Record three-profile SolarXiao compatibility and build validation [skip ci]
This commit is contained in:
mikecarper committed
1 parent
c6f1300af8
commit
ad15f2ea08
4 files changed
+225
-2
No files matched your search
@@ -121,8 +121,7 @@ A remotely deployed node must first receive compatible firmware before these
|
||||
commands can be used. Deployment still requires its installed target and
|
||||
bootloader compatibility to be checked when it is reachable.
|
||||
|
||||
See the [automatic detection/Base build and host validation](test-results/solarxiao_auto_2026-10-21.md)
|
||||
and [earlier manual Advanced profile validation](test-results/solarxiao_advanced_2026-10-21.md).
|
||||
See the [three-profile build and host validation](test-results/solarxiao_basic_2026-10-21.md).
|
||||
This adds no measurements beyond existing self voltage/MCU temperature and has
|
||||
not been installed on the remote Advanced board.
|
||||
|
||||
|
||||
@@ -11,6 +11,7 @@ Completed validation reports, experiments, and test guides are collected here. O
|
||||
|
||||
## Radio and RF
|
||||
|
||||
- [SolarXiao three power profiles build/host validation, 2026-10-21](solarxiao_basic_2026-10-21.md)
|
||||
- [SolarXiao automatic detection and Base support build/host validation, 2026-10-21](solarxiao_auto_2026-10-21.md)
|
||||
- [SolarXiao Advanced carrier profile build/host validation, 2026-10-21](solarxiao_advanced_2026-10-21.md)
|
||||
- [SolarXiao native MPPT and battery controls, 2026-10-21](solarxiao_power_2026-10-21.md)
|
||||
|
||||
@@ -0,0 +1,66 @@
|
||||
# SolarXiao three power profiles, 2026-10-21
|
||||
|
||||
Base and Advanced share the same onboard power telemetry: XIAO battery voltage
|
||||
and MCU temperature. Their analog charger designs differ, but the published
|
||||
layouts expose no additional digital charger measurements or controls. The
|
||||
firmware now combines them into one Basic power profile without claiming which
|
||||
charger is fitted. Additional power measurements require added hardware/wiring.
|
||||
|
||||
There are three canonical choices:
|
||||
|
||||
- `auto`: verify INA260 to enable MPPT; otherwise self-only, retrying.
|
||||
- `basic`: Base/Advanced self readings with native power-chip access disabled.
|
||||
- `mppt`: manual MPPT override, retaining independent charger write checks.
|
||||
|
||||
Auto remains the default without a saved selection. Old `base` and `advanced`
|
||||
command values remain compatibility aliases for `basic`, not separate modes.
|
||||
Readbacks and help show only the three canonical choices. Existing Advanced
|
||||
record value 1 and Base value 3 both load as Basic without a startup write.
|
||||
New Basic/alias saves use value 1. MPPT and Auto retain values 0 and 2.
|
||||
|
||||
Radio target choice remains independent: select the existing 30S/33S target for
|
||||
the fitted E22 module. No RF settings, PA limits, OTA identities, bootloader,
|
||||
flash layout, battery protection or automatic detection behavior changed.
|
||||
|
||||
## Qualified source and packages
|
||||
|
||||
Application source:
|
||||
[`aa91fffae41465ba932f069f2a45e2a3ae1c7ad4`](https://github.com/mikecarper/MeshCore/commit/aa91fffae41465ba932f069f2a45e2a3ae1c7ad4).
|
||||
Version: `v1.18.0.1-halo-keymind-cascade-dev-aa91fffa`.
|
||||
|
||||
| Target | Profile | Application bytes | EndF body hash |
|
||||
| --- | --- | --- | --- |
|
||||
| `solarxiao_33S_repeater` | Full | 598,824 | `37EE3060D73CAB2E` |
|
||||
| `solarxiao_33S_repeater` | Reduced | 568,828 | `2174A0D9CB1EA7B9` |
|
||||
| `solarxiao_30S_repeater` | Full | 598,824 | `3525D6629B234891` |
|
||||
| `solarxiao_30S_repeater` | Reduced | 568,828 | `8037A8127A7D324A` |
|
||||
|
||||
All four DFU/UF2 builds passed linked capability, packaging and runtime memory
|
||||
checks. Full has 150,576 internal bytes available; Reduced has 152,224, against
|
||||
76,960 required. Independent package checks verified version, EndF body length,
|
||||
body hash, unchanged target/hardware IDs, artifact hashes and linked Basic
|
||||
capabilities. Every application contains the three-option help and omits the
|
||||
old four-option help. PlatformIO ran one process at a time.
