From fff912fb4d840840ace363dabf1ec0458572d73c Mon Sep 17 00:00:00 2001 From: "Rich O." Date: Thu, 19 Nov 2026 22:19:53 -0500 Subject: [PATCH] docs: SB-LoRa rev 2 connector: the J1 listing photo shows an AMP-marked part with no part number but it's sold as Jiansu BST, so the land pattern comes from the parts that arrive and they're bought in one lot --- hardware/sb-lora/REV2.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hardware/sb-lora/REV2.md b/hardware/sb-lora/REV2.md index 38ff868..e280e54 100644 --- a/hardware/sb-lora/REV2.md +++ b/hardware/sb-lora/REV2.md @@ -68,7 +68,7 @@ A 16550-style UART on csSlot1 replaces rev 1's SC16IS740 SPI bridge and its latc ## Open -- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked. Candidate: a generic 68-pin female PCMCIA connector sold on AliExpress for CF-to-PC Card adapters (https://www.aliexpress.com/item/32843057045.html, about $8.50 for 5). The listing photos show it's the female side, with both rows of tails flat on the top, but there's no drawing, so the land pattern has to be measured from a sample. Hirose IC1K-68RD-1.27SF(71) (LCSC C17285563) is listed as "Connector and Ejector", which reads as the host-side socket; it isn't confirmed either way. Ruled out: TE 5535657 (the host-side header), Hirose IC1F-68RD-1.27SF and IC9 (obsolete), Amphenol 10014744-007T and 71299-050CALF (out of production), and Amphenol 7111S1615A01LF (a SIM card tray). "Amphenol 1C1K" never turned up as a real part number. The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line. +- **Connector: the Hirose IC1HA order was cancelled (2026-11-17)**, so rev 2 drops the straddle footprint for a single-sided SMT PC Card receptacle (both rows of tails on the top side), harvested or stocked. Candidate: a generic 68-pin female PCMCIA connector sold on AliExpress for CF-to-PC Card adapters (https://www.aliexpress.com/item/32843057045.html, about $8.50 for 5). The listing photos show it's the female side, with both rows of tails flat on the top, but there's no drawing, so the land pattern has to be measured from a sample. The photos show an AMP marking with no part number, while the listing calls it "Jiansu" model "BST", so the photo may be of a different part from what ships. Measure the parts that arrive, check any later batch against them, and buy enough for every board in one order in case the stock is pulls or old stock. Hirose IC1K-68RD-1.27SF(71) (LCSC C17285563) is listed as "Connector and Ejector", which reads as the host-side socket; it isn't confirmed either way. Ruled out: TE 5535657 (the host-side header), Hirose IC1F-68RD-1.27SF and IC9 (obsolete), Amphenol 10014744-007T and 71299-050CALF (out of production), and Amphenol 7111S1615A01LF (a SIM card tray). "Amphenol 1C1K" never turned up as a real part number. The Springboard uses the same 68-pin PCMCIA contacts (Dev Guide §5, §7.1), and the keying is in the module's plastic case, not the connector. Needed from a sample: markings, tail pitch, row spacing, tail distance from the mating face, and board surface height relative to the contact centre line. - **Case.** The keying is in the module case, so rev 2 needs a case (printed, or a harvested Springboard shell) whose key and latch match the slot, with the board held at the connector's height. Dry-fit a bare harvested connector in the slot to check the contacts seat fully. - **Board thickness.** The straddle connector forces 1.6 mm; a top-mount one may allow 0.8-1.0 mm. - **LiPo size.** The aim is at least a few days per charge. Estimate, to be replaced by a measurement: