Updated the otaFromManifestImpl method to enhance the display of
available and current firmware versions. The changes ensure that
the short commit hash is included in the status messages,
providing clearer versioning information during OTA checks.
Improved the otaFromManifestImpl method to handle dry run scenarios
by allowing HTTP fetches without TLS, reducing heap usage on no-PSRAM
boards. This change ensures better compatibility and reliability during
OTA checks while maintaining security for actual updates.
Enhanced the firmware versioning system by appending a build number
suffix when available, allowing for better tracking of published builds.
This change improves the OTA update process by providing clearer
versioning information in the embedded firmware string.
Added support for deferred OTA updates in the MyMesh class, allowing
the system to schedule firmware updates to occur after a confirmation
reply is sent. This change improves the user experience by ensuring
that the update process does not block the main application loop,
allowing for smoother operation during firmware updates.
Updated the startOTAUpdate method to serve the ElegantOTA on the
station IP when connected to a WiFi network, enhancing accessibility
for OTA updates. If not connected, it defaults to the MeshCore-OTA
SoftAP. This change improves the user experience by allowing easier
access to OTA updates without needing to switch networks.
Updated the otaFromManifest method to stream-parse the firmware manifest
directly from the network, reducing peak RAM usage during OTA checks. This
change enhances compatibility with slow TLS links by implementing a per-read
timeout, ensuring a more efficient and reliable update process.
Updated the otaFromManifest method to enforce HTTP/1.0 for better
compatibility with CDNs and to handle empty manifest responses. This
ensures that the JSON parser receives a complete body, preventing
errors during firmware update checks.
Added functionality to support pull-based OTA updates by fetching firmware
from a manifest. The new `otaFromManifest` method allows the system to
check for available updates and flash the firmware if necessary. This
enhancement improves the update process for observer builds using the
MQTT bridge, ensuring a more seamless firmware management experience.
Updated the MQTTMessageBuilder to include microsecond precision in the
timestamp formatting. The formatIsoTimestampForMqtt function now accepts
a microsecond parameter, allowing for more accurate time representation.
Modified related functions in MQTTBridge to utilize the new timestamp
formatting, ensuring consistency across MQTT messages.
- Changed the connection details for the `meshat.se` preset from MQTT over TLS to WSS with JWT authentication.
- Updated related documentation to reflect the new connection method and authentication type.
- Removed fixed username/password mention for the `meshat.se` preset in the documentation.
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.
*Background on change:*
This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.
This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!
RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)
Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.
At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.
This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so
the adafruit path also can at least show accurate values instead
of looping negative.
Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps.
*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
flash; written only when iaqAccuracy improves to >= 2, should
keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
mismatch in Bosch's PlatformIO packaging, silly Bosch
One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.
This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.
This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.
*Tests:*
- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
- Introduced a new MQTT preset for NZ Analyzer, including its connection details and JWT authentication.
- Updated documentation to reflect the addition of the NZ Analyzer preset in the slot commands.
- Increased the MQTT preset count to accommodate the new entry.