The Routes tab ends on a "Device route · …" row that says what the radio holds now: none (it floods), or the hop count and how the radio got it (learned, set by you, kept at a site). Enter opens one popup that turns its page: - The first page draws the route and the kept route (with why a kept route is not in the radio: its first hop went silent), then the actions: Set the route…, Keep this route (or Stop keeping it), Forget the route, Discover routes…. With no site, Keep says that it needs one and opens Outbound paths. - Set the route… turns to a picker: the suggested route first (an outbound path, then the best way on), the routes heard, no relays, and Compose…, which opens the path composer. A picked route replaces a kept route too. - Discover routes… waits for the cooldown, sends one path discovery, and shows the route each way. "Use this route" sets the route out. After a change, the Routes tab is drawn again in place, with the highlight on the row. Gallery specimens for both pages, and the glossary and features guide name device, kept, and saved routes and path discovery. Refs: #34 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
17 KiB
What MeshTerm does
This page lists each screen that the menu has, and the command that does the same job without the menu. It is the catalogue. The command line is the manual for the scripted half.
The main menu asks one question: "What would you like to do?" It has six sections. The first three sections name an action: Message, Watch, and Explore. The last three sections name whose setting it is. "This node" is the radio in your hand. "Managed nodes" are the radios that you administer over the mesh. "This app" is the program in front of you.
This page lists each interactive screen with its scripted equivalent, where one exists.
💬 Message: the people on the other end
| Feature | What it does | Scripted |
|---|---|---|
| 💬 Chat | Live full-screen messages on channels and to contacts. The transcript scrolls, the input line stays at the bottom, and sent and received messages appear together. The rooms that you joined are also here. Each post shows under the name of its author. MeshTerm stores each message. Unread counts show in the menu header. | meshterm chat send / history / list / listen |
| 📻 Channels | Create, join, reorder, mute, and share mesh channels. You can share a channel with a QR code or a meshcore:// link. If you give a channel a send scope, its messages are flooded into one region. Only the repeaters that carry that region relay them. When you change to a new device, export all the channels to a file, then import the file on the new device. The channel guide lists the public channels that MeshTerm heard, also the channels that are not on your device, and adds one with Enter. |
meshterm channels list / add / join / import / share / clear / scope / export / guide |
| 📌 Rooms | Each room server that your radio knows. A room server is a message board on a radio. It keeps the latest posts and sends you the posts that you missed. Join a room with its password. If a room does not answer, MeshTerm tells you what it knows and offers the next step to try. For example, it can send again by flood when the route that your radio learned is no longer good. When the clock of a room goes back (often after a reboot), the room sends you no new post, because each new post looks older than the ones that you have. The node page of the room then says so and offers to ask for all its posts again. | meshterm rooms list / join / forget |
| 📨 Courier | A store-and-forward outbox for contacts that you cannot reach yet. Queue a message. MeshTerm sends it when the contact is next heard, or at a time that you set. It tracks the acks, and it waits longer between each try (exponential backoff). | meshterm courier queue / list / send / cancel / clear |
| 👥 Contacts | This node and its known contacts. The screen shows a heat map of how recently each contact was heard, the counts of overheard packets, and the full public keys. The hash of each key is highlighted. The scripted listing shows only the contacts. For this node, run meshterm info, which gives much more detail. |
meshterm contacts |
📊 Watch: what the mesh is doing, and what it did
| Feature | What it does | Scripted |
|---|---|---|
| 📊 Dashboard | The live overview of the mesh. It has a two-hour chart of the activity of all packets with a pulse line, the traffic counts of the session for each packet class, and window RF health next to the live numbers of the radio. The screen updates each second. | none |
| 📰 Live feed | Each packet as it arrives, newest first. A row shows the time, the type of the packet (its parsed payload class), and what the packet is about. For an advert, that is the node. For a channel text, it is the channel. For a direct message or a request, it is sender → recipient. For a trace, it is the tag. The row also shows the reception quality and, for a scoped flood, the region of the flood. Press Enter to open a row in the packet viewer, with its route graph. | none |
| 🚨 Watchtower | A passive watcher of the nodes that you star. It gives a silence alarm when a watched node goes quiet. It warns you when the SNR of a node gets worse, and it tells you when the node returns. It also tells you when a node is heard for the first time. It runs in the background during the whole session. Alerts that you did not acknowledge show as a badge in the header. | none |
