PowerSaving changes to variants:
- Fixed powerOff, shutdownPeripherals and added enterDeepSleep() - Keep time across reset for NRF52 - Minor fixes
This commit is contained in:
1 parent
2d94fe325d
commit
48a8e9ee8c
51 files changed
+201
-115
No files matched your search
@@ -43,11 +43,11 @@ public:
|
||||
}
|
||||
#endif
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
uint32_t button_pin = PIN_BUTTON1;
|
||||
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
|
||||
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
};
|
||||
@@ -2,6 +2,7 @@
|
||||
extends = nrf52_base
|
||||
board = rak4631
|
||||
board_check = true
|
||||
board_build.ldscript = boards/nrf52840_s140_v6.ld
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
${sensor_base.build_flags}
|
||||
-I variants/gat562_30s_mesh_kit
|
||||
|
||||
@@ -43,11 +43,11 @@ public:
|
||||
}
|
||||
#endif
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
uint32_t button_pin = PIN_BUTTON1;
|
||||
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
|
||||
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
};
|
||||
@@ -43,11 +43,11 @@ public:
|
||||
}
|
||||
#endif
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
uint32_t button_pin = PIN_BUTTON1;
|
||||
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
|
||||
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
};
|
||||
@@ -2,9 +2,11 @@
|
||||
extends = nrf52_base
|
||||
board = rak4631
|
||||
board_check = true
|
||||
board_build.ldscript = boards/nrf52840_s140_v6.ld
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
${sensor_base.build_flags}
|
||||
-I variants/gat562_mesh_tracker_pro
|
||||
; -D NRF52_POWER_MANAGEMENT
|
||||
-D PIN_BOARD_SCL=14
|
||||
-D PIN_BOARD_SDA=13
|
||||
-D PIN_OLED_RESET=-1
|
||||
|
||||
@@ -34,11 +34,11 @@ public:
|
||||
}
|
||||
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
uint32_t button_pin = PIN_BUTTON1;
|
||||
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
|
||||
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
};
|
||||
@@ -31,10 +31,6 @@ void HeltecRC32Board::begin() {
|
||||
}
|
||||
}
|
||||
|
||||
void HeltecRC32Board::powerOff() {
|
||||
enterDeepSleep(0);
|
||||
}
|
||||
|
||||
void HeltecRC32Board::onBeforeTransmit() {
|
||||
digitalWrite(P_LORA_TX_LED, HIGH);
|
||||
}
|
||||
|
||||
@@ -21,7 +21,6 @@ public:
|
||||
void begin();
|
||||
void onBeforeTransmit() override;
|
||||
void onAfterTransmit() override;
|
||||
void powerOff() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
bool setAdcMultiplier(float multiplier) override;
|
||||
float getAdcMultiplier() const override { return adc_mult; }
|
||||
|
||||
@@ -111,10 +111,11 @@ void T096Board::variant_shutdown() {
|
||||
nrf_gpio_cfg_default(PIN_GPS_TX);
|
||||
}
|
||||
|
||||
void T096Board::powerOff() {
|
||||
void T096Board::shutdownPeripherals() {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
loRaFEMControl.setSleepModeEnable();
|
||||
nrf_gpio_cfg_default(PIN_GPS_EN); // 363uA down to 39uA
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
const char* T096Board::getManufacturerName() const {
|
||||
|
||||
@@ -32,5 +32,5 @@ public:
|
||||
void onAfterTransmit(void) override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
const char* getManufacturerName() const override ;
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
};
|
||||
@@ -68,6 +68,7 @@ build_flags =
|
||||
-D MAX_NEIGHBOURS=50
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
|
||||
[env:Heltec_t096_repeater_bridge_rs232]
|
