Commit Graph
39 Commits
Author SHA1 Message Date
mikecarper 285267e3a1 Merge meshcore-dev dev with routing, WiFi and power-policy compatibility
Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
2026-10-15 13:30:41 -07:00
Rastislav Vysoky 97c0aec8d6 added dynamic wifi to: heltec wsl3, v4r8, wireless paper; rak 3112; xiao s3 (wio) 2026-10-15 09:57:31 +02:00
mikecarper acc7c8e645 Wake Heltec V4 buttons from power-saving sleep 2026-10-05 23:51:26 -07:00
mikecarper 1e8ef78a2e Merge observer firmware branch into keymindCascade
Integrate compatible observer board, preset, WebConfig, display, CI, and policy updates. Preserve the checkout's newer MQTT binary preferences and WiFi bridge runtime where the forked implementations conflict. Keep ThinkNode observer networking WiFi-based until the Ethernet transport is wired into that runtime.
2026-09-24 01:20:56 -07:00
mikecarper 4176c92462 Merge PowerSaving-v17 into keymindCascade 2026-09-24 00:56:05 -07:00
Kevin Le d9c42964eb Added enterDeepSleep() for NRF52 and shutdownPeripherals() for ESP32 2026-09-19 18:37:03 +07:00
agessaman 77398bfc89 Merge upstream/dev into observer-firmware-dev 2026-09-17 21:19:23 -07:00
mikecarper 4139e7e24d Merge meshcore-dev dev with companion and board integrations 2026-09-15 20:51:43 -07:00
ripplebiz 34404309ae Merge pull request #3350 from Quency-D/fix-heltec_v4r8-lna
fix-heltec_v4r8-lna
2026-09-13 12:05:35 +10:00
mikecarper 96ef0ae905 Add configurable battery and USB display behavior
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.

Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
2026-09-10 21:03:15 -07:00
mikecarper aab46c7c84 Use native display resolution and adaptive typography 2026-09-08 16:02:16 -07:00
liamcottle cee43752c7 add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
Michael Graff b11a779843 Address review: per-variant wifi src, real SSID reply, rename PicoW env 2026-09-06 21:28:04 -05:00
Quency-D 7d501681bc fix-heltec_v4r8-lna 2026-09-03 17:57:09 +08:00
mikecarper 5de1820765 Unify companion BLE and WiFi setup flows 2026-09-01 01:25:00 -07:00
Adam Gessaman da6bab3e83 Merge upstream/dev into observer-firmware-dev 2026-08-28 19:45:59 -07:00
mikecarper da61c48e7b feat: integrate R8 observer and companion updates 2026-08-28 18:39:26 -07:00
agessaman 4098ace5be fix(display): default the R8 portrait panels to DISPLAY_ROTATION=0
Rotation 2 was consistently upside down on the Expansion Kit V2 panel, so 0
becomes the compiled default for both portrait observer targets.

display.flip is unchanged and still defaults to off: the compiled constant
should be the correct orientation, with the setting reserved for a board
mounted the other way up. A node already carrying `display.flip 1` from
testing needs `set display.flip 0` after this.

Landscape targets are untouched - they take the driver's own DISPLAY_ROTATION
default of 3.
2026-08-28 15:45:19 -07:00
agessaman 5da46cc518 fix(display): make the USER button click immediate, 3 s hold to power off
Power-off now needs a 3 second hold; any shorter press toggles the display.
MomentaryButton reports a CLICK for any release short of its threshold, so
that single value defines both.

The button also felt unreliable - "a brief press doesn't wake it, more often
than not". MomentaryButton's multi-click detection withholds a CLICK for
MULTI_CLICK_WINDOW_MS (280 ms) after release, and folds a second press
arriving inside that window into a DOUBLE_CLICK. Since the handler only acts
on CLICK, an impatient second press produced nothing at all: press, see
nothing, press again, still nothing. Multi-click is now off for these targets,
so CLICK fires on release.

Both settings are build flags defaulted in variants/heltec_v4_r8/target.cpp
and overridden only on the two TFT observer bases, because the companion
builds share this user_btn and do use double/triple click.

DISPLAY_TOUCH_DEBUG additionally logs which input caused a toggle
("Display: button -> on"), so any remaining flake can be attributed to the
button or to a spurious touch read rather than guessed at.
2026-08-28 15:37:09 -07:00
agessaman 11d7551ccd fix(display): correct R8 touch decode, display wake and power-off
Four defects found by hardware testing of the Expansion Kit V2.

Touch never registered. The panel's controller does not use the point-count
encoding the reference CHSC6X drivers document: byte 0 reads 0x00 idle and
0x1F while a finger is down, so testing for a count of 1 never fired. A
partly-failed read leaves 0xFF, which must not count as a press either, so
the test is now != 0x00 && != 0xFF.