| 🕒 Clock drift | How far the clock of each node is from yours. A node with a wrong clock puts wrong times on what it sends, and only its owner can set it. The page starts with a histogram of all the offsets, from the clocks behind yours, through the clocks in sync, to the clocks ahead. Then it lists your managed nodes (the nodes whose admin password MeshTerm stores), each one always, because you can set these clocks yourself. Sync their clocks… sets the clock of each managed repeater and room server in turn, with a pause between them, in a dialog that shows the result of each one, also when its clock looks correct: a repeater with no battery loses its time at each power cycle. Then each other node whose clock is out of sync, the largest offset first. Press Enter to open the node page. In a chat, a message from a wrong clock shows the time when it arrived, with a ? mark. |
meshterm clocks |
| ⏳ Time machine | Everything that the recorder ever heard, as braille charts: reception volume, the median-SNR band, the rhythm of the hours of the day, packets and nodes for each day, and first-ever arrivals. You can switch the time window between 24h, 7d, 30d, and all time. On the PicoCalc, the windows stop at 30d. You can look at one node or at the whole mesh. | none |
| 🎧 Monitor | The app always records passively. On the command line, this command captures a window of a fixed length in the foreground. It shows each overheard packet as it arrives, and it gives a summary at the end. It transmits nothing. It only listens. | meshterm monitor --seconds 60 |
🧭 Explore: where the nodes are and how they reach each other
| Feature | What it does | Scripted |
|---|---|---|
| 🌍 Map | The nodes that have a position, plotted on a real OpenStreetMap street map. The map is drawn as Unicode braille (streets, rivers, and place names). You can pan and zoom. Repeaters are highlighted and drawn on top. When you are offline, the map shows a blank grid. | none (a map is a picture, but meshterm contacts lists the same nodes) |
| 🌐 Mesh walk | The observed shape of the mesh, which you walk one node at a time. It is a graph of evidence from trace walks, firmware routes, overheard relay chains, and the neighbour tables of repeaters. It has braille edges that are coloured by SNR, and quality bars. Press Enter to walk to a node. Press ⌫ to go back. Type to find any node. The map shows where the nodes are. The walk shows how the nodes connect. | none |
| 🎯 Trace target | A live trace screen. Select a target, and each trace streams in, hop by hop. The screen shows the running median and the reliability of each hop. You can compose a route through specific repeaters, or force one. A trace transmits exactly once, because repeaters can blacklist nodes that send bursts. To get more samples, run the trace again. | meshterm trace --target … |
| 👣 Trace path | The other half of tracing. You compose the whole circuit by hand, out and back, by the way that you choose. Then you walk it. The path composer suggests each next hop from the links that MeshTerm observed, strongest first. If you have the admin password of a repeater, the composer can also get the neighbour table of that repeater over the mesh. | meshterm trace-path --path … |
| 🧭 Outbound paths | The ways out of your node that you trust, in your order. A radio link is not the same in the two directions: a repeater that your node hears well can hear your node badly, and most of what MeshTerm knows comes from what your node hears. Thus you name the way out, one or more hops long. Each site where you take the computer (Home, Work) has its own list, and one site is active. A companion that never moves can keep its own list. The trace features then start their suggested routes on your paths. Each path shows how well its first hop hears you (out) and how well you hear it (in). Measure sends one trace out along a path and back. When your radio hears the way out of another site, the menu asks if you want to use that site. |
meshterm outbound … |
| 🧭 Device route | The route that your radio holds for each contact, on the Routes tab of the node page. The radio keeps one route for each contact and replaces it with each new one that it learns, good or bad. A route that stopped to work loses each message on it, with no error. Here you see the route and how the radio got it. You can set it (your suggested route comes first), forget it so that the next message floods, or keep it: MeshTerm then writes it back each time that the radio replaces it. A kept route belongs to the site where you are. When you change site, MeshTerm saves the routes that the radio learned at the old site, and writes them back when you return. Discover routes sends one request and shows the route in each direction. When a direct message or an admin login gets no answer on a route, its retry can go by flood. | meshterm route … |
| 🏆 Trophy case | MeshTerm scores each trace that comes home on seven boards: longest distance, farthest node, longest single leg, most nodes (with and without revisits), weakest surviving link, and biggest enclosed loop. It keeps the records for each hash width. A record walk must be a trail, which means that no link is crossed twice in the same direction. | meshterm records |
🔧 This node: the radio in your hand
| Feature | What it does | Scripted |
|---|---|---|
| 📋 Device info | The identity of the connected companion and its full radio configuration, on one screen. | meshterm info |
| 🔧 Device config | Each setting that the companion firmware has: name, radio, client repeat, auto-add, telemetry, and custom variables. MeshTerm stages your changes for review and then applies them in place. The screen also has operations on the device itself: clock sync, TOML backup and restore, the identity key, reboot, and factory reset. Each operation acts when you confirm it, and the destructive operations need a confirm step. The screen has the same layout as Repeater admin. Thus you configure the radio in your hand and a radio over the mesh in the same way. | meshterm config / config set <key> <value> / config backup / config reboot / … |
| 📡 Send advert | Announce this node to the mesh with a zero-hop advert or a flood advert. You can also share the contact card of this node as a QR code. | meshterm config advert / config share |
