGHT);  // draw box border
+        _display->setColor(UIColor::popup_txt);  // draw box border
        _display->drawRect(p, y, _display->width() - p*2, y);
        _display->drawTextCentered(_display->width() / 2, y + p*3, _alert);
        _next_refresh = _alert_expiry;   // will need refresh when alert is dismissed
@@ -4,7 +4,7 @@
 #include <helpers/ui/DisplayDriver.h>
 #include <helpers/ui/UIScreen.h>
 #include <helpers/SensorManager.h>
-#include <helpers/BaseSerialInterface.h>
+#include <helpers/MultiSerialInterface.h>
 #include <Arduino.h>
 #include <helpers/sensors/LPPDataHelpers.h>

@@ -71,7 +71,7 @@ class UITask : public AbstractUITask {

 public:

-  UITask(mesh::MainBoard* board, BaseSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
+  UITask(mesh::MainBoard* board, MultiSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
    next_batt_chck = _next_refresh = 0;
    _cached_batt_mv = 0;
    ui_started_at = 0;
@@ -22,6 +22,7 @@ KissModem::KissModem(Stream& serial, mesh::LocalIdentity& identity, mesh::RNG& r
  _getStatsCallback = nullptr;
  _config = {0, 0, 0, 0, 0};
  _signal_report_enabled = true;
+  resetOutputQueue();
 }

 void KissModem::begin() {
@@ -30,37 +31,168 @@ void KissModem::begin() {
  _rx_active = false;
  _has_pending_tx = false;
  _tx_state = TX_IDLE;
+  resetOutputQueue();
 }

-void KissModem::writeByte(uint8_t b) {
-  if (b == KISS_FEND) {
-    _serial.write(KISS_FESC);
-    _serial.write(KISS_TFEND);
-  } else if (b == KISS_FESC) {
-    _serial.write(KISS_FESC);
-    _serial.write(KISS_TFESC);
-  } else {
-    _serial.write(b);
+void KissModem::resetOutputQueue() {
+  _tx_frame_head = 0;
+  _tx_frame_tail = 0;
+  _tx_frame_count = 0;
+  _tx_busy_error_pending = false;
+  _tx_done_pending = false;
+  _tx_done_result = 0;
+}
+
+void KissModem::popTxFrame() {
+  _tx_frame_head = (uint8_t)((_tx_frame_head + 1) % KISS_TX_FRAME_QUEUE_DEPTH);
+  _tx_frame_count--;
+}
+
+uint16_t KissModem::appendEscapedByte(uint8_t* dest, uint16_t idx, uint16_t max_len, uint8_t b) {
+  if (b == KISS_FEND || b == KISS_FESC) {
+    if (idx + 2 > max_len) {
+      return 0;
+    }
+    dest[idx++] = KISS_FESC;
+    dest[idx++] = (b == KISS_FEND) ? KISS_TFEND : KISS_TFESC;
+    return idx;
  }
+  if (idx + 1 > max_len) {
+    return 0;
+  }
+  dest[idx++] = b;
+  return idx;
 }

-void KissModem::writeFrame(uint8_t type, const uint8_t* data, uint16_t len) {
-  _serial.write(KISS_FEND);
-  writeByte(type);
+uint16_t KissModem::encodeFrame(uint8_t type, const uint8_t* data, uint16_t len, uint8_t* dest, uint16_t max_len) {
+  if (max_len < KISS_FRAME_BOUNDARY_BYTES) {
+    return 0;
+  }
+
+  uint16_t idx = 0;
+  dest[idx++] = KISS_FEND;
+
+  idx = appendEscapedByte(dest, idx, max_len, type);
+  if (idx == 0) {
+    return 0;
+  }
+
  for (uint16_t i = 0; i < len; i++) {
-    writeByte(data[i]);
+    idx = appendEscapedByte(dest, idx, max_len, data[i]);
+    if (idx == 0) {
+      return 0;
+    }
  }
-  _serial.write(KISS_FEND);
+
+  if (idx + 1 > max_len) {
+    return 0;
+  }
+  dest[idx++] = KISS_FEND;
+  return idx;
 }

-void KissModem::writeHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len) {
-  _serial.write(KISS_FEND);
-  writeByte(KISS_CMD_SETHARDWARE);
-  writeByte(sub_cmd);
-  for (uint16_t i = 0; i < len; i++) {
-    writeByte(data[i]);
+bool KissModem::tryFlushFrames() {
+  while (_tx_frame_count > 0) {
+    const uint8_t idx = _tx_frame_head;
+    const uint16_t frame_len = _tx_frame_len[idx];
+    uint16_t written_len = _tx_frame_written[idx];
+
+    if (written_len >= frame_len) {
+      popTxFrame();
+      continue;
+    }
+
+    const int available = _serial.availableForWrite();
+    if (available <= 0) {
+      return false;
+    }
+
+    const uint16_t remaining = frame_len - written_len;
+    const uint16_t chunk_len = (available < (int)remaining) ? (uint16_t)available : remaining;
+    if (chunk_len == 0) {
+      return false;
+    }
+
+    size_t chunk_written = _serial.write(_tx_frame_buf[idx] + written_len, chunk_len);
+    if (chunk_written == 0) {
+      return false;
+    }
+
+    written_len += (uint16_t)chunk_written;
+    _tx_frame_written[idx] = written_len;
+
+    if (written_len < frame_len) {
+      return false;
+    }
+
+    popTxFrame();
  }
-  _serial.write(KISS_FEND);
+  return true;
+}
+
+bool KissModem::queueFrame(uint8_t type, const uint8_t* data, uint16_t len, bool mark_busy_error) {
+  if (_tx_frame_count >= KISS_TX_FRAME_QUEUE_DEPTH && !tryFlushFrames()) {
+    if (mark_busy_error) {
+      _tx_busy_error_pending = true;
+    }
+    return false;
+  }
+  const uint8_t idx = _tx_frame_tail;
+  uint16_t frame_len = encodeFrame(type, data, len, _tx_frame_buf[idx], sizeof(_tx_frame_buf[idx]));
+  if (frame_len == 0) {
+    return false;
+  }
+
+  _tx_frame_len[idx] = frame_len;
+  _tx_frame_written[idx] = 0;
+  _tx_frame_tail = (uint8_t)((_tx_frame_tail + 1) % KISS_TX_FRAME_QUEUE_DEPTH);
+  _tx_frame_count++;
+  tryFlushFrames();
+  return true;
+}
+
+bool KissModem::queuePendingBusyError() {
+  if (!_tx_busy_error_pending) {
+    return true;
+  }
+  const uint8_t err = HW_ERR_TX_BUSY;
+  if (!queueHardwareFrame(HW_RESP_ERROR, &err, 1, false)) {
+    return false;
+  }
+  _tx_busy_error_pending = false;
+  return true;
+}
+
+bool KissModem::queueHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len, bool mark_busy_error) {
+  if (len > KISS_MAX_FRAME_SIZE) {
+    return false;
+  }
+  _tx_hw_payload[0] = sub_cmd;
+  if (len > 0) {
+    memcpy(_tx_hw_payload + 1, data, len);
+  }
+  return queueFrame(KISS_CMD_SETHARDWARE, _tx_hw_payload, len + 1, mark_busy_error);
+}
+
+bool KissModem::queuePendingTxDone() {
+  if (!_tx_done_pending) {
+    return true;
+  }
+  if (!queueHardwareFrame(HW_RESP_TX_DONE, &_tx_done_result, 1, false)) {
+    return false;
+  }
+  _tx_done_pending = false;
+  return true;
+}
+
+void KissModem::setTxDonePending(uint8_t result) {
+  _tx_done_result = result;
+  _tx_done_pending = true;
+  _tx_state = TX_DONE_PENDING;
+}
+
+bool KissModem::writeHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len) {
+  return queueHardwareFrame(sub_cmd, data, len, true);
 }

 void KissModem::writeHardwareError(uint8_t error_code) {
@@ -68,6 +200,8 @@ void KissModem::writeHardwareError(uint8_t error_code) {
 }

 void KissModem::loop() {
+  tryFlushFrames();
+
  while (_serial.available()) {
    uint8_t b = _serial.read();

@@ -106,6 +240,8 @@ void KissModem::loop() {
  }

  processTx();
+  tryFlushFrames();
+  queuePendingBusyError();
 }

 void KissModem::processFrame() {
@@ -295,10 +431,7 @@ void KissModem::processTx() {
          _tx_timer = millis();
          _tx_state = TX_SENDING;
        } else {
-          uint8_t result = 0x00;
-          writeHardwareFrame(HW_RESP_TX_DONE, &result, 1);
-          _has_pending_tx = false;
-          _tx_state = TX_IDLE;
+          setTxDonePending(0x00);
        }
      }
      break;
@@ -306,14 +439,15 @@ void KissModem::processTx() {
    case TX_SENDING:
      if (_radio.isSendComplete()) {
        _radio.onSendFinished();
-        uint8_t result = 0x01;
-        writeHardwareFrame(HW_RESP_TX_DONE, &result, 1);
-        _has_pending_tx = false;
-        _tx_state = TX_IDLE;
+        setTxDonePending(0x01);
      } else if (millis() - _tx_timer >= _radio.getEstAirtimeFor(_pending_tx_len) * KISS_TX_TIMEOUT_FACTOR) {
        _radio.onSendFinished();
-        uint8_t result = 0x00;
-        writeHardwareFrame(HW_RESP_TX_DONE, &result, 1);
+        setTxDonePending(0x00);
+      }
+      break;
+
+    case TX_DONE_PENDING:
+      if (queuePendingTxDone()) {
        _has_pending_tx = false;
        _tx_state = TX_IDLE;
      }
@@ -322,8 +456,7 @@ void KissModem::processTx() {
 }

 void KissModem::onPacketReceived(int8_t snr, int8_t rssi, const uint8_t* packet, uint16_t len) {
-  writeFrame(KISS_CMD_DATA, packet, len);
-  if (_signal_report_enabled) {
+  if (queueFrame(KISS_CMD_DATA, packet, len) && _signal_report_enabled) {
    uint8_t meta[2] = { (uint8_t)snr, (uint8_t)rssi };
    writeHardwareFrame(HW_RESP_RX_META, meta, 2);
  }
@@ -13,6 +13,14 @@

 #define KISS_MAX_FRAME_SIZE  512
 #define KISS_MAX_PACKET_SIZE 255
+#define KISS_FRAME_BOUNDARY_BYTES 2
+#define KISS_TYPE_BYTES 1
+#define KISS_HW_SUBCMD_BYTES 1
+#define KISS_MAX_ESCAPABLE_BYTES (KISS_MAX_FRAME_SIZE + KISS_TYPE_BYTES + KISS_HW_SUBCMD_BYTES)
+#define KISS_MAX_ESCAPED_PAYLOAD_SIZE (2 * KISS_MAX_ESCAPABLE_BYTES)
+#define KISS_MAX_ENCODED_FRAME_SIZE (KISS_FRAME_BOUNDARY_BYTES + KISS_MAX_ESCAPED_PAYLOAD_SIZE)
+#define KISS_TX_FRAME_QUEUE_DEPTH 2
+#define KISS_HW_MAX_PAYLOAD_SIZE (KISS_MAX_FRAME_SIZE + KISS_HW_SUBCMD_BYTES)

 #define KISS_CMD_DATA        0x00
 #define KISS_CMD_TXDELAY     0x01
@@ -94,7 +102,8 @@ enum TxState {
  TX_WAIT_CLEAR,
  TX_SLOT_WAIT,
  TX_DELAY,
-  TX_SENDING
+  TX_SENDING,
+  TX_DONE_PENDING
 };

 class KissModem {
@@ -130,10 +139,28 @@ class KissModem {

  RadioConfig _config;
  bool _signal_report_enabled;
+  uint8_t _tx_frame_buf[KISS_TX_FRAME_QUEUE_DEPTH][KISS_MAX_ENCODED_FRAME_SIZE];
+  uint16_t _tx_frame_len[KISS_TX_FRAME_QUEUE_DEPTH];
+  uint16_t _tx_frame_written[KISS_TX_FRAME_QUEUE_DEPTH];
+  uint8_t _tx_frame_head;
+  uint8_t _tx_frame_tail;
+  uint8_t _tx_frame_count;
+  bool _tx_busy_error_pending;
+  bool _tx_done_pending;
+  uint8_t _tx_done_result;
+  uint8_t _tx_hw_payload[KISS_HW_MAX_PAYLOAD_SIZE];

-  void writeByte(uint8_t b);
-  void writeFrame(uint8_t type, const uint8_t* data, uint16_t len);
-  void writeHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len);
+  static uint16_t appendEscapedByte(uint8_t* dest, uint16_t idx, uint16_t max_len, uint8_t b);
+  static uint16_t encodeFrame(uint8_t type, const uint8_t* data, uint16_t len, uint8_t* dest, uint16_t max_len);
+  void resetOutputQueue();
+  void popTxFrame();
+  bool tryFlushFrames();
+  bool queueFrame(uint8_t type, const uint8_t* data, uint16_t len, bool mark_busy_error = true);
+  bool queuePendingBusyError();
+  bool queueHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len, bool mark_busy_error);
+  bool queuePendingTxDone();
+  void setTxDonePending(uint8_t result);
+  bool writeHardwareFrame(uint8_t sub_cmd, const uint8_t* data, uint16_t len);
  void writeHardwareError(uint8_t error_code);
  void processFrame();
  void handleHardwareCommand(uint8_t sub_cmd, const uint8_t* data, uint16_t len);
@@ -182,4 +209,5 @@ public:
  bool isTxBusy() const { return _tx_state != TX_IDLE; }
  /** True only when radio is actually transmitting; use to skip recvRaw in main loop. */
  bool isActuallyTransmitting() const { return _tx_state == TX_SENDING; }
+  bool isHostOutputBackedUp() const { return _tx_frame_count > 0 || _tx_busy_error_pending || _tx_done_pending; }
 };
@@ -20,6 +20,8 @@

 #define NOISE_FLOOR_CALIB_INTERVAL_MS 2000
 #define AGC_RESET_INTERVAL_MS 30000
+#define USB_TX_TIMEOUT_MS 50
+#define USB_TX_BUFFER_SIZE 1024

 StdRNG rng;
 mesh::LocalIdentity identity;
@@ -111,6 +113,10 @@ void setup() {
  uint32_t start = millis();
  while (!Serial && millis() - start < 3000) delay(10);
  delay(100);
+#if defined(ESP32) && ARDUINO_USB_MODE
+  Serial.setTxTimeoutMs(USB_TX_TIMEOUT_MS);
+  Serial.setTxBufferSize(USB_TX_BUFFER_SIZE);
+#endif
  modem = new KissModem(Serial, identity, rng, radio_driver, board, sensors);
 #endif

@@ -126,7 +132,7 @@ void setup() {
 void loop() {
  modem->loop();

-  if (!modem->isActuallyTransmitting()) {
+  if (!modem->isActuallyTransmitting() && !modem->isHostOutputBackedUp()) {
    if (!modem->isTxBusy()) {
      if ((uint32_t)(millis() - next_agc_reset_ms) >= AGC_RESET_INTERVAL_MS) {
        radio_driver.resetAGC();
@@ -2,35 +2,16 @@

 #include <Arduino.h>
 #include <Mesh.h>
-#if defined(ENABLE_OTA)
-  #include <helpers/ota/OtaContext.h>
-#endif
 #include <RTClib.h>
-#include <CayenneLPP.h>
 #include <target.h>

-#ifndef MESH_ENABLE_RECENT_REPEATERS
-  #define MESH_ENABLE_RECENT_REPEATERS  1
-#endif
-#ifndef MAX_RECENT_REPEATERS
-  // Only repeater firmware supplies this RAM-heavy history storage.
-  #if !MESH_ENABLE_RECENT_REPEATERS
-    #define MAX_RECENT_REPEATERS  0
-  #elif defined(ESP32) || defined(ESP32_PLATFORM)
-    #define MAX_RECENT_REPEATERS  2048
-  #elif defined(NRF52_PLATFORM)
-    #define MAX_RECENT_REPEATERS  512
-  #else
-    #define MAX_RECENT_REPEATERS  64
-  #endif
-#endif
-
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  #include <InternalFileSystem.h>
 #elif defined(RP2040_PLATFORM)
  #include <LittleFS.h>
 #elif defined(ESP32)
  #include <SPIFFS.h>
+  using File = fs::File;
 #endif

 #ifdef WITH_RS232_BRIDGE
@@ -43,17 +24,7 @@
 #define WITH_BRIDGE
 #endif

-#ifdef WITH_MQTT_BRIDGE
-#include "helpers/bridges/MQTTBridge.h"
-#define WITH_BRIDGE
-#endif
-
-#ifdef WITH_SNMP
-#include "helpers/SNMPAgent.h"
-#endif
-
 #include <helpers/AdvertDataHelpers.h>
-#include <helpers/AlertReporter.h>
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/ClientACL.h>
 #include <helpers/CommonCLI.h>
@@ -63,8 +34,12 @@
 #include <helpers/StatsFormatHelper.h>
 #include <helpers/TxtDataHelpers.h>
 #include <helpers/RegionMap.h>
+#include <helpers/RoutingPolicy.h>
 #include "RateLimiter.h"

