boards/tracker-t1000-e.json set the application's usb_product to
"T1000-E-BOOT". PlatformIO's nordicnrf52 builder turns that key into
-DUSB_PRODUCT, which lands in the USB device descriptor, so a running
node enumerates as "T1000-E-BOOT" while the Seeed bootloader enumerates
as "T1000-E". The firmware that is not the bootloader is the one wearing
the bootloader's name.
That misidentification is load-bearing in the web flasher.
flasher.meshcore.io calls navigator.serial.requestPort() with no filters,
so the row label in the browser's port chooser -- which the browser builds
from the USB iProduct string -- is the only signal the user has. The nRF52
flow prompts twice, once for the 1200-baud DFU touch and again for the
flash itself, with no re-enumeration watcher in between, and at that
second prompt the two candidate rows read:
T1000-E-BOOT (239a:8029) <- the application
T1000-E (2886:0057) <- the actual bootloader
which is backwards at the moment the user has to tell them apart.
The same define is also the Adafruit core's CFG_DEFAULT_NAME, so it is
what a companion advertises over BLE whenever the intended name is too
long for the GAP device-name attribute and setName() silently fails
(#1769). The string is user-visible over Bluetooth as well.
Name the application after the firmware it runs rather than after the
board. This deliberately differs from the hardware-name convention in the
other nRF52 board files ("WisCore RAK4631 Board", "Seeed Wio Tracker L1")
because the string's job here is to distinguish the running application
from a bootloader that will never claim to be MeshCore; "Seeed T1000-E"
would sit one word away from the bootloader's "T1000-E".
Upload and flashing are unaffected -- PlatformIO's port autodetect matches
on hwids (VID:PID), not on this string. On Linux the /dev/serial/by-id
symlink does change, from usb-Seeed_Studio_T1000-E-BOOT_<serial>-if00 to
usb-Seeed_Studio_MeshCore_T1000-E_<serial>-if00, so anything pinned to the
old path needs updating.
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
Credit: @yellowcooln (PR #12). Adds Wireless Tracker v1.1 board
def and MQTT observer envs for v1.1/v2; gate FEM control so v1.1
builds without KCT8103L pins.
Integrates Mike Carper's transmission-reliability work (direct retries with
SNR-adaptive backoff and CR, flood retry controls, alt-path replies, flood
channel gates) plus its upstream/dev base (as of 2026-07-06) on top of the
observer stack. The flex branch is untouched; this branch is the experimental
integration line.
Conflict-resolution decisions, for future re-syncs (git rerere is enabled and
has recorded these):
- NodePrefs adopts keymind/upstream member order + retry/flood tail. Member
order is in-memory only: /com_prefs stays field-by-field with the same
canonical file order both sides already share through offset 294; keymind
appends the retry tail at 295+ (new canonical size 676). Flex fleet files
load unchanged; retry fields default via direct_retry_prefs_magic.
- loadPrefsInt keeps the fork's legacy MQTT-gap recovery but moves its
detection boundary from 'extra > 5' to 'extra > LEGACY_MQTT_GAP_3SLOT (864)'
so keymind-size tails take the normal read path. COM_PREFS_TAIL_BYTES
retired.
- Dispatcher/RadioLibWrappers: fork watchdog additions + keymind TX overrides
and CAD busy counter are unioned; RxReservePacketManager::queueOutbound
follows upstream's new bool return (false when shedding).
- CommonCLI: fork observer dispatch + versioned /mqtt_prefs machinery kept;
keymind CLI (retry/flood/radioat) taken; duplicate CAD/FEM handlers and
sanitise lines deduped (kept keymind placements to minimize future diff).
- MyMesh (repeater/room): fork alerter/OTA/observer wiring kept; keymind
scheduled-radio system replaces the old pending_* temp-radio members;
applySavedRadioParams() replaces raw setParams at startup.
- ESP32Board: fork manifest-OTA + keymind powerOff/deepSleep and stopOTAUpdate
unioned; startOTAUpdate keeps fork's STA-aware IP with keymind's idempotency
guard.
- build.sh taken wholesale from keymind (fleet builds use GH Actions).
Verified: Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater,
heltec_v4_repeater_observer_mqtt, Heltec_v3_room_server_observer_mqtt build;
host migration harness (13 MQTT + non-MQTT scenarios) passes with updated
expectations (676-byte /com_prefs; odd-size files normalize on save, not
load); native unit tests 13/13.
Added support for `LilyGo_TBeam_1W_repeater_observer_mqtt` and `LilyGo_TBeam_1W_room_server_observer_mqtt` in the MQTT implementation documentation. Updated partition table references to `default_16MB.csv` for these observers, clarifying the requirements for flashing firmware and the implications for stored settings. Enhanced the platformio configuration for both observer types, including build flags and dependencies.
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button
Reverted prior dev merge, then merged current meshcore-dev dev. Resolved
CommonCLI by restoring MQTT prefs flow with upstream com_prefs layout
(rx_boosted_gain at offset 79), rxgain CLI, poweroff/shutdown, and FEM
variant files from upstream.
Made-with: Cursor
mikecarper
Michael Jensen
Florent
Hacuchino-hash
taco
Alexander Hoffer
agessaman
ripplebiz
Quency-D
liamcottle
Quency-D
Kevin Le
Sefinek
Chris
me