Commit Graph
1700 Commits
Author SHA1 Message Date
Quency-D 7d501681bc fix-heltec_v4r8-lna 2026-09-03 17:57:09 +08:00
Kevin Le 374aba4fce Disabled button press which prevents TLoRa repeater to boot 2026-09-02 17:45:12 +07:00
mikecarper 4d89de8544 Improve companion setup and USB session recovery 2026-09-02 03:44:28 -07:00
agessaman 366b086713 feat: add automatic network failover 2026-09-01 21:18:22 -07:00
mikecarper 9816e21834 Harden nRF52 OTA, USB sessions, and T096 controls
Bind Companion replies to request transports, make dual-CDC USB sessions nonblocking and reconnect-safe, and harden nRF52 watchdog/OTA storage paths. Fix T096 button debounce, display wake, sleep races, and the compact message layout; add exact WisBlock OTA profiles plus expanded native/static/HIL documentation.
2026-09-01 20:51:43 -07:00
agessaman 03c0ad81fe feat: abstract MQTT network transport 2026-09-01 16:31:28 -07:00
Liam Cottle 65aa1138ae Merge pull request #3319 from oltaco/w12_txpower
Fix Meshnology W12 TX power
2026-09-01 23:06:58 +12:00
mikecarper 5de1820765 Unify companion BLE and WiFi setup flows 2026-09-01 01:25:00 -07:00
mikecarper 6df9a9f686 Keep Indicator RGB scanout alive during expander recovery 2026-08-31 19:10:54 -07:00
mikecarper 260b07999e Recover Indicator display after warm reset 2026-08-31 19:06:07 -07:00
mikecarper ba452de3c9 Add SenseCAP Indicator N16R2 profile 2026-08-31 18:29:38 -07:00
mikecarper ec94ac44ae Add Indicator WiFi setup as eighth home page 2026-08-31 17:31:48 -07:00
mikecarper 0496affcf8 Keep Indicator setup text large on fallback canvas 2026-08-31 16:36:46 -07:00
mikecarper 4bbdf4b071 Enlarge Indicator native setup screen 2026-08-31 16:10:03 -07:00
mikecarper 164a6e8227 Fix Indicator transport taps and fresh LoRa defaults 2026-08-31 15:56:54 -07:00
mikecarper 2e026caf4a Improve Indicator transport touch UI 2026-08-31 15:11:11 -07:00
mikecarper 5af7b73ff9 Add safe ESP32 transports and Indicator UI
Reserve board-specific GPIOs, make ESP-NOW channel/format handling configurable, and coordinate WiFi, BLE, NTP, MQTT, and host actions safely.

Add the Indicator message page, exclusive transport selector, dynamic 480/320 rendering, larger transport typography, pairing cleanup, and corresponding tests and documentation.
2026-08-31 14:29:42 -07:00
Kevin Le fde20d37d0 Added heltec_tracker_v2_companion_radio_usb_femoff and heltec_tracker_v2_companion_radio_usb_femon 2026-08-31 17:17:15 +07:00
Aleksei Mamlin 1d9a62ca4a companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
mikecarper 8920c35da5 Harden marathon-tested OTA and hardware paths
Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
2026-08-30 19:26:15 -07:00
mikecarper 256eb26b17 fix: reserve Indicator heap for BLE and WiFi 2026-08-29 16:13:47 -07:00
mikecarper e7962f9598 Fix release matrix gaps and add background builds 2026-08-29 14:55:07 -07:00
taco e6897e8bb7 fix Meshnology W12 TX power 2026-08-29 15:22:54 +10:00
Adam Gessaman da6bab3e83 Merge upstream/dev into observer-firmware-dev 2026-08-28 19:45:59 -07:00
mikecarper da61c48e7b feat: integrate R8 observer and companion updates 2026-08-28 18:39:26 -07:00
mikecarper c24bc82814 Merge upstream dev companion CLI updates 2026-08-28 17:31:28 -07:00
mikecarper 2b3b93ab2f fix: harden ESP-NOW and full companion networking
Add selectable shared ESP-NOW channels, raw/wrapped bridge compatibility, and bounded fragmentation for maximum-size packets.\n\nGive ESP32 Full profiles WiFi coexistence, stabilize WebConfig and USB terminal lifecycles, and keep disabled bridges stopped during observer updates.\n\nUpdate generated UI, firmware selection, documentation, and regression coverage.
2026-08-28 16:36:34 -07:00
agessaman 4098ace5be fix(display): default the R8 portrait panels to DISPLAY_ROTATION=0
Rotation 2 was consistently upside down on the Expansion Kit V2 panel, so 0
becomes the compiled default for both portrait observer targets.

display.flip is unchanged and still defaults to off: the compiled constant
should be the correct orientation, with the setting reserved for a board
mounted the other way up. A node already carrying `display.flip 1` from
testing needs `set display.flip 0` after this.