Touch polling could stall the UI loop for ~1 s at a time. The controller
NACKs its address whenever it has nothing to report, and calling requestFrom()
unconditionally logged a bus error on every 50 ms poll and, once the bus
wedged, burned a full ESP_ERR_TIMEOUT inside loop(). Probe the address first,
which reports the same NACK quietly, and bound the read with setTimeOut().

The display could not be woken once it blanked; only RST brought it back.
turnOn() re-ran the whole display.init(), which re-enters SPI setup, spends
~500 ms in Adafruit's reset delays and pulses GPIO 21 - the line shared with
TP_RST, so it reset the touch controller on every wake. Since turnOff() no
longer parks that line low, the panel stays configured while dark and waking
is just the backlight. Toggling also clears the refresh deadline so the
current frame is drawn immediately instead of the stale one.

Power-off rebooted instead of staying off. powerOff() went through
enterDeepSleep(), which always arms an ext1 wake on P_LORA_DIO_1; a deep-sleep
wake is a full reboot, so a node in live traffic restarted within seconds of
showing "Turning OFF". It now disables every wake source, so the node stays
down until RST or a power cycle.

Note that the display off/on cycle had never been exercised on this board
before: observer builds pinned AUTO_OFF_MILLIS=0, so the panel never blanked
until display.timeout made it a runtime setting.
2026-08-28 14:26:52 -07:00
agessaman 5d56267176 feat(display): add R8 observer TFT dashboard, touch toggle and display.timeout
Replace the sparse Heltec V4 R8 observer home screen with a padded dark
analytics dashboard, add manual display control, and make blanking a runtime
setting.

Dashboard (DISPLAY_ACTIVITY_DASHBOARD, the four R8 TFT observer envs):

- RadioActivityWindow: 20 one-minute buckets of valid RX packets, no heap.
  The caller's 32-bit millis() is extended to a monotonic 64-bit clock, so
  nothing downstream has a rollover case; an always-on node passes 2^32 ms
  after ~49.7 days, which would otherwise re-enter warm-up and divide 20
  minutes of traffic by seconds. Rates use 19 whole minutes plus the elapsed
  part of the current one rather than a fixed 1200 s.
- ObserverDashboard: header, radio strip, headline totals, a 20-bar
  packets-per-minute graph and RF/status footers, with separate portrait and
  landscape layouts. A text row is a fixed 16 px, which is 3.2 logical units
  in portrait but 4.27 in landscape, so one shared grid would overlap.
  Text is trimmed by character budget, not measured width: getTextWidth()
  reports an over-long string at the portrait driver's fallback scale, so
  DisplayDriver::drawTextEllipsized() under-trims and the row renders at half
  height.
- Six per-row signatures computed from what is actually drawn, so only the
  rows whose pixels changed repaint. No startFrame(), no whole-screen clear.
  Link state moved out of the full-frame signature, so a DHCP renewal or WiFi
  flap repaints one footer row instead of the panel.
- Dark theme by retuning the UIColor statics at runtime, which needs no
  display-driver edit and carries boot, setup, reboot and power-off with it.

Touch and button (DISPLAY_TOUCH_TOGGLE):

- CHSC6X at I2C 0x2E, polled; TP_INT is unusable (optional R13, and GPIO 43
  is U0TXD). The point-count byte is tested against a valid count, never
  against non-zero: an idle read returns 0xFF, which reads as a finger held
  down forever and latches the tap detector after one event.
- turnOff() no longer parks PIN_TFT_RST low on this board. GPIO 21 is a
  shared LCD_RST/TP_RST net, so doing that held the touch controller in
  reset for as long as the display was off. Verified against Heltec's
  expansion-board and mainboard schematics and the V4-R8 datasheet pinout,
  which also correct the pin comment in HeltecV4R8Board.cpp.
- The USER button click now toggles the display too; it previously did
  nothing whenever the display was already on.

display.timeout:

- `set display.timeout <secs>` / `get display.timeout`, 0 = stay on, 60 s
  default, 3600 max. Read live, so a change applies without a reboot and
  restarts the countdown rather than firing on the old deadline.
- Stored in MQTTPrefs (/mqtt.json), keeping NodePrefs aligned with upstream.
  Runtime-only: LegacyV1MQTTPrefs and the four frozen binary payload sizes
  are unchanged. No JSON format-version bump - the loader skips keys no
  def() claims, so older firmware reads newer files and this firmware reads
  older ones with the default applied. Both directions are covered by tests.
- Joins the observer atomic-setter contract, so a failed save rolls the live
  value back instead of only claiming to.

