Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.
Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
Default fresh settings to sound off and vibration on, and keep existing saved choices. Apply changes immediately across all three UIs and make custom notification patterns respect the same mute controls.
Keep the Wio Mini Companion within its existing flash boundary by storing its LED switch in a reserved preference byte and shortening CLI help without removing commands. Add coverage for live output changes, persistence, and storage failures.
Adapted from https://github.com/meshcore-dev/MeshCore/pull/3603.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
Document the tested firmware source, thirteen build targets and fifteen memory profiles. Record nine USB passes, eight BLE passes and six two-way RF links while retaining the incomplete hardware checks and earlier bootloader evidence. Include the measured V3 contact refresh improvement and cleanup evidence.
Add receive-only same-image display, SPI, modem/IQ-cache and scoped-priority experiments with checkpointed collectors. Keep rejected clock-phase correction and elevated-priority experiments out of production.
Publish sanitized timing data, Full Companion/Bluetooth/USB checks and redraw measurements with their limits. Wire the new behavioral checks into CI.
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.
Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
Deduplicate validation and preserve the published preference bytes and transactional saves. Correct Ikoka Handheld Companion flash bounds and document QSPI Room migration. Qualify STM32 and RAK4631 at the full 1.18.0.1 release version length.
Integrate fractional Companion timezones and conditional Bluetooth pages while preserving the existing preference byte layout, transactional saves, and Full transport selector. Add migration, rollback, invalid-value, and UI profile regressions.
The Wi-Fi, LoRa first-stage and Partition Expander bridges serve an
unauthenticated /update behind an AP whose password was fixed and published,
so anyone in range during a migration could upload firmware while the private
key is staged. Use the old node's saved admin password as the WPA2
passphrase, read from /com_prefs or /node_prefs at offset 56 as the firmware
loads it. The operator already used that password to start the old updater.
Fall back to the published password, with a serial warning, when the saved
admin password is missing, unreadable, shorter than 8 characters or not
printable ASCII, so no node becomes unreachable. The legacy filesystem is
mounted without formatting and the password is never printed. Migration
admission, flash sequencing, /update gating and the USB bridge are unchanged.
Update both guides and the package README.
Add a sanitizer-backed host test that compiles the bridge's actual Wi-Fi
block against fake SPIFFS and WiFi: both boots, file precedence, WPA2 length
and terminator bounds, printable characters, stock 1.10/1.11 file sizes,
truncated fields, and mount, seek and partial-read failures. It fails 8 of 8
on the previous code and catches 27 of 27 code mutations. Verified 13 related
host test files and the esp32_s3_4mb_partition_migrator build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mikecarper
nullrouten0andClaude Opus 5.5