- Introduced a new method `formatIsoTimestampForMqtt` to centralize ISO-like timestamp formatting for MQTT messages, applying timezone preferences.
- Updated `buildStatusMessage`, `buildPacketJSON`, `buildPacketJSONFromRaw`, and `buildRawJSON` methods to utilize the new timestamp formatting function, improving code clarity and reducing redundancy.
- Adjusted `publishStatusToSlot` and `publishStatus` in MQTTBridge to use the new timestamp formatting method, ensuring consistent timestamp handling across status messages.
- Added guidance for using a single active WSS broker preset in the T-LoRa V2.1–1.6 MQTT observer environments, clarifying that dual TLS sessions may fail due to memory constraints.
- Updated partition table descriptions to reflect the new recommendation for the `LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt` and `LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt` targets.
- Enhanced platformio.ini comments to emphasize the single broker usage and its implications for memory management.
- LilyGo T-LoRa V2.1 observer envs: set ESP32_CPU_FREQ=240 and
MQTT_TASK_STACK_SIZE=16384 only for those targets so classic ESP32
TLS + JWT connect fits the FreeRTOS task; other boards keep the
default 8192 B unless overridden.
- MQTTBridge: use large JSON stack fallbacks only for PSRAM builds when
heap-backed buffers may be null; non-PSRAM paths use the inline
member buffers only, cutting peak stack in status/packet/raw publish.
- MQTTBridge.h: update the StaticJsonDocument comment (no longer refers
to an 8 KiB MQTT task stack).
Added support for `LilyGo_TBeam_1W_repeater_observer_mqtt` and `LilyGo_TBeam_1W_room_server_observer_mqtt` in the MQTT implementation documentation. Updated partition table references to `default_16MB.csv` for these observers, clarifying the requirements for flashing firmware and the implications for stored settings. Enhanced the platformio configuration for both observer types, including build flags and dependencies.
Added ColoradoMesh as a new built-in preset in the MQTT bridge documentation. Updated relevant sections to reflect this addition, including command examples and notes on topic templates. This enhances the flexibility and options available for MQTT connections.
Implemented a new function to strip surrounding quotes from strings in TxtDataHelpers, enhancing string manipulation capabilities. Updated CommonCLI to handle MQTT origin configuration, allowing for both setting and clearing of the mqtt.origin preference. This change improves the flexibility of MQTT origin management in the CLI.
Updated the MQTT message structure to add a new field for repeat status, allowing the indication of forwarding status as "on" or "off". This change includes modifications to the MQTTMessageBuilder and related documentation to reflect the new parameter. Additionally, updated CLI command documentation to clarify flooding behavior in different firmware versions.
Updated MyMesh implementations in simple_repeater and simple_room_server to set mqtt_origin to an empty string, allowing the effective origin to follow node_name during publishing. Introduced new functions in MQTTBridge to manage effective origin retrieval and refresh from preferences, ensuring consistent behavior across MQTT operations. This change simplifies the origin management and enhances clarity in the codebase.
This slipped through in PR #2327 and I noticed because the TechoBoard.h
for my variant doesn't include the Wire header, so the source file
in question does not coincidentally obtain a copy.
The `::init` method in the Adafruit ST7789 library is responsible to
initialize the device. This includes performing a reset, which can be
found in the Adafruit source for `Adafruit_SPITFT`.
Before this change, MeshCore performed its own ST7789 display reset
sequence, which consisted of three steps.
* Pull reset low
* Wait 10ms
* Pull reset high
Importantly, there was no fixed delay after pulling reset high. The
ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode
and 120ms in Sleep Out Mode before it will properly receive commands.
When `Adafruit_SPITFT` resets the device after MeshCore has already
reset it, the mandatory time may not have elapsed, leading to strange
behavior. In the author's case, this issue caused the initial
`fillScreen` to fail, such that the display showed an uninitialized
framebuffer.
This removes the MeshCore delay, leaving the responsibility of reset to
`Adafruit_SPITFT`, where they have the correct delays in place with
extra safety margin. The change was briefly tested by Josiah VanderZee
and Ben Zignego on a custom hardware build using an nRF52840 Dongle and
an Adafruit 4311 TFT display. The user button seemed to behave
strangely, but the display looked correct.
Introduced new PlatformIO environments for the LilyGo T-LoRa V2.1-1.6 board, including `LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt` and `LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt`. These environments optimize flash usage by omitting the `sensor_base` and include specific build flags and dependencies for enhanced MQTT capabilities. Updated documentation to reflect changes in partition table handling and NVS settings during firmware updates.