The project moved to meshcore-dev/meshcore, but two links still pointed at
ripplebiz/MeshCore: the GitHub Issues link in README and the git clone in the
FAQ build instructions.
Also fixes the FAQ build recipe:
- `pio run -e RAK_4631_Repeater` does not exist; the env is spelled
RAK_4631_repeater (variants/rak4631/platformio.ini:40).
- LORA_FREQ was given as 867.5; the default in [arduino_base] is 869.618
(platformio.ini:29). Reworded to point at the flag rather than a value that
drifts with the default preset.
- Renamed the venv so it no longer collides with the cloned directory name.
And one more env-name casing slip in the Raspberry Pi flashing instructions:
`Heltec_V3_companion_radio_ble` should be `Heltec_v3_...`. Release artifacts are
named directly from the env name (build.sh:147), and the two neighbouring
examples in the same block already use the lowercase spelling.
f6338430 added get/set dutycycle to CommonCLI and updated both CLI docs, but
Terminal Chat does not use CommonCLI -- simple_secure_chat/main.cpp:479-507 has
its own `set` handler supporting only af, name, lat, lon, tx and freq. Typing
`set dutycycle` there returns "ERROR: unknown config".
Restores `set af` as the documented command, points readers at cli_commands.md
for the roles that do have dutycycle, and documents `help`
(simple_secure_chat/main.cpp:510), which the client implements but the doc
never listed.
The doc claimed every pwrmgt command except `get pwrmgt.support` returns
"ERROR: Power management not supported" when NRF52_POWER_MANAGEMENT is not
defined. `get pwrmgt.bootreason` is not inside the #ifdef (CommonCLI.cpp:787)
and answers on all boards; only pwrmgt.source and pwrmgt.bootmv are gated.
Three factual errors in companion_protocol.md:
- The channel-datagram payload cap was given as 163 (MAX_FRAME_SIZE - 9 when
MAX_FRAME_SIZE was still 172). It went 172 -> 176 in 62f1b11d, but simply
updating the arithmetic to 167 would be worse than the stale value: 167 is
only the host-frame bound (MyMesh.cpp:1265). The radio-side bound is
MAX_GROUP_DATA_LENGTH = 184 - 16 - 3 = 165 (MeshCore.h:21, enforced at
BaseChatMesh.cpp:544). A 166- or 167-byte payload passes the frame check,
fails the radio check, and comes back as ERR_CODE_TABLE_FULL -- which this
same doc describes as "retry later", so a conforming client would retry a
permanently failing send forever. Documents 165 as the limit to enforce and
calls out the 166-167 band explicitly.
- Channel index was documented as 0-7 throughout. The bound is
MAX_GROUP_CHANNELS (BaseChatMesh.cpp:927,936), which is 40 on most current
variants, 8 on some and 1 on others. Clients should read max_channels from
byte 3 of PACKET_DEVICE_INFO instead. Index 0 is pre-populated with the
built-in Public channel but is not reserved.
- The secret field was documented as "all zeros" for public channels. The
firmware always hashes a real 16-byte key; the public channel ships with
izOH6cXN6mrJ5e26oRXNcg== (companion_radio/MyMesh.cpp:111,1040). An all-zero
secret is not a private channel and not an inert one: SHA256 over 16 zero
bytes is a fixed global constant, giving a well-known channel with an
all-zero AES key. searchChannelsByHash skips unnamed slots for exactly this
reason (BaseChatMesh.cpp:392-401), but a named slot with a zero secret is
not skipped and will absorb null-key group traffic from any node. Now
documented as something not to do.
Five "Default:" values in cli_commands.md no longer matched the firmware:
- radio / freq: the default preset moved to EU/UK (Narrow) in b777a7c6,
changing LORA_FREQ/BW/SF from 869.525/250/11 to 869.618/62.5/8
(platformio.ini:29-31). No variant overrides these, and LORA_CR is 5
on every path, so the full preset is 869.618,62.5,8,5.
- flood.advert.interval: raised to 47 hours in 40180b8f for both repeater
and room server; sensor leaves it disabled.
- advert.interval: prefs store minutes/2 and the getter doubles on read, so a
factory-fresh node reports 2, not 0. But savePrefs() zeroes any interval
below the 60 minute minimum (CommonCLI.cpp:162-165), and it is called from
every `set` handler -- so the value becomes 0 as soon as the node is
configured. Documented both states, since neither alone is the whole story.
- direct.txdelay: repeater defaults to 0.3, room server and sensor to 0.2.
Sources: platformio.ini:29-31, simple_repeater/MyMesh.cpp:893,903-904,
simple_room_server/MyMesh.cpp:650,661-662, simple_sensor/SensorMesh.cpp:716,
726-727, CommonCLI.cpp:162-165,680-681.
Bind Companion replies to request transports, make dual-CDC USB sessions nonblocking and reconnect-safe, and harden nRF52 watchdog/OTA storage paths. Fix T096 button debounce, display wake, sleep races, and the compact message layout; add exact WisBlock OTA profiles plus expanded native/static/HIL documentation.
Scott Powell
mikecarper
agessaman
Kevin Le
Quency-D
Robert Ekl
Liam Cottle