Add acknowledged SetFs and packet-cache shortcuts for SX1262, extend the LR1110 FS-mode fast path with buffered SPI, and keep the expander-backed Indicator on its previous path. Include HIL fixtures, validation notes, and regression tests.
The FEM commands moved out of CommonCLI into Board::handleCommand(), and
the T-Beam 1W fan control was added there too, but the portal never caught
up: `radio.fem.txgain` and the fan commands were missing from the terminal
table entirely, while `radio.fem.rxgain` was offered on every board even
though a board with no hook now answers "??:" rather than "unsupported".
Whether a node answers these is a property of the board, not of the build,
so the page cannot know from the firmware version. Ask the board instead:
probeBoardCommands() runs each candidate getter once on the loop task at
startup and keeps the ones that answer, which needs no per-variant list
because Board::handleCommand() already reports whether it handled a
command. /api/status names the survivors and the page hides everything
else, so adding a command to a variant means one entry in WC_BOARD_CMDS
rather than an edit per board.
The two FEM keys also become Radio-panel toggles, gated the same way;
their `set` reaches the board hook through the existing config batch, so
only the allowlist and /api/config needed to grow.
webconfig_cli_audit.py now scans variants/*/*Board.cpp for the boards that
actually build the portal, checks set-only keys in the reverse direction,
and verifies every gate is a command some board answers; the mock gained
--board-cmds so both shapes of board are testable. `stop ota` joins
NOT_OFFERED: `start ota` cannot run from the portal, so it has nothing to
stop.
Two defects found by an adversarial review of the merge.
A link transition no longer stops a slot whose connect attempt is in flight.
Stopping one means esp_mqtt_client_stop(), which waits on the SDK's API mutex
and its task's stopped event with no bound; the client task notices only when
it returns from whatever transport call it is in. During teardown the bridge's
StopUnproven timeout contains that, but during a transition nothing does, so a
routine WiFi flap could freeze the sole MQTT worker for far longer than the 2 s
this path advertises, with the bridge's own stop handshake queued behind it.
The attempt is left to resolve instead: unlike a reconfigure, a transition
changes neither endpoint nor credentials, so an attempt that completes is
credited to the broker it actually reached and drops with the old route.
Failing back to Ethernet left the node using the WiFi network's DNS server.
lwIP keeps one global server list and IDF 4.4 has no per-interface retention,
so the medium that leased last owns DNS for every socket. Each link now
remembers the resolver its own DHCP lease installed and puts it back when it is
selected again; a medium that never held a lease leaves the current resolver
alone. Where the two networks are on different subnets this was a silent
outage: the link read as connected while every broker and NTP hostname failed
to resolve, until Ethernet's own DHCP renewal happened to fix it.
#54 lands first, so the network abstraction is reworked on top of the
per-slot client ownership model instead of alongside it.
Two resolutions are semantic, not textual:
- Link-transition teardown goes through the ownership API. It called
softDisconnect() on every started client, which bypassed client_state and
ignored the typed result. A slot that is still Starting now gets a real
stop: softDisconnect() returns immediately on a client that is not yet
connected, so its attempt would otherwise complete against the old route and
deliver a CONNECTED event indistinguishable from the new one's (F04). On a
medium switch the old route can still be briefly usable, so that is not
hypothetical. A connected client keeps the cheap bounded path, and a
quarantined one is left alone.
- NetworkLink::applyPowerPrefs() adopts WifiPowerSavePolicy. Its local
`2 ? MAX : NONE` mapping would have reintroduced F11 and read the new stored
value 3 (explicit `min`) as none. It also applies the setting when the link
starts already associated, which is the case the bridge used to cover.
The NTP probe from #54 keeps its validation and its one-attempt-per-server
bound, but resolves and gates on the selected link rather than on WiFi, so it
works on an Ethernet-preferred node.
Stored 0 was the shipped default from 2026-01-02 to 2026-03-28, and every
association path has run it with power save off since. Reading it as
MIN_MODEM, as F11 did, would have put every node set up in that window
into modem sleep on its next association. 0 now reads as `none`, and
`set wifi.powersave min` stores a new value 3. /mqtt.json accepts 0..3;
older firmware repairs 3 to `none` on load. Binary snapshots are no longer
written, so 3 never reaches a legacy layout.
- Link down/switch edges now softDisconnect() every started slot instead
of disconnect(). The full stop could wait forever for a DISCONNECTED
event on the Core 0 MQTT task, and it destroyed and recreated every
slot's esp-mqtt task on each Wi-Fi drop, where the bridge previously
stopped none (measured: 62 s deauth, five slots, zero stops).
softDisconnect() is bounded and keeps the task; reconnectSlotClient()
then calls reconnect() on the new route. Rename the transition action
to disconnect_started_slots to match.
- Ethernet no-IP recovery and init retries rebuild the CH390 netif, so
they now run inside the route-switch mutation gate. An OTA/WebConfig
lock taken after maintain() samples the lock count can no longer have
the interface torn down underneath it.
- Guard the boot-time link bootstrap to observer ESP32 builds. It ran
unconditionally in MyMesh::begin(), breaking every non-observer
repeater/room server build (ESP32 and nRF52).
- Rename NetworkInterface -> NetworkLink (class, accessor, files).
Arduino-ESP32 3.x ships its own NetworkInterface class and header,
which broke the ESP32-C6 builds. Drop WiFi.setAutoConnect(), a no-op
on 2.x and removed in 3.x.
- Refresh stored Wi-Fi credentials every bridge tick so the STA
reconnect loop picks up `set wifi.ssid` / `set wifi.pwd` without a
reboot, as the bridge did before the link moved out of it. Skip
reconnects while the SSID is empty.
- Restore the "WiFi connected: <ip>" / "WiFi disconnected: reason N"
debug lines the bridge used to print.
- Alert on Ethernet only once it has held a lease this boot or when no
Wi-Fi is configured; Wi-Fi-only installs of an Ethernet-preferred
image keep Wi-Fi alerts instead of reporting "Ethernet down".
- Record wifi.setup_complete only for Ethernet LAN onboarding, so
Wi-Fi builds keep the SSID-based first-boot portal rule.
- Use seq_cst for the route-switch lock/mutation flag handshake.
- Docs: SNMP RSSI sentinel is -127; describe link-return vs medium-switch
reconnect behavior accurately; note runtime credential pickup.
- Test: unknown keys inside a known /mqtt.json group are ignored, which
keeps wifi.setup_complete downgrade-safe.