Commit Graph
1700 Commits
Author SHA1 Message Date
mikecarper 66b605a49d Add Wi-Fi OTA partition migration support 2026-09-19 20:14:37 -07:00
liamcottle 4021a341f8 add wifi support to thinknode m7 ble variant 2026-09-20 15:11:21 +12:00
agessaman 854d4e2ec3 feat(thinknode-m7): make the MQTT observer envs Ethernet-preferred
Fold the CH390 overlay and NETWORK_PREFER_ETHERNET into
ThinkNode_M7_{repeater,room_server}_observer_mqtt and drop the separate
*_observer_mqtt_ethernet twins. The env names (and so the OTA manifests)
are unchanged, so existing M7 observers OTA into the Ethernet-preferred
image; without a cable they select stored Wi-Fi after a brief boot probe.
2026-09-19 10:14:23 -07:00
agessaman 8ab6a988aa Merge branch 'observer-firmware-dev' into feat/abstract-networking 2026-09-19 09:23:32 -07:00
agessaman 1b269acc02 Restore WiFi flags dropped from ThinkNode M7 companion wifi env in upstream merge
The upstream/dev merge kept our side of variants/thinknode_m7/platformio.ini,
losing -D ENABLE_WIFI_INTERFACE and +<helpers/wifi/*.cpp>. Companion WiFi is
now gated on that flag, so the env built silently without WiFi.
2026-09-19 09:10:32 -07:00
Kevin Le d9c42964eb Added enterDeepSleep() for NRF52 and shutdownPeripherals() for ESP32 2026-09-19 18:37:03 +07:00
mikecarper a37c345dbe Fit Wio companion USB logging 2026-09-18 11:24:18 -07:00
mikecarper 5f7d03373c Fix capacity matrix build regressions 2026-09-17 23:54:11 -07:00
agessaman 77398bfc89 Merge upstream/dev into observer-firmware-dev 2026-09-17 21:19:23 -07:00
liamcottle cd54ee9754 add missing null display driver class for thinknode m7 ethernet variant 2026-09-17 15:52:46 +12:00
mikecarper 1c557b4391 Merge latest PowerSaving-v17 while preserving shared GPS power control 2026-09-15 20:52:23 -07:00
mikecarper 4139e7e24d Merge meshcore-dev dev with companion and board integrations 2026-09-15 20:51:43 -07:00
Kevin Le bbcec95538 Added heltec_tracker_v2_companion_radio_ble_femoff 2026-09-16 09:48:16 +07:00
Kevin Le 9cd7a847bf Added BSEC to RAK3401 2026-09-16 09:25:02 +07:00
Frieder Schrempf 9d0e2f2fac Merge branch 'dev' into dev 2026-09-15 22:59:09 +02:00
Scott Powell 3a3c13a143 * refactor to support new Board::handleCommand(), and "get/set radio.fem.*" commands 2026-09-15 18:41:11 +10:00
Scott Powell 53b6476409 Merge branch 'dev' into wio-tracker-L1-1W 2026-09-15 18:24:52 +10:00
Avamander 61fcc49c8a Fix Heltec Mesh Node T1 GNSS pins 2026-09-14 17:53:50 +03:00
mikecarper bd30388436 Speed up SX1262 profile switching and verify radio lab behavior
Keep TCXO warm during owned dual-profile retunes, batch modulation setup, and enable guarded fast RX with buffered 8 MHz SPI on XIAO S3 WIO and Indicator LoRa. Preserve lifecycle invalidation, packet guards, rollback, and existing scheduling budgets.

Add reliable sequence-scoped USB lab transport, native regression coverage, bounded channel and preamble diagnostics, and byte-exact measurement records including failed experiments and qualification limits.
2026-09-14 01:22:09 -07:00
Kevin Le 9a1be4bc70 Removed BME680 BSEC for RAK3401 2026-09-14 08:47:21 +07:00
TadyTheFish a88de69486 Enable INA226 support for ProMicro nRF52840 2026-09-13 08:27:48 +02:00
ripplebiz 34404309ae Merge pull request #3350 from Quency-D/fix-heltec_v4r8-lna
fix-heltec_v4r8-lna
2026-09-13 12:05:35 +10:00
ripplebiz 000a1b6cda Merge pull request #3371 from agessaman/feat/tbeam-1w-thermal-fan
Add thermal fan control for T-Beam 1W
2026-09-13 12:01:37 +10:00
21cdd7b319 Add Muzi Base board support (Duo + Uno + SuperIO)
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.

SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.

Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).

Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.

Co-authored-by: lbibass <ewdries02@gmail.com>
Co-authored-by: Andy Shinn <andys@andyshinn.as>
2026-09-12 05:41:26 -07:00
Kevin Le 22fdd862d2 Fixed firmware upload for wio_wm1110 2026-09-12 12:40:34 +07:00
mikecarper 1a074116e8 Merge PR #7 with reviewed ExpressLRS power and memory fixes
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.

Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.

Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
2026-09-10 22:06:16 -07:00
mikecarper 96ef0ae905 Add configurable battery and USB display behavior
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.

Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
2026-09-10 21:03:15 -07:00
mikecarper a60a6a1f60 Merge PowerSaving-v17 and harden noise calibration and RX recovery
Port the measured RXPS model without changing Cascade wire preambles or automatically enabling experimental levels. Use a spaced weighted median with bounded calibration windows, preserve packet ownership across CAD, and check actual SX126x receive mode before recovery.

Preserve Cascade sleep and radio fixes, integrate the new sensor and board profiles, and correct BSEC script inheritance and the MKE UART pin conflict. Native regressions, production-method/SPI harnesses, and ESP32, nRF52, and STM32 builds pass. Hardware comparison and fault-injection validation are recorded privately.
2026-09-10 13:19:22 -07:00
mikecarper 9d58d66fb7 Fix touchscreen navigation and add runtime touch diagnostics 2026-09-09 17:38:41 -07:00
MUSTARDTIGERFPV 3f6cbf636d Restore the full repeater feature set on the LINKFLOW 900
The variant carried a "classic ESP32 DRAM strip": MAX_CLIENTS cut from 32 to
2, the flood rule engine and group moderation compiled out, and the filter,
scope and moderation tables cut to a single slot each. All of it existed to
squeeze fixed .bss tables into classic ESP32's ~124 KiB static DRAM window.

Those tables now live on the heap, so the strip buys nothing. Removing it also
clears a real trap: with two client slots, once both held a protected manager
(admin, region manager or filter manager) putClient() could no longer allocate,
and every further admin login was refused with no reply to the operator.

Static DRAM with the full feature set restored:
  70,764 / 124,580 occupied, 53,816 free (8,192 required)
2026-09-09 01:36:09 -07:00
MUSTARDTIGERFPV a413a361dd Add GEPRC LINKFLOW 900M TX variant
An ExpressLRS 900 MHz transmitter module: ESP32-D0WDQ6, 4 MB flash, SX1276
driving an external PA through a DAC gain input on GPIO26.

Pin values come from the ExpressLRS hardware layout for this target
(Unified_ESP32_900_TX). The board brings out only RX_EN, so RadioLib's
single-pin RF switch handling covers it. Note GPIO12 is both RX_EN and the
MTDI flash-voltage strapping pin, so it must stay low through reset.

Verified on hardware: boots, radio initialises, TX power changes take
effect and are rejected outside the configured range, and the node repeats
flood traffic.

Uses dual_ota_1536k.csv, and 115200 for upload because the CH340 on this
board corrupts transfers above 230400.
2026-09-09 01:24:38 -07:00
MUSTARDTIGERFPV f0c4c6af00 Enable the on-demand mOTA context for every classic ESP32 build
Move OTA_HEAP_CONTEXT from two hand-edited envs to a pre-script gated on
build.mcu == "esp32", so every classic ESP32 image gets it and none can drift.
S2/S3/C-series and nRF52 keep the .bss singleton: they have no equivalent
static-DRAM ceiling, so there a guaranteed-present workspace is the better
trade for what is ultimately a recovery path. It has to be a build flag rather
than a header default, because OTA_HEAP_CONTEXT must hold the same value in
every translation unit that sees OtaContext.h - OtaContext.cpp included - and a
header test on CONFIG_IDF_TARGET_ESP32 would depend on include order relative
to sdkconfig.h. The script defers to OTA_SHARED_COMPANION_QUEUE where a Full
Companion recipe already owns the storage.

Fix a gap this exposes in the roles that now use it. Only CLI entry points
acquire the context, so once it was released, a repeater with the temporary
radio profile up would no longer serve or announce its own firmware - LoRa OTA
would look enabled and silently do nothing. ota_service_temp_radio_context()
holds the workspace for exactly the temp-radio window and hands it back
outside it, which is where the saving was coming from anyway. Wired into the
repeater, room server and sensor loops; the Companion keeps its own
acquire-on-host-demand policy, since its context is borrowed from the offline
message queue and must not be taken speculatively.

Static DRAM, classic ESP32 (bytes occupied of a 124,580 region):
  Heltec_v2_repeater                   108,332 -> 70,732
  Heltec_v2_room_server                 83,716 -> 68,300
  Heltec_v2_companion_radio_ble        123,236 -> 107,772  (was failing on main)
  Tbeam_SX1262_repeater                 86,932 -> 71,468
  Tbeam_SX1262_repeater_observer_mqtt  121,132 -> 83,532   (was failing)
2026-09-09 01:24:00 -07:00
MUSTARDTIGERFPV afa1036304 Move large repeater tables off classic ESP32 static DRAM
Classic ESP32 links into a dram0_0_seg of only 124,580 bytes: memory.ld
carves the BT controller's 0xdb5c (56,156) reservation off the 0x2c200
window before the application gets any. Three large objects dominated what
was left, and Tbeam_SX1262_repeater_observer_mqtt overran the build's 8 KiB
static reserve by 4,744 bytes.

