rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,346 Commits 1 Branch 211 Tags
fab89ef01a289b4bd73c65a21e70a80d2112a8fd
Commit Graph
4346 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
mikecarper fab89ef01a Merge upstream dev 
Resolve the LR2021 transmit-power receiver restart alongside local radio state caching.
 2026-08-17 23:49:41 -07:00
mikecarper 32a681a59b Merge IoTThinks PowerSaving-v17 
Port current-compatible power-saving updates while retaining newer local implementations.
 2026-08-17 23:45:06 -07:00
IoTThinks 11222035ee Merge pull request #15 from Dom4n/fix/powersaving-v17-noise-floor-after-agc-reset 
fix(radio): recalibrate noise floor after AGC reset
 2026-08-18 11:02:46 +07:00
Kevin Le 167a32fbdc Fixed to show d h, h m and m for BLE companions 2026-08-18 10:40:16 +07:00
Kevin Le 307bc938b5 Fixed RXPS for LR1110 2026-08-18 09:29:12 +07:00
Jarosław Domański be4b276931 fix(radio): preserve RX during noise floor calibration 2026-08-18 03:08:20 +02:00
Jarosław Domański 0965a6aad1 fix(radio): recalibrate noise floor after AGC reset 2026-08-18 02:32:19 +02:00
IoTThinks a5a519ac31 Merge pull request #14 from BKWSU-UK/PowerSaving-v17 
Applied GPS power saving profile with 10 min on, 1 day off cycle
 2026-08-17 20:26:56 +07:00
Huw Duddy 45c0c32354 Merge pull request #3218 from fkallay1/fix/lr2021-set-tx-power-rx-stall 
Fix LR2021 occasionally stopping reception after a TX power change
 2026-08-17 23:20:32 +10:00
Huw Duddy 9387f55d7e trimmed comment 2026-08-17 23:16:01 +10:00
Simon Blandford a6ae765020 Applied GPS power saving profile with 10 min on, 1 day off cycle 2026-08-17 13:25:22 +01:00
mikecarper 6025347445 Update Mesh America Companion catalogs for 1.17.1.2 2026-08-17 00:16:04 -07:00
Kevin Le 54e5bb04e1 Fixed build script for usb companions 2026-08-17 12:44:08 +07:00
mikecarper 87fb6f9fa5 Fit complete Companion correction matrix 2026-08-16 22:42:07 -07:00
mikecarper 9ea2b271a5 Add Companion-only release matrix build 2026-08-16 21:08:14 -07:00
mikecarper ba14fa1c32 Enable Companion power saving by default 2026-08-16 21:06:23 -07:00
mikecarper e2afc1bc5a Stabilize T-Beam full companion startup 2026-08-16 11:00:55 -07:00
Kevin Le 1d36e0e019 Added missing ENABLE_USB_INTERFACE for Xiao S3 Wio 2026-08-16 18:45:42 +07:00
Kevin Le 54f292f40d Added uptime to companion screen 2026-08-16 16:07:03 +07:00
Kevin Le cb7c4b0fb6 Fixed esp32c6_base to extend arduino_base 2026-08-16 15:32:44 +07:00
mikecarper 8b4e57b1e5 Keep T-Beam companion available without radio 2026-08-15 22:34:45 -07:00
mikecarper bd2e668961 Add T-Beam WiFi button toggle 2026-08-15 18:12:09 -07:00
mikecarper 843d309e2b Fix Companion device power saving 2026-08-15 17:58:37 -07:00
mikecarper b8d274c90e Expose RX power saving in WebConfig 2026-08-15 09:07:41 -07:00
Kevin Le 8a5f7cae85 Merge branch 'PowerSaving-v17' of https://github.com/IoTThinks/MeshCore into PowerSaving-v17 2026-08-15 18:30:01 +07:00
Kevin Le c0af1b5cb1 Fixed to use shorter platform_packages for BLE PowerSaving 2026-08-15 18:29:27 +07:00
Kevin Le e1758d2ece Fixed for T096 OLED to save 3.5mA and use dark theme 2026-08-15 18:26:32 +07:00
IoTThinks ca85060c42 Merge pull request #13 from Dom4n/feature/rxps-v1.17.1-clean 
RX power saving using rx duty cycle
 2026-08-15 17:12:54 +07:00
Kevin Le 320ce563d1 BLE Powersaving for heltec_v4_expansionkit 2026-08-15 13:13:25 +07:00
mikecarper 6fe31db21f Complete v1.17.1.1 release matrix support 2026-08-14 21:09:14 -07:00
mikecarper 4758862d26 Restore normal T-Beam 1W RXEN startup 2026-08-14 20:11:36 -07:00
mikecarper 7f6a15c65b Support subdivided nRF52 MOTA bridges 2026-08-14 19:57:13 -07:00
mikecarper 4e6328d875 Publish Mesh America 1.17.1.1 catalog 2026-08-14 17:46:21 -07:00
mikecarper 9d67eee9bd Add T-Beam 1W external LNA control 2026-08-14 17:45:51 -07:00
Fedor Kallay 114093ee0e fix(lr2021): setTxPower() could leave the receiver down until reboot 
RadioLibWrapper::setTxPower() called setOutputPower() and nothing else. On
LR2021 that writes the PA config and TxParams, which are standby-only commands,
and it never re-arms the receiver.