+#ifdef WITH_BRIDGE
+extern AbstractBridge* bridge;
+#endif

 struct RepeaterStats {
  uint16_t batt_milli_volts;
@@ -96,175 +71,35 @@ struct NeighbourInfo {
 };

 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "6 Jun 2026"
-#endif
-#ifndef FIRMWARE_BUILD_EPOCH
-  #define FIRMWARE_BUILD_EPOCH  0UL
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif

 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif

 #define FIRMWARE_ROLE "repeater"

 #define PACKET_LOG_FILE  "/packet_log"

-#ifndef MAX_SCHEDULED_RADIO_SETTINGS_PER_TYPE
-  #define MAX_SCHEDULED_RADIO_SETTINGS_PER_TYPE 3
-#endif
-
-#define MAX_SCHEDULED_RADIO_SETTINGS (MAX_SCHEDULED_RADIO_SETTINGS_PER_TYPE * 2)
-
-#ifndef FLOOD_PACKET_FILTER_SLOTS
-  #define FLOOD_PACKET_FILTER_SLOTS 16
-#endif
-#define FLOOD_PACKET_FILTER_ANY_TYPE  0xFF
-#define FLOOD_PACKET_FILTER_MAX_HOPS  63
-
-#ifndef FLOOD_GROUP_MODERATION_SLOTS
-  #define FLOOD_GROUP_MODERATION_SLOTS 16
-#endif
-#define FLOOD_GROUP_MODERATION_NAME_LEN       32
-#define FLOOD_GROUP_MODERATION_PATH_HOPS_MAX  3
-#define FLOOD_GROUP_MODERATION_PATH_BYTES_MAX (FLOOD_GROUP_MODERATION_PATH_HOPS_MAX * 3)
-#define FLOOD_GROUP_MODERATION_HOPS_ALL       0xFF
-#define FLOOD_GROUP_MODERATION_RATE_UNLIMITED 0xFFFF
-
-#ifndef CLOCK_SYNC_SAMPLE_SLOTS
-  #define CLOCK_SYNC_SAMPLE_SLOTS 16
-#endif
-#define CLOCK_SYNC_REQUIRED_SAMPLES_MIN     3
-#define CLOCK_SYNC_REQUIRED_SAMPLES_MAX     CLOCK_SYNC_SAMPLE_SLOTS
-#define CLOCK_SYNC_REQUIRED_SAMPLES_DEFAULT 9
-#define CLOCK_SYNC_PATH_ID_SIZE             8
-#define CLOCK_SYNC_STARTUP_DELAY_MILLIS     (30ULL * 60ULL * 1000ULL)
-#define CLOCK_SYNC_RETRY_INTERVAL_MILLIS    (30ULL * 60ULL * 1000ULL)
-#define CLOCK_SYNC_SAMPLE_MAX_AGE_MILLIS    (2UL * 60UL * 60UL * 1000UL)
-#define CLOCK_SYNC_CONSENSUS_WINDOW_SECONDS 600UL
-#define CLOCK_SYNC_DRIFT_MIN_SECONDS        30UL
-#define CLOCK_SYNC_DRIFT_MAX_SECONDS        86400UL
-#define CLOCK_SYNC_DRIFT_DEFAULT_SECONDS    3600UL
-#define CLOCK_SYNC_MESH_SUPPRESS_NONE       0
-#define CLOCK_SYNC_MESH_SUPPRESS_CLI        1
-#define CLOCK_SYNC_MESH_SUPPRESS_GPS        2
-#define CLOCK_SYNC_MESH_SUPPRESS_INTERNET   3
-
-#define RECENT_REPEATER_MAX_AGE_MILLIS        (24UL * 60UL * 60UL * 1000UL)
-#define RECENT_REPEATER_SWEEP_INTERVAL_MILLIS (3UL * 60UL * 60UL * 1000UL)
-#define RADIO_APPLY_RETRY_INTERVAL_MILLIS     1000UL
-#define SCHEDULED_RADIO_CLOCK_CHECKPOINT_SECS 60UL
-
 class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
-  struct ScheduledRadioSetting {
-    bool active;
-    bool temporary;
-    bool started;
-    float freq;
-    float bw;
-    uint8_t sf;
-    uint8_t cr;
-    uint32_t start_time;
-    uint32_t end_time;
-  };
-
  FILESYSTEM* _fs;
  uint32_t last_millis;
  uint64_t uptime_millis;
  unsigned long next_local_advert, next_flood_advert;
-  unsigned long next_battery_alert_check;
-  unsigned long next_rx_watchdog_check;
-  unsigned long next_recent_repeater_sweep;
-  uint64_t last_battery_alert_sent;
-  mesh::Packet* pending_battery_alert_packet;
-  bool battery_alert_sent;
  bool _logging;
  NodePrefs _prefs;
  ClientACL  acl;
  CommonCLI _cli;
  uint8_t reply_data[MAX_PACKET_PAYLOAD];
  uint8_t reply_path[MAX_PATH_SIZE];
-  int8_t  reply_path_len;
-  uint8_t reply_path_hash_size;
+  uint8_t reply_path_len;
  TransportKeyStore key_store;
  RegionMap region_map, temp_map;
  RegionEntry* load_stack[8];
  RegionEntry* recv_pkt_region;
  TransportKey default_scope;
  RateLimiter discover_limiter, anon_limiter;
-  struct FloodRetryBridgeState {
-    uint8_t key[MAX_HASH_SIZE];
-    uint8_t source_mask;
-    uint8_t target_mask;
-    uint8_t heard_mask;
-    uint8_t progress_marker;
-    bool active;
-  };
-  struct FloodRetryBridgeReachability {
-    uint8_t prefix[MAX_ROUTE_HASH_BYTES];
-    uint8_t prefix_len;
-    uint32_t last_heard_millis;
-  };
-  struct FloodChannelBlockEntry {
-    bool active;
-    uint8_t key_len;
-    uint8_t max_hops;
-    uint8_t hash_prefix[FLOOD_CHANNEL_BLOCK_PREFIX_LEN];
-    uint8_t secret[PUB_KEY_SIZE];
-    char name[FLOOD_CHANNEL_BLOCK_NAME_LEN];
-  };
-  struct FloodPacketFilterEntry {
-    bool active;
-    uint8_t payload_type;
-    uint8_t min_hops;
-    uint8_t max_hops;
-  };
-  struct FloodGroupModerationEntry {
-    bool active;
-    uint8_t key_len;
-    uint8_t hash_prefix[FLOOD_CHANNEL_BLOCK_PREFIX_LEN];
-    uint8_t secret[PUB_KEY_SIZE];
-    char channel_name[FLOOD_GROUP_MODERATION_NAME_LEN];
-    char sender[FLOOD_GROUP_MODERATION_NAME_LEN];
-    uint8_t path_hash_size;
-    uint8_t path_hops;
-    uint8_t path[FLOOD_GROUP_MODERATION_PATH_BYTES_MAX];
-    uint8_t max_hops;
-    uint16_t rate_per_minute;
-    uint32_t rate_window_started;
-    uint16_t rate_window_count;
-    bool rate_window_active;
-  };
-  struct ClockSyncSample {
-    bool active;
-    uint8_t source_kind;
-    uint8_t source_id[4];
-    uint8_t path_id[CLOCK_SYNC_PATH_ID_SIZE];
-    uint32_t epoch;
-    uint32_t received_millis;
-  };
-  mutable FloodRetryBridgeState flood_retry_bridge_states[MAX_FLOOD_RETRY_SLOTS];
-  FloodRetryBridgeReachability flood_retry_bridge_reachability[FLOOD_RETRY_BRIDGE_BUCKETS + 1];
-  FloodChannelBlockEntry flood_channel_blocks[FLOOD_CHANNEL_BLOCK_SLOTS];
-  FloodPacketFilterEntry flood_packet_filters[FLOOD_PACKET_FILTER_SLOTS];
-  FloodGroupModerationEntry flood_group_moderation[FLOOD_GROUP_MODERATION_SLOTS];
-  ClockSyncSample clock_sync_samples[CLOCK_SYNC_SAMPLE_SLOTS];
-  bool clock_sync_mesh_enabled;
-  bool clock_sync_internet_enabled;
-  bool clock_sync_complete;
-  bool clock_sync_internet_pending;
-  uint8_t clock_sync_mesh_suppressed_by;
-  uint8_t clock_sync_last_result;
-  uint8_t clock_sync_last_source;
-  uint8_t clock_sync_last_sample_count;
-  uint8_t clock_sync_last_fresh_count;
-  uint8_t clock_sync_last_required_count;
-  uint8_t clock_sync_required_samples;
-  uint32_t clock_sync_drift_seconds;
-  uint32_t clock_sync_last_estimate;
-  uint32_t clock_sync_last_abs_drift;
-  uint32_t clock_sync_internet_requested_millis;
-  uint64_t clock_sync_next_attempt_uptime;
  uint32_t pending_discover_tag;
  unsigned long pending_discover_until;
  bool region_load_active;
@@ -273,77 +108,18 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
  NeighbourInfo neighbours[MAX_NEIGHBOURS];
 #endif
  CayenneLPP telemetry;
-  unsigned long _ota_update_at = 0;  // deferred `ota update` fire time (0 = none scheduled)
-  float active_bw;  // live BW, including temporary radio overrides
-  uint8_t active_sf;  // live SF, including temporary radio overrides
-  uint8_t active_cr;   // live CR, including temporary radio overrides
-  bool saved_radio_apply_pending;
-  bool temp_radio_handoff_pending;
-  bool scheduled_temp_radio_started;
-  uint32_t next_scheduled_radio_time;
-  unsigned long next_scheduled_radio_check_at;
-  uint32_t scheduled_temp_radio_end_time;
-  unsigned long scheduled_temp_radio_end_check_at;
-  bool scheduled_temp_radio_end_check_final;
-  unsigned long scheduled_radio_retry_at;
-  uint8_t scheduled_radio_retry_failures;
-  ScheduledRadioSetting scheduled_radio_settings[MAX_SCHEDULED_RADIO_SETTINGS];
+  unsigned long set_radio_at, revert_radio_at;
+  float pending_freq;
+  float pending_bw;
+  uint8_t pending_sf;
+  uint8_t pending_cr;
  int  matching_peer_indexes[MAX_CLIENTS];
-#if defined(WITH_MQTT_BRIDGE)
-  MQTTBridge* mqtt_bridge;
-#elif defined(WITH_RS232_BRIDGE)
+#if defined(WITH_RS232_BRIDGE)
  RS232Bridge bridge;
 #elif defined(WITH_ESPNOW_BRIDGE)
  ESPNowBridge bridge;
 #endif
-#ifdef WITH_BRIDGE
-  AbstractBridge* activeBridge() {
-#ifdef WITH_MQTT_BRIDGE
-    return mqtt_bridge;
-#else
-    return &bridge;
-#endif
-  }
-  const AbstractBridge* activeBridge() const {
-#ifdef WITH_MQTT_BRIDGE
-    return mqtt_bridge;
-#else
-    return &bridge;
-#endif
-  }
-#endif
-#ifdef WITH_SNMP
-  MeshSNMPAgent _snmp_agent;
-#endif
-#ifdef WITH_MQTT_BRIDGE
-  AlertReporter _alerter;
-#endif

-  bool extractDirectRetryPrefix(const mesh::Packet* packet, uint8_t* prefix, uint8_t& prefix_len) const;
-  int8_t getDirectRetryMinSNRX4() const;
-  uint8_t getDirectRetryCodingRateForSNR(int8_t snr_x4) const;
-  uint8_t getDirectRetryConfiguredMaxAttempts() const;
-  uint32_t getDirectRetryAttemptStepMillis() const;
-  bool hasFloodRetryPrefixes() const;
-  bool floodRetryPrefixMatches(const mesh::Packet* packet) const;
-  bool floodRetryLastHopMatches(const mesh::Packet* packet) const;
-  bool floodRetryPrefixIgnored(const uint8_t* prefix, uint8_t prefix_len) const;
-  uint8_t floodRetryEffectivePathLength(const mesh::Packet* packet, uint8_t max_hops = 0xFF) const;
-  bool floodRetryPrefixFresh(const uint8_t* prefix, uint8_t prefix_len) const;
-  uint8_t floodRetryBucketMaskForPrefix(const uint8_t* prefix, uint8_t prefix_len, bool require_fresh) const;
-  uint8_t floodRetryBucketMaskForPathHop(const uint8_t* prefix, uint8_t prefix_len, uint8_t hop,
-                                         uint8_t progress_marker) const;
-  uint8_t floodRetrySourceMask(const mesh::Packet* packet) const;
-  bool floodRetryBridgeBucketFresh(uint8_t bucket) const;
-  void recordFloodRetryBridgeReachability(const uint8_t* prefix, uint8_t prefix_len, uint8_t bucket_mask);
-  uint8_t floodRetryBridgeTargetMask(uint8_t source_mask) const;
-  uint8_t floodRetryBridgeHeardMask(const mesh::Packet* packet, uint8_t source_mask,
-                                    uint8_t progress_marker) const;
-  FloodRetryBridgeState* floodRetryBridgeStateFor(const mesh::Packet* packet, bool create) const;
-  void clearFloodRetryBridgeStateByKey(const uint8_t* retry_key);
-  void refreshFloodRetryReachability(const mesh::Packet* packet);
-  void formatFloodRetryPath(char* dest, size_t dest_len, const mesh::Packet* packet) const;
-  bool formatFloodRetryHeard(char* dest, size_t dest_len, const mesh::Packet* packet) const;
  void putNeighbour(const mesh::Identity& id, uint32_t timestamp, float snr);
  uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood);
  uint8_t handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
@@ -351,87 +127,11 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
  uint8_t handleAnonClockReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
  int handleRequest(ClientInfo* sender, uint32_t sender_timestamp, uint8_t* payload, size_t payload_len);
  mesh::Packet* createSelfAdvert();
-  bool sendRepeatersFloodText(const char* text, const TransportKey* scope = nullptr,
-                              mesh::Packet** queued_packet = nullptr);
-  const RegionEntry* findNarrowestBatteryAlertRegion(bool& ambiguous);
-  bool getBatteryAlertScopeForRegion(const RegionEntry& region, TransportKey& scope);
-  bool resolveBatteryAlertScope(TransportKey& scope);
-  void checkBatteryAlert();
-  void checkRxInactivityWatchdog();
-  void expireRecentRepeatersIfDue();
-  void printRecentRepeatersSerial();

  File openAppend(const char* fname);
  bool isLooped(const mesh::Packet* packet, const uint8_t max_counters[]);
-  bool applyRadioParams(float freq, float bw, uint8_t sf, uint8_t cr);
-  bool applySavedRadioParams();
-  void queueSavedRadioApply();
-  void refreshScheduledRadioState();
-  void processScheduledRadioSettings();
-  bool isMillisTimerDue(unsigned long timestamp) const;
-  void loadFloodChannelBlocks();
-  bool saveFloodChannelBlocks();
-  void seedDefaultFloodChannelBlocks();
-  void clearFloodChannelBlockEntry(FloodChannelBlockEntry& entry);
-  void deriveFloodChannelBlockPrefix(const uint8_t* secret, uint8_t key_len,
-                                     uint8_t prefix[FLOOD_CHANNEL_BLOCK_PREFIX_LEN]) const;
-  uint8_t resolveFloodChannelBlockHops(uint8_t max_hops) const;
-  bool floodChannelBlockHopApplies(const mesh::Packet* packet, uint8_t max_hops) const;
-  bool floodChannelDataHopApplies(const mesh::Packet* packet) const;
-  bool floodChannelBlockMatches(const FloodChannelBlockEntry& entry, const mesh::Packet* packet) const;
-  bool shouldBlockFloodChannelForward(const mesh::Packet* packet) const;
-  void loadFloodPacketFilters();
-  bool saveFloodPacketFilters();
-  bool shouldBlockFloodPacketForward(const mesh::Packet* packet) const;
-  void formatFloodPacketFilters(const char* args, char* reply) const;
-  void formatFloodPacketFilterDetail(int index, char* reply, size_t reply_len) const;
-  void setFloodPacketFilter(const char* args, char* reply);
-  void deleteFloodPacketFilter(const char* args, char* reply);
-  void loadFloodGroupModeration();
-  bool saveFloodGroupModeration();
-  bool shouldBlockFloodGroupTextForward(const mesh::Packet* packet);
-  void formatFloodGroupModeration(const char* args, char* reply) const;
-  void formatFloodGroupModerationDetail(int index, char* reply, size_t reply_len) const;
-  void setFloodGroupModeration(const char* args, char* reply);
-  void deleteFloodGroupModeration(const char* args, char* reply);
-  bool decodeFloodGroupPlainText(const mesh::Packet* packet, const uint8_t* secret, uint8_t key_len,
-                                 uint32_t& timestamp, char* sender, size_t sender_len) const;
-  void loadClockSyncPrefs();
-  bool saveClockSyncPrefs();
-  void resetClockSyncAttempt();
-  void suppressMeshClockSyncForBoot(uint8_t source);
-  void checkGpsClockSyncOverride();
-  uint32_t estimateClockTransitMillis(const mesh::Packet* packet) const;
-  void recordClockSyncSample(uint8_t source_kind, const uint8_t source_id[4], uint32_t epoch,
-                             const mesh::Packet* packet);
-  void recordAcceptedFloodClockSample(const mesh::Packet* packet);
-  void recordPublicChannelClockSample(const mesh::Packet* packet);
-  bool estimateMeshClock(uint32_t& estimate, uint8_t& fresh_count,
-                         uint8_t& agreeing_count, uint8_t& required_count) const;
-  bool applyClockEstimate(uint32_t estimate, uint8_t source, uint8_t sample_count);
-  void checkClockSync();
-  void formatClockSyncStatus(char* reply, size_t reply_len) const;
-  int findFloodChannelBlockBySelector(const char* selector) const;
-  int findFloodChannelBlockSlot(const uint8_t prefix[FLOOD_CHANNEL_BLOCK_PREFIX_LEN], const char* name) const;
-  void formatFloodChannelBlockDetail(char* reply, int idx) const;
-  bool hasScheduledRadioWorkDue() const;
-  uint32_t limitSleepToMillisTimer(unsigned long timestamp, uint32_t sleep_secs) const;
-  uint32_t limitSleepToScheduledRadioWork(uint32_t sleep_secs) const;
-  bool hasStartedScheduledTempRadio() const;
-  int findFreeScheduledRadioSlot() const;
-  int countScheduledRadioSettings(bool temporary) const;
-  int findScheduledRadioSettingByIndex(bool temporary, int wanted) const;
-  int getScheduledRadioSettingIndex(bool temporary, int slot_idx) const;
-  bool scheduledRadioConflicts(bool temporary, uint32_t start_time, uint32_t end_time) const;
-  void clearScheduledRadioSetting(int idx, bool restore_if_started);
-  void formatScheduledRadioDuration(char* dest, size_t dest_len, uint32_t target_time) const;
-  void formatRadioParamTuple(char* dest, size_t dest_len, const ScheduledRadioSetting& setting) const;
-  void formatScheduledRadioSetting(char* reply, int setting_idx, int display_idx) const;

 protected:
-#if defined(ENABLE_OTA)
-  bool isTempRadioActive() const override;
-#endif
  float getAirtimeBudgetFactor() const override {
    return _prefs.airtime_factor;
  }
@@ -447,28 +147,6 @@ protected:

  uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
-  bool supportsBasicRetryConfig() const override { return true; }
-  bool supportsAdvancedRetryConfig() const override { return true; }
-  void onRetryConfigChanged() override;
-  uint8_t getDefaultTxCodingRate() const override { return active_cr; }
-  bool allowDirectRetry(const mesh::Packet* packet, const uint8_t* next_hop_hash, uint8_t next_hop_hash_len) const override;
-  bool maybeShortCircuitDirect(mesh::Packet* packet) override;
-  void configureDirectRetryPacket(mesh::Packet* retry, const mesh::Packet* original, uint8_t retry_attempt) override;
-  uint32_t getDirectRetryEchoDelay(const mesh::Packet* packet) const override;
-  uint8_t getDirectRetryMaxAttempts(const mesh::Packet* packet) const override;
-  uint32_t getDirectRetryAttemptDelay(const mesh::Packet* packet, uint8_t attempt_idx) override;
-  void onDirectRetryEvent(const char* event, const mesh::Packet* packet, uint32_t delay_millis, uint8_t retry_attempt,
-                          const uint8_t* target_hash = NULL, uint8_t target_hash_len = 0,
-                          int16_t payload_type = -1) override;
-  void onDirectRetryFailed(const uint8_t* next_hop_hash, uint8_t next_hop_hash_len) override;
-  void onDirectRetrySucceeded(const uint8_t* next_hop_hash, uint8_t next_hop_hash_len, int8_t snr_x4) override;
-  bool allowFloodRetry(const mesh::Packet* packet) const override;
-  void onFloodRetryEvent(const char* event, const mesh::Packet* packet, uint32_t delay_millis, uint8_t retry_attempt) override;
-  void onFloodRetrySlotReleased(const uint8_t* retry_key) override;
-  bool hasFloodRetryTargetPrefix(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxPathLength(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxAttempts(const mesh::Packet* packet) const override;
-  bool isFloodRetryEchoTarget(const mesh::Packet* packet, uint8_t progress_marker) const override;

  int getInterferenceThreshold() const override {
    return _prefs.interference_threshold;
@@ -479,11 +157,6 @@ protected:
  int getAGCResetInterval() const override {
    return ((int)_prefs.agc_reset_interval) * 4000;   // milliseconds
  }
-#ifdef WITH_MQTT_BRIDGE
-  uint32_t getRadioWatchdogMillis() const override {
-    return ((uint32_t)_cli.getObserverPrefs()->radio_watchdog_minutes) * 60000UL;
-  }
-#endif
  uint8_t getExtraAckTransmitCount() const override {
    return _prefs.multi_acks;
  }
@@ -495,8 +168,6 @@ protected:
 #endif

  mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;
-  void onSendComplete(mesh::Packet* packet) override;
-  void onSendFail(mesh::Packet* packet) override;

  void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
  int searchPeersByHash(const uint8_t* hash) override;
@@ -505,10 +176,8 @@ protected:
  void onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_idx, const uint8_t* secret, uint8_t* data, size_t len) override;
  bool onPeerPathRecv(mesh::Packet* packet, int sender_idx, const uint8_t* secret, uint8_t* path, uint8_t path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
  void onControlDataRecv(mesh::Packet* packet) override;
-  // OTA mesh-integration is centralized in mesh::Mesh (no per-example onOtaRecv / send adapter / tick).

  void sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size);
-  void sendClientReply(ClientInfo* client, mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size);

 public:
  MyMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables);
@@ -527,22 +196,10 @@ public:
    _cli.savePrefs(_fs);
  }

-  void onManualClockSet() override;
-
-  bool sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size);
+  void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size);

  // CommonCLICallbacks
  void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override;
-
-#ifdef WITH_MQTT_BRIDGE
-  void onAlertConfigChanged() override { _alerter.onConfigChanged(); }
-  bool sendAlertText(const char* text) override { return _alerter.sendText(text); }
-#endif
-  bool resolveAlertScope(TransportKey& dest) override;
-  void addScheduledRadioParams(bool temporary, float freq, float bw, uint8_t sf, uint8_t cr,
-                               uint32_t start_time, uint32_t end_time, char* reply) override;
-  void formatScheduledRadioParams(bool temporary, const char* selector, char* reply) override;
-  void deleteScheduledRadioParams(bool temporary, const char* selector, char* reply) override;
  bool formatFileSystem() override;
  void sendSelfAdvertisement(int delay_millis, bool flood) override;
  void updateAdvertTimer() override;
@@ -556,155 +213,40 @@ public:

  void dumpLogFile() override;
  void setTxPower(int8_t power_dbm) override;
-  bool setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) override;
-  void getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) override;
  void formatNeighborsReply(char *reply) override;
  void removeNeighbor(const uint8_t* pubkey, int key_len) override;
  void formatStatsReply(char *reply) override;
  void formatRadioStatsReply(char *reply) override;
-  void formatRadioDiagReply(char *reply) override;
  void formatPacketStatsReply(char *reply) override;
-  void formatRecentRepeatersReply(char *reply, int page) override;
-  bool setRecentRepeater(const uint8_t* prefix, uint8_t prefix_len, int8_t snr_x4) override;
-  void clearRecentRepeaters() override;
  void startRegionsLoad() override;
  bool saveRegions() override;
  void onDefaultRegionChanged(const RegionEntry* r) override;
-  void setFloodChannelBlock(int index, const uint8_t* secret, uint8_t key_len,
-                            const char* name, uint8_t max_hops, char* reply) override;
-  void formatFloodChannelBlocks(const char* selector, char* reply) override;
-  void deleteFloodChannelBlock(const char* selector, char* reply) override;

  mesh::LocalIdentity& getSelfId() override { return self_id; }

  void saveIdentity(const mesh::LocalIdentity& new_id) override;
  void clearStats() override;

-  void handleCommand(uint32_t sender_timestamp, ClientInfo* sender, char* command, char* reply);
-  void handleCommand(uint32_t sender_timestamp, char* command, char* reply) {
-    handleCommand(sender_timestamp, NULL, command, reply);
-  }
+  void handleCommand(uint32_t sender_timestamp, char* command, char* reply);
  void loop();
-  uint32_t getPowerSaveSleepSeconds(uint32_t max_secs) const;

 #if defined(WITH_BRIDGE)
  void setBridgeState(bool enable) override {
-#ifdef WITH_MQTT_BRIDGE
-    if (!mqtt_bridge) {
-      MQTTNodeInfo node_info;
-      node_info.node_name = _prefs.node_name;
-      node_info.freq = &_prefs.freq;
-      node_info.bw = &_prefs.bw;
-      node_info.sf = &_prefs.sf;
-      node_info.cr = &_prefs.cr;
-      node_info.repeat_flag = &_prefs.disable_fwd;
-      node_info.repeat_when_nonzero = false;
-      mqtt_bridge = new MQTTBridge(node_info, _cli.getObserverPrefs(),
-                                   getRTCClock(), &self_id);
-      if (!mqtt_bridge) return;
-    }
-#endif
-    AbstractBridge* active_bridge = activeBridge();
-    if (!active_bridge || enable == active_bridge->isRunning()) return;
+    if (enable == bridge.isRunning()) return;
    if (enable)
    {
-#ifdef WITH_MQTT_BRIDGE
-      // Set device metadata before starting bridge (same as in begin())
-      char device_id[65];
-      mesh::LocalIdentity self_id = getSelfId();
-      mesh::Utils::toHex(device_id, self_id.pub_key, PUB_KEY_SIZE);
-      mqtt_bridge->setDeviceID(device_id);
-      mqtt_bridge->setFirmwareVersion(getFirmwareVer());
-      mqtt_bridge->setBoardModel(_cli.getBoard()->getManufacturerName());
-      mqtt_bridge->setBuildDate(getBuildDate());
-      mqtt_bridge->setStatsSources(this, _radio, _cli.getBoard(), _ms);
-#endif
-      active_bridge->begin();
-#ifdef WITH_MQTT_BRIDGE
-      _alerter.setBridge(mqtt_bridge);
-#endif
+      bridge.begin();
    }
-    else
+    else 
    {
-      active_bridge->end();
-#ifdef WITH_MQTT_BRIDGE
-      _alerter.setBridge(nullptr);
-#endif
+      bridge.end();
    }
  }

  void restartBridge() override {
-    AbstractBridge* active_bridge = activeBridge();
-    if (!active_bridge || !active_bridge->isRunning()) return;
-    active_bridge->end();
-#ifdef WITH_MQTT_BRIDGE
-    // Set device metadata before restarting bridge (same as in begin())
-    char device_id[65];
-    mesh::LocalIdentity self_id = getSelfId();
-    mesh::Utils::toHex(device_id, self_id.pub_key, PUB_KEY_SIZE);
-    mqtt_bridge->setDeviceID(device_id);
-    mqtt_bridge->setFirmwareVersion(getFirmwareVer());
-    mqtt_bridge->setBoardModel(_cli.getBoard()->getManufacturerName());
-    mqtt_bridge->setBuildDate(getBuildDate());
-    mqtt_bridge->setStatsSources(this, _radio, _cli.getBoard(), _ms);
-#endif
-    active_bridge->begin();
-  }
-
-  void restartBridgeSlot(int slot) override {
-#ifdef WITH_MQTT_BRIDGE
-    if (!mqtt_bridge || !mqtt_bridge->isRunning()) return;
-    mqtt_bridge->setSlotPreset(slot, _cli.getObserverPrefs()->mqtt_slot_preset[slot]);
-#else
-    (void)slot;
-#endif
-  }
-
-  // Schedule the pull-OTA flash to run from loop() in ~2.5 s, leaving time for the
-  // "Beginning update..." CLI reply (CLI_REPLY_DELAY_MILLIS = 600 ms) to transmit
-  // before the flash blocks the loop and reboots.
-  bool beginDeferredOtaUpdate() override {
-    _ota_update_at = millis() + 2500;
-    if (_ota_update_at == 0) _ota_update_at = 1;  // 0 means "none"
-    return true;
-  }
-
-  int getQueueSize() override {
-#ifdef WITH_MQTT_BRIDGE
-    return mqtt_bridge ? mqtt_bridge->getQueueSize() : 0;
-#else
-    return 0;
-#endif
-  }
-
-  bool isMqttBridgeRunning() override {
-#ifdef WITH_MQTT_BRIDGE
-    return mqtt_bridge && mqtt_bridge->isRunning();
-#else
-    return false;
-#endif
-  }
-
-  bool syncMqttNtp() override {
-#ifdef WITH_MQTT_BRIDGE
-    if (!mqtt_bridge || !mqtt_bridge->isRunning()) return false;
-    // Marshal onto the MQTT task (Core 0); this runs on the CLI thread (Core 1).
-    return mqtt_bridge->requestForcedNtpSync();
-#else
-    return false;
-#endif
-  }
-
-  bool runMqttNtpDiag(char* reply, size_t reply_size, bool verbose) override {
-#ifdef WITH_MQTT_BRIDGE
-    if (!mqtt_bridge || !mqtt_bridge->isRunning()) return false;
-    return mqtt_bridge->ntpDiag(reply, reply_size, verbose);
-#else
-    (void)reply;
-    (void)reply_size;
-    (void)verbose;
-    return false;
-#endif
+    if (!bridge.isRunning()) return;
+    bridge.end();
+    bridge.begin();
  }
 #endif

@@ -713,4 +255,8 @@ public:

  bool setRxBoostedGain(bool enable) override;

+  #if defined(USE_LR2021)
+  virtual bool configSideDetectors(const uint8_t sideDetSFs[], uint8_t num, float bw) override;
+  #endif
+
 };
@@ -10,11 +10,6 @@ class RateLimiter {
 public:
  RateLimiter(uint16_t maximum, uint32_t secs): _maximum(maximum), _secs(secs), _start_timestamp(0), _count(0) { }

-  void reset() {
-    _start_timestamp = 0;
-    _count = 0;
-  }
-
  bool allow(uint32_t now) {
    if (now < _start_timestamp + _secs) {
      _count++;
@@ -25,4 +20,4 @@ public:
    }
    return true;
  }
-};
+};
@@ -1,4 +1,5 @@
 #include "UITask.h"
+#include "target.h"
 #include <Arduino.h>
 #include <helpers/CommonCLI.h>

@@ -6,13 +7,11 @@
 #define USER_BTN_PRESSED LOW
 #endif

-#ifdef WITH_MQTT_BRIDGE
-#include <WiFi.h>
-#endif
-
 #define AUTO_OFF_MILLIS      20000  // 20 seconds
 #define BOOT_SCREEN_MILLIS   4000   // 4 seconds

+#define POWEROFF_DELAY 3000
+
 // 'meshcore', 128x13px
 static const uint8_t meshcore_logo [] PROGMEM = {
    0x3c, 0x01, 0xe3, 0xff, 0xc7, 0xff, 0x8f, 0x03, 0x87, 0xfe, 0x1f, 0xfe, 0x1f, 0xfe, 0x1f, 0xfe, 
@@ -33,9 +32,14 @@ static const uint8_t meshcore_logo [] PROGMEM = {
 void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* firmware_version) {
  _prevBtnState = HIGH;
  _auto_off = millis() + AUTO_OFF_MILLIS;
+  _started_at = millis();
  _node_prefs = node_prefs;
  _display->turnOn();

+#if defined(PIN_USER_BTN) && defined(DISPLAY_CLASS)
+  user_btn.begin();
+#endif
+
  // strip off dash and commit hash by changing dash to null terminator
  // e.g: v1.2.3-abcdef -> v1.2.3
  char *version = strdup(firmware_version);
@@ -51,42 +55,50 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi

 void UITask::renderCurrScreen() {
  char tmp[80];
-  if (millis() < BOOT_SCREEN_MILLIS) { // boot screen
+  if (millis() < _started_at + BOOT_SCREEN_MILLIS) { // boot screen
    // meshcore logo
-    _display->setColor(DisplayDriver::BLUE);
+    _display->setColor(UIColor::corp_blue);
    int logoWidth = 128;
    _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);