||||
extends = Heltec_t096
|
||||
@@ -134,6 +135,7 @@ build_flags =
|
||||
-D OFFLINE_QUEUE_SIZE=256
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
build_src_filter = ${Heltec_t096.build_src_filter}
|
||||
+<helpers/nrf52/SerialBLEInterface.cpp>
|
||||
+<../examples/companion_radio/*.cpp>
|
||||
|
||||
@@ -97,9 +97,10 @@ void T1Board::variant_shutdown() {
|
||||
digitalWrite(PIN_BAT_CTL, !ADC_CTRL_ENABLED);
|
||||
}
|
||||
|
||||
void T1Board::powerOff() {
|
||||
void T1Board::shutdownPeripherals() {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
variant_shutdown();
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
const char* T1Board::getManufacturerName() const {
|
||||
|
||||
@@ -22,5 +22,5 @@ public:
|
||||
void onAfterTransmit() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
const char* getManufacturerName() const override;
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
};
|
||||
@@ -46,11 +46,11 @@ public:
|
||||
return "Heltec T114";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
#ifdef LED_PIN
|
||||
digitalWrite(LED_PIN, HIGH);
|
||||
#endif
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -12,6 +12,7 @@ build_flags = ${nrf52_base.build_flags}
|
||||
-I variants/heltec_t114
|
||||
-I src/helpers/ui
|
||||
-D HELTEC_T114
|
||||
; -D NRF52_POWER_MANAGEMENT
|
||||
-D P_LORA_DIO_1=20
|
||||
-D P_LORA_NSS=24
|
||||
-D P_LORA_RESET=25
|
||||
@@ -172,6 +173,7 @@ build_flags =
|
||||
-D MAX_NEIGHBOURS=50
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
|
||||
[env:Heltec_t114_repeater_bridge_rs232]
|
||||
extends = Heltec_t114
|
||||
@@ -221,6 +223,7 @@ build_flags =
|
||||
-D OFFLINE_QUEUE_SIZE=256
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
|
||||
+<helpers/nrf52/SerialBLEInterface.cpp>
|
||||
+<../examples/companion_radio/*.cpp>
|
||||
@@ -255,3 +258,18 @@ lib_deps =
|
||||
extends = Heltec_t114
|
||||
build_src_filter = ${Heltec_t114.build_src_filter}
|
||||
+<../examples/kiss_modem/>
|
||||
|
||||
[env:Heltec_t114_sensor]
|
||||
extends = Heltec_t114_with_display
|
||||
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
|
||||
+<../examples/simple_sensor>
|
||||
build_flags =
|
||||
${Heltec_t114_with_display.build_flags}
|
||||
-D ADVERT_NAME='"Heltec_T114 Sensor"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D MAX_NEIGHBOURS=50
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
@@ -88,7 +88,9 @@ const char* HeltecTowerV2Board::getManufacturerName() const {
|
||||
return "Heltec Tower V2";
|
||||
}
|
||||
|
||||
void HeltecTowerV2Board::powerOff() {
|
||||
void HeltecTowerV2Board::shutdownPeripherals() {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
pinMode(PIN_GPS_EN, OUTPUT);
|
||||
digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
|
||||
pinMode(PIN_GPS_STANDBY, OUTPUT);
|
||||
@@ -99,5 +101,4 @@ void HeltecTowerV2Board::powerOff() {
|
||||
pinMode(PIN_BAT_CTL, OUTPUT);
|
||||
digitalWrite(PIN_BAT_CTL, LOW);
|
||||
variant_shutdown();
|
||||
sd_power_system_off();
|
||||
}
|
||||
}
|
||||
@@ -20,5 +20,5 @@ public:
|
||||
void onAfterTransmit() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
const char* getManufacturerName() const override;
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
};
|
||||
@@ -35,12 +35,12 @@ void HeltecTrackerV2Board::begin() {
|
||||
loRaFEMControl.setRxModeEnable();
|
||||
}
|
||||
|
||||
void HeltecTrackerV2Board::powerOff() {
|
||||
void HeltecTrackerV2Board::shutdownPeripherals() {
|
||||
ESP32Board::shutdownPeripherals();
|
||||
|