This only affects LR2021 boards. recvRaw() has:

    #if defined(USE_LR2021)
      state = STATE_RX;    // LR2021 stays in Rx after readData
    #else
      state = STATE_IDLE;  // need another startReceive()
    #endif

so on SX126x the next recvRaw() re-arms Rx anyway and the write is harmless,
while on LR2021 startReceive() is never called again on its own. A 'set tx'
issued while the radio was listening could therefore stop reception until the
next reboot. Observed a few times on an LR2021 repeater; recovery required a
power cycle.

Dispatcher's stuck-radio check does not catch it: isInRecvMode() reports the
wrapper's own `state` flag rather than the chip's actual mode, so it still
believes the radio is in Rx, and it only raises ERR_EVENT_STARTRX_TIMEOUT
without attempting recovery.

Fix: on LR2021, drop to standby via idle() before writing the PA config and let
checkRecv() re-arm Rx - the same pattern resetAGC() and
applySideDetectorConfig() already use. Other radios are left untouched.

Affects meshtracker_x1 and meshnology_w12 (both USE_LR2021).

Tested on hardware with an LR2021 repeater: six consecutive 'set tx' changes
(15/18/21/14/19/14), after which the radio kept receiving and forwarding
traffic (rawrx/rxpkts increasing, no missed IRQs). Noise-floor sampling also
kept updating, which only happens while state == STATE_RX.
 2026-08-15 02:31:19 +02:00
mikecarper d10e0b46c5 Fix complete firmware matrix builds 2026-08-14 15:16:03 -07:00
Kevin Le 4bad6830b1 Build script for PowerSaving 17.1 2026-08-14 23:42:25 +07:00
Kevin Le 0e47bdf846 Hardcoded femon, femoff for v4 and T096 2026-08-14 23:42:25 +07:00
Kevin Le d42f4240ff Fixed PowerSaving for ESP32 USB companions 2026-08-14 23:42:25 +07:00
Kevin Le 1e888cb31a Added POWERSAVING_DEBUG 2026-08-14 23:42:25 +07:00
Kevin Le 6e4e6f16a6 Prevented back-powering to save 2.8 mA for ST7735Display 2026-08-14 23:42:25 +07:00
Kevin Le 687bac55eb Time keep for ESP32 accross reboots 2026-08-14 23:42:25 +07:00
Kevin Le 772dc84708 Time keep for NRF52 across resets 2026-08-14 23:42:25 +07:00
Kevin Le a00fbbe252 Removed obsolete enterDeepSleep of TBbeam 2026-08-14 23:42:25 +07:00
Kevin Le 4cb67d9054 GPS PowerSaving, outpath, sensor, reboot.interval, board_build.ldscript 2026-08-14 23:36:52 +07:00
Kevin Le 8002d1e2ec Disabled BLE_DEBUG_LOGGING for M6 2026-08-14 23:36:52 +07:00
Kevin Le 43882d868a Added battery measurement for Xiao S3 Wio 2026-08-14 23:36:52 +07:00
Kevin Le be6f3599e2 PowerSaving for room servers 2026-08-14 23:36:52 +07:00
Kevin Le 594d770968 PowerSaving for companions 2026-08-14 23:36:52 +07:00
Kevin Le 21fc3bf24d Disabled NRF52_POWER_MANAGEMENT and added board_build.ldscript for time keep in NRF52 2026-08-14 23:36:52 +07:00