    // meshcore website
    const char* website = "https://meshcore.io";
-    _display->setColor(DisplayDriver::LIGHT);
+    _display->setColor(UIColor::primary_txt);
    _display->setTextSize(1);
-    uint16_t websiteWidth = _display->getTextWidth(website);
-    _display->setCursor((_display->width() - websiteWidth) / 2, 22);
-    _display->print(website);
+    _display->drawTextCentered(_display->width() / 2, 22, website);

    // version info
-    _display->setColor(DisplayDriver::LIGHT);
    _display->setTextSize(1);
-    uint16_t versionWidth = _display->getTextWidth(_version_info);
-    _display->setCursor((_display->width() - versionWidth) / 2, 35);
-    _display->print(_version_info);
+    _display->drawTextCentered(_display->width() / 2, 35, _version_info);

    // node type
    const char* node_type = "< Repeater >";
-    uint16_t typeWidth = _display->getTextWidth(node_type);
-    _display->setCursor((_display->width() - typeWidth) / 2, 48);
-    _display->print(node_type);
-  } else {  // home screen
-    // node name
+    _display->drawTextCentered(_display->width() / 2, 48, node_type);
+  } else if (_powering_off_at > 0) {
+    // meshcore logo
+    _display->setColor(UIColor::corp_blue);
+    int logoWidth = 128;
+    _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);
+
+    // meshcore website
+    const char* website = "https://meshcore.io";
+    _display->setColor(UIColor::primary_txt);
+    _display->setTextSize(1);
+    _display->drawTextCentered(_display->width()/ 2, 22, website);
+
+    // Powering off
+    const char* poweroff_string = "Turning OFF";
+    uint16_t poffWidth = _display->getTextWidth(poweroff_string);
+    _display->setCursor((_display->width() - poffWidth) / 2, 48);
+    _display->drawTextCentered(_display->width()/2, 48, poweroff_string);
+  } else {
    _display->setCursor(0, 0);
    _display->setTextSize(1);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::primary_txt);
    _display->print(_node_prefs->node_name);

    // freq / sf
    _display->setCursor(0, 20);
-    _display->setColor(DisplayDriver::YELLOW);
    sprintf(tmp, "FREQ: %06.3f SF%d", _node_prefs->freq, _node_prefs->sf);
    _display->print(tmp);

@@ -94,36 +106,23 @@ void UITask::renderCurrScreen() {
    _display->setCursor(0, 30);
    sprintf(tmp, "BW: %03.2f CR: %d", _node_prefs->bw, _node_prefs->cr);
    _display->print(tmp);
-
-#ifdef WITH_MQTT_BRIDGE
-    // Display IP address for MQTT bridge devices
-    if (WiFi.status() == WL_CONNECTED) {
-      IPAddress ip = WiFi.localIP();
-      _display->setCursor(0, 40);
-      _display->setColor(DisplayDriver::LIGHT);
-      snprintf(tmp, sizeof(tmp), "IP: %d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
-      _display->print(tmp);
-    }
-#endif
  }
 }

 void UITask::loop() {
-#ifdef PIN_USER_BTN
-  if (millis() >= _next_read) {
-    int btnState = digitalRead(PIN_USER_BTN);
-    if (btnState != _prevBtnState) {
-      if (btnState == USER_BTN_PRESSED) {  // pressed?
-        if (_display->isOn()) {
-          // TODO: any action ?
-        } else {
-          _display->turnOn();
-        }
-        _auto_off = millis() + AUTO_OFF_MILLIS;   // extend auto-off timer
-      }
-      _prevBtnState = btnState;
+#if defined(PIN_USER_BTN) && defined(DISPLAY_CLASS)
+  int ev = user_btn.check();
+  if (ev == BUTTON_EVENT_CLICK) {
+    if (_display->isOn()) {
+      // TODO: any action ?
+    } else {
+      _display->turnOn();
    }
-    _next_read = millis() + 200;  // 5 reads per second
+    _auto_off = millis() + AUTO_OFF_MILLIS;   // extend auto-off timer
+  } else if (ev == BUTTON_EVENT_LONG_PRESS) {
+      _display->turnOn();
+      Serial.println("Powering Off");
+      _powering_off_at = millis() + POWEROFF_DELAY; 
  }
 #endif

@@ -139,4 +138,13 @@ void UITask::loop() {
      _display->turnOff();
    }
  }
+
+  if (_powering_off_at > 0) { // power off timer armed
+#ifdef LED_PIN
+    digitalWrite(LED_PIN, LED_STATE_ON); // switch on the led until poweroff
+#endif
+    if (millis() > _powering_off_at) {
+      _board->powerOff();  // should not return
+    }
+  }
 }
@@ -4,15 +4,18 @@
 #include <helpers/CommonCLI.h>

 class UITask {
+  mesh::MainBoard* _board;
  DisplayDriver* _display;
  unsigned long _next_read, _next_refresh, _auto_off;
  int _prevBtnState;
  NodePrefs* _node_prefs;
  char _version_info[32];
+  unsigned long _powering_off_at = 0;
+  unsigned long _started_at = 0;

  void renderCurrScreen();
 public:
-  UITask(DisplayDriver& display) : _display(&display) { _next_read = _next_refresh = 0; }
+  UITask(mesh::MainBoard& board, DisplayDriver& display) : _board(&board), _display(&display) { _next_read = _next_refresh = 0; }
  void begin(NodePrefs* node_prefs, const char* build_date, const char* firmware_version);

  void loop();
@@ -5,16 +5,16 @@

 #ifdef DISPLAY_CLASS
  #include "UITask.h"
-  static UITask ui_task(display);
+  static UITask ui_task(board, display);
+#endif
+
+#ifdef ETHERNET_ENABLED
+  #define ETHERNET_CLI_BANNER "MeshCore Repeater CLI"
+  #include <helpers/nrf52/EthernetCLI.h>
 #endif

 StdRNG fast_rng;
-#if MAX_RECENT_REPEATERS > 0
-SimpleMeshTables::RecentRepeaterInfo recent_repeater_storage[MAX_RECENT_REPEATERS];
-SimpleMeshTables tables(recent_repeater_storage, MAX_RECENT_REPEATERS);
-#else
 SimpleMeshTables tables;
-#endif

 MyMesh the_mesh(board, radio_driver, *new ArduinoMillis(), fast_rng, rtc_clock, tables);

@@ -23,6 +23,9 @@ void halt() {
 }

 static char command[160];
+#ifdef ETHERNET_ENABLED
+static char ethernet_command[160];
+#endif

 // For power saving
 unsigned long POWERSAVING_FIRSTSLEEP_SECS = 120; // The first sleep (if enabled) from boot
@@ -91,15 +94,13 @@ void setup() {
    store.save("_main", the_mesh.self_id);
  }

-  // Print the running firmware version at boot so it's visible after an OTA
-  // reboot without having to issue `ver` manually.
-  Serial.print("Firmware: "); Serial.print(FIRMWARE_VERSION);
-  Serial.print(" (built "); Serial.print(FIRMWARE_BUILD_DATE); Serial.println(")");
-
  Serial.print("Repeater ID: ");
  mesh::Utils::printHex(Serial, the_mesh.self_id.pub_key, PUB_KEY_SIZE); Serial.println();

  command[0] = 0;
+#ifdef ETHERNET_ENABLED
+  ethernet_command[0] = 0;
+#endif

  sensors.begin();

@@ -109,6 +110,10 @@ void setup() {
  ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
 #endif

+#ifdef ETHERNET_ENABLED
+  ethernet_start_task();
+#endif
+
  // send out initial zero hop Advertisement to the mesh
 #if ENABLE_ADVERT_ON_BOOT == 1
  the_mesh.sendSelfAdvertisement(16000, false);
@@ -118,6 +123,7 @@ void setup() {
 }

 void loop() {
+  // Handle Serial CLI
  int len = strlen(command);
  while (Serial.available() && len < sizeof(command)-1) {
    char c = Serial.read();
@@ -136,7 +142,14 @@ void loop() {
    Serial.print('\n');
    command[len - 1] = 0;  // replace newline with C string null terminator
    char reply[160];
-    the_mesh.handleCommand(0, NULL, command, reply);  // NOTE: there is no sender_timestamp via serial!
+    reply[0] = 0;
+#ifdef ETHERNET_ENABLED
+    if (!ethernet_handle_command(command, reply)) {
+      the_mesh.handleCommand(0, command, reply);
+    }
+#else
+    the_mesh.handleCommand(0, command, reply);  // NOTE: there is no sender_timestamp via serial!
+#endif
    if (reply[0]) {
      Serial.print("  -> "); Serial.println(reply);
    }
@@ -144,7 +157,20 @@ void loop() {
    command[0] = 0;  // reset command buffer
  }

-#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_)
+#ifdef ETHERNET_ENABLED
+  ethernet_loop_maintain();
+  if (ethernet_read_line(ethernet_command, sizeof(ethernet_command))) {
+    char reply[160];
+    reply[0] = 0;
+    if (!ethernet_handle_command(ethernet_command, reply)) {
+      the_mesh.handleCommand(0, ethernet_command, reply);
+    }
+    ethernet_send_reply(reply);
+    ethernet_command[0] = 0;
+  }
+#endif
+
+#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_) && !defined(DISPLAY_CLASS)
  // Hold the user button to power off the SenseCAP Solar repeater.
  int btnState = digitalRead(PIN_USER_BTN);
  if (btnState == LOW) {
@@ -169,24 +195,13 @@ void loop() {
 #ifdef HAS_EXTERNAL_WATCHDOG
  external_watchdog.loop();
 #endif
-  if (the_mesh.getNodePrefs()->powersaving_enabled && !board.isUsbDataConnected()) {
-    uint32_t sleep_secs = the_mesh.getPowerSaveSleepSeconds(30);
-#ifdef HAS_EXTERNAL_WATCHDOG
-    if (sleep_secs > 0) external_watchdog.feed();
-#endif
+  if (the_mesh.getNodePrefs()->powersaving_enabled && !the_mesh.hasPendingWork()) {
 #if defined(NRF52_PLATFORM)
-    if (sleep_secs > 0) {
-      board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
-    }
+    board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
 #else
-    if (sleep_secs > 0 && the_mesh.millisHasNowPassed(POWERSAVING_FIRSTSLEEP_SECS * 1000)) { // To check if it is time to sleep
-      board.sleep(sleep_secs); // Sleep. Wake up for scheduled jobs or when receiving a LoRa packet
+    if (the_mesh.millisHasNowPassed(POWERSAVING_FIRSTSLEEP_SECS * 1000)) { // To check if it is time to sleep
+      board.sleep(30); // Sleep. Wake up after a while or when receiving a LoRa packet
    }
 #endif
  }
-
-  if (the_mesh.getNodePrefs()->reboot_interval > 0 &&
-      the_mesh.millisHasNowPassed(the_mesh.getNodePrefs()->reboot_interval * 3600000)) {
-    board.reboot();
-  }
 }
@@ -1,12 +1,4 @@
 #include "MyMesh.h"
-#include <helpers/RxReservePacketManager.h>
-
-static uint32_t nextRadioApplyRetryDelay(uint8_t& failure_count) {
-  uint8_t shift = failure_count < 5 ? failure_count : 5;
-  if (failure_count < 6) failure_count++;
-  uint32_t delay_ms = 1000UL << shift;
-  return delay_ms > 30000UL ? 30000UL : delay_ms;
-}

 #define REPLY_DELAY_MILLIS          1500
 #define PUSH_NOTIFY_DELAY_MILLIS    2000
@@ -47,18 +39,35 @@ struct ServerStats {
 };

 void MyMesh::addPost(ClientInfo *client, const char *postData) {
-  // TODO: suggested postData format: <title>/<descrption>
-  posts[next_post_idx].author = client->id; // add to cyclic queue
-  StrHelper::strncpy(posts[next_post_idx].text, postData, MAX_POST_TEXT_LEN);
+  storePost(client->id, postData);
+}

-  posts[next_post_idx].post_timestamp = getRTCClock()->getCurrentTimeUnique();
+void MyMesh::addSystemPost(const char *postData) {
+  if (!postData || postData[0] == 0) return;
+
+  MESH_DEBUG_PRINTLN("room.post: addSystemPost: %s", postData);
+
+  storePost(self_id, postData);
+}
+
+void MyMesh::storePost(const mesh::Identity &author, const char *postData) {
+  int idx = next_post_idx;
+  // TODO: suggested postData format: <title>/<descrption>
+  posts[idx].author = author; // add to cyclic queue
+  StrHelper::strncpy(posts[idx].text, postData, MAX_POST_TEXT_LEN);
+
+  posts[idx].post_timestamp = getRTCClock()->getCurrentTimeUnique();
+  MESH_DEBUG_PRINTLN("room.post: storePost idx=%d text=%s", idx, posts[idx].text);
+  MESH_DEBUG_PRINTLN("room.post: timestamp=%u", posts[idx].post_timestamp);
  next_post_idx = (next_post_idx + 1) % MAX_UNSYNCED_POSTS;

  next_push = futureMillis(PUSH_NOTIFY_DELAY_MILLIS);
  _num_posted++; // stats
+  MESH_DEBUG_PRINTLN("room.post: next_post_idx=%d num_posted=%d push scheduled", next_post_idx, _num_posted);
 }

 void MyMesh::pushPostToClient(ClientInfo *client, PostInfo &post) {
+  MESH_DEBUG_PRINTLN("room.post: pushPostToClient text=%s", post.text);
  int len = 0;
  memcpy(&reply_data[len], &post.post_timestamp, 4);
  len += 4; // this is a PAST timestamp... but should be accepted by client
@@ -148,7 +157,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
  if (payload[0] == REQ_TYPE_GET_STATUS) {
    ServerStats stats;
    stats.batt_milli_volts = board.getBattMilliVolts();
-    stats.curr_tx_queue_len = _mgr->getOutboundCount(0xFFFFFFFF);
+    stats.curr_tx_queue_len = _mgr->getOutboundTotal();
    stats.noise_floor = (int16_t)_radio->getNoiseFloor();
    stats.last_rssi = (int16_t)radio_driver.getLastRSSI();
    stats.n_packets_recv = radio_driver.getPacketsRecv();
@@ -209,28 +218,14 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t

 void MyMesh::logRxRaw(float snr, float rssi, const uint8_t raw[], int len) {
 #if MESH_PACKET_LOGGING
-  if (Serial.availableForWrite() > 0) {
-    Serial.print(getLogDateTime());
-    Serial.print(" RAW: ");
-    mesh::Utils::printHex(Serial, raw, len);
-    Serial.println();
-  }
-#endif
-
-#ifdef WITH_MQTT_BRIDGE
-  if (_prefs.bridge_enabled) {
-    // Store raw radio data for MQTT messages (same as repeater)
-    if (bridge) bridge->storeRawRadioData(raw, len, snr, rssi);
-  }
+  Serial.print(getLogDateTime());
+  Serial.print(" RAW: ");
+  mesh::Utils::printHex(Serial, raw, len);
+  Serial.println();
 #endif
 }

 void MyMesh::logRx(mesh::Packet *pkt, int len, float score) {
-#ifdef WITH_MQTT_BRIDGE
-  // MQTT bridge: always feed RX packets — bridge decides based on mqtt.rx setting
-  if (_prefs.bridge_enabled && bridge) bridge->onPacketReceived(pkt);
-#endif
-
  if (_logging) {
    File f = openAppend(PACKET_LOG_FILE);
    if (f) {
@@ -250,11 +245,6 @@ void MyMesh::logRx(mesh::Packet *pkt, int len, float score) {
  }
 }
 void MyMesh::logTx(mesh::Packet *pkt, int len) {
-#ifdef WITH_MQTT_BRIDGE
-  // MQTT bridge: always feed TX packets — bridge decides based on mqtt.tx setting
-  if (_prefs.bridge_enabled && bridge) bridge->sendPacket(pkt);
-#endif
-
  if (_logging) {
    File f = openAppend(PACKET_LOG_FILE);
    if (f) {
@@ -307,80 +297,11 @@ uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
  return getRNG()->nextInt(0, 5*t + 1);
 }

