fix(boards): initialize Heltec V4 R8 TFT

src/helpers/ui/ST7789LCDDisplay.cpp

@@ -4,10 +4,6 @@
   #define PIN_TFT_MISO -1
 #endif
 
-#ifndef PIN_TFT_LEDA_CTL_ACTIVE
-  #define PIN_TFT_LEDA_CTL_ACTIVE HIGH
-#endif
-
 #ifndef DISPLAY_ROTATION
   #define DISPLAY_ROTATION 3
 #endif
@@ -42,12 +38,18 @@ bool ST7789LCDDisplay::begin() {
   if (!_isOn) {
     if (_peripher_power) {
       _peripher_power->claim();
+    #ifdef HELTEC_V4_R8_TFT
       delay(100);
+    #endif
     }
 
     if (PIN_TFT_LEDA_CTL != -1) {
       pinMode(PIN_TFT_LEDA_CTL, OUTPUT);
+    #ifdef HELTEC_V4_R8_TFT
       digitalWrite(PIN_TFT_LEDA_CTL, !PIN_TFT_LEDA_CTL_ACTIVE);
+    #else
+      digitalWrite(PIN_TFT_LEDA_CTL, HIGH);
+    #endif
     }
 
     // Im not sure if this is just a t-deck problem or not, if your display is slow try this.
@@ -65,9 +67,11 @@ bool ST7789LCDDisplay::begin() {
     display.setTextSize(2 * DISPLAY_SCALE_X);
     display.cp437(true); // Use full 256 char 'Code Page 437' font
 
+  #ifdef HELTEC_V4_R8_TFT
     if (PIN_TFT_LEDA_CTL != -1) {
       digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE);
     }
+  #endif
 
     _isOn = true;
   }
@@ -82,11 +86,20 @@ void ST7789LCDDisplay::turnOn() {
 void ST7789LCDDisplay::turnOff() {
   if (_isOn) {
     if (PIN_TFT_LEDA_CTL != -1) {
+    #ifdef HELTEC_V4_R8_TFT
       digitalWrite(PIN_TFT_LEDA_CTL, !PIN_TFT_LEDA_CTL_ACTIVE);
+    #else
+      digitalWrite(PIN_TFT_LEDA_CTL, HIGH);
+    #endif
     }
     if (PIN_TFT_RST != -1) {
       digitalWrite(PIN_TFT_RST, LOW);
     }
+  #ifndef HELTEC_V4_R8_TFT
+    if (PIN_TFT_LEDA_CTL != -1) {
+      digitalWrite(PIN_TFT_LEDA_CTL, LOW);
+    }
+  #endif
     _isOn = false;
 
     if (_peripher_power) _peripher_power->release();

variants/heltec_v4_r8/HeltecV4R8Board.cpp

@@ -1,5 +1,9 @@
 #include "HeltecV4R8Board.h"
 
+#if defined(HELTEC_V4_R8_TFT) && defined(DISPLAY_CLASS)
+  #include <target.h>
+#endif
+
 void HeltecV4R8Board::begin() {
   ESP32Board::begin();
 
@@ -8,8 +12,8 @@ void HeltecV4R8Board::begin() {
 
   loRaFEMControl.init();
 
-  // Expansion Kit CHSC6X touch RST/INT are unwired. GPIO 21 is TFT RST
-  // (PIN_TFT_RST), owned by ST7789LCDDisplay. Do not pulse it here.
+  // GPIO 21 is shared by LCD_RST and TP_RST. Let ST7789LCDDisplay own the
+  // reset sequence; no separate touch reset is needed.
 #ifdef PIN_TOUCH_RST
   pinMode(PIN_TOUCH_RST, OUTPUT);
   digitalWrite(PIN_TOUCH_RST, HIGH);
@@ -42,6 +46,10 @@ void HeltecV4R8Board::onAfterTransmit(void) {
 }
 
 void HeltecV4R8Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
+#if defined(HELTEC_V4_R8_TFT) && defined(DISPLAY_CLASS)
+  display.turnOff();
+#endif
+
   esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
 
   rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);

variants/heltec_v4_r8/platformio.ini

@@ -68,7 +68,7 @@ build_flags =
   -D PIN_TFT_RST=21
   -D PIN_TFT_VDD_CTL=-1
   -D PIN_TFT_LEDA_CTL=44
-  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
+  -D PIN_TFT_LEDA_CTL_ACTIVE=LOW
   -D PIN_TFT_CS=47
   -D PIN_TFT_DC=48
   -D PIN_TFT_SCL=16