Commit Graph
13 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Fable 5 0add80a821 Footers: one verb per Enter, settled in the standard
Five words had grown for one key — select, pick, open, choose, commit —
so CLAUDE.md now fixes the Enter verb by action (open pushes a screen,
select picks a value or action row, set commits a value picker) and the
outliers come along: the purge and discipline pickers say select, the
record card's action rows say select, "Esc keep current" and the three
"type filter"s were typos against existing rules (housekeeping H-008).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-29 23:13:55 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 ebb1d40361 Trace target: pick from the shared sortable list, with a TRACED lane
The target picker was a hand-rolled two-section list ("Recently traced",
then "Contacts") — the one contact enumerator in the app that didn't ride
the shared ContactListScreen. Move it onto that widget so it sorts,
filters, and steers exactly like the Contacts screen and the courier
recipient: full NAME · HEARD · PKTS · KEY lanes, Ctrl+arrow sort ring,
type-to-filter. Every node type is listed — a trace answers "can I reach
this node?" for a repeater or room, not just a companion.

The recency the old section carried becomes a first-class sortable lane:
ContactListScreen grows an optional TRACED column (opt-in via show_traced)
between name and heard, showing how long ago each node was last traced,
recency-heat coloured. It is the picker's default sort, descending, so the
most-recently-traced node leads and never-traced ones gather at the
bottom. A new repository query (target_last_traced) feeds it, folded onto
contacts the same way the old recent-targets list was.

The free-text prompt stays as the fallback when there are no contacts to
list — still the only way to trace a bare key prefix off-list.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-19 13:59:51 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 e07ef3b379 Device state: cache the picker reads that run before each screen
The session cache fixed the reads screens make on open, but opening the
heaviest screens still stalled for seconds — because the pickers and
screen-openers that run *in front of* those screens were still reading the
radio directly. The menu wraps prompt-gathering and execution in one busy
overlay, so a Trace or Chat open pays its picker's slow round-trips before
the (already-cached) screen behind it ever builds, which is why caching the
screens alone showed no improvement.

Route the interactive-open reads through ctx.devstate too:

- Chat's conversation picker read the channel-slot probe *and* the contacts
  table on every open (~5s) — both now come from the cache (channels mapped
  from the cached slots via the new _channels_from_slots, contacts served
  cached). The CLI list/send path keeps reading fresh.
- Trace and TX-optimize target pickers now read contacts from the cache.
- The repeater-admin screen and the channels manager (its slot probe, on a
  local copy so mutations still re-probe the fresh layout after invalidation)
  read through the cache.

Small, session-stable reads (self-info, build_snapshot's tuning/path-hash)
are left as direct reads — they were never the seconds.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-13 22:41:58 -04:00
Jean-Pierre MartineauandClaude Fable 5 85fc82a606 Regroup the menu: Mesh, Device management, Tools
Messaging becomes Mesh and takes in Nodes (between Channels and Map —
the "who's out there" view) and Send advert (last in section: its one
action, after its views), so everything mesh-wide lives under one
heading. Device becomes Device management and keeps the box-level
tools; Diagnostics becomes Tools.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-11 03:35:00 -04:00
Jean-Pierre MartineauandClaude Fable 5 87d2d10dff Every main-menu item leads with its own emoji
Tools gain an icon attribute — menu-only, so result windows and the
CLI keep the plain title — and the menu loop composes it into the
aligned name lane. Single-codepoint, emoji-presentation glyphs only,
so the two-cell width holds across terminals: 💬 Chat, 📻 Channels,
🌍 Map, 👥 Nodes, 📡 Send advert, 🔧 configuration, 🔨 actions,
📋 info, 🎯/👣 the traces, 🎧 Monitor, 📶 TX optimize, 🚪 Quit.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-11 03:27:35 -04:00
Jean-Pierre MartineauandClaude Fable 5 944634939f Back out of a trace to the menu; airier action rows
Esc (or Back) from the Trace target screen now returns to the main
menu instead of looping through the target picker. The action list
breathes: a blank line after Explore paths and after Sample count
groups the rows, and the previous-route stamp sits flush left under
the route instead of indented.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 23:58:44 -04:00
Jean-Pierre MartineauandClaude Fable 5 0ded99883f Trace splits in two: Trace target vs Trace path, with paced sampling
A trace is one walked path and "target" is pure UX (hardware-verified),
so the feature now splits along that line: Trace target keeps the
symmetric mirror-and-return flow (picker, Explore paths), while the new
Trace path skips the picker entirely and walks a hand-composed route —
no Auto, no Explore, Trace gated until a path exists, history recorded
under the "(path)" sentinel so composed walks never pollute the target
picker. The composer loses its mode toggle: a pinned target means
mirrored, no target means verbatim, and its preview opens as us → us.

Sampling returns, deliberately: a Sample count action (1/2/3/5/8) runs
that many traces per commit, paced by trace_cooldown_s between sends and
counted off on the in-flight dialog — never a burst. Actions reorder to
compose/explore/width/samples/trace with a Back row; the w/p/x hotkeys
retire.