-bool MyMesh::allowDirectRetry(const mesh::Packet* packet, const uint8_t* next_hop_hash,
-                              uint8_t next_hop_hash_len) const {
-  (void)packet;
-  (void)next_hop_hash;
-  (void)next_hop_hash_len;
-  return _prefs.direct_retry_enabled != 0;
-}
-
-void MyMesh::configureDirectRetryPacket(mesh::Packet* retry, const mesh::Packet* original,
-                                        uint8_t retry_attempt) {
-  if (!_prefs.direct_retry_cr_enabled) {
-    if (retry != NULL) retry->tx_cr = 0;
-    return;
-  }
-  mesh::Mesh::configureDirectRetryPacket(retry, original, retry_attempt);
-}
-
-uint32_t MyMesh::getDirectRetryEchoDelay(const mesh::Packet* packet) const {
-  uint32_t base_ms = constrain((uint32_t)_prefs.direct_retry_base_ms, (uint32_t)10, (uint32_t)5000);
-  return base_ms + getDirectRetryPacketAirtimeDelay(packet);
-}
-
-uint8_t MyMesh::getDirectRetryMaxAttempts(const mesh::Packet* packet) const {
-  if (packet != NULL && packet->getPayloadType() == PAYLOAD_TYPE_TXT_MSG) return 21;
-  return constrain(_prefs.direct_retry_attempts, 1, 15);
-}
-
-uint32_t MyMesh::getDirectRetryAttemptDelay(const mesh::Packet* packet, uint8_t attempt_idx) {
-  uint32_t step_ms = constrain((uint32_t)_prefs.direct_retry_step_ms, (uint32_t)0, (uint32_t)5000);
-  return getDirectRetransmitDelay(packet) + getDirectRetryEchoDelay(packet)
-      + ((uint32_t)attempt_idx * step_ms);
-}
-
-bool MyMesh::allowFloodRetry(const mesh::Packet* packet) const {
-  if (_prefs.disable_fwd || _prefs.flood_retry_attempts == 0) return false;
-  return packet == NULL || packet->getPayloadType() != PAYLOAD_TYPE_ADVERT
-      || _prefs.flood_retry_advert_enabled;
-}
-
-uint8_t MyMesh::getFloodRetryMaxPathLength(const mesh::Packet* packet) const {
-  uint8_t general_gate = _prefs.flood_retry_max_path == FLOOD_RETRY_PATH_GATE_DISABLED
-      ? FLOOD_RETRY_PATH_GATE_DISABLED
-      : constrain(_prefs.flood_retry_max_path, 0, 63);
-  uint8_t group_data_gate = _prefs.flood_retry_group_max_path == FLOOD_RETRY_PATH_GATE_DISABLED
-      ? FLOOD_RETRY_PATH_GATE_DISABLED
-      : constrain(_prefs.flood_retry_group_max_path, 0, 63);
-  return applyGroupDataFloodRetryPathGate(packet, general_gate, group_data_gate);
-}
-
-uint8_t MyMesh::getFloodRetryMaxAttempts(const mesh::Packet* packet) const {
-  if (_prefs.disable_fwd) return 0;
-
-  uint8_t attempts = constrain(_prefs.flood_retry_attempts, 0, 15);
-  uint16_t scaled_attempts = attempts;
-  uint8_t hops = packet != NULL ? packet->getPathHashCount() : 0;
-  if (hops == 0) {
-    scaled_attempts = (uint16_t)attempts * 2U;
-  } else if (hops == 1) {
-    scaled_attempts = (((uint16_t)attempts * 3U) + 1U) / 2U;
-  }
-  return scaled_attempts > 15 ? 15 : (uint8_t)scaled_attempts;
-}
-
-void MyMesh::onRetryConfigChanged() {
-  if (!_prefs.direct_retry_enabled) cancelAllDirectRetries();
-  if (_prefs.disable_fwd || _prefs.flood_retry_attempts == 0) cancelAllFloodRetries();
-}
-
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
  if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood()) {
-    if (packet->getPathHashCount() >= _prefs.flood_max) return false;
-    if (packet->getRouteType() == ROUTE_TYPE_FLOOD && packet->getPathHashCount() >= _prefs.flood_max_unscoped) return false;
-    if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->getPathHashCount() >= _prefs.flood_max_advert) return false;
+  if (packet->isRouteFlood()
+      && mesh::isFloodHopLimitExceeded(packet, _prefs.flood_max, _prefs.flood_max_unscoped, _prefs.flood_max_advert)) {
+    return false;
  }
  return true;
 }
@@ -435,10 +356,6 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
      }

      client = acl.putClient(sender, 0);  // add to known clients (if not already known)
-      if (client == NULL) {
-        MESH_DEBUG_PRINTLN("Login rejected: ACL is full of protected contacts");
-        return;
-      }
      if (sender_timestamp <= client->last_timestamp) {
        MESH_DEBUG_PRINTLN("possible replay attack!");
        return;
@@ -712,13 +629,10 @@ void MyMesh::onAckRecv(mesh::Packet *packet, uint32_t ack_crc) {

 MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondClock &ms, mesh::RNG &rng,
               mesh::RTCClock &rtc, mesh::MeshTables &tables)
-    : mesh::Mesh(radio, ms, rng, rtc, *createObserverPacketManager(32), tables),
+    : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
      region_map(key_store), temp_map(key_store),
      _cli(board, rtc, sensors, region_map, acl, &_prefs, this),
      telemetry(MAX_PACKET_PAYLOAD - 4)
-#ifdef WITH_MQTT_BRIDGE
-      , bridge(nullptr)
-#endif
 {
  last_millis = 0;
  uptime_millis = 0;
@@ -727,16 +641,10 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _logging = false;
  region_load_active = false;
  set_radio_at = revert_radio_at = 0;
-  active_cr = LORA_CR;
-  temp_radio_applied = false;
-  saved_radio_apply_pending = false;
-  radio_apply_retry_at = 0;
-  radio_apply_failures = 0;
  recv_pkt_region = NULL;

  // defaults
-  memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;   // one half
+  _prefs.airtime_factor = 1.0;
  _prefs.rx_delay_base = 0.0f;   // off by default, was 10.0
  _prefs.tx_delay_factor = 0.5f; // was 0.25f;
  _prefs.direct_tx_delay_factor = 0.2f; // was zero
@@ -755,13 +663,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.flood_max = 64;
  _prefs.flood_max_unscoped = 64;
  _prefs.flood_max_advert = 8;
-  _prefs.flood_channel_data_enabled = 1;
-  _prefs.flood_retry_group_max_path = FLOOD_RETRY_GROUP_MAX_PATH_DEFAULT;
  _prefs.interference_threshold = 0; // disabled
-  _prefs.radio_fem_rxgain = 1;       // LoRa FEM RX gain on by default (FEM boards)
  _prefs.cad_enabled = 0;            // hardware CAD before TX (off by default; 'set cad on')
-  _prefs.rx_ps_rx_us = RX_POWERSAVING_DEFAULT_RX_US;
-  _prefs.rx_ps_sleep_us = RX_POWERSAVING_DEFAULT_SLEEP_US;
 #ifdef ROOM_PASSWORD
  StrHelper::strncpy(_prefs.guest_password, ROOM_PASSWORD, sizeof(_prefs.guest_password));
 #endif
@@ -770,19 +673,16 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.gps_enabled = 0;
  _prefs.gps_interval = 0;
  _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+#ifdef SX126X_RX_BOOSTED_GAIN
+  _prefs.rx_boosted_gain = SX126X_RX_BOOSTED_GAIN;
+#else
+  _prefs.rx_boosted_gain = 1; // enabled by default;
+#endif
+#endif
  _prefs.radio_fem_rxgain = 1;
-
-  // Observer defaults (alert.*, etc.) moved to applyMQTTDefaults() — they live
-  // in /mqtt_prefs now, not NodePrefs.
-
-  // bridge defaults (same as repeater)
-  _prefs.bridge_enabled = 1;    // enabled
-  _prefs.bridge_delay   = 500;  // milliseconds
-  _prefs.bridge_pkt_src = 1;    // logRx (RX packets)
-  _prefs.bridge_baud = 115200;  // baud rate
-  _prefs.bridge_channel = 1;    // channel 1
-
-  // MQTT/WiFi/timezone defaults live in /mqtt_prefs now (see applyMQTTDefaults).
+  _prefs.radio_fem_txgain = 0;

  next_post_idx = 0;
  next_client_idx = 0;
@@ -822,12 +722,11 @@ void MyMesh::begin(FILESYSTEM *fs) {
    }
  }

-  saved_radio_apply_pending = !applySavedRadioParams();
-  if (!saved_radio_apply_pending) {
-    radio_driver.setTxPower(_prefs.tx_power_dbm);
-  }
-  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);   // LoRa FEM LNA (FEM boards only)
-  setRxPowerSaving(_prefs.rx_powersaving_enabled, _prefs.rx_ps_rx_us, _prefs.rx_ps_sleep_us);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
+  radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);

  updateAdvertTimer();
  updateFloodAdvertTimer();
@@ -837,64 +736,6 @@ void MyMesh::begin(FILESYSTEM *fs) {
 #if ENV_INCLUDE_GPS == 1
  applyGpsPrefs();
 #endif
-#ifdef WITH_MQTT_BRIDGE
-  if (_prefs.bridge_enabled) {
-    // Defer construction to avoid static init crashes on ESP32 classic
-    MQTTNodeInfo node_info;
-    node_info.node_name = _prefs.node_name;
-    node_info.freq = &_prefs.freq;
-    node_info.bw = &_prefs.bw;
-    node_info.sf = &_prefs.sf;
-    node_info.cr = &_prefs.cr;
-    node_info.repeat_flag = &_prefs.disable_fwd;
-    node_info.repeat_when_nonzero = false;
-    bridge = new MQTTBridge(node_info, _cli.getObserverPrefs(),
-                            getRTCClock(), &self_id);
-    if (bridge) {
-      // Set device public key for MQTT topics
-      char device_id[65];
-      mesh::LocalIdentity self_id = getSelfId();
-      mesh::Utils::toHex(device_id, self_id.pub_key, PUB_KEY_SIZE);
-      MESH_DEBUG_PRINTLN("Setting device ID: %s", device_id);
-      bridge->setDeviceID(device_id);
-
-      // Set firmware version
-      bridge->setFirmwareVersion(getFirmwareVer());
-
-      // Set board model
-      bridge->setBoardModel(_cli.getBoard()->getManufacturerName());
-
-      // Set build date
-      bridge->setBuildDate(getBuildDate());
-
-      // Set stats sources for automatic stats collection
-      bridge->setStatsSources(this, _radio, _cli.getBoard(), _ms);
-
-      bridge->begin();
-    }
-  }
-#endif
-
-  // Wire fault-alert reporter. begin() is safe regardless of bridge state.
-  // Passing `this` as the callbacks lets the reporter resolve a TransportKey
-  // scope (alert.region override, falling back to default_scope) so alert
-  // floods ride the same scope as adverts/channel messages.
-#ifdef WITH_MQTT_BRIDGE
-  _alerter.begin(&_prefs, _cli.getObserverPrefs(), this, this);
-  _alerter.setBridge(bridge);
-#endif
-}
-
-bool MyMesh::applySavedRadioParams() {
-  uint32_t timings[2] = {_prefs.rx_ps_rx_us, _prefs.rx_ps_sleep_us};
-  const uint32_t* applied_timings = _prefs.rx_powersaving_enabled
-      && radio_driver.supportsRxPowerSaving() ? timings : NULL;
-  if (!radio_driver.setParams(
-        _prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr, applied_timings)) {
-    return false;
-  }
-  active_cr = _prefs.cr;
-  return true;
 }

 void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size) {
@@ -908,40 +749,28 @@ void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint3
  }
 }

-bool MyMesh::resolveAlertScope(TransportKey& dest) {
-  // Same resolution policy as simple_repeater: alert.region > default_scope.
-#ifdef WITH_MQTT_BRIDGE
-  const char* alert_region = _cli.getObserverPrefs()->alert_region;
-  if (alert_region[0]) {
-    auto r = region_map.findByNamePrefix(alert_region);
-    if (r && region_map.getTransportKeysFor(*r, &dest, 1) > 0 && !dest.isNull()) {
-      return true;
-    }
-  }
-#endif
-  if (!default_scope.isNull()) {
-    dest = default_scope;
-    return true;
-  }
-  return false;
-}
-
 void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size) {
-  if (recv_pkt_region && !recv_pkt_region->isWildcard()) {  // if _request_ packet scope is known, send reply with same scope
-    TransportKey scope;
-    if (region_map.getTransportKeysFor(*recv_pkt_region, &scope, 1) > 0) {
-      sendFloodScoped(scope, packet, delay_millis, path_hash_size);
-    } else {
+  TransportKey req_scope;
+  bool is_wildcard = recv_pkt_region != NULL && recv_pkt_region->isWildcard();
+  bool req_scope_known = recv_pkt_region != NULL && !is_wildcard
+                      && region_map.getTransportKeysFor(*recv_pkt_region, &req_scope, 1) > 0;
+
+  switch (mesh::chooseReplyScope(req_scope_known, is_wildcard, !default_scope.isNull())) {
+    case mesh::REPLY_SCOPE_REQUEST:
+      sendFloodScoped(req_scope, packet, delay_millis, path_hash_size);   // reply with same scope as request
+      break;
+    case mesh::REPLY_SCOPE_DEFAULT:
+      // requester's scope is unknown: DIRECT request (no transport codes), or code matched no Region.
+      // un-scoped would be dropped at hop 0 by repeaters running flood.max.unscoped=0
+      sendFloodScoped(default_scope, packet, delay_millis, path_hash_size);
+      break;
+    case mesh::REPLY_SCOPE_NONE:
      sendFlood(packet, delay_millis, path_hash_size);   // send un-scoped
-    }
-  } else {
-    sendFlood(packet, delay_millis, path_hash_size);   // send un-scoped
+      break;
  }
 }

 void MyMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) {
-  radio_apply_retry_at = 0;
-  radio_apply_failures = 0;
  set_radio_at = futureMillis(2000); // give CLI reply some time to be sent back, before applying temp radio params
  pending_freq = freq;
  pending_bw = bw;
@@ -979,7 +808,7 @@ void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) {

 void MyMesh::updateAdvertTimer() {
  if (_prefs.advert_interval > 0) { // schedule local advert timer
-    next_local_advert = futureMillis((int)((uint32_t)_prefs.advert_interval * 2 * 60 * 1000));
+    next_local_advert = futureMillis((uint32_t)_prefs.advert_interval * 2 * 60 * 1000);
  } else {
    next_local_advert = 0; // stop the timer
  }
@@ -1012,14 +841,9 @@ void MyMesh::setTxPower(int8_t power_dbm) {
  radio_driver.setTxPower(power_dbm);
 }

-bool MyMesh::setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) {
-  return radio_driver.setRxPowerSaving(enable, rx_us, sleep_us);
+bool MyMesh::setRxBoostedGain(bool enable) {
+  return radio_driver.setRxBoostedGainMode(enable);
 }
-void MyMesh::getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) {
-  *soft = radio_driver.getRxPsWatchdogSoftCount();
-  *hard = radio_driver.getRxPsWatchdogHardCount();
-}
-

 void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -1075,19 +899,10 @@ void MyMesh::formatPacketStatsReply(char *reply) {
 void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply) {
  if (region_load_active) {
    if (StrHelper::isBlank(command)) {  // empty/blank line, signal to terminate 'load' operation
+      region_map = temp_map;  // copy over the temp instance as new current map
      region_load_active = false;
-      // resetFrom() preserves the selected IDs. Reject a replacement that
-      // omitted either selected region instead of leaving a dangling ID.
-      bool missing_default = region_map.getDefaultRegion() != NULL
-          && temp_map.getDefaultRegion() == NULL;
-      bool missing_home = region_map.getHomeRegion() != NULL
-          && temp_map.getHomeRegion() == NULL;
-      if (!missing_default && !missing_home) {
-        region_map = temp_map;
-        sprintf(reply, "OK - loaded %d regions", region_map.getCount());
-      } else {
-        strcpy(reply, "Err - invalid region map; previous map retained");
-      }
+
+      sprintf(reply, "OK - loaded %d regions", region_map.getCount());
    } else {
      char *np = command;
      while (*np == ' ') np++;   // skip indent
@@ -1132,14 +947,13 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
    if (sp == NULL) {
      strcpy(reply, "Err - bad params");
    } else {
-      size_t hex_len = (size_t)(sp - hex);
      *sp++ = 0;   // replace space with null terminator

      uint8_t pubkey[PUB_KEY_SIZE];
-      if (hex_len > 0 && hex_len <= PUB_KEY_SIZE * 2 && (hex_len & 1) == 0
-          && mesh::Utils::fromHex(pubkey, (int)(hex_len / 2), hex)) {
+      int hex_len = min(sp - hex, PUB_KEY_SIZE*2);
+      if (mesh::Utils::fromHex(pubkey, hex_len / 2, hex)) {
        uint8_t perms = atoi(sp);
-        if (acl.applyPermissions(self_id, pubkey, (int)(hex_len / 2), perms)) {
+        if (acl.applyPermissions(self_id, pubkey, hex_len / 2, perms)) {
          dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);   // trigger acl.save()
          strcpy(reply, "OK");
        } else {
@@ -1160,6 +974,15 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
      Serial.printf("\n");
    }
    reply[0] = 0;
+  } else if (strncmp(command, "room.post", 9) == 0) {
+    char* msg = command + 9;
+    while (*msg == ' ') msg++;
+    if (*msg == 0) {
+      snprintf(reply, MAX_POST_TEXT_LEN, "ERR empty message");
+    } else {
+      addSystemPost(msg);
+      snprintf(reply, MAX_POST_TEXT_LEN, "OK");
+    }
  } else{
    _cli.handleCommand(sender_timestamp, command, reply);  // common CLI commands
  }
@@ -1170,12 +993,7 @@ bool MyMesh::saveFilter(ClientInfo* client) {
 }

 void MyMesh::loop() {
-  // Check radio FIRST to ensure we don't miss incoming packets
-  // MQTT processing can take time, so we prioritize radio reception
  mesh::Mesh::loop();
-#ifdef WITH_MQTT_BRIDGE
-  // bridge.loop() is now handled by FreeRTOS task on Core 0 - no need to call it here
-#endif

  if (millisHasNowPassed(next_push) && acl.getNumClients() > 0) {
    // check for ACK timeouts
@@ -1234,73 +1052,16 @@ void MyMesh::loop() {
    updateAdvertTimer(); // schedule next local advert
  }