||||
// Turn off PA
|
||||
digitalWrite(P_LORA_PA_POWER, LOW);
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
|
||||
|
||||
ESP32Board::powerOff();
|
||||
}
|
||||
|
||||
uint16_t HeltecTrackerV2Board::getBattMilliVolts() {
|
||||
|
||||
@@ -23,7 +23,7 @@ public:
|
||||
|
||||
void onBeforeTransmit(void) override;
|
||||
void onAfterTransmit(void) override;
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
const char* getManufacturerName() const override ;
|
||||
|
||||
|
||||
@@ -99,6 +99,29 @@ lib_deps =
|
||||
${Heltec_tracker_v2.lib_deps}
|
||||
${esp32_ota.lib_deps}
|
||||
|
||||
[env:heltec_tracker_v2_repeater_bridge_rs232]
|
||||
extends = Heltec_tracker_v2
|
||||
build_flags =
|
||||
${Heltec_tracker_v2.build_flags}
|
||||
-D ADVERT_NAME='"RS232 Bridge"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D MAX_NEIGHBOURS=50
|
||||
-D WITH_RS232_BRIDGE=Serial2
|
||||
-D WITH_RS232_BRIDGE_RX=44
|
||||
-D WITH_RS232_BRIDGE_TX=43
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
build_src_filter = ${Heltec_tracker_v2.build_src_filter}
|
||||
+<helpers/bridges/RS232Bridge.cpp>
|
||||
+<helpers/ui/ST7735Display.cpp>
|
||||
+<../examples/simple_repeater>
|
||||
lib_deps =
|
||||
${Heltec_tracker_v2.lib_deps}
|
||||
${esp32_ota.lib_deps}
|
||||
bakercp/CRC32 @ ^2.0.0
|
||||
|
||||
[env:heltec_tracker_v2_room_server]
|
||||
extends = Heltec_tracker_v2
|
||||
build_flags =
|
||||
|
||||
@@ -32,12 +32,12 @@ void HeltecV4Board::begin() {
|
||||
loRaFEMControl.setRxModeEnable();
|
||||
}
|
||||
|
||||
void HeltecV4Board::powerOff() {
|
||||
void HeltecV4Board::shutdownPeripherals() {
|
||||
ESP32Board::shutdownPeripherals();
|
||||
|
||||
// Turn off PA
|
||||
digitalWrite(P_LORA_PA_POWER, LOW);
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
|
||||
|
||||
ESP32Board::powerOff();
|
||||
}
|
||||
|
||||
uint16_t HeltecV4Board::getBattMilliVolts() {
|
||||
|
||||
@@ -29,7 +29,7 @@ public:
|
||||
|
||||
void onBeforeTransmit(void) override;
|
||||
void onAfterTransmit(void) override;
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
bool setAdcMultiplier(float multiplier) override {
|
||||
if (multiplier == 0.0f) {
|
||||
|
||||
@@ -7,6 +7,7 @@ build_flags =
|
||||
-I variants/heltec_v4
|
||||
-D HELTEC_LORA_V4
|
||||
-D USE_SX1262
|
||||
-D ARDUINO_USB_MODE=1 ; ARDUINO_USB_MODE in heltec_v4.json has no effect
|
||||
-D ESP32_CPU_FREQ=80
|
||||
-D RADIO_CLASS=CustomSX1262
|
||||
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
||||
@@ -392,6 +393,13 @@ lib_deps =
|
||||
${heltec_v4_tft.lib_deps}
|
||||
densaugeo/base64 @ ~1.4.0
|
||||
|
||||
[env:heltec_v4_expansionkit_tft_companion_radio_ble]
|
||||
extends = env:heltec_v4_tft_companion_radio_ble
|
||||
build_flags =
|
||||
${env:heltec_v4_tft_companion_radio_ble.build_flags}
|
||||
-D ENV_PIN_SDA=4
|
||||
-D ENV_PIN_SCL=3
|
||||
|
||||
[env:heltec_v4_tft_companion_radio_wifi]
|
||||
extends = heltec_v4_tft
|
||||
build_flags =
|
||||
|
||||
@@ -39,30 +39,10 @@ void HeltecV4R8Board::onAfterTransmit(void) {
|
||||
loRaFEMControl.setRxModeEnable();
|
||||
}
|
||||
|
||||
void HeltecV4R8Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
|
||||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
||||
|
||||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
||||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
||||
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
void HeltecV4R8Board::shutdownPeripherals() {
|
||||
ESP32Board::shutdownPeripherals();
|
||||
|
||||
