# MeshTerm configuration.
# Copy to ~/.meshterm/config.toml (or pass --db / --port on the CLI).
#
# Profiles are optional. With no profile, no --port, and no --ble, MeshTerm discovers
# attached serial devices and nearby Bluetooth companions, lets you pick one (interactively)
# or uses the single one present, and remembers the last device that connected as the default
# for next time. Define profiles below only to give your hardware stable aliases
# (e.g. --profile yagi, or --profile handheld for a Bluetooth device).

default_profile = "s3"
trace_cooldown_s = 1.0
# Automatic re-sends of a direct message that goes unacknowledged, before it's marked failed.
# 0, 1, or 2 (clamped): 0 = one shot, 2 (default) = up to three tries. Ctrl-R in chat is a
# further manual retry on top of this.
direct_message_soft_retries = 2
# Days of overheard-packet history the recorder keeps; older observations are pruned
# once per session start (0 = keep everything forever).
history_days = 365
# db_path = "C:/Users/you/meshterm/meshterm.db"
# output_dir = "C:/Users/you/meshterm/output"

# One [profiles.<name>] block per physical companion device.
[profiles.s3]
port = "COM5"
baudrate = 115200
default_tx_power = 20
description = "XIAO ESP32-S3 + Wio SX1262 serial companion"

[profiles.yagi]
port = "COM6"
description = "Yagi repeater (reaching the wider mesh)"

[profiles.local]
port = "COM7"
description = "Local-range repeater"

[profiles.observer]
port = "COM8"
description = "XIAO observer running a bot"

# A Bluetooth LE companion: give it an `address` (from `meshterm devices`) instead of a port.
# The `transport = "ble"` line is optional — a bare `address` already implies Bluetooth.
[profiles.handheld]
address = "AA:BB:CC:DD:EE:FF"
# transport = "ble"
# ble_pin = "123456"   # only if your device requires a pairing PIN
description = "Pocket handheld over Bluetooth"