-  const bool revert_radio_due = revert_radio_at && millisHasNowPassed(revert_radio_at);
-  const bool radio_apply_ready = !radio_apply_retry_at || millisHasNowPassed(radio_apply_retry_at);
-  bool radio_apply_failed = false;
-  if (revert_radio_due && !temp_radio_applied) {
-    // The temporary window ended before it could be applied. Drop both timers
-    // so a previously busy radio cannot switch to the expired channel later.
-    set_radio_at = revert_radio_at = 0;
-    radio_apply_retry_at = 0;
-    radio_apply_failures = 0;
-    MESH_DEBUG_PRINTLN("Temp radio params expired before apply");
-  } else if (revert_radio_due && !hasOutbound() && radio_apply_ready) {
-    if (applySavedRadioParams()) {
-      if (saved_radio_apply_pending) {
-        radio_driver.setTxPower(_prefs.tx_power_dbm);
-      }
-      set_radio_at = revert_radio_at = 0;
-      temp_radio_applied = false;
-      saved_radio_apply_pending = false;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-      MESH_DEBUG_PRINTLN("Radio params restored");
-    } else {
-      radio_apply_failed = true;
-    }
-  } else if (set_radio_at && millisHasNowPassed(set_radio_at) && !hasOutbound()
-             && radio_apply_ready) {
-    uint32_t rx_us = _prefs.rx_ps_rx_us;
-    uint32_t sleep_us = _prefs.rx_ps_sleep_us;
-    bool timing_ok = true;
-    if (_prefs.rx_powersaving_enabled && _prefs.rx_ps_level != 0) {
-      uint32_t preamble = _prefs.rx_ps_preamble ? _prefs.rx_ps_preamble
-                                                : (pending_sf <= 8 ? 32UL : 16UL);
-      timing_ok = CommonCLI::calculateRxPowerSavingLevel(
-          _prefs.rx_ps_level, pending_sf, pending_bw, preamble, &rx_us, &sleep_us);
-    }
-    uint32_t timings[2] = {rx_us, sleep_us};
-    const uint32_t* applied_timings = _prefs.rx_powersaving_enabled
-        && radio_driver.supportsRxPowerSaving() ? timings : NULL;
-    if (timing_ok && radio_driver.setParams(
-          pending_freq, pending_bw, pending_sf, pending_cr, applied_timings)) {
-      set_radio_at = 0;
-      active_cr = pending_cr;
-      temp_radio_applied = true;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-      MESH_DEBUG_PRINTLN("Temp radio params");
-    } else {
-      // A failed setParams() may have applied only a prefix of the tuple.
-      // Ensure expiry restores the complete saved configuration.
-      saved_radio_apply_pending = true;
-      radio_apply_failed = true;
-    }
+  if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params
+    set_radio_at = 0;                                     // clear timer
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
+    MESH_DEBUG_PRINTLN("Temp radio params");
  }

-  if (saved_radio_apply_pending && !temp_radio_applied && !hasOutbound()
-      && radio_apply_ready && !radio_apply_failed) {
-    if (applySavedRadioParams()) {
-      radio_driver.setTxPower(_prefs.tx_power_dbm);
-      saved_radio_apply_pending = false;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-    } else {
-      radio_apply_failed = true;
-    }
-  }
-  if (radio_apply_failed) {
-    radio_apply_retry_at = futureMillis(nextRadioApplyRetryDelay(radio_apply_failures));
+  if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig
+    revert_radio_at = 0;                                        // clear timer
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    MESH_DEBUG_PRINTLN("Radio params restored");
  }

  // is pending dirty contacts write needed?
@@ -1315,74 +1076,4 @@ void MyMesh::loop() {
  uint32_t now = millis();
  uptime_millis += now - last_millis;
  last_millis = now;
-
-#ifdef WITH_MQTT_BRIDGE
-  _alerter.onLoop(now);
-#endif
-}
-
-bool MyMesh::isMillisTimerDue(unsigned long timestamp) const {
-  return timestamp && millisHasNowPassed(timestamp);
-}
-
-uint32_t MyMesh::limitSleepToMillisTimer(unsigned long timestamp, uint32_t sleep_secs) const {
-  if (!timestamp || sleep_secs == 0) {
-    return sleep_secs;
-  }
-  unsigned long now = millis();
-  if ((long)(now - timestamp) >= 0) {
-    return 0;
-  }
-  unsigned long remaining_ms = timestamp - now;
-  uint32_t remaining_secs = (remaining_ms + 999UL) / 1000UL;
-  return remaining_secs < sleep_secs ? remaining_secs : sleep_secs;
-}
-
-uint32_t MyMesh::getPowerSaveSleepSeconds(uint32_t max_secs) const {
-  if (max_secs == 0 || hasPendingWork()) {
-    return 0;
-  }
-
-  uint32_t sleep_secs = max_secs;
-  uint32_t queue_delay_ms;
-  if (getNextQueueWakeDelay(queue_delay_ms)) {
-    uint32_t queue_delay_secs = (queue_delay_ms + 999UL) / 1000UL;
-    if (queue_delay_secs < sleep_secs) sleep_secs = queue_delay_secs;
-  }
-  uint32_t retry_delay_ms;
-  if (getNextRetryWakeDelay(retry_delay_ms)) {
-    uint32_t retry_delay_secs = (retry_delay_ms + 999UL) / 1000UL;
-    if (retry_delay_secs < sleep_secs) sleep_secs = retry_delay_secs;
-  }
-  if (acl.getNumClients() > 0) {
-    sleep_secs = limitSleepToMillisTimer(next_push, sleep_secs);
-  }
-  sleep_secs = limitSleepToMillisTimer(next_flood_advert, sleep_secs);
-  sleep_secs = limitSleepToMillisTimer(next_local_advert, sleep_secs);
-  const bool radio_apply_backoff = radio_apply_retry_at && !millisHasNowPassed(radio_apply_retry_at);
-  if (radio_apply_backoff) {
-    sleep_secs = limitSleepToMillisTimer(radio_apply_retry_at, sleep_secs);
-  } else {
-    sleep_secs = limitSleepToMillisTimer(set_radio_at, sleep_secs);
-    sleep_secs = limitSleepToMillisTimer(revert_radio_at, sleep_secs);
-  }
-  sleep_secs = limitSleepToMillisTimer(dirty_contacts_expiry, sleep_secs);
-  return sleep_secs;
-}
-
-// To check if there is pending work
-bool MyMesh::hasPendingWork() const {
-#if defined(WITH_BRIDGE)
-  if (bridge && bridge->isRunning()) return true; // bridge needs WiFi radio, can't sleep
-#endif
-  if (radio_driver.isWatchdogObserving()) return true; // keep MCU awake for one radio duty cycle
-  if (radio_driver.isCalibratingNoiseFloor()) return true; // keep MCU awake for the noise-floor window
-  if (hasQueuedWorkDue() || hasRetryWorkDue()) return true;
-  if (acl.getNumClients() > 0 && isMillisTimerDue(next_push)) return true;
-  if (isMillisTimerDue(next_flood_advert) || isMillisTimerDue(next_local_advert)) return true;
-  const bool radio_apply_backoff = radio_apply_retry_at && !isMillisTimerDue(radio_apply_retry_at);
-  if (!radio_apply_backoff
-      && (isMillisTimerDue(set_radio_at) || isMillisTimerDue(revert_radio_at)
-          || (saved_radio_apply_pending && !temp_radio_applied))) return true;
-  return isMillisTimerDue(dirty_contacts_expiry);
 }
@@ -16,28 +16,23 @@
 #include <helpers/SimpleMeshTables.h>
 #include <helpers/IdentityStore.h>
 #include <helpers/AdvertDataHelpers.h>
-#include <helpers/AlertReporter.h>
 #include <helpers/TxtDataHelpers.h>
 #include <helpers/CommonCLI.h>
 #include <helpers/StatsFormatHelper.h>
 #include <helpers/ClientACL.h>
 #include <helpers/RegionMap.h>
+#include <helpers/RoutingPolicy.h>
 #include <RTClib.h>
 #include <target.h>

-#ifdef WITH_MQTT_BRIDGE
-#include "helpers/bridges/MQTTBridge.h"
-#define WITH_BRIDGE
-#endif
-
 /* ------------------------------ Config -------------------------------- */

 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "6 Jun 2026"
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif

 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif

 #ifndef LORA_FREQ
@@ -122,21 +117,10 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
  float pending_bw;
  uint8_t pending_sf;
  uint8_t pending_cr;
-  uint8_t active_cr;
-  bool temp_radio_applied;
-  bool saved_radio_apply_pending;
-  unsigned long radio_apply_retry_at;
-  uint8_t radio_apply_failures;
  int  matching_peer_indexes[MAX_CLIENTS];
-#ifdef WITH_MQTT_BRIDGE
-  MQTTBridge* bridge;
-#endif
-#ifdef WITH_MQTT_BRIDGE
-  AlertReporter _alerter;
-#endif

  void addPost(ClientInfo* client, const char* postData);
-  bool applySavedRadioParams();
+  void storePost(const mesh::Identity& author, const char* postData);
  void pushPostToClient(ClientInfo* client, PostInfo& post);
  uint8_t getUnsyncedCount(ClientInfo* client);
  bool processAck(const uint8_t *data);
@@ -145,11 +129,6 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
  int handleRequest(ClientInfo* sender, uint32_t sender_timestamp, uint8_t* payload, size_t payload_len);

 protected:
-#if defined(ENABLE_OTA)
-  bool isTempRadioActive() const override {
-    return temp_radio_applied && revert_radio_at != 0 && !millisHasNowPassed(revert_radio_at);
-  }
-#endif
  float getAirtimeBudgetFactor() const override {
    return _prefs.airtime_factor;
  }
@@ -163,19 +142,6 @@ protected:
  const char* getLogDateTime() override;
  uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
-  bool allowDirectRetry(const mesh::Packet* packet, const uint8_t* next_hop_hash,
-                        uint8_t next_hop_hash_len) const override;
-  void configureDirectRetryPacket(mesh::Packet* retry, const mesh::Packet* original,
-                                  uint8_t retry_attempt) override;
-  uint32_t getDirectRetryEchoDelay(const mesh::Packet* packet) const override;
-  uint8_t getDirectRetryMaxAttempts(const mesh::Packet* packet) const override;
-  uint32_t getDirectRetryAttemptDelay(const mesh::Packet* packet, uint8_t attempt_idx) override;
-  bool allowFloodRetry(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxPathLength(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxAttempts(const mesh::Packet* packet) const override;
-
-  bool supportsBasicRetryConfig() const override { return true; }
-  void onRetryConfigChanged() override;

  int getInterferenceThreshold() const override {
    return _prefs.interference_threshold;
@@ -189,9 +155,6 @@ protected:
  uint8_t getExtraAckTransmitCount() const override {
    return _prefs.multi_acks;
  }
-  uint8_t getDefaultTxCodingRate() const override {
-    return active_cr;
-  }

  mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;

@@ -215,6 +178,7 @@ public:
  MyMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables);

  void begin(FILESYSTEM* fs);
+  void addSystemPost(const char* postData);

  const char* getFirmwareVer() override { return FIRMWARE_VERSION; }
  const char* getBuildDate() override { return FIRMWARE_BUILD_DATE; }
@@ -232,12 +196,6 @@ public:

  // CommonCLICallbacks
  void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override;
-
-#ifdef WITH_MQTT_BRIDGE
-  void onAlertConfigChanged() override { _alerter.onConfigChanged(); }
-  bool sendAlertText(const char* text) override { return _alerter.sendText(text); }
-#endif
-  bool resolveAlertScope(TransportKey& dest) override;
  bool formatFileSystem() override;
  void sendSelfAdvertisement(int delay_millis, bool flood) override;
  void updateAdvertTimer() override;
@@ -251,8 +209,7 @@ public:

  void dumpLogFile() override;
  void setTxPower(int8_t power_dbm) override;
-  bool setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) override;
-  void getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) override;
+  bool setRxBoostedGain(bool enable) override;

  void formatNeighborsReply(char *reply) override {
    strcpy(reply, "not supported");
@@ -272,101 +229,4 @@ public:
  void clearStats() override;
  void handleCommand(uint32_t sender_timestamp, char* command, char* reply);
  void loop();
-
-#if defined(WITH_BRIDGE)
-  void setBridgeState(bool enable) override {
-    if (!bridge) {
-#ifdef WITH_MQTT_BRIDGE
-      MQTTNodeInfo node_info;
-      node_info.node_name = _prefs.node_name;
-      node_info.freq = &_prefs.freq;
-      node_info.bw = &_prefs.bw;
-      node_info.sf = &_prefs.sf;
-      node_info.cr = &_prefs.cr;
-      node_info.repeat_flag = &_prefs.disable_fwd;
-      node_info.repeat_when_nonzero = false;
-      bridge = new MQTTBridge(node_info, _cli.getObserverPrefs(),
-                              getRTCClock(), &self_id);
-#endif
-      if (!bridge) return;
-    }
-    if (enable == bridge->isRunning()) return;
-    if (enable)
-    {
-      char device_id[65];
-      mesh::LocalIdentity self_id = getSelfId();
-      mesh::Utils::toHex(device_id, self_id.pub_key, PUB_KEY_SIZE);
-      bridge->setDeviceID(device_id);
-      bridge->setFirmwareVersion(getFirmwareVer());
-      bridge->setBoardModel(_cli.getBoard()->getManufacturerName());
-      bridge->setBuildDate(getBuildDate());
-#ifdef WITH_MQTT_BRIDGE
-      bridge->setStatsSources(this, _radio, _cli.getBoard(), _ms);
-#endif
-      bridge->begin();
-#ifdef WITH_MQTT_BRIDGE
-      _alerter.setBridge(bridge);
-#endif
-    }
-    else
-    {
-      bridge->end();
-#ifdef WITH_MQTT_BRIDGE
-      _alerter.setBridge(nullptr);
-#endif
-    }
-  }
-
-  void restartBridge() override {
-    if (!bridge || !bridge->isRunning()) return;
-    bridge->end();
-    char device_id[65];
-    mesh::LocalIdentity self_id = getSelfId();
-    mesh::Utils::toHex(device_id, self_id.pub_key, PUB_KEY_SIZE);
-    bridge->setDeviceID(device_id);
-    bridge->setFirmwareVersion(getFirmwareVer());
-    bridge->setBoardModel(_cli.getBoard()->getManufacturerName());
-    bridge->setBuildDate(getBuildDate());
-#ifdef WITH_MQTT_BRIDGE
-    bridge->setStatsSources(this, _radio, _cli.getBoard(), _ms);
-#endif
-    bridge->begin();
-  }
-
-  void restartBridgeSlot(int slot) override {
-#ifdef WITH_MQTT_BRIDGE
-    if (!bridge || !bridge->isRunning()) return;
-    bridge->setSlotPreset(slot, _cli.getObserverPrefs()->mqtt_slot_preset[slot]);
-#else
-    (void)slot;
-#endif
-  }
-
-  int getQueueSize() override {
-    return bridge ? bridge->getQueueSize() : 0;
-  }
-
-  bool isMqttBridgeRunning() override {
-    return bridge && bridge->isRunning();
-  }
-
-  bool syncMqttNtp() override {
-    if (!bridge || !bridge->isRunning()) return false;
-    // Marshal onto the MQTT task (Core 0); this runs on the CLI thread (Core 1).
-    return bridge->requestForcedNtpSync();
-  }
-
-  bool runMqttNtpDiag(char* reply, size_t reply_size, bool verbose) override {
-    if (!bridge || !bridge->isRunning()) return false;
-    return bridge->ntpDiag(reply, reply_size, verbose);
-  }
-#endif
-  uint32_t getPowerSaveSleepSeconds(uint32_t max_secs) const;
-
-  // To check if there is pending work
-  bool hasPendingWork() const;
-
-private:
-  bool isMillisTimerDue(unsigned long timestamp) const;
-  uint32_t limitSleepToMillisTimer(unsigned long timestamp, uint32_t sleep_secs) const;
 };
@@ -6,10 +6,6 @@
 #define USER_BTN_PRESSED LOW
 #endif

