MeshTerm/docs/hardware.md

MeshTerm on hardware

MeshTerm talks to a node — a MeshCore radio that speaks the companion protocol over serial, Bluetooth LE or TCP. Plug a companion board into USB, or pair one over Bluetooth, and none of this page applies: MeshTerm finds it, and the README and the command line manual are all you need.

This page is for the hardware that doesn't present a node that way. Each such device has its own step-by-step manual, and this page only tells you which one is yours.

Which guide is yours

I have…	Read
a ClockworkPi PicoCalc, stock or already running Calculinux on a Luckfox Lyra, and I want MeshTerm on its own screen	MeshTerm on the PicoCalc — from the shopping list to a working machine
…and I want a radio inside it	the same manual, Phase 3 — a XIAO nRF52840 + Wio-SX1262 soldered to the Lyra's UART
a ClockworkPi uConsole with the hackergadgets AIO board — an SX1262 on the host's own SPI bus	MeshTerm on the uConsole — MeshTerm drives it directly with --spi, or a bridge service fronts it as a companion if you want it always on
a MeshCore companion on USB, BLE or Wi-Fi	nothing here — the README

The two targets have nothing in common but MeshTerm itself. The device-side scripts each manual runs live in scripts/, one folder per handheld; the index below says what every file does and which machine it runs on. Read a script before you run it; most run as root and change the machine they run on.

The scripts

scripts/ holds the device-side helpers, one folder per manual: picocalc/ for the PicoCalc — bringing up Calculinux on the Lyra, building its console font, and (under xiao-radio/) giving it a MeshCore radio over UART — and uconsole/ for the always-on bridge that fronts the uConsole's SPI-attached LoRa chip as a companion (MeshTerm can also drive that chip directly, with no script at all — the uConsole manual covers both). The manual is the walkthrough; each script's own header says what it assumes about the machine and why each step is the way it is. On the Lyra, only one program may hold /dev/ttyS1 — MeshTerm directly, or a pump in front of it, never both.

File	Runs on	What it does
picocalc/calculinux-setup.sh	the Lyra (root)	One-time bring-up: python packages, the Wi-Fi boot-scan kick, a boot clock sync (there is no RTC), the deploy user, the checkout, the venv and pip install -e ., the login PATH, and the console font. Idempotent.
picocalc/calculinux-console-font-6x12.sh	the Lyra (root)	Just the console font: builds, installs and persists the 512-glyph meshterm PSF (braille, node marks, rounded frame corners, the list cursor) and restores the stock 16-slot palette. Calls the 6×8 build below when it sits alongside. Run it alone after a MeshTerm update, from the pulled checkout (/home/meshterm/MeshTerm/scripts/picocalc/) rather than the copy made at install time.
picocalc/calculinux-console-font-6x8.sh	the Lyra (root)	The shorter-cell companion font, meshterm8 (6×8 → 53×40), for anyone who wants more rows than the 6×12 default gives. Its base bitmap is the kernel's font_6x8, so this one file and the PSF it builds are GPL-2.0-only (LICENSE.GPL-2.0 sits beside it); it reads the donor/alias/keeper tables out of the script above rather than keeping a second copy. Pick between the two fonts from MeshTerm's Preferences page.
picocalc/calculinux-wifi-set.sh	the Lyra (sudo)	Interactive Wi-Fi join: prompts for an SSID and passphrase, writes iwd's credentials, connects now. This is how a network becomes known to the boot kick.
picocalc/calculinux-radio-bridge.sh	the Lyra (root)	Unfinished, unsupported. An early UART-to-TCP pump: it serves /dev/ttyS1 on TCP port 5000 and writes a radio TCP profile. It does not route UART1 to the header pads. Superseded by xiao-radio/lyra-setup.sh, which does the routing and points MeshTerm at the serial port directly.
picocalc/xiao-radio/	see below	Everything for the XIAO nRF52840 + Wio-SX1262 radio wired to the Lyra's UART1; its bench card has the wiring table. The firmware is MeshCore, MIT-licensed — LICENSE.MeshCore sits beside the patch.
xiao-radio/build-firmware.sh	dev machine	Clones and patches MeshCore, builds the Xiao_nrf52_companion_radio_serial environment, emits the .uf2.
xiao-radio/flash.py	dev machine	Flashes the .uf2 to the XIAO over its UF2 bootloader, refusing the wrong board or SoftDevice; prints the serial-DFU command when the bootloader offers no drive.
xiao-radio/meshcore-uart1.patch	—	The two firmware hunks: the companion on nRF52 Serial1, and I²C moved off the UART pads. Not upstream yet.
xiao-radio/lyra-setup.sh	the Lyra (root)	Boot-persistent UART1 → GP4/GP5 mux service, dialout membership, and a default MeshTerm serial profile for /dev/ttyS1.
xiao-radio/uart1-mux.py	the Lyra (root)	The matrix-IO register poke that routes UART1 to the header pads, run once per boot by the service above.
uconsole/meshterm-spi-bridge	the radio host (your user)	The always-on option: runs a mesh node in software over an SPI-attached SX1262 (uConsole AIO, Waveshare HATs) and serves the companion protocol on 127.0.0.1:5000, so the node stays on the mesh while MeshTerm is closed. Setup menu, preflight, optional systemd --user service. Runs on openhop_core (preferred) or its predecessor pymc_core; see the manual for the venv it wants on a bookworm uConsole. Most people should reach for meshterm --spi instead — no script, no service, MeshTerm drives the chip itself while it runs.

The regular and picocalc platforms

MeshTerm resolves one frozen platform at boot and draws everything through it. The regular platform is a desktop or ssh terminal: 72 readable columns, truecolour, emoji, a footer hint line. The picocalc platform is a framebuffer console: 53 columns, no emoji, an F-key lane instead of a hint line, and sixteen colour slots rather than a colour space. Nothing loses its colour there: the node hue and the recency heat gradient quantise to those slots instead. It is detected from the device tree on the Lyra, and --platform picocalc or MESHTERM_PLATFORM=picocalc forces it anywhere, which is how you preview the handheld layout on a desktop:

meshterm --mock --platform picocalc     # the whole app, simulated radio, handheld layout
meshterm specimen                       # the visual language on one card
meshterm platform                       # which platform this terminal resolved to

What that platform needs from the console — a font with the glyphs the interface draws, and the stock sixteen-slot palette — is installed by the PicoCalc manual's setup script; the details are in that manual and in the scripts' own headers.