Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
Remove unrelated ecosystem comparisons and software citations while retaining hardware links, measured model names, and required license notices.
Preserve stock-peer runners and tests in a verified local validation package. Keep shared Companion USB transport in the firmware repository for the raw-radio sweep and OTA seeder, with focused CI coverage. Restore missing hosted documentation links.
Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.
Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
Reuse the confirmed LoRa modem only inside acknowledged warm continuous-RX hops and revoke that capability before modem initialization or after failures.
Opt the tested T-Deck into IQ workaround reuse and an exact 8,888,888 Hz SPI setting. Keep the existing BUSY, packet-ownership and recovery checks; other boards retain their modem-cache default.
Render into a PSRAM canvas and release the shared SPI bus between bounded TFT strips. Service only the radio driver at cooperative checkpoints and use the buffered radio HAL, preserving packet and transmit guards.
Cover pixel parity, transaction boundaries, allocation failure, partial updates and sleep/wake behavior with native tests.
Stage STM32 preference prefixes and checked footers in one atomic image, reject declared tails that encounter premature EOF, and share the typed CLI rollback helper. Use the proven Wio Mini code-layout flags on Wio E5 and Tiny Relay without changing features or memory boundaries. All four STM32 targets and RAK4631 Full pass at the full 1.18.0.1 release version length.
Deduplicate validation and preserve the published preference bytes and transactional saves. Correct Ikoka Handheld Companion flash bounds and document QSPI Room migration. Qualify STM32 and RAK4631 at the full 1.18.0.1 release version length.
Adapt the optional onboard-radio probe for RAK3401 and RAK4631 cores using the external RAK13302 image. Preserve SPI1 radio ownership, external FEM startup, and ordinary RAK4631 primary-radio operation.
Probe before boot voltage protection, bound missing-chip waits, release temporary pads, and confirm cold sleep without waking the chip. Add sanitizer-backed host regression tests and CI coverage.
mikecarper
