Commit Graph
761 Commits
Author SHA1 Message Date
mikecarper 0496affcf8 Keep Indicator setup text large on fallback canvas 2026-08-31 16:36:46 -07:00
mikecarper 4bbdf4b071 Enlarge Indicator native setup screen 2026-08-31 16:10:03 -07:00
mikecarper 164a6e8227 Fix Indicator transport taps and fresh LoRa defaults 2026-08-31 15:56:54 -07:00
mikecarper 2e026caf4a Improve Indicator transport touch UI 2026-08-31 15:11:11 -07:00
mikecarper 5af7b73ff9 Add safe ESP32 transports and Indicator UI
Reserve board-specific GPIOs, make ESP-NOW channel/format handling configurable, and coordinate WiFi, BLE, NTP, MQTT, and host actions safely.

Add the Indicator message page, exclusive transport selector, dynamic 480/320 rendering, larger transport typography, pairing cleanup, and corresponding tests and documentation.
2026-08-31 14:29:42 -07:00
mikecarper 2a82472853 Remove redundant MQTT picker mode 2026-08-31 13:24:52 -07:00
mikecarper a61ef06d3e Show narrowed firmware picker candidates 2026-08-31 13:11:03 -07:00
mikecarper 8920c35da5 Harden marathon-tested OTA and hardware paths
Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
2026-08-30 19:26:15 -07:00
mikecarper f873e51b43 Fix ESP32 Full Companion partition policy 2026-08-29 20:26:27 -07:00
mikecarper fdf528bb27 Fix Full Companion terminal diagnostics 2026-08-29 16:57:44 -07:00
mikecarper 256eb26b17 fix: reserve Indicator heap for BLE and WiFi 2026-08-29 16:13:47 -07:00
mikecarper e7962f9598 Fix release matrix gaps and add background builds 2026-08-29 14:55:07 -07:00
mikecarper 662a060c57 Use RC32 OTA partition capacity 2026-08-29 10:44:23 -07:00
mikecarper 83266757ca Avoid USB logging enum macro collision 2026-08-29 09:47:24 -07:00
mikecarper 541980a82f fix: harden LoRa OTA chain and storage 2026-08-29 06:58:48 -07:00
mikecarper 11e70a5b32 fix: stabilize primary ESP-NOW WiFi coexistence 2026-08-28 21:01:17 -07:00
mikecarper fefd1a9577 Fix nRF52 OTA compatibility with legacy bootloaders 2026-08-28 20:10:28 -07:00
Adam Gessaman da6bab3e83 Merge upstream/dev into observer-firmware-dev 2026-08-28 19:45:59 -07:00
mikecarper da61c48e7b feat: integrate R8 observer and companion updates 2026-08-28 18:39:26 -07:00
mikecarper c24bc82814 Merge upstream dev companion CLI updates 2026-08-28 17:31:28 -07:00
mikecarper 70a129a5bd fix: reserve controls and expose ESP-NOW channel 2026-08-28 16:55:40 -07:00
mikecarper 2b3b93ab2f fix: harden ESP-NOW and full companion networking
Add selectable shared ESP-NOW channels, raw/wrapped bridge compatibility, and bounded fragmentation for maximum-size packets.\n\nGive ESP32 Full profiles WiFi coexistence, stabilize WebConfig and USB terminal lifecycles, and keep disabled bridges stopped during observer updates.\n\nUpdate generated UI, firmware selection, documentation, and regression coverage.
2026-08-28 16:36:34 -07:00
agessaman 970ae395a8 fix(display): harden CHSC6X polling and long-gap activity accounting
Addresses a Codex review of the preceding three commits.

Touch could disable itself for the whole session. begin() latched _present
from a single address probe, but this controller NACKs whenever it has nothing
to report, so an idle probe at boot was indistinguishable from absent
hardware. The probe is now diagnostics only; checkTap() polls regardless, and
a NACK costs one quiet bus cycle.

Touch no longer mutates shared bus state. Wrapping the read in
setTimeOut()/restore was an unsynchronised global write, and the MQTT task
drives the same Wire through AutoDiscoverRTCClock in its NTP fallback, so it
could inherit the short timeout. The address probe alone removes the
ESP_ERR_TIMEOUT stalls that motivated it, and it also ran before the timeout
was installed, so the transaction most exposed to a wedged bus was unprotected
anyway.