-#ifdef WITH_MQTT_BRIDGE
-#include <WiFi.h>
-#endif
-
 #define AUTO_OFF_MILLIS      20000  // 20 seconds
 #define BOOT_SCREEN_MILLIS   4000   // 4 seconds

@@ -53,20 +49,19 @@ void UITask::renderCurrScreen() {
  char tmp[80];
  if (millis() < BOOT_SCREEN_MILLIS) { // boot screen
    // meshcore logo
-    _display->setColor(DisplayDriver::BLUE);
+    _display->setColor(UIColor::corp_blue);
    int logoWidth = 128;
    _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);

    // meshcore website
    const char* website = "https://meshcore.io";
-    _display->setColor(DisplayDriver::LIGHT);
+    _display->setColor(UIColor::primary_txt);
    _display->setTextSize(1);
    uint16_t websiteWidth = _display->getTextWidth(website);
    _display->setCursor((_display->width() - websiteWidth) / 2, 22);
    _display->print(website);

    // version info
-    _display->setColor(DisplayDriver::LIGHT);
    _display->setTextSize(1);
    uint16_t versionWidth = _display->getTextWidth(_version_info);
    _display->setCursor((_display->width() - versionWidth) / 2, 35);
@@ -81,12 +76,11 @@ void UITask::renderCurrScreen() {
    // node name
    _display->setCursor(0, 0);
    _display->setTextSize(1);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::primary_txt);
    _display->print(_node_prefs->node_name);

    // freq / sf
    _display->setCursor(0, 20);
-    _display->setColor(DisplayDriver::YELLOW);
    sprintf(tmp, "FREQ: %06.3f SF%d", _node_prefs->freq, _node_prefs->sf);
    _display->print(tmp);

@@ -94,17 +88,6 @@ void UITask::renderCurrScreen() {
    _display->setCursor(0, 30);
    sprintf(tmp, "BW: %03.2f CR: %d", _node_prefs->bw, _node_prefs->cr);
    _display->print(tmp);
-
-#ifdef WITH_MQTT_BRIDGE
-    // Display IP address for MQTT bridge devices
-    if (WiFi.status() == WL_CONNECTED) {
-      IPAddress ip = WiFi.localIP();
-      _display->setCursor(0, 40);
-      _display->setColor(DisplayDriver::LIGHT);
-      snprintf(tmp, sizeof(tmp), "IP: %d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
-      _display->print(tmp);
-    }
-#endif
  }
 }

@@ -3,6 +3,11 @@

 #include "MyMesh.h"

+#ifdef ETHERNET_ENABLED
+  #define ETHERNET_CLI_BANNER "MeshCore Room Server CLI"
+  #include <helpers/nrf52/EthernetCLI.h>
+#endif
+
 #ifdef DISPLAY_CLASS
  #include "UITask.h"
  static UITask ui_task(display);
@@ -17,9 +22,9 @@ void halt() {
 }

 static char command[MAX_POST_TEXT_LEN+1];
-
-// For power saving
-unsigned long POWERSAVING_FIRSTSLEEP_SECS = 120; // The first sleep (if enabled) from boot
+#ifdef ETHERNET_ENABLED
+static char ethernet_command[MAX_POST_TEXT_LEN+1];
+#endif

 void setup() {
  Serial.begin(115200);
@@ -74,6 +79,9 @@ void setup() {
  mesh::Utils::printHex(Serial, the_mesh.self_id.pub_key, PUB_KEY_SIZE); Serial.println();

  command[0] = 0;
+#ifdef ETHERNET_ENABLED
+  ethernet_command[0] = 0;
+#endif

  sensors.begin();

@@ -83,6 +91,10 @@ void setup() {
  ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
 #endif

+#ifdef ETHERNET_ENABLED
+  ethernet_start_task();
+#endif
+
  // send out initial zero hop Advertisement to the mesh
 #if ENABLE_ADVERT_ON_BOOT == 1
  the_mesh.sendSelfAdvertisement(16000, false);
@@ -108,7 +120,14 @@ void loop() {
  if (len > 0 && command[len - 1] == '\r') {  // received complete line
    command[len - 1] = 0;  // replace newline with C string null terminator
    char reply[160];
+    reply[0] = 0;
+#ifdef ETHERNET_ENABLED
+    if (!ethernet_handle_command(command, reply)) {
+      the_mesh.handleCommand(0, command, reply);
+    }
+#else
    the_mesh.handleCommand(0, command, reply);  // NOTE: there is no sender_timestamp via serial!
+#endif
    if (reply[0]) {
      Serial.print("  -> "); Serial.println(reply);
    }
@@ -116,6 +135,19 @@ void loop() {
    command[0] = 0;  // reset command buffer
  }

+#ifdef ETHERNET_ENABLED
+  ethernet_loop_maintain();
+  if (ethernet_read_line(ethernet_command, sizeof(ethernet_command))) {
+    char reply[160];
+    reply[0] = 0;
+    if (!ethernet_handle_command(ethernet_command, reply)) {
+      the_mesh.handleCommand(0, ethernet_command, reply);
+    }
+    ethernet_send_reply(reply);
+    ethernet_command[0] = 0;
+  }
+#endif
+
  the_mesh.loop();
  sensors.loop();
 #ifdef DISPLAY_CLASS
@@ -125,19 +157,4 @@ void loop() {
 #ifdef HAS_EXTERNAL_WATCHDOG
  external_watchdog.loop();
 #endif
-  if (the_mesh.getNodePrefs()->powersaving_enabled && !board.isUsbDataConnected()) {
-    uint32_t sleep_secs = the_mesh.getPowerSaveSleepSeconds(30);
-#ifdef HAS_EXTERNAL_WATCHDOG
-    if (sleep_secs > 0) external_watchdog.feed();
-#endif
-#if defined(NRF52_PLATFORM)
-    if (sleep_secs > 0) {
-      board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
-    }
-#else
-    if (sleep_secs > 0 && the_mesh.millisHasNowPassed(POWERSAVING_FIRSTSLEEP_SECS * 1000)) { // To check if it is time to sleep
-      board.sleep(sleep_secs); // Sleep. Wake up for scheduled jobs or when receiving a LoRa packet
-    }
-#endif
-  }
 }
@@ -202,10 +202,6 @@ protected:
    return true;
  }

-  uint8_t getDefaultTxCodingRate() const override {
-    return LORA_CR;
-  }
-
  void onDiscoveredContact(ContactInfo& contact, bool is_new, uint8_t path_len, const uint8_t* path) override {
    // TODO: if not in favs,  prompt to add as fav(?)

@@ -285,7 +281,7 @@ public:
  {
    // defaults
    memset(&_prefs, 0, sizeof(_prefs));
-    _prefs.airtime_factor = 2.0;    // one third
+    _prefs.airtime_factor = 1.0;
    strcpy(_prefs.node_name, "NONAME");
    _prefs.freq = LORA_FREQ;
    _prefs.tx_power_dbm = LORA_TX_POWER;
@@ -1,12 +1,5 @@
 #include "SensorMesh.h"

-static uint32_t nextRadioApplyRetryDelay(uint8_t& failure_count) {
-  uint8_t shift = failure_count < 5 ? failure_count : 5;
-  if (failure_count < 6) failure_count++;
-  uint32_t delay_ms = 1000UL << shift;
-  return delay_ms > 30000UL ? 30000UL : delay_ms;
-}
-
 /* ------------------------------ Config -------------------------------- */

 #ifndef LORA_FREQ
@@ -154,36 +147,6 @@ static float getFloat(const uint8_t * buffer, uint8_t size, uint32_t multiplier,
  return sign * ((float) value / multiplier);
 }

-static uint8_t getTelemetryPermissions(uint8_t acl_perms, uint8_t telemetry_access) {
-  if (telemetry_access == TELEMETRY_ACCESS_ALL) {
-    return TELEM_PERM_BASE | TELEM_PERM_LOCATION | TELEM_PERM_ENVIRONMENT;
-  }
-
-  uint8_t role = acl_perms & PERM_ACL_ROLE_MASK;
-  if (role >= PERM_ACL_READ_ONLY) {
-    return TELEM_PERM_BASE | TELEM_PERM_LOCATION | TELEM_PERM_ENVIRONMENT;
-  }
-  return 0;
-}
-
-bool SensorMesh::hasLocationTelemetryClient() {
-  if (_prefs.telemetry_access == TELEMETRY_ACCESS_ALL) {
-    return acl.getNumClients() > 0;
-  }
-
-  for (int i = 0; i < acl.getNumClients(); i++) {
-    ClientInfo* c = acl.getClientByIdx(i);
-    if ((c->permissions & PERM_ACL_ROLE_MASK) >= PERM_ACL_READ_ONLY) {
-      return true;
-    }
-  }
-  return false;
-}
-
-void SensorMesh::updateGpsTelemetryPolicy() {
-  sensors.setTelemetryLocationAccessAvailable(hasLocationTelemetryClient());
-}
-
 static uint8_t putFloat(uint8_t * dest, float value, uint8_t size, uint32_t multiplier, bool is_signed) {
  // check sign
  bool sign = value < 0;
@@ -210,16 +173,13 @@ static uint8_t putFloat(uint8_t * dest, float value, uint8_t size, uint32_t mult
 uint8_t SensorMesh::handleRequest(uint8_t perms, uint32_t sender_timestamp, uint8_t req_type, uint8_t* payload, size_t payload_len) {
  memcpy(reply_data, &sender_timestamp, 4);   // reflect sender_timestamp back in response packet (kind of like a 'tag')

-  if (req_type == REQ_TYPE_GET_TELEMETRY_DATA) {
+  if (req_type == REQ_TYPE_GET_TELEMETRY_DATA) {  // allow all
    uint8_t perm_mask = ~(payload[0]);    // NEW: first reserved byte (of 4), is now inverse mask to apply to permissions
-    uint8_t telemetry_permissions = getTelemetryPermissions(perms, _prefs.telemetry_access) & perm_mask;

    telemetry.reset();
-    if (telemetry_permissions & TELEM_PERM_BASE) {
-      telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
-    }
+    telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
    // query other sensors -- target specific
-    sensors.querySensors(telemetry_permissions, telemetry);
+    sensors.querySensors(0xFF & perm_mask, telemetry);  // allow all telemetry permissions for admin or guest
    // TODO: let requester know permissions they have:  telemetry.addPresence(TELEM_CHANNEL_SELF, perms);

    uint8_t tlen = telemetry.getSize();
@@ -341,10 +301,6 @@ float SensorMesh::getAirtimeBudgetFactor() const {
  return _prefs.airtime_factor;
 }

-bool SensorMesh::getCADEnabled() const {
-  return _prefs.cad_enabled;
-}
-
 bool SensorMesh::allowPacketForward(const mesh::Packet* packet) {
  if (_prefs.disable_fwd) return false;
  if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
@@ -364,78 +320,12 @@ uint32_t SensorMesh::getDirectRetransmitDelay(const mesh::Packet* packet) {
  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
  return getRNG()->nextInt(0, 6)*t;
 }
-
-bool SensorMesh::allowDirectRetry(const mesh::Packet* packet, const uint8_t* next_hop_hash,
-                                  uint8_t next_hop_hash_len) const {
-  (void)packet;
-  (void)next_hop_hash;
-  (void)next_hop_hash_len;
-  return _prefs.direct_retry_enabled != 0;
-}
-
-void SensorMesh::configureDirectRetryPacket(mesh::Packet* retry, const mesh::Packet* original,
-                                            uint8_t retry_attempt) {
-  if (!_prefs.direct_retry_cr_enabled) {
-    if (retry != NULL) retry->tx_cr = 0;
-    return;
-  }
-  mesh::Mesh::configureDirectRetryPacket(retry, original, retry_attempt);
-}
-
-uint32_t SensorMesh::getDirectRetryEchoDelay(const mesh::Packet* packet) const {
-  uint32_t base_ms = constrain((uint32_t)_prefs.direct_retry_base_ms, (uint32_t)10, (uint32_t)5000);
-  return base_ms + getDirectRetryPacketAirtimeDelay(packet);
-}
-
-uint8_t SensorMesh::getDirectRetryMaxAttempts(const mesh::Packet* packet) const {
-  if (packet != NULL && packet->getPayloadType() == PAYLOAD_TYPE_TXT_MSG) return 21;
-  return constrain(_prefs.direct_retry_attempts, 1, 15);
-}
-
-uint32_t SensorMesh::getDirectRetryAttemptDelay(const mesh::Packet* packet, uint8_t attempt_idx) {
-  uint32_t step_ms = constrain((uint32_t)_prefs.direct_retry_step_ms, (uint32_t)0, (uint32_t)5000);
-  return getDirectRetransmitDelay(packet) + getDirectRetryEchoDelay(packet)
-      + ((uint32_t)attempt_idx * step_ms);
-}
-
-bool SensorMesh::allowFloodRetry(const mesh::Packet* packet) const {
-  if (_prefs.disable_fwd || _prefs.flood_retry_attempts == 0) return false;
-  return packet == NULL || packet->getPayloadType() != PAYLOAD_TYPE_ADVERT
-      || _prefs.flood_retry_advert_enabled;
-}
-
-uint8_t SensorMesh::getFloodRetryMaxPathLength(const mesh::Packet* packet) const {
-  uint8_t general_gate = _prefs.flood_retry_max_path == FLOOD_RETRY_PATH_GATE_DISABLED
-      ? FLOOD_RETRY_PATH_GATE_DISABLED
-      : constrain(_prefs.flood_retry_max_path, 0, 63);
-  uint8_t group_data_gate = _prefs.flood_retry_group_max_path == FLOOD_RETRY_PATH_GATE_DISABLED
-      ? FLOOD_RETRY_PATH_GATE_DISABLED
-      : constrain(_prefs.flood_retry_group_max_path, 0, 63);
-  return applyGroupDataFloodRetryPathGate(packet, general_gate, group_data_gate);
-}
-
-uint8_t SensorMesh::getFloodRetryMaxAttempts(const mesh::Packet* packet) const {
-  if (_prefs.disable_fwd) return 0;
-
-  uint8_t attempts = constrain(_prefs.flood_retry_attempts, 0, 15);
-  uint16_t scaled_attempts = attempts;
-  uint8_t hops = packet != NULL ? packet->getPathHashCount() : 0;
-  if (hops == 0) {
-    scaled_attempts = (uint16_t)attempts * 2U;
-  } else if (hops == 1) {
-    scaled_attempts = (((uint16_t)attempts * 3U) + 1U) / 2U;
-  }
-  return scaled_attempts > 15 ? 15 : (uint8_t)scaled_attempts;
-}
-
-void SensorMesh::onRetryConfigChanged() {
-  if (!_prefs.direct_retry_enabled) cancelAllDirectRetries();
-  if (_prefs.disable_fwd || _prefs.flood_retry_attempts == 0) cancelAllFloodRetries();
-}
-
 int SensorMesh::getInterferenceThreshold() const {
  return _prefs.interference_threshold;
 }
+bool SensorMesh::getCADEnabled() const {
+  return _prefs.cad_enabled;
+}
 int SensorMesh::getAGCResetInterval() const {
  return ((int)_prefs.agc_reset_interval) * 4000;   // milliseconds
 }
@@ -459,10 +349,6 @@ uint8_t SensorMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t*
    }

    client = acl.putClient(sender, PERM_RECV_ALERTS_HI | PERM_RECV_ALERTS_LO);  // add to contacts (if not already known)
-    if (client == NULL) {
-      MESH_DEBUG_PRINTLN("Login rejected: ACL is full of protected contacts");
-      return 0;
-    }
    if (sender_timestamp <= client->last_timestamp) {
      MESH_DEBUG_PRINTLN("Possible login replay attack!");
      return 0;  // FATAL: client table is full -OR- replay attack
@@ -475,7 +361,6 @@ uint8_t SensorMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t*
    memcpy(client->shared_secret, secret, PUB_KEY_SIZE);

    dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
-    updateGpsTelemetryPolicy();
  }

  if (is_flood) {
@@ -515,16 +400,14 @@ void SensorMesh::handleCommand(uint32_t sender_timestamp, char* command, char* r
    if (sp == NULL) {
      strcpy(reply, "Err - bad params");
    } else {
-      size_t hex_len = (size_t)(sp - hex);
      *sp++ = 0;   // replace space with null terminator

      uint8_t pubkey[PUB_KEY_SIZE];
-      if (hex_len > 0 && hex_len <= PUB_KEY_SIZE * 2 && (hex_len & 1) == 0
-          && mesh::Utils::fromHex(pubkey, (int)(hex_len / 2), hex)) {
+      int hex_len = min(sp - hex, PUB_KEY_SIZE*2);
+      if (mesh::Utils::fromHex(pubkey, hex_len / 2, hex)) {
        uint8_t perms = atoi(sp);
-        if (acl.applyPermissions(self_id, pubkey, (int)(hex_len / 2), perms)) {
+        if (acl.applyPermissions(self_id, pubkey, hex_len / 2, perms)) {
          dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);   // trigger acl.save()
-          updateGpsTelemetryPolicy();
          strcpy(reply, "OK");
        } else {
          strcpy(reply, "Err - invalid params");
@@ -565,7 +448,6 @@ void SensorMesh::handleCommand(uint32_t sender_timestamp, char* command, char* r
    sprintf(reply, "%x", board.getGpio());
  } else{
    _cli.handleCommand(sender_timestamp, command, reply);  // common CLI commands
-    updateGpsTelemetryPolicy();
  }
 }

