Jean-Pierre MartineauandClaude Opus 4.8
1edd4a3bf4
The viz package existed solely to render one interactive HTML chart for tx-optimize sweeps, pulling in Plotly — a heavyweight dependency serving a single artifact while every other timeline renders in-terminal via braillechart. Drop it with no replacement: delete meshterm/viz, the --viz/--no-viz flag and its render call, the now-unused output_dir setting (config field, default, loader, example), the Plotly test, and the README and pyproject references. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
59 lines
2.4 KiB
TOML
59 lines
2.4 KiB
TOML
# MeshTerm configuration.
|
|
# Copy to ~/.meshterm/config.toml (or pass --db / --port on the CLI).
|
|
#
|
|
# Profiles are optional. With no profile, no --port/--ble/--tcp, MeshTerm discovers attached
|
|
# serial devices and nearby Bluetooth companions, lets you pick one (interactively) or uses the
|
|
# single one present, and remembers the last device that connected as the default for next time.
|
|
# A network (TCP) companion isn't discoverable — name it with --tcp host:port, a TCP profile, or
|
|
# the picker's "add a network device" prompt. Define profiles below only to give your hardware
|
|
# stable aliases (e.g. --profile yagi, --profile handheld for Bluetooth, --profile wifi for TCP).
|
|
|
|
default_profile = "s3"
|
|
trace_cooldown_s = 1.0
|
|
# Automatic re-sends of a direct message that goes unacknowledged, before it's marked failed.
|
|
# 0, 1, or 2 (clamped): 0 = one shot, 2 (default) = up to three tries. Ctrl-R in chat is a
|
|
# further manual retry on top of this.
|
|
direct_message_soft_retries = 2
|
|
# Days of overheard-packet history the recorder keeps; older observations are pruned
|
|
# once per session start (0 = keep everything forever).
|
|
history_days = 365
|
|
# db_path = "C:/Users/you/meshterm/meshterm.db"
|
|
|
|
# One [profiles.<name>] block per physical companion device.
|
|
[profiles.s3]
|
|
port = "COM5"
|
|
baudrate = 115200
|
|
default_tx_power = 20
|
|
description = "XIAO ESP32-S3 + Wio SX1262 serial companion"
|
|
|
|
[profiles.yagi]
|
|
port = "COM6"
|
|
description = "Yagi repeater (reaching the wider mesh)"
|
|
|
|
[profiles.local]
|
|
port = "COM7"
|
|
description = "Local-range repeater"
|
|
|
|
[profiles.observer]
|
|
port = "COM8"
|
|
description = "XIAO observer running a bot"
|
|
|
|
# A Bluetooth LE companion: give it an `address` (from `meshterm devices`) instead of a port.
|
|
# The `transport = "ble"` line is optional — a bare `address` already implies Bluetooth.
|
|
[profiles.handheld]
|
|
address = "AA:BB:CC:DD:EE:FF"
|
|
# transport = "ble"
|
|
# ble_pin = "123456" # only if your device requires a pairing PIN
|
|
description = "Pocket handheld over Bluetooth"
|
|
|
|
# A network (TCP) companion — a WiFi board, or a meshcored-style proxy — reachable at a
|
|
# host:port. Give it a `host` (and optional `tcp_port`, default 5000); a bare `host` already
|
|
# implies TCP, so the `transport = "tcp"` line is optional. A TCP companion isn't discoverable,
|
|
# so a profile (or --tcp host:port, or the picker's "add a network device" prompt) is how you
|
|
# reach one.
|
|
[profiles.wifi]
|
|
host = "192.168.1.50"
|
|
# tcp_port = 5000
|
|
# transport = "tcp"
|
|
description = "Basestation over WiFi"
|