Power off board including radio, display, GPS and components

examples/companion_radio/ui-new/UITask.cpp

@@ -697,8 +697,7 @@ void UITask::shutdown(bool restart){
   if (restart) {
     _board->reboot();
   } else {
-    _display->turnOff();
-    radio_driver.powerOff();
+    // Power off board including radio, display, GPS and components
     _board->powerOff();
   }
 }

examples/companion_radio/ui-orig/UITask.cpp

@@ -307,7 +307,7 @@ void UITask::shutdown(bool restart){
   if (restart) {
     _board->reboot();
   } else {
-    radio_driver.powerOff();
+    // Power off board including radio, display, GPS and components
     _board->powerOff();
   }
 }

examples/companion_radio/ui-tiny/UITask.cpp

@@ -566,8 +566,7 @@ void UITask::shutdown(bool restart){
   if (restart) {
     _board->reboot();
   } else {
-    _display->turnOff();
-    radio_driver.powerOff();
+    // Power off board including radio, display, GPS and components
     _board->powerOff();
   }
 }

src/helpers/ESP32Board.cpp

@@ -1,6 +1,7 @@
 #ifdef ESP_PLATFORM
 
 #include "ESP32Board.h"
+#include <target.h>
 
 #if defined(ADMIN_PASSWORD) && !defined(DISABLE_WIFI_OTA)   // Repeater or Room Server only
 #include <WiFi.h>
@@ -44,4 +45,45 @@ bool ESP32Board::startOTAUpdate(const char* id, char reply[]) {
 }
 #endif
 
+void ESP32Board::powerOff() {
+  enterDeepSleep(0); // Do not wakeup
+}
+
+void ESP32Board::enterDeepSleep(uint32_t secs) {
+  // Power off the display if any
+#ifdef DISPLAY_CLASS
+  display.turnOff();
+#endif
+
+  // Power off LoRa
+  radio_driver.powerOff();
+
+  // Keep LoRa inactive during deepsleep
+  digitalWrite(P_LORA_NSS, HIGH);
+#if CONFIG_IDF_TARGET_ESP32C3
+  gpio_hold_en((gpio_num_t)P_LORA_NSS);
+#else
+  rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+#endif
+
+  // Power off GPS if any
+  if (sensors.getLocationProvider() != NULL) {
+    sensors.getLocationProvider()->stop();
+  }
+
+  // Flush serial buffers
+  Serial.flush();
+  delay(100);
+
+  // Clear stale wakeup sources to avoid ghost wakeup
+  // This is required when Power Management and automatic lightsleep are enabled
+  esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
+
+  if (secs > 0) {
+    esp_sleep_enable_timer_wakeup(secs * 1000000ULL);
+  }
+
+  // Finally set ESP32 into deepsleep
+  esp_deep_sleep_start(); // CPU halts here and never returns!
+}
 #endif

src/helpers/ESP32Board.h

@@ -63,30 +63,8 @@ public:
     return raw / 4;
   }
 
-  void powerOff() override {
-    enterDeepSleep(0); // Do not wakeup
-  }
-
-  void enterDeepSleep(uint32_t secs) {
-    // Clear stale wakeup sources to avoid ghost wakeup
-    // This is required when Power Management and automatic lightsleep are enabled
-    esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
-
-    if (secs > 0) {
-      esp_sleep_enable_timer_wakeup(secs * 1000000ULL);
-    }
-
-    // Keep LoRa inactive during deepsleep
-    digitalWrite(P_LORA_NSS, HIGH);
-#if CONFIG_IDF_TARGET_ESP32C3
-    gpio_hold_en((gpio_num_t)P_LORA_NSS);
-#else
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
-#endif
-
-    // Finally set ESP32 into deepsleep
-    esp_deep_sleep_start();   // CPU halts here and never returns!
-  }
+  virtual void powerOff() override;
+  void enterDeepSleep(uint32_t secs);
 
   uint32_t getIRQGpio() override {
     return P_LORA_DIO_1; // default for SX1262

src/helpers/NRF52Board.cpp

@@ -1,5 +1,6 @@
 #if defined(NRF52_PLATFORM)
 #include "NRF52Board.h"
+#include <target.h>
 
 #include <bluefruit.h>
 #include <nrf_soc.h>
@@ -297,6 +298,37 @@ float NRF52Board::getMCUTemperature() {
   return temp * 0.25f; // Convert to *C
 }
 
+void NRF52Board::powerOff() {
+  // Power off the display if any
+#ifdef DISPLAY_CLASS
+  display.turnOff();
+#endif
+
+  // Power off LoRa
+  radio_driver.powerOff();
+
+  // Keep LoRa inactive during deepsleep
+  digitalWrite(P_LORA_NSS, HIGH);
+
+  // Power off GPS if any
+  if(sensors.getLocationProvider() != NULL) {
+    sensors.getLocationProvider()->stop();
+  }
+
+  // Flush serial buffers
+  Serial.flush();
+  delay(100);
+
+  // Enter SYSTEMOFF
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+  if (sd_enabled) { // SoftDevice is enabled
+    sd_power_system_off();
+  } else { // SoftDevice is not enable
+    NRF_POWER->SYSTEMOFF = POWER_SYSTEMOFF_SYSTEMOFF_Enter;
+  }
+}
+
 bool NRF52Board::getBootloaderVersion(char* out, size_t max_len) {
     static const char BOOTLOADER_MARKER[] = "UF2 Bootloader ";
     const uint8_t* flash = (const uint8_t*)0x000FB000; // earliest known info.txt location is 0xFB90B, latest is 0xFCC4B