@@ -649,7 +531,7 @@ void SensorMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_i
    memcpy(&timestamp, data, 4);

    if (timestamp > from->last_timestamp) {  // prevent replay attacks
-      uint8_t reply_len = handleRequest(from->permissions, timestamp, data[4], &data[5], len - 5);
+      uint8_t reply_len = handleRequest(from->isAdmin() ? 0xFF : from->permissions, timestamp, data[4], &data[5], len - 5);
      if (reply_len == 0) return;  // invalid command

      from->last_timestamp = timestamp;
@@ -826,15 +708,9 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
  last_read_time = 0;
  num_alert_tasks = 0;
  set_radio_at = revert_radio_at = 0;
-  active_cr = LORA_CR;
-  temp_radio_applied = false;
-  saved_radio_apply_pending = false;
-  radio_apply_retry_at = 0;
-  radio_apply_failures = 0;

  // defaults
-  memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;    // one half
+  _prefs.airtime_factor = 1.0;
  _prefs.rx_delay_base =   0.0f;  // turn off by default, was 10.0;
  _prefs.tx_delay_factor = 0.5f;   // was 0.25f
  _prefs.direct_tx_delay_factor = 0.2f; // was zero
@@ -851,19 +727,15 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
  _prefs.flood_advert_interval = 0;   // disabled
  _prefs.disable_fwd = true;
  _prefs.flood_max = 64;
-  _prefs.flood_channel_data_enabled = 1;
-  _prefs.flood_retry_group_max_path = FLOOD_RETRY_GROUP_MAX_PATH_DEFAULT;
  _prefs.interference_threshold = 0;  // disabled
-  _prefs.radio_fem_rxgain = 1;        // LoRa FEM RX gain on by default (FEM boards)
  _prefs.cad_enabled = 0;             // hardware CAD before TX (off by default; 'set cad on')
-  _prefs.rx_ps_rx_us = RX_POWERSAVING_DEFAULT_RX_US;
-  _prefs.rx_ps_sleep_us = RX_POWERSAVING_DEFAULT_SLEEP_US;

  // GPS defaults
  _prefs.gps_enabled = 0;
  _prefs.gps_interval = 0;
  _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
  _prefs.radio_fem_rxgain = 1;
+  _prefs.radio_fem_txgain = 0;

  memset(default_scope.key, 0, sizeof(default_scope.key));
 }
@@ -876,7 +748,6 @@ void SensorMesh::begin(FILESYSTEM* fs) {

  acl.load(_fs, self_id);
  region_map.load(_fs);
-  updateGpsTelemetryPolicy();

  // establish default-scope
  {
@@ -898,12 +769,10 @@ void SensorMesh::begin(FILESYSTEM* fs) {
    }
  }

-  saved_radio_apply_pending = !applySavedRadioParams();
-  if (!saved_radio_apply_pending) {
-    radio_driver.setTxPower(_prefs.tx_power_dbm);
-  }
-  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);   // LoRa FEM LNA (FEM boards only)
-  setRxPowerSaving(_prefs.rx_powersaving_enabled, _prefs.rx_ps_rx_us, _prefs.rx_ps_sleep_us);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);

  updateAdvertTimer();
  updateFloodAdvertTimer();
@@ -915,18 +784,6 @@ void SensorMesh::begin(FILESYSTEM* fs) {
 #endif
 }

-bool SensorMesh::applySavedRadioParams() {
-  uint32_t timings[2] = {_prefs.rx_ps_rx_us, _prefs.rx_ps_sleep_us};
-  const uint32_t* applied_timings = _prefs.rx_powersaving_enabled
-      && radio_driver.supportsRxPowerSaving() ? timings : NULL;
-  if (!radio_driver.setParams(
-        _prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr, applied_timings)) {
-    return false;
-  }
-  active_cr = _prefs.cr;
-  return true;
-}
-
 bool SensorMesh::formatFileSystem() {
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
    return InternalFS.format();
@@ -954,8 +811,6 @@ void SensorMesh::saveIdentity(const mesh::LocalIdentity& new_id) {
 }

 void SensorMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) {
-  radio_apply_retry_at = 0;
-  radio_apply_failures = 0;
  set_radio_at = futureMillis(2000);   // give CLI reply some time to be sent back, before applying temp radio params
  pending_freq = freq;
  pending_bw = bw;
@@ -980,7 +835,7 @@ void SensorMesh::sendSelfAdvertisement(int delay_millis, bool flood) {

 void SensorMesh::updateAdvertTimer() {
  if (_prefs.advert_interval > 0) {  // schedule local advert timer
-    next_local_advert = futureMillis((int)((uint32_t)_prefs.advert_interval * 2 * 60 * 1000));
+    next_local_advert = futureMillis( ((uint32_t)_prefs.advert_interval) * 2 * 60 * 1000);
  } else {
    next_local_advert = 0;  // stop the timer
  }
@@ -997,15 +852,6 @@ void SensorMesh::setTxPower(int8_t power_dbm) {
  radio_driver.setTxPower(power_dbm);
 }

-bool SensorMesh::setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) {
-  return radio_driver.setRxPowerSaving(enable, rx_us, sleep_us);
-}
-void SensorMesh::getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) {
-  *soft = radio_driver.getRxPsWatchdogSoftCount();
-  *hard = radio_driver.getRxPsWatchdogHardCount();
-}
-
-
 void SensorMesh::formatStatsReply(char *reply) {
  StatsFormatHelper::formatCoreStats(reply, board, *_ms, _err_flags, _mgr);
 }
@@ -1067,72 +913,16 @@ void SensorMesh::loop() {
    updateAdvertTimer();   // schedule next local advert
  }

-  const bool revert_radio_due = revert_radio_at && millisHasNowPassed(revert_radio_at);
-  const bool radio_apply_ready = !radio_apply_retry_at || millisHasNowPassed(radio_apply_retry_at);
-  bool radio_apply_failed = false;
-  if (revert_radio_due && !temp_radio_applied) {
-    // Never apply a temporary channel after its window has already ended.
-    set_radio_at = revert_radio_at = 0;
-    radio_apply_retry_at = 0;
-    radio_apply_failures = 0;
-    MESH_DEBUG_PRINTLN("Temp radio params expired before apply");
-  } else if (revert_radio_due && !hasOutbound() && radio_apply_ready) {
-    if (applySavedRadioParams()) {
-      if (saved_radio_apply_pending) {
-        radio_driver.setTxPower(_prefs.tx_power_dbm);
-      }
-      set_radio_at = revert_radio_at = 0;
-      temp_radio_applied = false;
-      saved_radio_apply_pending = false;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-      MESH_DEBUG_PRINTLN("Radio params restored");
-    } else {
-      radio_apply_failed = true;
-    }
-  } else if (set_radio_at && millisHasNowPassed(set_radio_at) && !hasOutbound()
-             && radio_apply_ready) {
-    uint32_t rx_us = _prefs.rx_ps_rx_us;
-    uint32_t sleep_us = _prefs.rx_ps_sleep_us;
-    bool timing_ok = true;
-    if (_prefs.rx_powersaving_enabled && _prefs.rx_ps_level != 0) {
-      uint32_t preamble = _prefs.rx_ps_preamble ? _prefs.rx_ps_preamble
-                                                : (pending_sf <= 8 ? 32UL : 16UL);
-      timing_ok = CommonCLI::calculateRxPowerSavingLevel(
-          _prefs.rx_ps_level, pending_sf, pending_bw, preamble, &rx_us, &sleep_us);
-    }
-    uint32_t timings[2] = {rx_us, sleep_us};
-    const uint32_t* applied_timings = _prefs.rx_powersaving_enabled
-        && radio_driver.supportsRxPowerSaving() ? timings : NULL;
-    if (timing_ok && radio_driver.setParams(
-          pending_freq, pending_bw, pending_sf, pending_cr, applied_timings)) {
-      set_radio_at = 0;
-      active_cr = pending_cr;
-      temp_radio_applied = true;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-      MESH_DEBUG_PRINTLN("Temp radio params");
-    } else {
-      // A failed setParams() may have applied only a prefix of the tuple.
-      // Ensure expiry restores the complete saved configuration.
-      saved_radio_apply_pending = true;
-      radio_apply_failed = true;
-    }
+  if (set_radio_at && millisHasNowPassed(set_radio_at)) {   // apply pending (temporary) radio params
+    set_radio_at = 0;  // clear timer
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
+    MESH_DEBUG_PRINTLN("Temp radio params");
  }

-  if (saved_radio_apply_pending && !temp_radio_applied && !hasOutbound()
-      && radio_apply_ready && !radio_apply_failed) {
-    if (applySavedRadioParams()) {
-      radio_driver.setTxPower(_prefs.tx_power_dbm);
-      saved_radio_apply_pending = false;
-      radio_apply_retry_at = 0;
-      radio_apply_failures = 0;
-    } else {
-      radio_apply_failed = true;
-    }
-  }
-  if (radio_apply_failed) {
-    radio_apply_retry_at = futureMillis(nextRadioApplyRetryDelay(radio_apply_failures));
+  if (revert_radio_at && millisHasNowPassed(revert_radio_at)) {   // revert radio params to orig
+    revert_radio_at = 0;  // clear timer
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    MESH_DEBUG_PRINTLN("Radio params restored");
  }

  uint32_t curr = getRTCClock()->getCurrentTime();
@@ -1140,7 +930,7 @@ void SensorMesh::loop() {
    telemetry.reset();
    telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
    // query other sensors -- target specific
-    sensors.querySensors(TELEM_PERM_BASE | TELEM_PERM_ENVIRONMENT, telemetry);
+    sensors.querySensors(0xFF, telemetry);  // allow all telemetry permissions

    onSensorDataRead();

@@ -34,11 +34,11 @@
 #define PERM_RECV_ALERTS_HI    (1 << 7)   // high priority alerts

 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "6 Jun 2026"
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif

 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif

 #define FIRMWARE_ROLE "sensor"
@@ -68,8 +68,6 @@ public:
  void eraseLogFile() override { }
  void dumpLogFile() override { }
  void setTxPower(int8_t power_dbm) override;
-  bool setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) override;
-  void getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) override;
  void formatNeighborsReply(char *reply) override {
    strcpy(reply, "not supported");
  }
@@ -84,11 +82,6 @@ public:
  float getTelemValue(uint8_t channel, uint8_t type);

 protected:
-#if defined(ENABLE_OTA)
-  bool isTempRadioActive() const override {
-    return temp_radio_applied && revert_radio_at != 0 && !millisHasNowPassed(revert_radio_at);
-  }
-#endif
  // current telemetry data queries
  float getVoltage(uint8_t channel) { return getTelemValue(channel, LPP_VOLTAGE); }
  float getCurrent(uint8_t channel) { return getTelemValue(channel, LPP_CURRENT); }
@@ -126,25 +119,9 @@ protected:
  int calcRxDelay(float score, uint32_t air_time) const override;
  uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
-  bool allowDirectRetry(const mesh::Packet* packet, const uint8_t* next_hop_hash,
-                        uint8_t next_hop_hash_len) const override;
-  void configureDirectRetryPacket(mesh::Packet* retry, const mesh::Packet* original,
-                                  uint8_t retry_attempt) override;
-  uint32_t getDirectRetryEchoDelay(const mesh::Packet* packet) const override;
-  uint8_t getDirectRetryMaxAttempts(const mesh::Packet* packet) const override;
-  uint32_t getDirectRetryAttemptDelay(const mesh::Packet* packet, uint8_t attempt_idx) override;
-  bool allowFloodRetry(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxPathLength(const mesh::Packet* packet) const override;
-  uint8_t getFloodRetryMaxAttempts(const mesh::Packet* packet) const override;
-
-  bool supportsBasicRetryConfig() const override { return true; }
-  void onRetryConfigChanged() override;
  int getInterferenceThreshold() const override;
  bool getCADEnabled() const override;
  int getAGCResetInterval() const override;
-  uint8_t getDefaultTxCodingRate() const override {
-    return active_cr;
-  }
  void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
  int searchPeersByHash(const uint8_t* hash) override;
  void getPeerSharedSecret(uint8_t* dest_secret, int peer_idx) override;
@@ -175,18 +152,9 @@ private:
  float pending_bw;
  uint8_t pending_sf;
  uint8_t pending_cr;
-  uint8_t active_cr;
-  bool temp_radio_applied;
-  bool saved_radio_apply_pending;
-  unsigned long radio_apply_retry_at;
-  uint8_t radio_apply_failures;
-
-  bool applySavedRadioParams();

  uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood);
  uint8_t handleRequest(uint8_t perms, uint32_t sender_timestamp, uint8_t req_type, uint8_t* payload, size_t payload_len);
-  bool hasLocationTelemetryClient();
-  void updateGpsTelemetryPolicy();
  mesh::Packet* createSelfAdvert();

  void sendAlert(const ClientInfo* c, Trigger* t);
@@ -49,20 +49,19 @@ void UITask::renderCurrScreen() {
  char tmp[80];
  if (millis() < BOOT_SCREEN_MILLIS) { // boot screen
    // meshcore logo
-    _display->setColor(DisplayDriver::BLUE);
+    _display->setColor(UIColor::corp_blue);
    int logoWidth = 128;
    _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);

    // meshcore website
    const char* website = "https://meshcore.io";
-    _display->setColor(DisplayDriver::LIGHT);
+    _display->setColor(UIColor::primary_txt);
    _display->setTextSize(1);
    uint16_t websiteWidth = _display->getTextWidth(website);
    _display->setCursor((_display->width() - websiteWidth) / 2, 22);
    _display->print(website);

    // version info
-    _display->setColor(DisplayDriver::LIGHT);
    _display->setTextSize(1);
    uint16_t versionWidth = _display->getTextWidth(_version_info);
    _display->setCursor((_display->width() - versionWidth) / 2, 35);
@@ -77,12 +76,11 @@ void UITask::renderCurrScreen() {
    // node name
    _display->setCursor(0, 0);
    _display->setTextSize(1);
-    _display->setColor(DisplayDriver::GREEN);
+    _display->setColor(UIColor::primary_txt);
    _display->print(_node_prefs->node_name);

    // freq / sf
    _display->setCursor(0, 20);
-    _display->setColor(DisplayDriver::YELLOW);
    sprintf(tmp, "FREQ: %06.3f SF%d", _node_prefs->freq, _node_prefs->sf);
    _display->print(tmp);

@@ -1 +0,0 @@
-<b>MQTT Observer v1.16.0 (experimental)</b><ul><li>Up to 6 MQTT broker slots with built-in presets</li><li>Presets: Analyzer, MeshMapper, MeshRank, Waev, Meshomatic, CascadiaMesh, TennMesh, NashMesh, and more</li><li>JWT (Ed25519) and username/password authentication</li><li>Automatic reconnection with exponential backoff</li><li>After flashing, configure via serial console (115200 baud)</li></ul><p>See <a target='_blank' href='https://github.com/agessaman/MeshCore/blob/mqtt-bridge-implementation-flex/MQTT_IMPLEMENTATION.md'>setup guide</a> for configuration instructions.</p>
@@ -1 +0,0 @@
-{"type": "library", "name": "PsychicMqttClient", "version": "0.2.4", "spec": {"owner": "elims", "id": 17628, "name": "PsychicMqttClient", "requirements": null, "uri": null}}
				`@@ -1 +0,0 @@`
				<b>MQTT Observer v1.16.0 (experimental)</b><ul><li>Up to 6 MQTT broker slots with built-in presets</li><li>Presets: Analyzer, MeshMapper, MeshRank, Waev, Meshomatic, CascadiaMesh, TennMesh, NashMesh, and more</li><li>JWT (Ed25519) and username/password authentication</li><li>Automatic reconnection with exponential backoff</li><li>After flashing, configure via serial console (115200 baud)</li></ul><p>See <a target='_blank' href='https://github.com/agessaman/MeshCore/blob/mqtt-bridge-implementation-flex/MQTT_IMPLEMENTATION.md'>setup guide</a> for configuration instructions.</p>
				`@@ -1 +0,0 @@`
				`{"type": "library", "name": "PsychicMqttClient", "version": "0.2.4", "spec": {"owner": "elims", "id": 17628, "name": "PsychicMqttClient", "requirements": null, "uri": null}}`