Keep selected chats bound to full contact keys and route keyboard channel sends through the active transport. Deliver accepted plain, room and Meshtext messages to local history and notifications once; disarm rejected sends and retries.
Use shared live radio settings, GPS acquisition and power-saving policy, screen timers and red night palette. Report save failures, preserve verified custom preferences, and guard display controls and shutdown.
Add executable sanitizer regressions for routing, retries, selection, storage faults, UI lifecycle and GPS. Both Companion builds and the shared T-Deck regression pass; no physical Cardputer testing performed.
Integrate mjgodat's keyboard/display Companion, USB Companion, Repeater and
Room Server support for Cardputer-Adv with Cap LoRa-1262.
Fix UI retry dispatch and ACK ownership, packet/storage bounds, numeric
input validation, sparse channel selection, optional-display shutdown,
keyboard layout limits, reserved GPIOs and Windows cross-drive includes.
Retain all 350 contacts and queue capacity using the existing contact cache;
account for the custom UI's runtime allocations in the RAM admission gate.
Carry the MultiMote and DejaVu notices with firmware packages and add CI
coverage for all four board roles plus the shared T-Deck Companion.
Validation: all four Cardputer roles and the T-Deck BLE Companion build;
Cardputer sanitizer, UI, layout, ownership, licensing and storage tests;
65 RAM-policy tests and 14 contact-cache tests. PlatformIO ran serially.
PR: https://github.com/mikecarper/MeshCore/pull/26
New variant variants/m5stack_cardputer_adv for the Cardputer-Adv
(ESP32-S3, 8 MB) with the Cap LoRa-1262 (SX1262 + GNSS):
- Envs: companion_radio_ble, companion_radio_usb, repeater, room_server.
- Board: enables the Cap's antenna path via the PI4IOE5V6408 on the
internal I2C bus (Wire1, G8/G9); Wire stays on the Grove port. LoRa and
microSD share FSPI because the display owns SPI3. TCXO 1.8 V.
- Companion UI adapted from MultiMote/meshcore-cardputer-adv (MIT,
LICENSE.MultiMote), running on the standard companion so the USB
terminal CLI stays available. Contacts/identity stay in internal
SPIFFS; the microSD card is optional (chat history, keyboard layouts).
- Sticky Shift, one-shot Fn with Fn+letter shortcuts, top button (G0)
sends a flood advert, brightness control.
- Text size setting (Normal/Large/Extra large) with DejaVu Sans fonts
generated by tools/gen_vlw_font.py; layouts derive from the font size.
- Power save maps to the companion's powersaving pref; the UI vetoes
light sleep while the screen is on. Low-battery power-off at 3.4 V.
- win_long_cmdline.py: Windows-only -iprefix include shortening so the
ESP32 compile command stays under the 32,767-character limit.
Shared companion changes are guarded by CARDPUTER_ADV_UI: main.cpp
selects CardputerDataStore/CardputerUITask/CardputerMesh, and MyMesh.h
maps the_mesh to the subclass like the PSRAM storage path does.
Tested on hardware (910.525 MHz mesh): radio RX/TX, USB CLI, BLE, UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Detect OLED or the original stock TFT touch assembly in ordinary V4.2/V4.3
images. Add saved live display.type auto/oled/tft/off selection and report
the active selection in board output. Keep sensors on primary I2C, preserve
shared power, and isolate TFT FSPI from radio HSPI through sleep and changes.
Consolidate future picker/build choices only with application capability
proof. Retain exact legacy OTA identities and separate R8 hardware images.
Document controls and physical qualification limits.
Validation: five serialized Full builds with capability/size/RAM checks;
focused host tests, existing R8/T-Deck/OLED regressions, build-profile suite,
and picker/provider tests. V4.3 OLED live changes and off/auto reboot
persistence passed on Mercerwood. Physical TFT qualification remains pending.
Fix the STM32 flash overflows and fleet fixture compile failure from
https://github.com/mikecarper/MeshCore/actions/runs/40241742182.
Fold already-unsupported RX control paths only for the integrated STM32WL
wrapper. Preserve RXPS-off validation, persistence, pending application and
rollback. External radios retain their supported controls.
Use measured GCC 14 code sharing in the four small STM32 USB Companion
recipes. Keep firmware features, contact/channel capacities, filesystem
boundaries and flash/RAM admission checks unchanged.
Refresh downstream host fixtures for saved radio intent, deferred service
restarts, WebConfig ownership, RX recovery and color tint state. Retain or
strengthen behavior checks rather than skipping failing coverage.
Validation: canonical RAK3x72, Wio Mini, Wio Dev and Tiny Relay USB Companion
packages and Mini Repeater build passed at release-version length. All
post-failure host checks, compact arithmetic/float checks, build-profile and
real PlatformIO recipe/path/RAM-policy checks passed locally.
Adapt upstream MeshCore #3579 at 7457cff43c22697119e06ad7d192a37de0990403:
retain GC1109 LF standby bias, with checked cold controls before band supply
changes and shutdown. Preserve exclusive LF/HF rails and TX error cleanup.
Reset before boot rail changes and before SPI-dependent hard recovery.
Retain our stronger implementation of #3512 at
d208bfef94ab83280de30ba4a0675ff73b3ecef3. Add regressions for suspect FIFO
contents, failed RX_DONE acknowledgement, and fresh preamble timing.
W12 TX power defaults from #3319 were already included via 65aa1138a.
Validation: 79 targeted native tests; canonical W12 Full repeater and Full
Companion builds, capability checks, app-size and RAM checks passed.
Physical W12 RF envelope, current and LoRa management confirmation remain.
Upstream PRs:
https://github.com/meshcore-dev/MeshCore/pull/3579https://github.com/meshcore-dev/MeshCore/pull/3512https://github.com/meshcore-dev/MeshCore/pull/3319
Default to one hour after sunset through sunrise, using fresh cached GPS or recent direct RF neighbor locations. Provide saved CLI and WebConfig controls with a small integer solar approximation and no additional framebuffer.
Bring in the new Companion WiFi profiles while preserving existing OLED detection, message queues and OTA safeguards. Include dynamic WiFi helpers consistently and refresh the affected test fixtures.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
Remove unrelated ecosystem comparisons and software citations while retaining hardware links, measured model names, and required license notices.
Preserve stock-peer runners and tests in a verified local validation package. Keep shared Companion USB transport in the firmware repository for the raw-radio sweep and OTA seeder, with focused CI coverage. Restore missing hosted documentation links.
Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.
Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
mikecarper
mjgodatandClaude Opus 5.5
Kevin Le
liamcottle