| 🔌 Devices | This is not a menu screen. You select the companion on the startup splash. The splash lists the serial companions and the Bluetooth LE companions. If only one companion is present, MeshTerm selects it. You can add a network (TCP) companion with host:port. MeshTerm remembers the last good default. If the link drops, MeshTerm detects it at once and offers to reconnect. meshterm devices lists what discovery finds. |
meshterm devices |
🗼 Managed nodes: the radios that you administer over the mesh
| Feature | What it does | Scripted |
|---|---|---|
| 🗼 Repeater admin | Set up remote repeaters and room servers over the mesh. First, log in with a remembered password or a password that MeshTerm asks for. A node does not answer a wrong password. Thus, when a remembered password gets no reply, MeshTerm offers to replace it, because the owner of the node possibly changed it. To forget a remembered password, press Del on its node in the node picker. To forget all of them, use Forget passwords. Then use an editor in the style of Device config, which speaks the text CLI of the node. It includes the settings that only repeaters have (TX delay, airtime factor, and advert intervals). It also has one-shot actions and a remote command line with readline. A Regions page edits the region tree of the repeater: the regions for which it relays floods, and whether it relays unscoped floods. It also edits the home scope and the default scope. | meshterm repeater-admin <node> <command…> |
| 🔖 Regions | This is not a menu screen. The node page of a repeater lists the regions that the repeater carries. MeshTerm asks the repeater one time, without a login. The repeater answers only a neighbour, or a request over a known route. The packet viewer, the message paths, and the live feed show the region of a scoped flood. | meshterm regions <node> |
| 📶 TX optimize | Sweep the transmit power of a remote node while you watch. The sweep has three steps: coarse, then refine, then verify. You see each level as it lands, and you decide whether to apply the best level. The scripted form applies the best level unless you tell it not to. | meshterm tx-optimize --path … [--no-apply] |
| 🗑 Forget passwords | Forget the remembered admin password of each managed node in one step. This includes the password of a node that is not a contact any more. You cannot undo this step, so MeshTerm asks you to type FORGET first. Then the next login to each node asks for its password again. | meshterm forget-admin-passwords --yes |
⚙ This app: the program in front of you
This is the last of the three sections. Nothing on the mesh can answer for it. Preferences is the first row because it is the only row here that changes MeshTerm. The other rows only describe it. The written pages are at the end.
| Feature | What it does | Scripted |
|---|---|---|
| ⚙ Preferences | How MeshTerm behaves, in eight groups: Device, Sending, TX optimize, Watchtower, Map, History, Display, and Diagnostics. The page stages your changes, and you save them with one action at the bottom. MeshTerm writes only the values that you changed to preferences.toml. Configuring MeshTerm has the detail. |
meshterm preferences show / set / reset |
| 🩺 Diagnostics | One block of information that each bug report starts with. It shows which build you have and how you installed it, the operating system, the terminal and its size, and the radio and its link. It also shows the verdicts from boot time that no other screen shows (icons, powerline, platform flavour, and the reasons), and how much history MeshTerm stored. It has nothing private: no keys, passwords, positions, or contact names. It describes the mesh only as counts for each table and the span of time that the tables cover. Press a to anonymize it: your account name in the home folder and the addresses of your radio and hosts are masked, and each keeps a tidbit (j*********u, DA:xx:xx:xx:7C:7C). Press s to save the block beside the log, to attach to a report. The Anonymize preference opens the page anonymized, and masks the log too. |
meshterm diagnostics [--out PATH] [--anonymize] |
| 📖 About MeshTerm | What MeshTerm is, where it came from, and the terms of its licence. It includes the map credit, the font credit, and the licence URL. | meshterm about |
| 👤 About the author | The person behind MeshTerm, on the mesh and away from it. | meshterm about-author |
| 🔗 Join Discord | The community server. The page has one invite link and a QR code of the link, which a phone can read. | meshterm discord |
| 💰 Support MeshTerm | What keeps MeshTerm going, and the ways to help it, with money and without money. | meshterm support |
Leaving MeshTerm
Quit at the bottom of the main menu leaves MeshTerm, after it asks you to confirm. Ctrl+Q asks the same question from any screen. If you press it again while the question is open, MeshTerm leaves at once.
You can also hold Esc. After one second, a box shows "Hold Esc to quit". A bar in the box fills during the next two seconds. When the bar is full, MeshTerm closes, in the same way as with Quit. If you let go before the bar is full, you return to where you were. While the box is open, MeshTerm does not start to send anything new over the radio. A message that is already going out finishes first. A quick press of Esc still goes back one screen, as always.
Holding Esc works only where MeshTerm can tell that a key is down. A terminal does not tell a program when a key comes up. MeshTerm can tell on these systems:
- Windows.
- Linux, where MeshTerm can read the input device of your keyboard. This includes the
PicoCalc, and a uConsole or other Linux computer where your user is in the
inputgroup. - The Cardputer Zero, and the emulator window for either handheld.
On a Mac, or over SSH, Esc works as it always did.