Heap-allocate them instead, each with a defined behaviour when the
allocation fails:

- OtaContext: generalize the Companion's borrowed-storage path behind
  OTA_DYNAMIC_CONTEXT and add OTA_HEAP_CONTEXT, which allocates the context
  on first use and frees it once no transfer, apply or folder link needs it.
  A repeater is idle nearly all the time, so the workspace is usually absent.
  Exhaustion is reported to the caller and the operation declines.
- ClientACL: the client table becomes a pointer with a live capacity;
  capacity 0 refuses new clients rather than writing through a null table.
- MyMesh flood packet filters: likewise, with flood_packet_filter_slots as
  the live bound for every rule loop. At capacity 0 the node forwards
  unfiltered, and both save paths refuse to write so a stored ruleset is
  never replaced by an empty file.

Also override the Arduino SDK's weak btInUse() in simple_repeater so
initArduino() releases the BT controller memory to the heap. That grows the
runtime heap these tables now come from; it cannot recover the same
reservation from the linker's static window.

Static DRAM, classic ESP32:
  Heltec_v2_repeater                   108,332 -> 70,732
  Tbeam_SX1262_repeater_observer_mqtt  121,132 -> 83,532  (was failing)
2026-09-09 01:24:00 -07:00
mikecarper aab46c7c84 Use native display resolution and adaptive typography 2026-09-08 16:02:16 -07:00
liamcottle cee43752c7 add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
Kevin Le 5965010f6b Added BSEC to BME680 2026-09-08 16:40:17 +07:00
Kevin Le 54a79f4a5f Added Xiao_nrf52_repeater_bridge_rs232 2026-09-08 16:37:44 +07:00
mikecarper 09639d7e02 Fix G3 USB sleep and two-minute button wake 2026-09-07 16:28:02 -07:00
Michael Graff 7c2b4d88be WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID 2026-09-06 22:18:00 -05:00
Michael Graff b11a779843 Address review: per-variant wifi src, real SSID reply, rename PicoW env 2026-09-06 21:28:04 -05:00
Michael Graff b9fa450f52 Fix review findings on Pico W WiFi/BLE 2026-09-06 20:43:37 -05:00
Michael Graff 88cc014f55 Add BLE companion support for Pico W 2026-09-06 20:15:45 -05:00
Michael Graff 0b2c47a932 Add WiFi companion support for Pico W
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
2026-09-05 23:15:13 -05:00
agessaman fa5ba6fa5c feat(station-g3): add second RF slot (r2) build targets
The motherboard has two RF daughterboard slots on separate GPIOs, mirrored by
its "LNA P" / "LNA S" jumpers, but the variant only ever pinned slot 1.

The shared configuration moves into [Station_G3_ESP32_common], with the SPI and
LNA lines split into per-slot sections. [Station_G3_ESP32] (slot 1) and
[Station_G3_ESP32_r2] (slot 2) each compose common + their own pins, so neither
set of -D flags has to shadow the other on the compile line - appending an
override would work only by last-wins, and esp32_base's -w hides the resulting
redefinition warning. Every pre-existing env keeps its name and resolves to
byte-identical options; verified by diffing pio project config --json-output.

PA PL1 is one board-level jumper shared by both slots, so P_PA1_EN stays in the
common section along with the TX power calibration.

Adds r2 twins of the repeater, room server and both observer envs, each an exact
mirror of its slot-1 sibling apart from the base it extends.

Slot 2 pins come from on-hardware testing in agessaman/MeshCore#49 and are not
documented publicly; the vendor wiki serves no content to fetchers.

Known limitation, unchanged from that PR: GPIO 42 and 43 fall outside the
ESP32-S3 RTC GPIO range (0-21), so the rtc_gpio_hold_en() calls in
ESP32Board::enterDeepSleep() and StationG3Board::powerOff() return
ESP_ERR_INVALID_ARG on slot 2 and the NSS and LNA pins are not latched through
deep sleep. Fixing it means gpio_hold_en() plus gpio_deep_sleep_hold_en() in
shared code.
2026-09-05 12:14:29 -07:00
mikecarper 8995675e1c Enforce classic ESP32 memory budgets and safe image merging 2026-09-05 08:22:56 -07:00
agessaman 6c1f4c09a6 Fix T-Beam 1W fan races and remove PWM controls 2026-09-04 16:51:53 -07:00
agessaman 8fd6893117 feat: add T-Beam 1W thermal fan control 2026-09-04 16:03:41 -07:00
agessaman a0188bd174 fix(network): harden Ethernet-preferred lifecycle 2026-09-04 08:42:46 -07:00
agessaman fc528ae640 fix(network): set ethernet hostname before startup 2026-09-03 20:47:00 -07:00
Kevin Le 1ce07cd80c Added sensor env 2026-09-03 22:54:35 +07:00