loRaFEMControl.setRxModeEnableWhenMCUSleep();
|
||||
|
||||
if (pin_wake_btn < 0) {
|
||||
esp_sleep_enable_ext1_wakeup((1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);
|
||||
} else {
|
||||
esp_sleep_enable_ext1_wakeup((1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);
|
||||
}
|
||||
|
||||
if (secs > 0) {
|
||||
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
||||
}
|
||||
|
||||
esp_deep_sleep_start();
|
||||
}
|
||||
|
||||
void HeltecV4R8Board::powerOff() {
|
||||
enterDeepSleep(0);
|
||||
}
|
||||
|
||||
uint16_t HeltecV4R8Board::getBattMilliVolts() {
|
||||
|
||||
@@ -30,8 +30,7 @@ public:
|
||||
|
||||
void onBeforeTransmit(void) override;
|
||||
void onAfterTransmit(void) override;
|
||||
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
bool setAdcMultiplier(float multiplier) override {
|
||||
if (multiplier == 0.0f) {
|
||||
|
||||
@@ -22,8 +22,8 @@ void initVariant() {
|
||||
|
||||
pinMode(LED_RED, OUTPUT);
|
||||
pinMode(LED_GREEN, OUTPUT);
|
||||
pinMode(LED_BLUE, OUTPUT);
|
||||
digitalWrite(LED_BLUE, HIGH);
|
||||
// pinMode(LED_BLUE, OUTPUT);
|
||||
// digitalWrite(LED_BLUE, HIGH);
|
||||
digitalWrite(LED_GREEN, HIGH);
|
||||
digitalWrite(LED_RED, HIGH);
|
||||
|
||||
|
||||
@@ -52,6 +52,7 @@ build_flags =
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D CORE_DEBUG_LEVEL=3
|
||||
-D PIN_USER_BTN=-1 ; Disabled button press which prevents repeater to boot
|
||||
lib_deps =
|
||||
${LilyGo_TLora_V2_1_1_6.lib_deps}
|
||||
${esp32_ota.lib_deps}
|
||||
|
||||
@@ -9,7 +9,7 @@ protected:
|
||||
uint8_t btn_prev_state;
|
||||
|
||||
public:
|
||||
MeshtinyBoard() : NRF52Board("Meshtiny_OTA") {}
|
||||
MeshtinyBoard() : NRF52Board("Meshtiny OTA") {}
|
||||
void begin();
|
||||
|
||||
#if defined(P_LORA_TX_LED)
|
||||
@@ -34,7 +34,8 @@ public:
|
||||
|
||||
void reboot() override { NVIC_SystemReset(); }
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
#ifdef PIN_USER_BTN
|
||||
while (digitalRead(PIN_USER_BTN) == LOW) {
|
||||
@@ -59,8 +60,5 @@ public:
|
||||
#ifdef PIN_USER_BTN
|
||||
nrf_gpio_cfg_sense_input(g_ADigitalPinMap[PIN_USER_BTN], NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
||||
#endif
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
};
|
||||
@@ -45,7 +45,9 @@ public:
|
||||
return "Minewsemi";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
#ifdef HAS_GPS
|
||||
digitalWrite(GPS_VRTC_EN, LOW);
|
||||
digitalWrite(GPS_RESET, LOW);
|
||||
@@ -65,7 +67,6 @@ public:
|
||||
#ifdef BUTTON_PIN
|
||||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
||||
#endif
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
|
||||
#if defined(P_LORA_TX_LED)
|
||||
|
||||
@@ -20,6 +20,8 @@ public:
|
||||
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
void powerOff() override {
|
||||
shutdownPeripherals();
|
||||
|
||||
initiateShutdown(SHUTDOWN_REASON_USER);
|
||||
}
|
||||
#endif
|
||||
|
||||
@@ -43,7 +43,9 @@ public:
|
||||
|
||||
const char *getManufacturerName() const override { return "Nano G2 Ultra"; }
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
// put GPS chip to sleep
|
||||
digitalWrite(PIN_GPS_STANDBY, LOW);
|
||||
// TODO: unset buzzer to prevent notification circuit activating on hibernate
|
||||
@@ -51,7 +53,5 @@ public:
|
||||
|
||||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(PIN_USER_BTN), NRF_GPIO_PIN_NOPULL,
|
||||
NRF_GPIO_PIN_SENSE_LOW);
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -1,6 +1,7 @@
|
||||
[Promicro]
|
||||
extends = nrf52_base
|
||||
board = promicro_nrf52840