|
||||
|
||||
## Host acceptance and scope
|
||||
|
||||
All 28 checks passed: 19 carrier methods, 3 existing power methods and 6 XIAO
|
||||
startup/battery safety checks. Native harnesses use ASan/UBSan. Compatibility
|
||||
tests cover every old record value 0..3, both aliases, canonical Basic saves,
|
||||
identical actual-adapter gating and no startup rewrite. Every out-of-range
|
||||
record value 4..255 fails closed with no native bus access.
|
||||
|
||||
The actual adapter retains live self readings in Basic mode while native
|
||||
commands, periodic access, telemetry and voltage-history calls make no native
|
||||
bus calls. Existing detection/retry, timer-wrap/long-uptime replay, persistence
|
||||
fault, identity, permission, parser-boundary, canary and history checks pass.
|
||||
|
||||
These are host/build results only. No device was flashed and no physical Auto,
|
||||
radio, charger, boot/soak or LoRa OTA test was performed for this image. SEA
|
||||
Sherwood remains unreachable and unchanged. Earlier hardware reports apply
|
||||
only to their named firmware revisions.
|
||||
|
||||
See the [validation record](solarxiao_basic_2026-10-21.safe.json) for package
|
||||
hashes and the [controls guide](../solarxiao_power.md) for hardware sources and
|
||||
commands. Packages and logs are retained under
|
||||
`/home/mesh/hwtest/solarxiao-basic-20261021/`.
|
||||
@@ -0,0 +1,157 @@
|
||||
{
|
||||
"passed": true,
|
||||
"scope": "build and host validation only; no hardware deployment or new physical measurements",
|
||||
"source_commit": "aa91fffae41465ba932f069f2a45e2a3ae1c7ad4",
|
||||
"version": "v1.18.0.1-halo-keymind-cascade-dev-aa91fffa",
|
||||
"canonical_modes": [
|
||||
"auto",
|
||||
"basic",
|
||||
"mppt"
|
||||
],
|
||||
"default_mode": "auto when no saved selection exists",
|
||||
"basic_hardware": "Base and Advanced share existing XIAO battery voltage and MCU temperature; no digital onboard charger interface",
|
||||
"compatibility": {
|
||||
"legacy_base_alias": "basic",
|
||||
"legacy_advanced_alias": "basic",
|
||||
"stored_values": {
|
||||
"0": "mppt",
|
||||
"1": "basic (legacy Advanced)",
|
||||
"2": "auto",
|
||||
"3": "basic (legacy Base)"
|
||||
},
|
||||
"basic_write_value": 1,
|
||||
"startup_migration_writes": false,
|
||||
"other_record_values": "4..255 fail closed"
|
||||
},
|
||||
"automatic_detection_changed": false,
|
||||
"rf_and_ota_identities_changed": false,
|
||||
"installed_on_any_device": false,
|
||||
"new_physical_measurements": [],
|
||||
"tests": {
|
||||
"carrier": 19,
|
||||
"existing_native_power": 3,
|
||||
"xiao_battery_safety": 6,
|
||||
"total": 28,
|
||||
"native_sanitizers": [
|
||||
"ASan",
|
||||
"UBSan"
|
||||
],
|
||||
"native-tests.log_sha256": "5abf6b2b2665575c1ae54c1816edf29d20c6e1a41c343e03a8a61831c37e4c3e",
|
||||
"xiao-startup-tests.log_sha256": "cdf94fd55b36bcd5a79b86f1d200a2b0c5f6933e3b8c293d6161f6910ee4ab95"
|
||||
},
|
||||
"platformio_concurrency": 1,
|
||||
"builds": {
|
||||
"solarxiao_33S_repeater": {
|
||||
"full": {
|
||||
"package": "solarxiao_33S_repeater-full-ota-v1.18.0.1-halo-keymind-cascade-dev-aa91fffa.zip",
|
||||
"package_sha256": "ada220a19cc2999ddc90cc1a41735540b31672f9a890c68586fa35dd6c411431",
|
||||
"application_bytes": 598824,
|
||||
"application_sha256": "eec6006c4f7c920e327be7db56397c03dbe41ccc28ec6ca0b17e218efbb57529",
|
||||
"body_bytes": 598768,
|
||||
"body_hash": "37EE3060D73CAB2E",
|
||||
"ota_target": "0x3caf966e",
|
||||
"hardware_id": "solarxiao_33S",
|
||||
"firmware_markers": {
|
||||
"native_power": true,
|
||||
"auto_verified_identity": true,
|
||||
"three_canonical_options": true,
|
||||
"common_basic_capabilities": true,
|