Landscape targets are untouched - they take the driver's own DISPLAY_ROTATION
default of 3.
2026-08-28 15:45:19 -07:00
agessaman 5da46cc518 fix(display): make the USER button click immediate, 3 s hold to power off
Power-off now needs a 3 second hold; any shorter press toggles the display.
MomentaryButton reports a CLICK for any release short of its threshold, so
that single value defines both.

The button also felt unreliable - "a brief press doesn't wake it, more often
than not". MomentaryButton's multi-click detection withholds a CLICK for
MULTI_CLICK_WINDOW_MS (280 ms) after release, and folds a second press
arriving inside that window into a DOUBLE_CLICK. Since the handler only acts
on CLICK, an impatient second press produced nothing at all: press, see
nothing, press again, still nothing. Multi-click is now off for these targets,
so CLICK fires on release.

Both settings are build flags defaulted in variants/heltec_v4_r8/target.cpp
and overridden only on the two TFT observer bases, because the companion
builds share this user_btn and do use double/triple click.

DISPLAY_TOUCH_DEBUG additionally logs which input caused a toggle
("Display: button -> on"), so any remaining flake can be attributed to the
button or to a spurious touch read rather than guessed at.
2026-08-28 15:37:09 -07:00
agessaman 11d7551ccd fix(display): correct R8 touch decode, display wake and power-off
Four defects found by hardware testing of the Expansion Kit V2.

Touch never registered. The panel's controller does not use the point-count
encoding the reference CHSC6X drivers document: byte 0 reads 0x00 idle and
0x1F while a finger is down, so testing for a count of 1 never fired. A
partly-failed read leaves 0xFF, which must not count as a press either, so
the test is now != 0x00 && != 0xFF.

Touch polling could stall the UI loop for ~1 s at a time. The controller
NACKs its address whenever it has nothing to report, and calling requestFrom()
unconditionally logged a bus error on every 50 ms poll and, once the bus
wedged, burned a full ESP_ERR_TIMEOUT inside loop(). Probe the address first,
which reports the same NACK quietly, and bound the read with setTimeOut().

The display could not be woken once it blanked; only RST brought it back.
turnOn() re-ran the whole display.init(), which re-enters SPI setup, spends
~500 ms in Adafruit's reset delays and pulses GPIO 21 - the line shared with
TP_RST, so it reset the touch controller on every wake. Since turnOff() no
longer parks that line low, the panel stays configured while dark and waking
is just the backlight. Toggling also clears the refresh deadline so the
current frame is drawn immediately instead of the stale one.

Power-off rebooted instead of staying off. powerOff() went through
enterDeepSleep(), which always arms an ext1 wake on P_LORA_DIO_1; a deep-sleep
wake is a full reboot, so a node in live traffic restarted within seconds of
showing "Turning OFF". It now disables every wake source, so the node stays
down until RST or a power cycle.

Note that the display off/on cycle had never been exercised on this board
before: observer builds pinned AUTO_OFF_MILLIS=0, so the panel never blanked
until display.timeout made it a runtime setting.
2026-08-28 14:26:52 -07:00
agessaman 5d56267176 feat(display): add R8 observer TFT dashboard, touch toggle and display.timeout
Replace the sparse Heltec V4 R8 observer home screen with a padded dark
analytics dashboard, add manual display control, and make blanking a runtime
setting.

Dashboard (DISPLAY_ACTIVITY_DASHBOARD, the four R8 TFT observer envs):

- RadioActivityWindow: 20 one-minute buckets of valid RX packets, no heap.
  The caller's 32-bit millis() is extended to a monotonic 64-bit clock, so
  nothing downstream has a rollover case; an always-on node passes 2^32 ms
  after ~49.7 days, which would otherwise re-enter warm-up and divide 20
  minutes of traffic by seconds. Rates use 19 whole minutes plus the elapsed
  part of the current one rather than a fixed 1200 s.
- ObserverDashboard: header, radio strip, headline totals, a 20-bar
  packets-per-minute graph and RF/status footers, with separate portrait and
  landscape layouts. A text row is a fixed 16 px, which is 3.2 logical units
  in portrait but 4.27 in landscape, so one shared grid would overlap.
  Text is trimmed by character budget, not measured width: getTextWidth()
  reports an over-long string at the portrait driver's fallback scale, so
  DisplayDriver::drawTextEllipsized() under-trims and the row renders at half
  height.
- Six per-row signatures computed from what is actually drawn, so only the
  rows whose pixels changed repaint. No startFrame(), no whole-screen clear.
  Link state moved out of the full-frame signature, so a DHCP renewal or WiFi
  flap repaints one footer row instead of the panel.
- Dark theme by retuning the UIColor statics at runtime, which needs no
  display-driver edit and carries boot, setup, reboot and power-off with it.