|
||||
board_build.ldscript = boards/nrf52840_s140_v6.ld
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
-I variants/promicro
|
||||
-D PROMICRO
|
||||
|
||||
@@ -2,6 +2,7 @@
|
||||
extends = nrf52_base
|
||||
board = rak4631
|
||||
board_check = true
|
||||
board_build.ldscript = boards/nrf52840_s140_v6.ld
|
||||
extra_scripts = ${nrf52_base.extra_scripts}
|
||||
post:variants/rak4631/fix_bsec_lib.py
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
@@ -48,6 +49,7 @@ build_flags =
|
||||
-D MAX_NEIGHBOURS=50
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
build_src_filter = ${rak4631.build_src_filter}
|
||||
+<helpers/ui/SSD1306Display.cpp>
|
||||
+<../examples/simple_repeater>
|
||||
@@ -219,10 +221,11 @@ build_flags =
|
||||
-D MAX_CONTACTS=350
|
||||
-D MAX_GROUP_CHANNELS=40
|
||||
-D BLE_PIN_CODE=123456
|
||||
-D BLE_DEBUG_LOGGING=1
|
||||
; -D BLE_DEBUG_LOGGING=1
|
||||
-D OFFLINE_QUEUE_SIZE=256
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
build_src_filter = ${rak4631.build_src_filter}
|
||||
+<helpers/nrf52/SerialBLEInterface.cpp>
|
||||
+<../examples/companion_radio/*.cpp>
|
||||
|
||||
@@ -40,7 +40,9 @@ public:
|
||||
return "RAK WisMesh Tag";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
#ifdef BUZZER_EN
|
||||
digitalWrite(BUZZER_EN, LOW);
|
||||
#endif
|
||||
@@ -68,7 +70,5 @@ public:
|
||||
// configure button press to wake up when in powered off state
|
||||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
||||
#endif
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -2,6 +2,7 @@
|
||||
extends = nrf52_base
|
||||
board = rak4631
|
||||
board_check = true
|
||||
board_build.ldscript = boards/nrf52840_s140_v6.ld
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
${sensor_base.build_flags}
|
||||
-I variants/rak_wismesh_tag
|
||||
|
||||
@@ -37,7 +37,9 @@ public:
|
||||
return "Seeed SenseCap Solar";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
digitalWrite(LED_WHITE, LOW);
|
||||
digitalWrite(LED_BLUE, LOW);
|
||||
|
||||
@@ -50,6 +52,10 @@ public:
|
||||
// Keep pull-up enabled in system-off so the wake line doesn't float low.
|
||||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_BUTTON1]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
||||
#endif
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
shutdownPeripherals();
|
||||
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
initiateShutdown(SHUTDOWN_REASON_USER);
|
||||
|
||||
@@ -1,6 +1,8 @@
|
||||
#include "StationG3Board.h"
|
||||
|
||||
void StationG3Board::powerOff() {
|
||||
void StationG3Board::shutdownPeripherals() {
|
||||
ESP32Board::shutdownPeripherals();
|
||||
|
||||
loRaFEMControl.setSleepModeEnable();
|
||||
#ifdef P_PA1_EN
|
||||
rtc_gpio_hold_en((gpio_num_t)P_PA1_EN);
|
||||
@@ -9,8 +11,6 @@ void StationG3Board::powerOff() {
|
||||
#ifdef P_PRIMARY_LNA_EN
|
||||
rtc_gpio_hold_en((gpio_num_t)P_PRIMARY_LNA_EN);
|
||||
#endif
|
||||
|
||||
ESP32Board::powerOff();
|
||||
}
|
||||
|
||||
bool StationG3Board::setLoRaFemLnaEnabled(bool enable) {
|
||||
|
||||
@@ -53,7 +53,7 @@ public:
|
||||
loRaFEMControl.setRxModeEnable();
|
||||
}
|
||||
|
||||
void powerOff() override;
|
||||
void shutdownPeripherals() override;
|
||||
|
||||
uint16_t getBattMilliVolts() override {
|
||||
return 0;
|
||||
|
||||
@@ -49,7 +49,9 @@ public:
|
||||
return 0;
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
#ifdef HAS_GPS
|
||||
digitalWrite(GPS_VRTC_EN, LOW);
|
||||
digitalWrite(GPS_RESET, LOW);
|
||||
@@ -83,7 +85,5 @@ public:
|
||||
#ifdef BUTTON_PIN
|
||||
nrf_gpio_cfg_sense_input(BUTTON_PIN, NRF_GPIO_PIN_NOPULL, NRF_GPIO_PIN_SENSE_HIGH);
|
||||
#endif
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -128,3 +128,20 @@ build_src_filter = ${t1000-e.build_src_filter}
|
||||
+<../examples/kiss_modem/>
|
||||
lib_deps = ${t1000-e.lib_deps}
|
||||
stevemarple/MicroNMEA @ ^2.0.6
|
||||
|
||||
[env:t1000e_sensor]
|
||||
extends = t1000-e
|
||||
build_flags = ${t1000-e.build_flags}
|
||||
-I examples/companion_radio/ui-orig
|
||||
-D ADVERT_NAME='"t1000-e Sensor"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D MAX_NEIGHBOURS=50
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
; -D POWERSAVING_DEBUG=1
|
||||
build_src_filter = ${t1000-e.build_src_filter}
|
||||
+<../examples/simple_sensor>
|
||||
lib_deps = ${t1000-e.lib_deps}
|
||||
stevemarple/MicroNMEA @ ^2.0.6
|
||||
@@ -32,14 +32,12 @@ public:
|
||||
return "Elecrow ThinkNode-M1";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
// turn off all leds, sd_power_system_off will not do this for us
|
||||
#ifdef P_LORA_TX_LED
|
||||
digitalWrite(P_LORA_TX_LED, LOW);
|
||||
#endif
|
||||
|
||||
// power off board
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -42,13 +42,12 @@ public:
|
||||
return 0;
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
// turn off all leds, sd_power_system_off will not do this for us
|
||||
digitalWrite(PIN_LED_BLUE, !LED_STATE_ON);
|
||||
digitalWrite(PIN_LED_GREEN, !LED_STATE_ON);
|
||||
digitalWrite(PIN_LED_RED, !LED_STATE_ON);
|
||||
|
||||
// power off board
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -65,14 +65,12 @@ public:
|
||||
return isSolarChargerActive() || isUsbPowered();
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
// turn off all leds, sd_power_system_off will not do this for us
|
||||
#ifdef P_LORA_TX_LED
|
||||
digitalWrite(P_LORA_TX_LED, LOW);
|
||||
#endif
|
||||
|
||||
// power off board
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -82,7 +82,7 @@ build_flags =
|
||||
-D MAX_CONTACTS=350
|
||||
-D MAX_GROUP_CHANNELS=40
|
||||
-D BLE_PIN_CODE=123456
|
||||
-D BLE_DEBUG_LOGGING=1
|
||||
; -D BLE_DEBUG_LOGGING=1
|
||||
-D OFFLINE_QUEUE_SIZE=256
|
||||
-D AUTO_SHUTDOWN_MILLIVOLTS=3300
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
|
||||
@@ -33,8 +33,4 @@ public:
|
||||
const char* getManufacturerName() const override {
|
||||
return "Seeed Wio Tracker L1";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
@@ -36,6 +36,8 @@ build_flags =
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D MAX_NEIGHBOURS=50
|
||||
-D DISPLAY_CLASS=SH1106Display
|
||||
-D ENV_PIN_SDA=PIN_WIRE1_SDA
|
||||
-D ENV_PIN_SCL=PIN_WIRE1_SCL
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
lib_deps = ${WioTrackerL1.lib_deps}
|
||||
@@ -50,6 +52,8 @@ build_flags = ${WioTrackerL1.build_flags}
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D ROOM_PASSWORD='"hello"'
|
||||
-D DISPLAY_CLASS=SH1106Display
|
||||
-D ENV_PIN_SDA=PIN_WIRE1_SDA
|
||||
-D ENV_PIN_SCL=PIN_WIRE1_SCL
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
lib_deps = ${WioTrackerL1.lib_deps}
|
||||
|
||||
@@ -30,7 +30,7 @@ build_src_filter = ${nrf52_base.build_src_filter}
|
||||
+<helpers/sensors>
|
||||
+<../variants/wio_wm1110>
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
upload_protocol = nrfutil
|
||||
lib_deps = ${nrf52_base.lib_deps}
|
||||
${sensor_base.lib_deps}
|
||||
adafruit/Adafruit LIS3DH @ ^1.2.4
|
||||
@@ -84,8 +84,8 @@ build_src_filter = ${wio_wm1110.build_src_filter}