New periodic work uses a wrap-safe deadline check; `millis() >= deadline`
fires every loop for a whole interval before each rollover.

Adds test_radio_activity_window, test_observer_dashboard (driving the real
renderer against a recording DisplayDriver in both orientation profiles) and
test_touch_tap_detector. 440 native cases pass.
2026-08-28 13:39:16 -07:00
agessaman 0d2c926a07 feat(display): add R8 portrait observer layouts 2026-08-28 09:21:38 -07:00
mikecarper c6476b8ba8 feat: consolidate full companion runtime profiles 2026-08-28 08:47:26 -07:00
agessaman c0a7cf7930 fix(boards): update Heltec V4 R8 TFT LEDA control to active HIGH 2026-08-28 07:44:16 -07:00
mikecarper 91870e4bb0 fix: harden firmware builds and runtime reliability 2026-08-26 15:42:12 -07:00
mikecarper dc92ee61ef Expand and harden full companion profiles 2026-08-24 01:57:38 -07:00
agessaman 910e6ab03d fix(boards): initialize Heltec V4 R8 TFT 2026-08-23 16:34:27 -07:00
agessaman 104143bba6 fix(boards): reset Heltec V4 R8 TFT on GPIO 21
GPIO 21 is the Expansion Kit V2 panel reset, not touch reset.
Leaving RST unwired left the ST7789 blank after a bogus touch pulse.
2026-08-23 15:42:52 -07:00
agessaman 82074edfb3 Add Heltec V4 R8 FEM LNA controls 2026-08-20 21:48:47 -07:00
Adam Gessaman 648f5f1976 feat(mqtt): add Heltec V4 R8 configurations for MQTT observer and room server 2026-08-20 20:50:22 -07:00
mikecarper 671dd30769 Expand companion offline queues 2026-08-19 17:32:05 -07:00
mikecarper f0fe67df30 Merge remote-tracking branch 'review/PowerSaving-v16' into keymindCascade
# Conflicts:
#	build-iotthinks.sh
#	examples/simple_repeater/MyMesh.cpp
#	examples/simple_room_server/MyMesh.cpp
#	examples/simple_sensor/SensorMesh.cpp
#	src/helpers/CommonCLI.cpp
#	src/helpers/radiolib/CustomSX1262.h
#	src/helpers/sensors/EnvironmentSensorManager.cpp
#	variants/heltec_v4/platformio.ini
#	variants/heltec_v4_r8/HeltecV4R8Board.cpp
#	variants/heltec_v4_r8/HeltecV4R8Board.h
#	variants/heltec_v4_r8/platformio.ini
2026-08-14 08:22:26 -07:00
Kevin Le 5859319cbf Added Heltec V4 R8 2026-08-09 23:30:56 +07:00
mikecarper 61cb8d6e96 Merge upstream dev into keymindCascade
# Conflicts:
#	docs/payloads.md
#	examples/companion_radio/DataStore.cpp
#	examples/companion_radio/DataStore.h
#	examples/companion_radio/MyMesh.cpp
#	examples/companion_radio/MyMesh.h
#	examples/companion_radio/NodePrefs.h
#	examples/companion_radio/main.cpp
#	examples/simple_room_server/MyMesh.cpp
#	examples/simple_room_server/MyMesh.h
#	examples/simple_sensor/SensorMesh.cpp
#	platformio.ini
#	src/Utils.cpp
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	src/helpers/NRF52Board.cpp
#	src/helpers/nrf52/SerialEthernetInterface.cpp
#	src/helpers/radiolib/CustomLLCC68.h
#	src/helpers/radiolib/CustomLLCC68Wrapper.h
#	src/helpers/radiolib/CustomLR1110.h
#	src/helpers/radiolib/CustomSTM32WLxWrapper.h
#	src/helpers/radiolib/CustomSX1262.h
#	src/helpers/radiolib/CustomSX1268.h
#	src/helpers/radiolib/CustomSX1268Wrapper.h
#	src/helpers/ui/ST7735Display.cpp
#	test/mocks/Stream.h
#	variants/minewsemi_me25ls01/target.h
#	variants/wio-tracker-l1/platformio.ini
2026-08-03 14:53:59 -07:00
liamcottle e7f2c71701 usb companion firmwares now require build flag to include usb interface 2026-07-28 03:45:02 +12:00
mikecarper ccce0c8d75 feat: prepare v1.16.07 firmware release 2026-07-18 14:53:56 -07:00
Quency-D e5a3839d64 Optimize ADC readout 2026-05-27 15:12:59 +08:00
Quency-D 1ac5f359ca Added touch reset 2026-05-16 10:59:02 +08:00
Quency-D c183050935 Add heltec -v4-r8 board 2026-05-15 16:53:18 +08:00