diff --git a/docs/progress.md b/docs/progress.md index 1d5ac00..0f4c6dd 100644 --- a/docs/progress.md +++ b/docs/progress.md @@ -17,7 +17,7 @@ ### Firmware - [x] Apply `firmware/meshcore-xiao-nrf52-uart-companion.patch` to MeshCore, build `Xiao_nrf52_companion_radio_uart` (`firmware/Makefile`, MeshCore a366955c, GCC 14 on Apple Silicon) - [x] Flashed to the XIAO; answers `CMD_DEVICE_QUERY` over USB with DEVICE_INFO (v1.17.1) -- [ ] Bench-test the D6/D7 UART over a 3.3 V USB-TTL adapter (`firmware/tools/companion_query.py`) +- [x] Bench-test the D6/D7 UART: FT232R at 3.3 V, 115200 8N1, DEVICE_INFO identical to the USB reply - [ ] Plug stack into carrier; `CMD_DEVICE_QUERY` gets a DEVICE_INFO reply ### Palm client @@ -56,3 +56,4 @@ - macOS USB sync to the Visor works with pilot-link from desrod's repo. Fixed a race where macOS holds the Visor briefly when it appears, so pilot-link's single open attempt failed with exclusive access. The retry patch is saved in `palm-client/tools/`. - First on-device run: VisorMesh v0.1 installed with `make install` and launches on the Visor Neo. - Firmware builds and runs. Fixed the patch's I2C override (`-U` flags broke Wire under PlatformIO; now `build_unflags`). Pinned native GCC 14 on Apple Silicon. Enabled the USB companion link alongside the UART. The XIAO answers DEVICE_QUERY over USB, and that real frame is now a Palm host test. +- UART path verified: FT232R on D6/D7 at 115200 8N1 gets the same DEVICE_INFO as USB. The radio side of SB-LoRa is proven; what remains is the carrier board (SC16IS740 + bus) and the Palm transport for it. diff --git a/firmware/README.md b/firmware/README.md index 93e2941..0467f0b 100644 --- a/firmware/README.md +++ b/firmware/README.md @@ -20,7 +20,7 @@ On Apple Silicon without Rosetta, the nRF52 platform's default GCC 7.2.1 (x86_64 Verified: builds cleanly (RAM 60.8%, flash 54.0%); the compile flags show `PIN_WIRE_SCL=16`, `PIN_WIRE_SDA=17`, `SERIAL_TX=D6`, `SERIAL_RX=D7`. -Verified on hardware (2026-11-01): flashed to the SB-LoRa XIAO (serial `87F2365FB1415308`). Over USB it answers `CMD_DEVICE_QUERY` with DEVICE_INFO: MeshCore v1.17.1, "Seeed Xiao-nrf52". The D6/D7 UART path still needs a 3.3 V USB-TTL adapter to test. +Verified on hardware (2026-11-01): flashed to the SB-LoRa XIAO (serial `87F2365FB1415308`). Over USB it answers `CMD_DEVICE_QUERY` with DEVICE_INFO: MeshCore v1.17.1, "Seeed Xiao-nrf52". Over an FT232R USB-TTL adapter on D6 (TX) / D7 (RX) at 115200 8N1 it returns the identical DEVICE_INFO frame. ## tools/companion_query.py