Touch and button (DISPLAY_TOUCH_TOGGLE):

- CHSC6X at I2C 0x2E, polled; TP_INT is unusable (optional R13, and GPIO 43
  is U0TXD). The point-count byte is tested against a valid count, never
  against non-zero: an idle read returns 0xFF, which reads as a finger held
  down forever and latches the tap detector after one event.
- turnOff() no longer parks PIN_TFT_RST low on this board. GPIO 21 is a
  shared LCD_RST/TP_RST net, so doing that held the touch controller in
  reset for as long as the display was off. Verified against Heltec's
  expansion-board and mainboard schematics and the V4-R8 datasheet pinout,
  which also correct the pin comment in HeltecV4R8Board.cpp.
- The USER button click now toggles the display too; it previously did
  nothing whenever the display was already on.

display.timeout:

- `set display.timeout <secs>` / `get display.timeout`, 0 = stay on, 60 s
  default, 3600 max. Read live, so a change applies without a reboot and
  restarts the countdown rather than firing on the old deadline.
- Stored in MQTTPrefs (/mqtt.json), keeping NodePrefs aligned with upstream.
  Runtime-only: LegacyV1MQTTPrefs and the four frozen binary payload sizes
  are unchanged. No JSON format-version bump - the loader skips keys no
  def() claims, so older firmware reads newer files and this firmware reads
  older ones with the default applied. Both directions are covered by tests.
- Joins the observer atomic-setter contract, so a failed save rolls the live
  value back instead of only claiming to.

New periodic work uses a wrap-safe deadline check; `millis() >= deadline`
fires every loop for a whole interval before each rollover.

Adds test_radio_activity_window, test_observer_dashboard (driving the real
renderer against a recording DisplayDriver in both orientation profiles) and
test_touch_tap_detector. 440 native cases pass.
2026-08-28 13:39:16 -07:00
agessaman 0d2c926a07 feat(display): add R8 portrait observer layouts 2026-08-28 09:21:38 -07:00
mikecarper c6476b8ba8 feat: consolidate full companion runtime profiles 2026-08-28 08:47:26 -07:00
agessaman c0a7cf7930 fix(boards): update Heltec V4 R8 TFT LEDA control to active HIGH 2026-08-28 07:44:16 -07:00
mikecarper d17c250137 fix: port T-Beam 1W hardware corrections
Adapt the validated fan thermostat, battery ADC calibration, GPS baud, SX1262 register patch, and 1700us PA ramp behavior from mintylinux/Meshcore-T-beam-1W-Firmware to the current board architecture. Also make Arduino 3 full-build dependency switching reliable after standard ESP32 builds and guard the release hardware contract with regression coverage.
2026-08-27 18:58:37 -07:00
mikecarper a0165cb38b fix: harden CLI and GPS handling 2026-08-27 17:59:44 -07:00
mikecarper 5a26d4ddd1 fix: stabilize Heltec RC32 startup 2026-08-27 17:06:20 -07:00
mikecarper e5fd77e53f feat: add Bluetooth-controlled LoRa OTA
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
2026-08-27 01:22:18 -07:00
Liam Cottle 1c3248902a Merge pull request #3298 from meshcore-dev/companion-cli
Companion CLI
2026-08-27 18:17:10 +12:00
mikecarper 91870e4bb0 fix: harden firmware builds and runtime reliability 2026-08-26 15:42:12 -07:00
mikecarper ce7e65314d fix: preserve board features in full companion profiles 2026-08-26 13:49:55 -07:00
mikecarper 83e402bd4d fix: preserve complete companion build profiles 2026-08-25 23:47:40 -07:00
mikecarper 42b6a0df60 feat: retain INA monitors in reduced RAK repeaters 2026-08-25 20:24:17 -07:00
mikecarper 9d57a3a4f8 feat: complete Cascade Indicator companion support
Add native-resolution Indicator UI, touch navigation, SD-backed pixel and emoji fonts, LoRa radio support, dual-slot WiFi Companion provisioning, and mesh clock fallback. Harden radio recovery and build defaults, normalize ESP32 setup-AP protocols, and document/test the operator workflows.
2026-08-25 18:37:17 -07:00
Alex Beal 0908b03491 Fix: Do not misidentify IMU as an RTC on Heltec T1
The T1 has an ICM-42607-P IMU with the same address as a DS3231 RTC.
This completely breaks the clock on the T1. Reading the time results in
a garbage value, causing all sorts of strange issues. The time never
advances, which breaks logging in to repeaters (due to their time-based
replay protection).

This simply disables the probe on the I2C line. The DS3231 doesn't have
a WHO_AM_I register that could be used to prevent misidentifying it, so
this simpler fix is used.
2026-08-25 15:00:45 -06:00
mikecarper 1792acda6a Harden external radio recovery and power limits 2026-08-25 10:27:26 -07:00
Scott Powell 9ab13158cb * fix for RPI Picow 2026-08-25 19:04:32 +10:00
mikecarper 7077283e95 Make RXPS preamble adaptive for fast radio settings 2026-08-24 20:42:54 -07:00
mikecarper 4a4a795f52 Harden recoverable external radio startup 2026-08-24 16:54:41 -07:00
mikecarper ba70c5b3c6 Harden fast RXPS timing and board behavior 2026-08-24 15:10:54 -07:00