src/helpers/NRF52Board.h

@@ -50,6 +50,7 @@ public:
   virtual uint8_t getStartupReason() const override { return startup_reason; }
   virtual float getMCUTemperature() override;
   virtual void reboot() override { NVIC_SystemReset(); }
+  virtual void powerOff() override;
   virtual bool getBootloaderVersion(char* version, size_t max_len) override;
   virtual bool startOTAUpdate(const char *id, char reply[]) override;
   virtual void sleep(uint32_t secs) override;

variants/heltec_t096/T096Board.cpp

@@ -112,13 +112,9 @@ void T096Board::variant_shutdown() {
 }
 
 void T096Board::powerOff() {
-#if ENV_INCLUDE_GPS == 1
-    pinMode(PIN_GPS_EN, OUTPUT);
-    digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
-#endif
-    loRaFEMControl.setSleepModeEnable();
-    variant_shutdown();
-    sd_power_system_off();
+  loRaFEMControl.setSleepModeEnable();
+  nrf_gpio_cfg_default(PIN_GPS_EN); // 363uA down to 39uA
+  NRF52Board::powerOff();
 }
 
 const char* T096Board::getManufacturerName() const {

variants/heltec_t1/T1Board.cpp

@@ -81,34 +81,6 @@ uint16_t T1Board::getBattMilliVolts() {
 }
 
 void T1Board::variant_shutdown() {
-  nrf_gpio_cfg_default(PIN_TFT_CS);
-  nrf_gpio_cfg_default(PIN_TFT_DC);
-  nrf_gpio_cfg_default(PIN_TFT_SDA);
-  nrf_gpio_cfg_default(PIN_TFT_SCL);
-  nrf_gpio_cfg_default(PIN_TFT_RST);
-  nrf_gpio_cfg_default(PIN_TFT_LEDA_CTL);
-  nrf_gpio_cfg_default(PIN_TFT_VDD_CTL);
-
-  nrf_gpio_cfg_default(PIN_WIRE_SDA);
-  nrf_gpio_cfg_default(PIN_WIRE_SCL);
-
-  nrf_gpio_cfg_default(LORA_CS);
-  nrf_gpio_cfg_default(SX126X_DIO1);
-  nrf_gpio_cfg_default(SX126X_BUSY);
-  nrf_gpio_cfg_default(SX126X_RESET);
-  nrf_gpio_cfg_default(PIN_SPI_MISO);
-  nrf_gpio_cfg_default(PIN_SPI_MOSI);
-  nrf_gpio_cfg_default(PIN_SPI_SCK);
-
-  nrf_gpio_cfg_default(PIN_SPI1_MOSI);
-  nrf_gpio_cfg_default(PIN_SPI1_SCK);
-
-  nrf_gpio_cfg_default(PIN_GPS_RESET);
-  nrf_gpio_cfg_default(PIN_GPS_EN);
-  nrf_gpio_cfg_default(PIN_GPS_PPS);
-  nrf_gpio_cfg_default(PIN_GPS_RX);
-  nrf_gpio_cfg_default(PIN_GPS_TX);
-
   nrf_gpio_cfg_default(PIN_BUZZER_VOLTAGE_MULTIPLIER_1);
   nrf_gpio_cfg_default(PIN_BUZZER_VOLTAGE_MULTIPLIER_2);
 
@@ -127,7 +99,7 @@ void T1Board::variant_shutdown() {
 
 void T1Board::powerOff() {
   variant_shutdown();
-  sd_power_system_off();
+  NRF52Board::powerOff();
 }
 
 const char* T1Board::getManufacturerName() const {

variants/heltec_t114/T114Board.h

@@ -50,10 +50,7 @@ public:
 #ifdef LED_PIN
     digitalWrite(LED_PIN, HIGH);
 #endif
-#if ENV_INCLUDE_GPS == 1
-    pinMode(GPS_EN, OUTPUT);
-    digitalWrite(GPS_EN, LOW);
-#endif
-    sd_power_system_off();
+
+    NRF52Board::powerOff();
   }
 };

variants/lilygo_techo_card/TechoCardBoard.cpp

@@ -91,7 +91,7 @@ void TechoCardBoard::powerOff() {
   nrf_gpio_cfg_sense_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
   turnOffLeds();
   digitalWrite(PIN_PWR_EN, LOW);
-  sd_power_system_off();
+  NRF52Board::powerOff();
 }
 
 #endif

variants/sensecap_solar/SenseCapSolarBoard.h

@@ -54,7 +54,7 @@ public:
 #ifdef NRF52_POWER_MANAGEMENT
     initiateShutdown(SHUTDOWN_REASON_USER);
 #else
-    sd_power_system_off();
+    NRF52Board::powerOff();
 #endif
   }
 };