|
||||
lib_deps =
|
||||
${wio_wm1110.lib_deps}
|
||||
densaugeo/base64 @ ~1.4.0
|
||||
|
||||
[env:wio_wm1110_kiss_modem]
|
||||
extends = wio_wm1110
|
||||
build_src_filter = ${wio_wm1110.build_src_filter}
|
||||
+<../examples/kiss_modem/>
|
||||
|
||||
[env:wio_wm1110_kiss_modem]
|
||||
extends = wio_wm1110
|
||||
build_src_filter = ${wio_wm1110.build_src_filter}
|
||||
+<../examples/kiss_modem/>
|
||||
@@ -35,7 +35,9 @@ public:
|
||||
return "Seeed Xiao-nrf52";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
void shutdownPeripherals() override {
|
||||
NRF52Board::shutdownPeripherals();
|
||||
|
||||
// set led on and wait for button release before poweroff
|
||||
digitalWrite(PIN_LED, LOW);
|
||||
#ifdef PIN_USER_BTN
|
||||
@@ -49,8 +51,6 @@ public:
|
||||
// configure button press to wake up when in powered off state
|
||||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_USER_BTN]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
||||
#endif
|
||||
|
||||
NRF52Board::powerOff();
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
@@ -9,6 +9,7 @@ build_flags = ${nrf52_base.build_flags}
|
||||
-I variants/xiao_nrf52
|
||||
-UENV_INCLUDE_GPS
|
||||
-D NRF52_PLATFORM
|
||||
; -D NRF52_POWER_MANAGEMENT
|
||||
-D XIAO_NRF52
|
||||
-D USE_SX1262
|
||||
-D RADIO_CLASS=CustomSX1262
|
||||
@@ -110,6 +111,24 @@ build_flags =
|
||||
build_src_filter = ${Xiao_nrf52.build_src_filter}
|
||||
+<../examples/simple_room_server/*.cpp>
|
||||
|
||||
[env:Xiao_nrf52_repeater_bridge_rs232]
|
||||
extends = Xiao_nrf52
|
||||
build_flags =
|
||||
${Xiao_nrf52.build_flags}
|
||||
-D ADVERT_NAME='"RS232 Bridge"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D MAX_NEIGHBOURS=50
|
||||
-D WITH_RS232_BRIDGE=Serial1
|
||||
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
|
||||
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
|
||||
; -D MESH_PACKET_LOGGING=1
|
||||
; -D MESH_DEBUG=1
|
||||
build_src_filter = ${Xiao_nrf52.build_src_filter}
|
||||
+<helpers/bridges/RS232Bridge.cpp>
|
||||
+<../examples/simple_repeater>
|
||||
|
||||
[env:Xiao_nrf52_kiss_modem]
|
||||
extends = Xiao_nrf52
|
||||
build_flags =
|
||||
|
||||
@@ -6,8 +6,8 @@ board_build.mcu = esp32s3
|
||||
build_flags = ${esp32_base.build_flags}
|
||||
${sensor_base.build_flags}
|
||||
-I variants/xiao_s3_wio
|
||||
-UENV_INCLUDE_GPS
|
||||
-D SEEED_XIAO_S3
|
||||
-D PIN_VBAT_READ=D1
|
||||
-D P_LORA_DIO_1=39
|
||||
-D P_LORA_NSS=41
|
||||
-D P_LORA_RESET=42 ; RADIOLIB_NC
|
||||
@@ -29,6 +29,10 @@ build_flags = ${esp32_base.build_flags}
|
||||
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
||||
-D LORA_TX_POWER=22
|
||||
-D SX126X_RX_BOOSTED_GAIN=1
|
||||
-D PIN_GPS_RX=D6
|
||||
-D PIN_GPS_TX=D7
|
||||
-D PIN_GPS_EN=D0
|
||||
-D PIN_GPS_RESET=D2
|
||||
build_src_filter = ${esp32_base.build_src_filter}
|
||||
+<../variants/xiao_s3_wio>
|
||||
+<helpers/sensors>
|
||||
|
||||
@@ -14,7 +14,14 @@ WRAPPER_CLASS radio_driver(radio, board);
|
||||
|
||||
ESP32RTCClock fallback_clock;
|
||||
AutoDiscoverRTCClock rtc_clock(fallback_clock);
|
||||
EnvironmentSensorManager sensors;
|
||||
|
||||
#if ENV_INCLUDE_GPS
|
||||
#include <helpers/sensors/MicroNMEALocationProvider.h>
|
||||
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN);
|
||||
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
|
||||
#else
|
||||
EnvironmentSensorManager sensors;
|
||||
#endif
|
||||
|
||||
#ifdef DISPLAY_CLASS
|
||||
DISPLAY_CLASS display;
|
||||
|
||||
Reference in new issue
Block a user