||||
"live_self_readings": true,
|
||||
"history_guidance": true
|
||||
},
|
||||
"memory_passed": true,
|
||||
"available_internal_bytes": 150576,
|
||||
"required_heap_bytes": 76960,
|
||||
"capabilities_verified": true,
|
||||
"update_methods": [
|
||||
"bluetooth",
|
||||
"lora"
|
||||
],
|
||||
"uf2_sha256": "11fde81f1428243d7753f8caecb72e6f309b0a0d1312c7193d7084df260b41a5"
|
||||
},
|
||||
"reduced": {
|
||||
"package": "solarxiao_33S_repeater-reduced-ota-v1.18.0.1-halo-keymind-cascade-dev-aa91fffa.zip",
|
||||
"package_sha256": "8e0859c8fb785203f1b618340f61f27928fa3632c4e88e8dc0b135c98ce48321",
|
||||
"application_bytes": 568828,
|
||||
"application_sha256": "cf96d6231a4f2d477cb8e8f2adf4bd85181bc37ebf569c0f8a1b60d1051204e3",
|
||||
"body_bytes": 568772,
|
||||
"body_hash": "2174A0D9CB1EA7B9",
|
||||
"ota_target": "0x3caf966e",
|
||||
"hardware_id": "solarxiao_33S",
|
||||
"firmware_markers": {
|
||||
"native_power": true,
|
||||
"auto_verified_identity": true,
|
||||
"three_canonical_options": true,
|
||||
"common_basic_capabilities": true,
|
||||
"live_self_readings": true,
|
||||
"history_guidance": true
|
||||
},
|
||||
"memory_passed": true,
|
||||
"available_internal_bytes": 152224,
|
||||
"required_heap_bytes": 76960,
|
||||
"capabilities_verified": true,
|
||||
"update_methods": [
|
||||
"bluetooth",
|
||||
"lora"
|
||||
],
|
||||
"uf2_sha256": "7e4a90de5d950b5db5cc956ac3ee4226e9aeb5dfeb3dd06b8bc6985b6eddcedb"
|
||||
}
|
||||
},
|
||||
"solarxiao_30S_repeater": {
|
||||
"full": {
|
||||
"package": "solarxiao_30S_repeater-full-ota-v1.18.0.1-halo-keymind-cascade-dev-aa91fffa.zip",
|
||||
"package_sha256": "beed4c6c5e42437d8a430c03f4a648d50fc16e250a5eaece8a2c6eefaa6f5cd3",
|
||||
"application_bytes": 598824,
|
||||
"application_sha256": "d1546cd1fd2efdb919091807930370bde13ec731fb20f57137718ef1556b56f0",
|
||||
"body_bytes": 598768,
|
||||
"body_hash": "3525D6629B234891",
|
||||
"ota_target": "0xb38ebf22",
|
||||
"hardware_id": "solarxiao_30S",
|
||||
"firmware_markers": {
|
||||
"native_power": true,
|
||||
"auto_verified_identity": true,
|
||||
"three_canonical_options": true,
|
||||
"common_basic_capabilities": true,
|
||||
"live_self_readings": true,
|
||||
"history_guidance": true
|
||||
},
|
||||
"memory_passed": true,
|
||||
"available_internal_bytes": 150576,
|
||||
"required_heap_bytes": 76960,
|
||||
"capabilities_verified": true,
|
||||
"update_methods": [
|
||||
"bluetooth",
|
||||
"lora"
|
||||
],
|
||||
"uf2_sha256": "6361cbf15dd789b9c8beff61c0ca011ed716263877fc5169889957a2fefd979c"
|
||||
},
|
||||
"reduced": {
|
||||
"package": "solarxiao_30S_repeater-reduced-ota-v1.18.0.1-halo-keymind-cascade-dev-aa91fffa.zip",
|
||||
"package_sha256": "dfecb300f88c8304468aa5930e3b45c1a632ede974fc3276bc12cfae8c343549",
|
||||
"application_bytes": 568828,
|
||||
"application_sha256": "f5cf0c3f34dfec07519d63c51b23b3995dc5b3f187a254a85f6fcf4113d2c7ae",
|
||||
"body_bytes": 568772,
|
||||
"body_hash": "8037A8127A7D324A",
|
||||
"ota_target": "0xb38ebf22",
|
||||
"hardware_id": "solarxiao_30S",
|
||||
"firmware_markers": {
|
||||
"native_power": true,
|
||||
"auto_verified_identity": true,
|
||||
"three_canonical_options": true,
|
||||
"common_basic_capabilities": true,
|
||||
"live_self_readings": true,
|
||||
"history_guidance": true
|
||||
},
|
||||
"memory_passed": true,
|
||||
"available_internal_bytes": 152224,
|
||||
"required_heap_bytes": 76960,
|
||||
"capabilities_verified": true,
|
||||
"update_methods": [
|
||||
"bluetooth",
|
||||
"lora"
|
||||
],
|
||||
"uf2_sha256": "9ddd3ad99bd5e5ad84794727db587ba39dc55ce985003125a266e3bad5e4658b"
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Reference in new issue
Block a user