Update MQTT_IMPLEMENTATION.md to include WiFi power save mode configuration details. Add commands for retrieving and setting power save modes (none, min, max) with descriptions for each option.

This commit is contained in:
agessaman committed 2026-01-02 13:36:41 -08:00
1 parent 8fa99611cb
commit 915f8b8e52
1 file changed
+15
+15
View File
@@ -126,6 +126,7 @@ The MQTT bridge comes with the following defaults:
- **Default Broker**: meshtastic.pugetmesh.org:1883 (username: meshdev, password: large4cats)
- **WiFi SSID**: "ssid_here" (must be configured)
- **WiFi Password**: "password_here" (must be configured)
- **WiFi Power Save**: "min" (minimum power saving, balanced performance and power)
- **Timezone**: "America/Los_Angeles" (Pacific Time with DST support)
- **Timezone Offset**: -8 hours (fallback)
- **Let's Mesh Analyzer US**: Enabled (mqtt-us-v1.letsmesh.net:443)
@@ -170,10 +171,15 @@ The MQTT bridge comes with the following defaults:
#### Get Commands
- `get wifi.ssid` - Get WiFi SSID
- `get wifi.pwd` - Get WiFi password
- `get wifi.powersave` - Get WiFi power save mode (none/min/max)
#### Set Commands
- `set wifi.ssid <ssid>` - Set WiFi SSID
- `set wifi.pwd <password>` - Set WiFi password
- `set wifi.powersave none|min|max` - Set WiFi power save mode
- `none` - No power saving (best performance, highest power consumption)
- `min` - Minimum power saving (default, balanced performance and power)
- `max` - Maximum power saving (lowest power consumption, may affect performance)
### Timezone Commands
@@ -348,9 +354,14 @@ The device needs internet connectivity to publish to MQTT brokers.
set wifi.ssid "YourWiFiNetwork"
set wifi.pwd "YourWiFiPassword"
# Optionally configure WiFi power saving (default: min)
# Use "none" for best performance, "min" for balanced (default), "max" for lowest power
set wifi.powersave min
# Verify WiFi settings
get wifi.ssid
get wifi.pwd
get wifi.powersave
```
### Step 4: Configure Device Identity
@@ -449,6 +460,7 @@ Once configured, the device will automatically publish messages to MQTT brokers.
# Check WiFi settings
get wifi.ssid
get wifi.pwd
get wifi.powersave
# Reset WiFi settings
set wifi.ssid ""
@@ -457,6 +469,9 @@ set wifi.pwd ""
# Reconfigure with correct credentials
set wifi.ssid "YourWiFiNetwork"
set wifi.pwd "YourWiFiPassword"
# If connection issues persist, try disabling power saving for better reliability
set wifi.powersave none
```
#### No MQTT Messages Appearing