Fix T1000-E application reporting the bootloader's USB product name

boards/tracker-t1000-e.json set the application's usb_product to
"T1000-E-BOOT". PlatformIO's nordicnrf52 builder turns that key into
-DUSB_PRODUCT, which lands in the USB device descriptor, so a running
node enumerates as "T1000-E-BOOT" while the Seeed bootloader enumerates
as "T1000-E". The firmware that is not the bootloader is the one wearing
the bootloader's name.

That misidentification is load-bearing in the web flasher.
flasher.meshcore.io calls navigator.serial.requestPort() with no filters,
so the row label in the browser's port chooser -- which the browser builds
from the USB iProduct string -- is the only signal the user has. The nRF52
flow prompts twice, once for the 1200-baud DFU touch and again for the
flash itself, with no re-enumeration watcher in between, and at that
second prompt the two candidate rows read:

  T1000-E-BOOT (239a:8029)   <- the application
  T1000-E      (2886:0057)   <- the actual bootloader

which is backwards at the moment the user has to tell them apart.

The same define is also the Adafruit core's CFG_DEFAULT_NAME, so it is
what a companion advertises over BLE whenever the intended name is too
long for the GAP device-name attribute and setName() silently fails
(#1769). The string is user-visible over Bluetooth as well.

Name the application after the firmware it runs rather than after the
board. This deliberately differs from the hardware-name convention in the
other nRF52 board files ("WisCore RAK4631 Board", "Seeed Wio Tracker L1")
because the string's job here is to distinguish the running application
from a bootloader that will never claim to be MeshCore; "Seeed T1000-E"
would sit one word away from the bootloader's "T1000-E".

Upload and flashing are unaffected -- PlatformIO's port autodetect matches
on hwids (VID:PID), not on this string. On Linux the /dev/serial/by-id
symlink does change, from usb-Seeed_Studio_T1000-E-BOOT_<serial>-if00 to
usb-Seeed_Studio_MeshCore_T1000-E_<serial>-if00, so anything pinned to the
old path needs updating.
This commit is contained in:
Michael Jensen committed 2026-08-15 23:58:49 -06:00
1 parent d929643524
commit 3641e3bb23
1 file changed
+1 -1
+1 -1
View File
@@ -13,7 +13,7 @@
["0x239A", "0x002A"],
["0x239A", "0x802A"]
],
"usb_product": "T1000-E-BOOT",
"usb_product": "MeshCore T1000-E",
"mcu": "nrf52840",
"variant": "Seeed_T1000-E",
"bsp": {