Display: route nodes drop the underscore (prompt_toolkit draws U+00A0 as
"_", so name (hash) now joins with plain spaces), the composer renders
nodes exactly like the route line, the (previous · …) stamp gets its own
line, the path row ends with the displayed hop count, Explore rows lead
with the route instead of an "observed path" label, and the empty Traces
placeholder is gone.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 23:33:12 -04:00
Jean-Pierre MartineauandClaude Fable 5 ce133a321e One trace per action: retire bursts so repeaters never see us flood
Repeaters penalize (and can blacklist) nodes that burst traffic, so
every trace-transmitting surface now sends exactly one transmission
per human action: Enter on the live screen runs a single trace (the
screen still aggregates the session's medians), the scenario probe
measures each candidate path once, and the CLI drops --samples to
become a true one-shot. trace_runner.measure and the s-key sample
cycle go with it.

Also de-pollute the target picker's "Recently traced" section: the
repository now returns a short recency-ordered list instead of the
ever-growing all-time tally, and stored hex prefixes fold back to
their contact names so a node shows once.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 21:51:04 -04:00
Jean-Pierre MartineauandClaude Fable 5 f1e1896918 Composer asks the gateway: fetch a repeater's neighbour table mid-path
The topology graph gains its fourth evidence source — the only one not
derived from our own reception. A repeater we hold admin rights on
reports its neighbour table (who it hears directly, at what SNR) when
asked over the mesh, revealing links and whole nodes our radio has
never received anything from: exactly the second vantage point the
composer runs dry without, two hops out.

Probed live against YUL-Cartierville (v1.15.0) through the Waymarker
before building: firmware answers the binary NEIGHBOURS request but
silently ignores guests, so the flow is login-first, tx-optimize style
(stored password, one-time prompt, forget on rejection). An empty table
is a normal answer — the gateway's own table was empty during the probe
(confirmed via its text CLI: '-none-') — so the UI says "ask again
later" instead of erroring.

Standing on a fetchable repeater, the composer shows a "fetch
neighbours" row with the suggestions it extends; the fetch runs under
the abortable spinner dialog, persists as a runs-row-owned snapshot
(schema v8, neighbour_reports), and the composer reopens mid-thought
with the same hops and refreshed suggestions tagged N. Refetching
supersedes the old snapshot per (repeater, neighbour) pair rather than
inflating the link's sample count: a table is current state, not an
event stream.

Verified end-to-end on hardware via MeshCoreDevice over BLE (login +
fetch + clean empty-table return) and in the mock (guest refusal,
discovery of a never-heard node, composer render + hand-off). 441
tests pass; the real database migrated v7 -> v8 cleanly.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 21:25:32 -04:00
Jean-Pierre MartineauandClaude Fable 5 3502a2e09d Trace opens idle: compose the path from received topology, probe scenarios
Everything we receive carries a fragment of the mesh's shape: successful
traces crossed every link in their path (out and back — the reply retraces
the reverse path, so links read both ways), each contact's out_path is a
route the firmware distilled from received floods, and RX-logged packets
report the relay chain they rode in on. A new topology service folds those
into one undirected evidence graph (schema v7 persists packet paths).

The trace screen stops auto-starting on target pick. Enter runs a burst
under a floating tracing dialog (spinner chip, live progress, Abort); "p"
opens a hop-by-hop path composer whose suggestions are the tail's observed
neighbours, strongest link first, with raw hex entry for unseen nodes; "x"
browses ranked path scenarios (device route, direct, best observed
alternatives) and can probe them all — a measured burst per candidate,
recorded as path_candidates rows, reliability-first ranking, winner offered
for adoption.

Composed specs are outbound-only, always ending at the target's hash: the
stored data shows the firmware auto-replies along the reversed path, and
user-composed "there and back" loops (3d,f2,3d) never succeeded. Specs
collapse to a uniform per-hop width the narrowest known hash can honour.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 21:00:00 -04:00
Jean-Pierre MartineauandClaude Fable 5 d8d87d5b50 Trace becomes a live screen: pick a target, watch replies stream in
The menu's trace flow joins the living-screen pattern (chat, nodes,
map). One recency-ordered picker — recently traced targets first, then
contacts by freshness — replaces the target/samples/path prompt chain,
and the screen opens tracing immediately: each reply lands in a
newest-first log as it arrives, the route line and per-hop medians
(with SNR quality bars) update live, and Enter / s / p run another
burst, cycle the burst size, and edit the forced path without leaving
the screen. Esc steps back to the picker, chat-style. The route line
opens seeded from the target's last stored trace, so the path history
last saw shows while the first reply is still in flight.

Every burst persists exactly like a scripted run — one runs row, each
trace recorded under it — and the scripted CLI keeps its one-shot
table output unchanged.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 05:24:06 -04:00
Jean-Pierre MartineauandClaude Fable 5 a23b12f6a4 Normalize UI copy: casing, headers, descriptions, backtracking
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").

Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-09 22:51:42 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 2ec18138a7 Rename project from MeshTools to MeshTerm
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 19:40:49 -04:00