Fixed to support usb companions

This commit is contained in:
Kevin Le committed 2026-08-18 20:57:20 +07:00
1 parent 11222035ee
commit 4027acc74b
1 file changed
+15 -14
+15 -14
View File
@@ -248,16 +248,11 @@ void setup() {
board.onBootComplete();
#ifdef ESP32_PLATFORM
#if !CONFIG_IDF_TARGET_ESP32C6
// Enable BLE sleep
esp_err_t errBLESleep = esp_bt_sleep_enable();
if (errBLESleep == ESP_OK) {
Serial.println("Bluetooth sleep enabled successfully");
} else {
Serial.printf("Bluetooth sleep enable failed: %s\n", esp_err_to_name(errBLESleep));
}
#endif
#if defined(ESP32_PLATFORM)
#if defined(BLE_PIN_CODE) && !CONFIG_IDF_TARGET_ESP32C6
// Enable BLE sleep
esp_bt_sleep_enable();
#endif
#if CONFIG_IDF_TARGET_ESP32C3
esp_pm_config_esp32c3_t pm_config;
@@ -270,7 +265,11 @@ void setup() {
#endif
// Configure Power Management
pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = true };
#if CONFIG_IDF_TARGET_ESP32C3 && defined(ENABLE_USB_INTERFACE)
pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = false };
#else
pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = true };
#endif
esp_err_t errPM = esp_pm_configure(&pm_config);
if (errPM == ESP_OK) {
Serial.println("Power Management configured successfully");
@@ -296,11 +295,13 @@ void loop() {
#if defined(NRF52_PLATFORM)
board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
#elif defined(ESP32_PLATFORM)
#if defined(BLE_PIN_CODE)
#if defined(BLE_PIN_CODE)
if (!bluetooth_interface.isReadBusy() && !bluetooth_interface.isWriteBusy()) { // BLE is not busy
vTaskDelay(pdMS_TO_TICKS(10)); // attempt to sleep
vTaskDelay(pdMS_TO_TICKS(10)); // attempt to sleep
}
#endif
#elif defined(ENABLE_USB_INTERFACE)
vTaskDelay(pdMS_TO_TICKS(10)); // attempt to sleep
#endif
#endif
}