A single failed read could fake a release. The debounce window was 40 ms
against a 50 ms poll, so a state change was confirmed by the very next sample
and one NACK mid-touch produced a release followed by a second tap. It is now
80 ms - two consecutive consistent reads.

RadioActivityWindow froze after a gap longer than ~24.8 days. tick() treated
any delta past the signed halfway mark as an out-of-order timestamp, so a node
left unserviced that long kept a month-old packet in the 20-minute window and
reported it as recently received. A backwards step is now only believed when
it is small, which is what an out-of-order reading between two call sites
actually looks like.

Not changed: a downgrade that then saves prefs drops the display group, since
/mqtt.json is rewritten from the older serializer's known schema. That is
inherent to every appended field in this format, and bumping the JSON version
would be worse - older firmware would reject the file rather than ignore one
group. Documented instead.
2026-08-28 14:55:44 -07:00
agessaman ca17c2980c feat(display): add runtime display.flip for panel orientation
`set display.flip 0|1` (also off/on) turns the panel 180 degrees from its
compiled DISPLAY_ROTATION, persisted in MQTTPrefs alongside display.timeout
and applied live without a reboot.

Adding 2 to the compiled rotation rather than setting an absolute value keeps
portrait portrait and landscape landscape, so the DisplayViewport geometry
never changes with it and the setting cannot produce a nonsensical mix.
DisplayDriver gains a defaulted no-op setFlipped(), so no other display
driver is affected.

The compiled rotation was verified identical across `pio run` and `build.sh`
on two machines (movi a11, 2 at the setRotation call site), yet the panel read
upside down for one tester and upright for another - which is what a board
mounted either way up looks like. No single compiled constant satisfies both,
so orientation becomes a setting rather than another rebuild.

Runtime-only, like display_timeout_secs: LegacyV1MQTTPrefs and the frozen
binary payload sizes are untouched, and the JSON group is an append that older
firmware skips.
2026-08-28 14:37:03 -07:00
agessaman 5d56267176 feat(display): add R8 observer TFT dashboard, touch toggle and display.timeout
Replace the sparse Heltec V4 R8 observer home screen with a padded dark
analytics dashboard, add manual display control, and make blanking a runtime
setting.

Dashboard (DISPLAY_ACTIVITY_DASHBOARD, the four R8 TFT observer envs):

- RadioActivityWindow: 20 one-minute buckets of valid RX packets, no heap.
  The caller's 32-bit millis() is extended to a monotonic 64-bit clock, so
  nothing downstream has a rollover case; an always-on node passes 2^32 ms
  after ~49.7 days, which would otherwise re-enter warm-up and divide 20
  minutes of traffic by seconds. Rates use 19 whole minutes plus the elapsed
  part of the current one rather than a fixed 1200 s.
- ObserverDashboard: header, radio strip, headline totals, a 20-bar
  packets-per-minute graph and RF/status footers, with separate portrait and
  landscape layouts. A text row is a fixed 16 px, which is 3.2 logical units
  in portrait but 4.27 in landscape, so one shared grid would overlap.
  Text is trimmed by character budget, not measured width: getTextWidth()
  reports an over-long string at the portrait driver's fallback scale, so
  DisplayDriver::drawTextEllipsized() under-trims and the row renders at half
  height.
- Six per-row signatures computed from what is actually drawn, so only the
  rows whose pixels changed repaint. No startFrame(), no whole-screen clear.
  Link state moved out of the full-frame signature, so a DHCP renewal or WiFi
  flap repaints one footer row instead of the panel.
- Dark theme by retuning the UIColor statics at runtime, which needs no
  display-driver edit and carries boot, setup, reboot and power-off with it.

Touch and button (DISPLAY_TOUCH_TOGGLE):

- CHSC6X at I2C 0x2E, polled; TP_INT is unusable (optional R13, and GPIO 43
  is U0TXD). The point-count byte is tested against a valid count, never
  against non-zero: an idle read returns 0xFF, which reads as a finger held
  down forever and latches the tap detector after one event.
- turnOff() no longer parks PIN_TFT_RST low on this board. GPIO 21 is a
  shared LCD_RST/TP_RST net, so doing that held the touch controller in
  reset for as long as the display was off. Verified against Heltec's
  expansion-board and mainboard schematics and the V4-R8 datasheet pinout,
  which also correct the pin comment in HeltecV4R8Board.cpp.
- The USER button click now toggles the display too; it previously did
  nothing whenever the display was already on.

