# MeshTools configuration. # Copy to ~/.config/meshtools/config.toml (or pass --db / --port on the CLI). # # Profiles are optional. With no profile and no --port, MeshTools discovers attached # serial devices, lets you pick one (interactively) or uses the single one present, and # remembers the last device that connected as the default for next time. Define profiles # below only to give your hardware stable aliases (e.g. --profile yagi). default_profile = "s3" trace_cooldown_s = 1.0 # db_path = "C:/Users/you/meshtools/meshtools.db" # output_dir = "C:/Users/you/meshtools/output" # One [profiles.] block per physical companion device. [profiles.s3] port = "COM5" baudrate = 115200 default_tx_power = 20 description = "XIAO ESP32-S3 + Wio SX1262 serial companion" [profiles.yagi] port = "COM6" description = "Yagi repeater (reaching the wider mesh)" [profiles.local] port = "COM7" description = "Local-range repeater" [profiles.observer] port = "COM8" description = "XIAO observer running a bot"