display.timeout:

- `set display.timeout <secs>` / `get display.timeout`, 0 = stay on, 60 s
  default, 3600 max. Read live, so a change applies without a reboot and
  restarts the countdown rather than firing on the old deadline.
- Stored in MQTTPrefs (/mqtt.json), keeping NodePrefs aligned with upstream.
  Runtime-only: LegacyV1MQTTPrefs and the four frozen binary payload sizes
  are unchanged. No JSON format-version bump - the loader skips keys no
  def() claims, so older firmware reads newer files and this firmware reads
  older ones with the default applied. Both directions are covered by tests.
- Joins the observer atomic-setter contract, so a failed save rolls the live
  value back instead of only claiming to.

New periodic work uses a wrap-safe deadline check; `millis() >= deadline`
fires every loop for a whole interval before each rollover.

Adds test_radio_activity_window, test_observer_dashboard (driving the real
renderer against a recording DisplayDriver in both orientation profiles) and
test_touch_tap_detector. 440 native cases pass.
2026-08-28 13:39:16 -07:00
agessaman 0d2c926a07 feat(display): add R8 portrait observer layouts 2026-08-28 09:21:38 -07:00
mikecarper c6476b8ba8 feat: consolidate full companion runtime profiles 2026-08-28 08:47:26 -07:00
mikecarper a0165cb38b fix: harden CLI and GPS handling 2026-08-27 17:59:44 -07:00
mikecarper 5a26d4ddd1 fix: stabilize Heltec RC32 startup 2026-08-27 17:06:20 -07:00
mikecarper 7676e4b1c2 feat: unify companion builds and USB runtime modes 2026-08-27 15:06:26 -07:00
mikecarper e5fd77e53f feat: add Bluetooth-controlled LoRa OTA
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
2026-08-27 01:22:18 -07:00
mikecarper 91870e4bb0 fix: harden firmware builds and runtime reliability 2026-08-26 15:42:12 -07:00
mikecarper ce7e65314d fix: preserve board features in full companion profiles 2026-08-26 13:49:55 -07:00
mikecarper 83e402bd4d fix: preserve complete companion build profiles 2026-08-25 23:47:40 -07:00
mikecarper 9bc95a60fe fix: default advert location to stored preferences 2026-08-25 23:47:40 -07:00
mikecarper 131bbafc67 feat: retain multi-channel voltage telemetry 2026-08-25 22:51:22 -07:00
mikecarper ad1ff3f03e feat: order flood rules by channel specificity 2026-08-25 21:58:08 -07:00
mikecarper 605b245eb5 feat: add selective flood retry rules 2026-08-25 21:38:23 -07:00
mikecarper 65e40ff05f feat: add customizable companion Bluetooth names 2026-08-25 20:51:18 -07:00
mikecarper 42b6a0df60 feat: retain INA monitors in reduced RAK repeaters 2026-08-25 20:24:17 -07:00
mikecarper f01970058d feat: add capability-aware firmware build profiles 2026-08-25 20:07:09 -07:00
mikecarper 9d57a3a4f8 feat: complete Cascade Indicator companion support
Add native-resolution Indicator UI, touch navigation, SD-backed pixel and emoji fonts, LoRa radio support, dual-slot WiFi Companion provisioning, and mesh clock fallback. Harden radio recovery and build defaults, normalize ESP32 setup-AP protocols, and document/test the operator workflows.
2026-08-25 18:37:17 -07:00
mikecarper 1792acda6a Harden external radio recovery and power limits 2026-08-25 10:27:26 -07:00
mikecarper 8b7c5fafb4 Validate companion repeater status responses 2026-08-25 10:27:04 -07:00
mikecarper 7077283e95 Make RXPS preamble adaptive for fast radio settings 2026-08-24 20:42:54 -07:00
mikecarper da74d7de22 Qualify optional 64-symbol fast preamble 2026-08-24 16:54:35 -07:00
mikecarper ba70c5b3c6 Harden fast RXPS timing and board behavior 2026-08-24 15:10:54 -07:00
Scott Powell 8ccc9928a8 * DynamicConfigSerializer fixes, and unit tests 2026-08-24 19:42:55 +10:00
mikecarper dc92ee61ef Expand and harden full companion profiles 2026-08-24 01:57:38 -07:00
mikecarper f2d4ffbb7e Unify full firmware profiles and add dual USB logging 2026-08-23 19:22:45 -07:00